ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_CMD_ERRATA) += cmd_errata.o
endif
-obj-$(CONFIG_CPM2) += commproc.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_FSL_CORENET) += liodn.o
obj-$(CONFIG_QE) += qe_io.o
-obj-$(CONFIG_CPM2) += serial_scc.o
obj-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o
obj-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
+++ /dev/null
-/*
- * Adapted for Motorola MPC8560 chips
- * Xianghua Xiao <x.xiao@motorola.com>
- *
- * This file is based on "arch/powerpc/8260_io/commproc.c" - here is it's
- * copyright notice:
- *
- * General Purpose functions for the global management of the
- * 8220 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- * 2.3.99 Updates
- * Copyright (c) 2003 Motorola,Inc.
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space. The allocator for that is here. When the communication
- * process is reset, we reclaim the memory available. There is
- * currently no deallocator for this memory.
- */
-#include <common.h>
-#include <asm-offsets.h>
-#include <asm/cpm_85xx.h>
-#include <asm/global_data.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * because we have stack and init data in dual port ram
- * we must reduce the size
- */
-#undef CPM_DATAONLY_SIZE
-#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
-
-void
-m8560_cpm_reset(void)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile ulong count;
-
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Reclaim the DP memory for our use.
- */
- gd->arch.dp_alloc_base = CPM_DATAONLY_BASE;
- gd->arch.dp_alloc_top = gd->arch.dp_alloc_base + CPM_DATAONLY_SIZE;
-
- /*
- * Reset CPM
- */
- cpm->im_cpm_cp.cpcr = CPM_CR_RST;
- count = 0;
- do { /* Spin until command processed */
- __asm__ __volatile__ ("eieio");
- } while ((cpm->im_cpm_cp.cpcr & CPM_CR_FLG) && ++count < 1000000);
-}
-
-/* Allocate some memory from the dual ported ram.
- * To help protocols with object alignment restrictions, we do that
- * if they ask.
- */
-uint
-m8560_cpm_dpalloc(uint size, uint align)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- uint retloc;
- uint align_mask, off;
- uint savebase;
-
- align_mask = align - 1;
- savebase = gd->arch.dp_alloc_base;
-
- off = gd->arch.dp_alloc_base & align_mask;
- if (off != 0)
- gd->arch.dp_alloc_base += (align - off);
-
- if ((off = size & align_mask) != 0)
- size += align - off;
-
- if ((gd->arch.dp_alloc_base + size) >= gd->arch.dp_alloc_top) {
- gd->arch.dp_alloc_base = savebase;
- panic("m8560_cpm_dpalloc: ran out of dual port ram!");
- }
-
- retloc = gd->arch.dp_alloc_base;
- gd->arch.dp_alloc_base += size;
-
- memset((void *)&(cpm->im_dprambase[retloc]), 0, size);
-
- return(retloc);
-}
-
-/* We also own one page of host buffer space for the allocation of
- * UART "fifos" and the like.
- */
-uint
-m8560_cpm_hostalloc(uint size, uint align)
-{
- /* the host might not even have RAM yet - just use dual port RAM */
- return (m8560_cpm_dpalloc(size, align));
-}
-
-/* Set a baud rate generator. This needs lots of work. There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks. The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers). Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK gd->arch.brg_clk
-#define BRG_UART_CLK ((BRG_INT_CLK + 15) / 16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-m8560_cpm_setbrg(uint brg, uint rate)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile uint *bp;
-
- /* This is good enough to get SMCs running.....
- */
- if (brg < 4) {
- bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
- }
- else {
- bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
- brg -= 4;
- }
- bp += brg;
- *bp = (((((BRG_UART_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-m8560_cpm_fastbrg(uint brg, uint rate, int div16)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile uint *bp;
-
- /* This is good enough to get SMCs running.....
- */
- if (brg < 4) {
- bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
- }
- else {
- bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
- brg -= 4;
- }
- bp += brg;
- *bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
- if (div16)
- *bp |= CPM_BRG_DIV16;
-}
-
-/* This function is used to set baud rate generators using an external
- * clock source and 16x oversampling.
