--- /dev/null
+U-Boot FIT Signature Verification
+=================================
+
+Introduction
+------------
+FIT supports hashing of images so that these hashes can be checked on
+loading. This protects against corruption of the image. However it does not
+prevent the substitution of one image for another.
+
+The signature feature allows the hash to be signed with a private key such
+that it can be verified using a public key later. Provided that the private
+key is kept secret and the public key is stored in a non-volatile place,
+any image can be verified in this way.
+
+See verified-boot.txt for more general information on verified boot.
+
+
+Concepts
+--------
+Some familiarity with public key cryptography is assumed in this section.
+
+The procedure for signing is as follows:
+
+ - hash an image in the FIT
+ - sign the hash with a private key to produce a signature
+ - store the resulting signature in the FIT
+
+The procedure for verification is:
+
+ - read the FIT
+ - obtain the public key
+ - extract the signature from the FIT
+ - hash the image from the FIT
+ - verify (with the public key) that the extracted signature matches the
+ hash
+
+The signing is generally performed by mkimage, as part of making a firmware
+image for the device. The verification is normally done in U-Boot on the
+device.
+
+
+Algorithms
+----------
+In principle any suitable algorithm can be used to sign and verify a hash.
+At present only one class of algorithms is supported: SHA1 hashing with RSA.
+This works by hashing the image to produce a 20-byte hash.
+
+While it is acceptable to bring in large cryptographic libraries such as
+openssl on the host side (e.g. mkimage), it is not desirable for U-Boot.
+For the run-time verification side, it is important to keep code and data
+size as small as possible.
+
+For this reason the RSA image verification uses pre-processed public keys
+which can be used with a very small amount of code - just some extraction
+of data from the FDT and exponentiation mod n. Code size impact is a little
+under 5KB on Tegra Seaboard, for example.
+
+It is relatively straightforward to add new algorithms if required. If
+another RSA variant is needed, then it can be added to the table in
+image-sig.c. If another algorithm is needed (such as DSA) then it can be
+placed alongside rsa.c, and its functions added to the table in image-sig.c
+also.
+
+
+Creating an RSA key and certificate
+-----------------------------------
+To create a new public key, size 2048 bits:
+
+$ openssl genrsa -F4 -out keys/dev.key 2048
+
+To create a certificate for this:
+
+$ openssl req -batch -new -x509 -key keys/dev.key -out keys/dev.crt
+
+If you like you can look at the public key also:
+
+$ openssl rsa -in keys/dev.key -pubout
+
+
+Device Tree Bindings
+--------------------
+The following properties are required in the FIT's signature node(s) to
+allow thes signer to operate. These should be added to the .its file.
+Signature nodes sit at the same level as hash nodes and are called
+signature@1, signature@2, etc.
+
+- algo: Algorithm name (e.g. "sha1,rs2048")
+
+- key-name-hint: Name of key to use for signing. The keys will normally be in
+a single directory (parameter -k to mkimage). For a given key <name>, its
+private key is stored in <name>.key and the certificate is stored in
+<name>.crt.
+
+When the image is signed, the following properties are added (mandatory):
+
+- value: The signature data (e.g. 256 bytes for 2048-bit RSA)
+
+When the image is signed, the following properties are optional:
+
+- timestamp: Time when image was signed (standard Unix time_t format)
+
+- signer-name: Name of the signer (e.g. "mkimage")
+
+- signer-version: Version string of the signer (e.g. "2013.01")
+
+- comment: Additional information about the signer or image
+
+
+Example: See sign-images.its for an example image tree source file.
+
+
+Public Key Storage
+------------------
+In order to verify an image that has been signed with a public key we need to
+have a trusted public key. This cannot be stored in the signed image, since
+it would be easy to alter. For this implementation we choose to store the
+public key in U-Boot's control FDT (using CONFIG_OF_CONTROL).
+
+Public keys should be stored as sub-nodes in a /signature node. Required
+properties are:
+
+- algo: Algorithm name (e.g. "sha1,rs2048")
+
+Optional properties are:
+
+- key-name-hint: Name of key used for signing. This is only a hint since it
+is possible for the name to be changed. Verification can proceed by checking
+all available signing keys until one matches.
+
+- required: If present this indicates that the key must be verified for the
+image / configuration to be considered valid. Only required keys are
+normally verified by the FIT image booting algorithm. Valid values are
+"image" to force verification of all images, and "conf" to force verfication
+of the selected configuration (which then relies on hashes in the images to
+verify those).
+
+Each signing algorithm has its own additional properties.
+
+For RSA the following are mandatory:
+
+- rsa,num-bits: Number of key bits (e.g. 2048)
+- rsa,modulus: Modulus (N) as a big-endian multi-word integer
+- rsa,r-squared: (2^num-bits)^2 as a big-endian multi-word integer
+- rsa,n0-inverse: -1 / modulus[0] mod 2^32
+
+
+Verification
+------------
+FITs are verified when loaded. After the configuration is selected a list
+of required images is produced. If there are 'required' public keys, then
+each image must be verified against those keys. This means that every image
+that might be used by the target needs to be signed with 'required' keys.
+
+This happens automatically as part of a bootm command when FITs are used.
+
+
+Enabling FIT Verification
+-------------------------
+In addition to the options to enable FIT itself, the following CONFIGs must
+be enabled:
+
+CONFIG_FIT_SIGNATURE - enable signing and verfication in FITs
+CONFIG_RSA - enable RSA algorithm for signing
+
+
+Testing
+-------
+An easy way to test signing and verfication is to use the test script
+provided in test/vboot/vboot_test.sh. This uses sandbox (a special version
+of U-Boot which runs under Linux) to show the operation of a 'bootm'
+command loading and verifying images.
