]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
NAND: Update 4xx NDFC driver to match updated nand subsystem
authorStefan Roese <sr@denx.de>
Sat, 5 Jan 2008 15:47:58 +0000 (16:47 +0100)
committerScott Wood <scottwood@freescale.com>
Tue, 12 Aug 2008 16:31:23 +0000 (11:31 -0500)
This patch changes the 4xx NAND driver ndfc.c to match the new
infrastructure from the updated NAND subsystem. This NAND
subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
subsystem.

Tested successfully on AMCC Sequoia and Bamboo.

Signed-off-by: Stefan Roese <sr@denx.de>
cpu/ppc4xx/ndfc.c

index 86548293152022c861c8528dbb51e9a00516b6ba..4f083d95bc10e63ea67e545866f932105f35fb19 100644 (file)
 #include <asm/io.h>
 #include <ppc4xx.h>
 
-static u8 hwctl = 0;
+/*
+ * We need to store the info, which chip-select (CS) is used for the
+ * chip number. For example on Sequoia NAND chip #0 uses
+ * CS #3.
+ */
+static int ndfc_cs[NDFC_MAX_BANKS];
 
 static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
        struct nand_chip *this = mtd->priv;
+       ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
 
-       if (ctrl & NAND_CTRL_CHANGE) {
-               if ( ctrl & NAND_CLE )
-                       hwctl |= 0x1;
-               else
-                       hwctl &= ~0x1;
-               if ( ctrl & NAND_ALE )
-                       hwctl |= 0x2;
-               else
-                       hwctl &= ~0x2;
-       }
-       if (cmd != NAND_CMD_NONE)
-               writeb(cmd, this->IO_ADDR_W);
-}
+       if (cmd == NAND_CMD_NONE)
+               return;
 
-static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
-{
-       struct nand_chip *this = mtdinfo->priv;
-       ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
-
-       return (in_8((u8 *)(base + NDFC_DATA)));
+       if (ctrl & NAND_CLE)
+               out_8((u8 *)(base + NDFC_CMD), cmd & 0xFF);
+       else
+               out_8((u8 *)(base + NDFC_ALE), cmd & 0xFF);
 }
 
 static int ndfc_dev_ready(struct mtd_info *mtdinfo)
 {
        struct nand_chip *this = mtdinfo->priv;
-       ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
-
-       while (!(in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY))
-               ;
+       ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
 
-       return 1;
+       return (in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY);
 }
 
 static void ndfc_enable_hwecc(struct mtd_info *mtdinfo, int mode)
 {
        struct nand_chip *this = mtdinfo->priv;
-       ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+       ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
        u32 ccr;
 
        ccr = in_be32((u32 *)(base + NDFC_CCR));
@@ -98,7 +88,7 @@ static int ndfc_calculate_ecc(struct mtd_info *mtdinfo,
                              const u_char *dat, u_char *ecc_code)
 {
        struct nand_chip *this = mtdinfo->priv;
-       ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+       ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
        u32 ecc;
        u8 *p = (u8 *)&ecc;
 
@@ -123,7 +113,7 @@ static int ndfc_calculate_ecc(struct mtd_info *mtdinfo,
 static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
 {
        struct nand_chip *this = mtdinfo->priv;
-       ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+       ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
        uint32_t *p = (uint32_t *) buf;
 
        for (;len > 0; len -= 4)
@@ -138,7 +128,7 @@ static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
 static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
 {
        struct nand_chip *this = mtdinfo->priv;
-       ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+       ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
        uint32_t *p = (uint32_t *) buf;
 
        for (; len > 0; len -= 4)
@@ -148,7 +138,7 @@ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len
 static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
 {
        struct nand_chip *this = mtdinfo->priv;
-       ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+       ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
        uint32_t *p = (uint32_t *) buf;
 
        for (; len > 0; len -= 4)
@@ -165,24 +155,37 @@ void board_nand_select_device(struct nand_chip *nand, int chip)
         * Don't use "chip" to address the NAND device,
         * generate the cs from the address where it is encoded.
         */
-       int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
-       ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
+       ulong base = (ulong)nand->IO_ADDR_W & 0xffffff00;
+       int cs = ndfc_cs[chip];
 
        /* Set NandFlash Core Configuration Register */
        /* 1 col x 2 rows */
        out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24));
+       out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222);
 }
 
 int board_nand_init(struct nand_chip *nand)
 {
        int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
-       ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
+       ulong base = (ulong)nand->IO_ADDR_W & 0xffffff00;
+       static int chip = 0;
 
-       nand->cmd_ctrl  = ndfc_hwcontrol;
-       nand->read_byte  = ndfc_read_byte;
-       nand->read_buf   = ndfc_read_buf;
-       nand->dev_ready  = ndfc_dev_ready;
+       /*
+        * Save chip-select for this chip #
+        */
+       ndfc_cs[chip] = cs;
 
+       /*
+        * Select required NAND chip in NDFC
+        */
+       board_nand_select_device(nand, chip);
+
+       nand->IO_ADDR_R = (void __iomem *)(base + NDFC_DATA);
+       nand->IO_ADDR_W = (void __iomem *)(base + NDFC_DATA);
+       nand->cmd_ctrl = ndfc_hwcontrol;
+       nand->chip_delay = 50;
+       nand->read_buf = ndfc_read_buf;
+       nand->dev_ready = ndfc_dev_ready;
        nand->ecc.correct = nand_correct_data;
        nand->ecc.hwctl = ndfc_enable_hwecc;
        nand->ecc.calculate = ndfc_calculate_ecc;
@@ -203,11 +206,7 @@ int board_nand_init(struct nand_chip *nand)
        mtebc(pb0ap, CFG_EBC_PB0AP);
 #endif
 
-       /*
-        * Select required NAND chip in NDFC
-        */
-       board_nand_select_device(nand, cs);
-       out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222);
+       chip++;
 
        return 0;
 }