- */
-
-void
-m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile uint *bp;
-
- if (brg < 4) {
- bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
- }
- else {
- bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
- brg -= 4;
- }
- bp += brg;
- *bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
- if (pinsel == 0)
- *bp |= CPM_BRG_EXTC_CLK3_9;
- else
- *bp |= CPM_BRG_EXTC_CLK5_15;
-}
printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
#endif
-#ifdef CONFIG_CPM2
- printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
-#endif
-
#ifdef CONFIG_QE
printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe));
#endif
}
#endif
-#ifdef CONFIG_CPM2
-void config_8560_ioports (volatile ccsr_cpm_t * cpm)
-{
- int portnum;
-
- for (portnum = 0; portnum < 4; portnum++) {
- uint pmsk = 0,
- ppar = 0,
- psor = 0,
- pdir = 0,
- podr = 0,
- pdat = 0;
- iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
- iop_conf_t *eiopc = iopc + 32;
- uint msk = 1;
-
- /*
- * NOTE:
- * index 0 refers to pin 31,
- * index 31 refers to pin 0
- */
- while (iopc < eiopc) {
- if (iopc->conf) {
- pmsk |= msk;
- if (iopc->ppar)
- ppar |= msk;
- if (iopc->psor)
- psor |= msk;
- if (iopc->pdir)
- pdir |= msk;
- if (iopc->podr)
- podr |= msk;
- if (iopc->pdat)
- pdat |= msk;
- }
-
- msk <<= 1;
- iopc++;
- }
-
- if (pmsk != 0) {
- volatile ioport_t *iop = ioport_addr (cpm, portnum);
- uint tpmsk = ~pmsk;
-
- /*
- * the (somewhat confused) paragraph at the
- * bottom of page 35-5 warns that there might
- * be "unknown behaviour" when programming
- * PSORx and PDIRx, if PPARx = 1, so I
- * decided this meant I had to disable the
- * dedicated function first, and enable it
- * last.
- */
- iop->ppar &= tpmsk;
- iop->psor = (iop->psor & tpmsk) | psor;
- iop->podr = (iop->podr & tpmsk) | podr;
- iop->pdat = (iop->pdat & tpmsk) | pdat;
- iop->pdir = (iop->pdir & tpmsk) | pdir;
- iop->ppar |= ppar;
- }
- }
-}
-#endif
-
#ifdef CONFIG_SYS_FSL_CPC
#if defined(CONFIG_RAMBOOT_PBL) || defined(CONFIG_SYS_CPC_REINIT_F)
void disable_cpc_sram(void)
#endif
#endif
-#ifdef CONFIG_CPM2
- config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
-#endif
-
init_early_memctl_regs();
-#if defined(CONFIG_CPM2)
- m8560_cpm_reset();
-#endif
-
#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
/* Config QE ioports */
config_qe_ioports();
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
-#ifdef CONFIG_CPM2
- do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
- "current-speed", gd->baudrate, 1);
-
- do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
- "clock-frequency", bd->bi_brgfreq, 1);
-#endif
-
#ifdef CONFIG_FSL_CORENET
do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
"clock-frequency", get_board_sys_clk(), 1);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2003 Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- * Modified based on 8260 for 8560.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00.
- */
-
-/*
- * Minimal serial functions needed to use one of the SCC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <asm/cpm_85xx.h>
-#include <serial.h>
-#include <asm/global_data.h>
-#include <linux/compiler.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONS_ON_SCC)
-
-#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
-
-#define SCC_INDEX 0
-#define PROFF_SCC PROFF_SCC1
-#define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
- CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */
-
-#define SCC_INDEX 1
-#define PROFF_SCC PROFF_SCC2
-#define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
- CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */
-
-#define SCC_INDEX 2
-#define PROFF_SCC PROFF_SCC3
-#define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
- CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */
-
-#define SCC_INDEX 3
-#define PROFF_SCC PROFF_SCC4
-#define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
- CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-static int mpc85xx_serial_init(void)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile ccsr_cpm_scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
- uint dpaddr;
-
- /* initialize pointers to SCC */
-
- sp = (ccsr_cpm_scc_t *) &(cpm->im_cpm_scc[SCC_INDEX]);
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
-
- /* Disable transmitter/receiver.
- */
- sp->gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- /* put the SCC channel into NMSI (non multiplexd serial interface)
- * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
- */
- cpm->im_cpm_mux.cmxscr = \
- (cpm->im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE;
-
- /* Set up the baud rate generator.
- */
- serial_setbrg ();
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- dpaddr = m8560_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rbdf = (cbd_t *)&(cpm->im_dprambase[dpaddr]);
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = BD_SC_WRAP;
-
- /* Set up the uart parameters in the parameter ram.
- */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
- up->scc_genscc.scc_rfcr = CPMFCR_EB;
- up->scc_genscc.scc_tfcr = CPMFCR_EB;
- up->scc_genscc.scc_mrblr = 1;
- up->scc_maxidl = 0;
- up->scc_brkcr = 1;
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
- up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->sccm = 0;
- sp->scce = 0xffff;
-
- /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
- */
- sp->gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
- sp->gsmrl = \
- SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
-
- /* Set CTS no flow control, 1 stop bit, 8 bit character length,
- * normal async UART mode, no parity
- */
- sp->psmr = SCU_PSMR_CL;
-
- /* execute the "Init Rx and Tx params" CP command.