+
+A sample run is show below:
+
+$ make O=sandbox sandbox_config
+$ make O=sandbox
+$ O=sandbox ./test/vboot/vboot_test.sh
+Simple Verified Boot Test
+=========================
+
+Please see doc/uImage.FIT/verified-boot.txt for more information
+
+Build keys
+Build FIT with signed images
+Test Verified Boot Run: unsigned signatures:: OK
+Sign images
+Test Verified Boot Run: signed images: OK
+Build FIT with signed configuration
+Test Verified Boot Run: unsigned config: OK
+Sign images
+Test Verified Boot Run: signed config: OK
+
+Test passed
+
+
+Future Work
+-----------
+- Roll-back protection using a TPM is done using the tpm command. This can
+be scripted, but we might consider a default way of doing this, built into
+bootm.
+
+
+Possible Future Work
+--------------------
+- Add support for other RSA/SHA variants, such as rsa4096,sha512.
+- Other algorithms besides RSA
+- More sandbox tests for failure modes
+- Passwords for keys/certificates
+- Perhaps implement OAEP
+- Enhance bootm to permit scripted signature verification (so that a script
+can verify an image but not actually boot it)
+
+
+Simon Glass
+sjg@chromium.org
+1-1-13
#define CONFIG_OF_LIBFDT 1
#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+/* Support FIT image signing on host */
+#define CONFIG_FIT_SIGNATURE
+
#define IMAGE_ENABLE_IGNORE 0
#define IMAGE_INDENT_STRING ""
#define FIT_IMAGES_PATH "/images"
#define FIT_CONFS_PATH "/configurations"
-/* hash node */
+/* hash/signature node */
#define FIT_HASH_NODENAME "hash"
#define FIT_ALGO_PROP "algo"
#define FIT_VALUE_PROP "value"
#define FIT_IGNORE_PROP "uboot-ignore"
+#define FIT_SIG_NODENAME "signature"
/* image node */
#define FIT_DATA_PROP "data"
uint8_t *value, int *value_len);
/*
- * At present we only support verification on the device
+ * At present we only support signing on the host, and verification on the
+ * device
*/
#if defined(CONFIG_FIT_SIGNATURE)
# ifdef USE_HOSTCC
+# define IMAGE_ENABLE_SIGN 1
# define IMAGE_ENABLE_VERIFY 0
#else
+# define IMAGE_ENABLE_SIGN 0
# define IMAGE_ENABLE_VERIFY 1
# endif
#else
+# define IMAGE_ENABLE_SIGN 0
# define IMAGE_ENABLE_VERIFY 0
#endif
#define IMAGE_ENABLE_BEST_MATCH 0
#endif
+/* Information passed to the signing routines */
+struct image_sign_info {
+ const char *keydir; /* Directory conaining keys */
+ const char *keyname; /* Name of key to use */
+ void *fit; /* Pointer to FIT blob */
+ int node_offset; /* Offset of signature node */
+ struct image_sig_algo *algo; /* Algorithm information */
+ const void *fdt_blob; /* FDT containing public keys */
+ int required_keynode; /* Node offset of key to use: -1=any */
+ const char *require_keys; /* Value for 'required' property */
+};
+
+/* A part of an image, used for hashing */
+struct image_region {
+ const void *data;
+ int size;
+};
+
+struct image_sig_algo {
+ const char *name; /* Name of algorithm */
+
+ /**
+ * sign() - calculate and return signature for given input data
+ *
+ * @info: Specifies key and FIT information
+ * @data: Pointer to the input data
+ * @data_len: Data length
+ * @sigp: Set to an allocated buffer holding the signature
+ * @sig_len: Set to length of the calculated hash
+ *
+ * This computes input data signature according to selected algorithm.
+ * Resulting signature value is placed in an allocated buffer, the
+ * pointer is returned as *sigp. The length of the calculated
+ * signature is returned via the sig_len pointer argument. The caller
+ * should free *sigp.
+ *
+ * @return: 0, on success, -ve on error
+ */
+ int (*sign)(struct image_sign_info *info,
+ const struct image_region region[],
+ int region_count, uint8_t **sigp, uint *sig_len);
+
+ /**
+ * add_verify_data() - Add verification information to FDT
+ *
+ * Add public key information to the FDT node, suitable for
+ * verification at run-time. The information added depends on the
+ * algorithm being used.
+ *
+ * @info: Specifies key and FIT information
+ * @keydest: Destination FDT blob for public key data
+ * @return: 0, on success, -ve on error
+ */
+ int (*add_verify_data)(struct image_sign_info *info, void *keydest);
+
+ /**
+ * verify() - Verify a signature against some data
+ *
+ * @info: Specifies key and FIT information
+ * @data: Pointer to the input data
+ * @data_len: Data length
+ * @sig: Signature
+ * @sig_len: Number of bytes in signature
+ * @return 0 if verified, -ve on error
+ */
+ int (*verify)(struct image_sign_info *info,
+ const struct image_region region[], int region_count,
+ uint8_t *sig, uint sig_len);
+};
+
+/**
+ * image_get_sig_algo() - Look up a signature algortihm
+ *
+ * @param name Name of algorithm
+ * @return pointer to algorithm information, or NULL if not found
+ */
+struct image_sig_algo *image_get_sig_algo(const char *name);
+
static inline int fit_image_check_target_arch(const void *fdt, int node)
{
return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT);
projects / u-boot.git / commitdiff