- */
-
- while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver.
- */
- sp->gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
-
- return (0);
-}
-
-static void mpc85xx_serial_setbrg(void)
-{
-#if defined(CONFIG_CONS_USE_EXTC)
- m8560_cpm_extcbrg(SCC_INDEX, gd->baudrate,
- CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
-#else
- m8560_cpm_setbrg(SCC_INDEX, gd->baudrate);
-#endif
-}
-
-static void mpc85xx_serial_putc(const char c)
-{
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
-
- if (c == '\n')
- serial_putc ('\r');
-
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
- tbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_tbase]);
-
- /* Wait for last character to go.
- */
- while (tbdf->cbd_sc & BD_SC_READY)
- ;
-
- /* Load the character into the transmit buffer.
- */
- *(volatile char *)tbdf->cbd_bufaddr = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
-}
-
-static int mpc85xx_serial_getc(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- unsigned char c;
-
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
- rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
-
- /* Wait for character to show up.
- */
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- ;
-
- /* Grab the char and clear the buffer again.
- */
- c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return (c);
-}
-
-static int mpc85xx_serial_tstc(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
-
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
- rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
-
- return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
-}
-
-static struct serial_device mpc85xx_serial_drv = {
- .name = "mpc85xx_serial",
- .start = mpc85xx_serial_init,
- .stop = NULL,
- .setbrg = mpc85xx_serial_setbrg,
- .putc = mpc85xx_serial_putc,
- .puts = default_serial_puts,
- .getc = mpc85xx_serial_getc,
- .tstc = mpc85xx_serial_tstc,
-};
-
-void mpc85xx_serial_initialize(void)
-{
- serial_register(&mpc85xx_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &mpc85xx_serial_drv;
-}
-#endif /* CONFIG_CONS_ON_SCC */
sys_info_t sys_info;
#ifdef CONFIG_ARCH_MPC8544
volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
-#endif
-#if defined(CONFIG_CPM2)
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- uint sccr, dfbrg;
-
- /* set VCO = 4 * BRG */
- cpm->im_cpm_intctl.sccr &= 0xfffffffc;
- sccr = cpm->im_cpm_intctl.sccr;
- dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
#endif
get_sys_info (&sys_info);
gd->cpu_clk = sys_info.freq_processor[0];
#endif
#endif /* defined(CONFIG_FSL_ESDHC) */
-#if defined(CONFIG_CPM2)
- gd->arch.vco_out = 2*sys_info.freq_systembus;
- gd->arch.cpm_clk = gd->arch.vco_out / 2;
- gd->arch.scc_clk = gd->arch.vco_out / 4;
- gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
-#endif
-
if(gd->cpu_clk != 0) return (0);
else return (1);
}
+++ /dev/null
-/*
- * MPC85xx Communication Processor Module
- * Copyright (c) 2003,Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * MPC8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- *
- * This file contains structures and information for the communication
- * processor channels found in the dual port RAM or parameter RAM.
- * All CPM control and status is available through the MPC8260 internal
- * memory map. See immap.h for details.
- */
-#ifndef __CPM_85XX__
-#define __CPM_85XX__
-
-#include <asm/immap_85xx.h>
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST ((uint)0x80000000)
-#define CPM_CR_PAGE ((uint)0x7c000000)
-#define CPM_CR_SBLOCK ((uint)0x03e00000)
-#define CPM_CR_FLG ((uint)0x00010000)
-#define CPM_CR_MCN ((uint)0x00003fc0)
-#define CPM_CR_OPCODE ((uint)0x0000000f)
-
-/* Device sub-block and page codes.
-*/
-#define CPM_CR_SCC1_SBLOCK (0x04)
-#define CPM_CR_SCC2_SBLOCK (0x05)
-#define CPM_CR_SCC3_SBLOCK (0x06)
-#define CPM_CR_SCC4_SBLOCK (0x07)
-#define CPM_CR_SMC1_SBLOCK (0x08)
-#define CPM_CR_SMC2_SBLOCK (0x09)
-#define CPM_CR_SPI_SBLOCK (0x0a)
-#define CPM_CR_I2C_SBLOCK (0x0b)
-#define CPM_CR_TIMER_SBLOCK (0x0f)
-#define CPM_CR_RAND_SBLOCK (0x0e)
-#define CPM_CR_FCC1_SBLOCK (0x10)
-#define CPM_CR_FCC2_SBLOCK (0x11)
-#define CPM_CR_FCC3_SBLOCK (0x12)
-#define CPM_CR_MCC1_SBLOCK (0x1c)
-
-#define CPM_CR_SCC1_PAGE (0x00)
-#define CPM_CR_SCC2_PAGE (0x01)
-#define CPM_CR_SCC3_PAGE (0x02)
-#define CPM_CR_SCC4_PAGE (0x03)
-#define CPM_CR_SPI_PAGE (0x09)
-#define CPM_CR_I2C_PAGE (0x0a)
-#define CPM_CR_TIMER_PAGE (0x0a)
-#define CPM_CR_RAND_PAGE (0x0a)
-#define CPM_CR_FCC1_PAGE (0x04)
-#define CPM_CR_FCC2_PAGE (0x05)
-#define CPM_CR_FCC3_PAGE (0x06)
-#define CPM_CR_MCC1_PAGE (0x07)
-#define CPM_CR_MCC2_PAGE (0x08)
-
-/* Some opcodes (there are more...later)
-*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-
-#define mk_cr_cmd(PG, SBC, MCN, OP) \
- ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
-
-/* Dual Port RAM addresses. The first 16K is available for almost
- * any CPM use, so we put the BDs there. The first 128 bytes are
- * used for SMC1 and SMC2 parameter RAM, so we start allocating
- * BDs above that. All of this must change when we start
- * downloading RAM microcode.
- */
-#define CPM_DATAONLY_BASE ((uint)128)
-#define CPM_DP_NOSPACE ((uint)0x7FFFFFFF)
-#define CPM_FCC_SPECIAL_BASE ((uint)0x0000B000)
-#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
-
-/* The number of pages of host memory we allocate for CPM. This is
- * done early in kernel initialization to get physically contiguous
- * pages.
- */
-#define NUM_CPM_HOST_PAGES 2
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-/*extern cpm8560_t *cpmp; Pointer to comm processor */
-uint m8560_cpm_dpalloc(uint size, uint align);
-uint m8560_cpm_hostalloc(uint size, uint align);
-void m8560_cpm_setbrg(uint brg, uint rate);
-void m8560_cpm_fastbrg(uint brg, uint rate, int div16);
-void m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel);
-
-/* Buffer descriptors used by many of the CPM protocols.
-*/
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* ?? */
-
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
-#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
-#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
-#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
-#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
-
-/* Parameter RAM offsets from the base.
-*/
-#define CPM_POST_WORD_ADDR 0x80FC /* steal a long at the end of SCC1 */
-#define PROFF_SCC1 ((uint)0x8000)
-#define PROFF_SCC2 ((uint)0x8100)
-#define PROFF_SCC3 ((uint)0x8200)
-#define PROFF_SCC4 ((uint)0x8300)
-#define PROFF_FCC1 ((uint)0x8400)
-#define PROFF_FCC2 ((uint)0x8500)
-#define PROFF_FCC3 ((uint)0x8600)
-#define PROFF_MCC1 ((uint)0x8700)
-#define PROFF_MCC2 ((uint)0x8800)
-#define PROFF_SPI_BASE ((uint)0x89fc)
-#define PROFF_TIMERS ((uint)0x8ae0)
-#define PROFF_REVNUM ((uint)0x8af0)
-#define PROFF_RAND ((uint)0x8af8)
-#define PROFF_I2C_BASE ((uint)0x8afc)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PSMR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
-#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- uint scc_res1; /* Reserved */
- uint scc_res2; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PSMR when used as a UART.
-*/
-#define SCU_PSMR_FLC ((ushort)0x8000)
-#define SCU_PSMR_SL ((ushort)0x4000)
-#define SCU_PSMR_CL ((ushort)0x3000)
-#define SCU_PSMR_UM ((ushort)0x0c00)
-#define SCU_PSMR_FRZ ((ushort)0x0200)
-#define SCU_PSMR_RZS ((ushort)0x0100)
-#define SCU_PSMR_SYN ((ushort)0x0080)
-#define SCU_PSMR_DRT ((ushort)0x0040)
-#define SCU_PSMR_PEN ((ushort)0x0010)
-#define SCU_PSMR_RPM ((ushort)0x000c)
-#define SCU_PSMR_REVP ((ushort)0x0008)
-#define SCU_PSMR_TPM ((ushort)0x0003)
-#define SCU_PSMR_TEVP ((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-/* How about some FCCs.....
-*/
-#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
-#define FCC_GFMR_DIAG_LE ((uint)0x40000000)
-#define FCC_GFMR_DIAG_AE ((uint)0x80000000)
-#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
-#define FCC_GFMR_TCI ((uint)0x20000000)
-#define FCC_GFMR_TRX ((uint)0x10000000)
-#define FCC_GFMR_TTX ((uint)0x08000000)
-#define FCC_GFMR_TTX ((uint)0x08000000)
-#define FCC_GFMR_CDP ((uint)0x04000000)
-#define FCC_GFMR_CTSP ((uint)0x02000000)
-#define FCC_GFMR_CDS ((uint)0x01000000)
-#define FCC_GFMR_CTSS ((uint)0x00800000)
-#define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
-#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
-#define FCC_GFMR_SYNL_8 ((uint)0x00008000)
-#define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
-#define FCC_GFMR_RTSM ((uint)0x00002000)
-#define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
-#define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
-#define FCC_GFMR_REVD ((uint)0x00000400)
-#define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
-#define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
-#define FCC_GFMR_TCRC_16 ((uint)0x00000000)
-#define FCC_GFMR_TCRC_32 ((uint)0x00000080)
-#define FCC_GFMR_ENR ((uint)0x00000020)
-#define FCC_GFMR_ENT ((uint)0x00000010)
-#define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
-#define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
-#define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
-
-/* Generic FCC parameter ram.
-*/
-typedef struct fcc_param {
- ushort fcc_riptr; /* Rx Internal temp pointer */
- ushort fcc_tiptr; /* Tx Internal temp pointer */
- ushort fcc_res1;
- ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
- uint fcc_rstate; /* Upper byte is Func code, must be set */
- uint fcc_rbase; /* Receive BD base */
- ushort fcc_rbdstat; /* RxBD status */
- ushort fcc_rbdlen; /* RxBD down counter */
- uint fcc_rdptr; /* RxBD internal data pointer */
- uint fcc_tstate; /* Upper byte is Func code, must be set */
- uint fcc_tbase; /* Transmit BD base */
- ushort fcc_tbdstat; /* TxBD status */
- ushort fcc_tbdlen; /* TxBD down counter */
- uint fcc_tdptr; /* TxBD internal data pointer */
- uint fcc_rbptr; /* Rx BD Internal buf pointer */
- uint fcc_tbptr; /* Tx BD Internal buf pointer */
- uint fcc_rcrc; /* Rx temp CRC */
- uint fcc_res2;
- uint fcc_tcrc; /* Tx temp CRC */
-} fccp_t;
-
-
-/* Ethernet controller through FCC.
-*/
-typedef struct fcc_enet {
- fccp_t fen_genfcc;
- uint fen_statbuf; /* Internal status buffer */
- uint fen_camptr; /* CAM address */
- uint fen_cmask; /* Constant mask for CRC */
- uint fen_cpres; /* Preset CRC */
- uint fen_crcec; /* CRC Error counter */
- uint fen_alec; /* alignment error counter */
- uint fen_disfc; /* discard frame counter */
- ushort fen_retlim; /* Retry limit */
- ushort fen_retcnt; /* Retry counter */
- ushort fen_pper; /* Persistence */
- ushort fen_boffcnt; /* backoff counter */
- uint fen_gaddrh; /* Group address filter, high 32-bits */
- uint fen_gaddrl; /* Group address filter, low 32-bits */
- ushort fen_tfcstat; /* out of sequence TxBD */
- ushort fen_tfclen;
- uint fen_tfcptr;
- ushort fen_mflr; /* Maximum frame length (1518) */
- ushort fen_paddrh; /* MAC address */
- ushort fen_paddrm;
- ushort fen_paddrl;
- ushort fen_ibdcount; /* Internal BD counter */
- ushort fen_ibdstart; /* Internal BD start pointer */
- ushort fen_ibdend; /* Internal BD end pointer */
- ushort fen_txlen; /* Internal Tx frame length counter */
- uint fen_ibdbase[8]; /* Internal use */
- uint fen_iaddrh; /* Individual address filter */
- uint fen_iaddrl;
- ushort fen_minflr; /* Minimum frame length (64) */
- ushort fen_taddrh; /* Filter transfer MAC address */
- ushort fen_taddrm;
- ushort fen_taddrl;
- ushort fen_padptr; /* Pointer to pad byte buffer */
- ushort fen_cftype; /* control frame type */
- ushort fen_cfrange; /* control frame range */
- ushort fen_maxb; /* maximum BD count */
- ushort fen_maxd1; /* Max DMA1 length (1520) */
- ushort fen_maxd2; /* Max DMA2 length (1520) */
- ushort fen_maxd; /* internal max DMA count */
- ushort fen_dmacnt; /* internal DMA counter */
- uint fen_octc; /* Total octect counter */
- uint fen_colc; /* Total collision counter */
- uint fen_broc; /* Total broadcast packet counter */
- uint fen_mulc; /* Total multicast packet count */
- uint fen_uspc; /* Total packets < 64 bytes */
- uint fen_frgc; /* Total packets < 64 bytes with errors */
- uint fen_ospc; /* Total packets > 1518 */
- uint fen_jbrc; /* Total packets > 1518 with errors */
- uint fen_p64c; /* Total packets == 64 bytes */
- uint fen_p65c; /* Total packets 64 < bytes <= 127 */
- uint fen_p128c; /* Total packets 127 < bytes <= 255 */
- uint fen_p256c; /* Total packets 256 < bytes <= 511 */
- uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
- uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
- uint fen_cambuf; /* Internal CAM buffer poiner */
- ushort fen_rfthr; /* Received frames threshold */
- ushort fen_rfcnt; /* Received frames count */
-} fcc_enet_t;
-
-/* FCC Event/Mask register as used by Ethernet.
-*/
-#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
-#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
-#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
-#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* FCC Mode Register (FPSMR) as used by Ethernet.
-*/
-#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
-#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
-#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
-#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
-#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
-#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
-#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
-#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
-#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
-#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
-#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
-#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
-#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
- ushort iic_rbase; /* Rx Buffer descriptor base address */
- ushort iic_tbase; /* Tx Buffer descriptor base address */
- u_char iic_rfcr; /* Rx function code */
- u_char iic_tfcr; /* Tx function code */
- ushort iic_mrblr; /* Max receive buffer length */
- uint iic_rstate; /* Internal */
- uint iic_rdp; /* Internal */
- ushort iic_rbptr; /* Internal */
- ushort iic_rbc; /* Internal */
- uint iic_rxtmp; /* Internal */
- uint iic_tstate; /* Internal */
- uint iic_tdp; /* Internal */
- ushort iic_tbptr; /* Internal */
- ushort iic_tbc; /* Internal */
- uint iic_txtmp; /* Internal */
-} iic_t;
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res; /* Tx temp. */
- uint spi_res1[4]; /* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x) ((x) &0xF)
-
-#define SPI_EB ((u_char)0x10) /* big endian byte order */
-
-#define BD_IIC_START ((ushort)0x0400)
-
-/*-----------------------------------------------------------------------
- * CMXFCR - CMX FCC Clock Route Register 15-12
- */
-#define CMXFCR_FC1 0x40000000 /* FCC1 connection */
-#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */
-#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */
-#define CMXFCR_FC2 0x00400000 /* FCC2 connection */
-#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */
-#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */
-#define CMXFCR_FC3 0x00004000 /* FCC3 connection */
-#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */
-#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */
-
-#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */
-#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */
-#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */
-#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */
-#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */
-#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */
-#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */
-#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */
-#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */
-#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */
-#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */
-#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */
-#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */
-#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */
-#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */
-#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */
-#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */
-#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */
-#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */
-#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */
-#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */
-#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */
-#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */
-#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */
-#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */
-#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */
-#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */
-#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */
-#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */
-#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */
-#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */
-#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */
-#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */
-#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */
-#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */
-#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */
-
-#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */
-#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */
-#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */
-#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */
-#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */
-#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */
-#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */
-#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */
-
-/*-----------------------------------------------------------------------
- * CMXSCR - CMX SCC Clock Route Register 15-14
- */
-#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */
-#define CMXSCR_SC1 0x40000000 /* SCC1 connection */
-#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */
-#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */
-#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */
-#define CMXSCR_SC2 0x00400000 /* SCC2 connection */
-#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */
-#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */
-#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */
-#define CMXSCR_SC3 0x00004000 /* SCC3 connection */
-#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */
-#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */
-#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */
-#define CMXSCR_SC4 0x00000040 /* SCC4 connection */
-#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */
-#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */
-
-#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */
-#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */
-#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */
-#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */
-#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */
-#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */
-#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */
-#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */
-#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */
-#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */
-#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */
-#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */
-#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */
-#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */
-#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */
-#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */
-#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */
-#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */
-#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */
-#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */
-#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */
-#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */
-#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */
-#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */
-#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */
-#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */
-#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */
-#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */
-#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */
-#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */
-#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */
-#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */
-#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */
-#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */
-#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */
-#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */
-#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */
-#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */
-#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */
-#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */
-#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */
-#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */
-#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */
-
-#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */
-#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */
-#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */
-#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */
-#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */
-#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */
-#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */
-#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */
-#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */
-#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */
-#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */
-#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */
-#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */
-#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */
-#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */
-
-#endif /* __CPM_85XX__ */
#endif
#if defined(CONFIG_MPC8xx)
unsigned long brg_clk;
-#endif
-#if defined(CONFIG_CPM2)
- /* There are many clocks on the MPC8260 - see page 9-5 */
- unsigned long vco_out;
- unsigned long cpm_clk;
- unsigned long scc_clk;
- unsigned long brg_clk;
#endif
/* TODO: sjg@chromium.org: Should these be unslgned long? */
#if defined(CONFIG_MPC83xx)
unsigned long arbiter_event_attributes;
unsigned long arbiter_event_address;
#endif
-#if defined(CONFIG_CPM2)
- unsigned int dp_alloc_base;
- unsigned int dp_alloc_top;
-#endif
#ifdef CONFIG_SYS_FPGA_COUNT
unsigned fpga_state[CONFIG_SYS_FPGA_COUNT];
#endif
u8 res150[130892];
} ccsr_pic_t;
-/* CPM Block */
-#ifndef CONFIG_CPM2
-typedef struct ccsr_cpm {
- u8 res[262144];
-} ccsr_cpm_t;
-#else
-/*
- * DPARM
- * General SIU
- */
-typedef struct ccsr_cpm_siu {
- u8 res1[80];
- u32 smaer;
- u32 smser;
- u32 smevr;
- u8 res2[4];
- u32 lmaer;
- u32 lmser;
- u32 lmevr;
- u8 res3[2964];
-} ccsr_cpm_siu_t;
-
-/* IRQ Controller */
-typedef struct ccsr_cpm_intctl {
- u16 sicr;
- u8 res1[2];
- u32 sivec;
- u32 sipnrh;
- u32 sipnrl;
- u32 siprr;
- u32 scprrh;
- u32 scprrl;
- u32 simrh;
- u32 simrl;
- u32 siexr;
- u8 res2[88];
- u32 sccr;
- u8 res3[124];
-} ccsr_cpm_intctl_t;
-
-/* input/output port */
-typedef struct ccsr_cpm_iop {
- u32 pdira;
- u32 ppara;
- u32 psora;
- u32 podra;
- u32 pdata;
- u8 res1[12];
- u32 pdirb;
- u32 pparb;
- u32 psorb;
- u32 podrb;
- u32 pdatb;
- u8 res2[12];
- u32 pdirc;
- u32 pparc;
- u32 psorc;
- u32 podrc;
- u32 pdatc;
- u8 res3[12];
- u32 pdird;
- u32 ppard;
- u32 psord;
- u32 podrd;
- u32 pdatd;
- u8 res4[12];
-} ccsr_cpm_iop_t;
-
-/* CPM timers */
-typedef struct ccsr_cpm_timer {
- u8 tgcr1;
- u8 res1[3];
- u8 tgcr2;
- u8 res2[11];
- u16 tmr1;
- u16 tmr2;
- u16 trr1;
- u16 trr2;
- u16 tcr1;
- u16 tcr2;
- u16 tcn1;
- u16 tcn2;
- u16 tmr3;
- u16 tmr4;
- u16 trr3;
- u16 trr4;
- u16 tcr3;
- u16 tcr4;
- u16 tcn3;
- u16 tcn4;
- u16 ter1;
- u16 ter2;
- u16 ter3;
- u16 ter4;
- u8 res3[608];
-} ccsr_cpm_timer_t;
-
-/* SDMA */
-typedef struct ccsr_cpm_sdma {
- u8 sdsr;
- u8 res1[3];
- u8 sdmr;
- u8 res2[739];
-} ccsr_cpm_sdma_t;
-
-/* FCC1 */
-typedef struct ccsr_cpm_fcc1 {
- u32 gfmr;
- u32 fpsmr;
- u16 ftodr;
- u8 res1[2];
- u16 fdsr;
- u8 res2[2];
- u16 fcce;
- u8 res3[2];
- u16 fccm;
- u8 res4[2];
- u8 fccs;
- u8 res5[3];
- u8 ftirr_phy[4];
-} ccsr_cpm_fcc1_t;
-
-/* FCC2 */
-typedef struct ccsr_cpm_fcc2 {
- u32 gfmr;
- u32 fpsmr;
- u16 ftodr;
- u8 res1[2];
- u16 fdsr;
- u8 res2[2];
- u16 fcce;
- u8 res3[2];
- u16 fccm;
- u8 res4[2];
- u8 fccs;
- u8 res5[3];
- u8 ftirr_phy[4];
-} ccsr_cpm_fcc2_t;
-
-/* FCC3 */
-typedef struct ccsr_cpm_fcc3 {
- u32 gfmr;
- u32 fpsmr;
- u16 ftodr;
- u8 res1[2];
- u16 fdsr;
- u8 res2[2];
- u16 fcce;
- u8 res3[2];
- u16 fccm;
- u8 res4[2];
- u8 fccs;
- u8 res5[3];
- u8 res[36];
-} ccsr_cpm_fcc3_t;
-
-/* FCC1 extended */
-typedef struct ccsr_cpm_fcc1_ext {
- u32 firper;
- u32 firer;
- u32 firsr_h;
- u32 firsr_l;
- u8 gfemr;
- u8 res[15];
-
-} ccsr_cpm_fcc1_ext_t;
-
-/* FCC2 extended */
-typedef struct ccsr_cpm_fcc2_ext {
- u32 firper;
- u32 firer;
- u32 firsr_h;
- u32 firsr_l;
- u8 gfemr;
- u8 res[31];
-} ccsr_cpm_fcc2_ext_t;
-
-/* FCC3 extended */
-typedef struct ccsr_cpm_fcc3_ext {
- u8 gfemr;
- u8 res[47];
-} ccsr_cpm_fcc3_ext_t;
-
-/* TC layers */
-typedef struct ccsr_cpm_tmp1 {
- u8 res[496];
-} ccsr_cpm_tmp1_t;
-
-/* BRGs:5,6,7,8 */
-typedef struct ccsr_cpm_brg2 {
- u32 brgc5;
- u32 brgc6;
- u32 brgc7;
- u32 brgc8;
- u8 res[608];
-} ccsr_cpm_brg2_t;
-
-/* I2C */
-typedef struct ccsr_cpm_i2c {
- u8 i2mod;
- u8 res1[3];
- u8 i2add;
- u8 res2[3];
- u8 i2brg;
- u8 res3[3];
- u8 i2com;
- u8 res4[3];
- u8 i2cer;
- u8 res5[3];
- u8 i2cmr;
- u8 res6[331];
-} ccsr_cpm_i2c_t;
-
-/* CPM core */
-typedef struct ccsr_cpm_cp {
- u32 cpcr;
- u32 rccr;
- u8 res1[14];
- u16 rter;
- u8 res2[2];
- u16 rtmr;
- u16 rtscr;
- u8 res3[2];
- u32 rtsr;
- u8 res4[12];
-} ccsr_cpm_cp_t;
-
-/* BRGs:1,2,3,4 */
-typedef struct ccsr_cpm_brg1 {
- u32 brgc1;
- u32 brgc2;
- u32 brgc3;
- u32 brgc4;
-} ccsr_cpm_brg1_t;
-
-/* SCC1-SCC4 */
-typedef struct ccsr_cpm_scc {
- u32 gsmrl;
- u32 gsmrh;
- u16 psmr;
- u8 res1[2];
- u16 todr;
- u16 dsr;
- u16 scce;
- u8 res2[2];
- u16 sccm;
- u8 res3;
- u8 sccs;
- u8 res4[8];
-} ccsr_cpm_scc_t;
-
-typedef struct ccsr_cpm_tmp2 {
- u8 res[32];
-} ccsr_cpm_tmp2_t;
-
-/* SPI */
-typedef struct ccsr_cpm_spi {
- u16 spmode;
- u8 res1[4];
- u8 spie;
- u8 res2[3];
- u8 spim;
- u8 res3[2];
- u8 spcom;
- u8 res4[82];
-} ccsr_cpm_spi_t;
-
-/* CPM MUX */
-typedef struct ccsr_cpm_mux {
- u8 cmxsi1cr;
- u8 res1;
- u8 cmxsi2cr;
- u8 res2;
- u32 cmxfcr;
- u32 cmxscr;
- u8 res3[2];
- u16 cmxuar;
- u8 res4[16];
-} ccsr_cpm_mux_t;
-
-/* SI,MCC,etc */
-typedef struct ccsr_cpm_tmp3 {
- u8 res[58592];
-} ccsr_cpm_tmp3_t;
-
-typedef struct ccsr_cpm_iram {
- u32 iram[8192];
- u8 res[98304];
-} ccsr_cpm_iram_t;
-
-typedef struct ccsr_cpm {
- /* Some references are into the unique & known dpram spaces,
- * others are from the generic base.
- */
-#define im_dprambase im_dpram1
- u8 im_dpram1[16*1024];
- u8 res1[16*1024];
- u8 im_dpram2[16*1024];
- u8 res2[16*1024];
- ccsr_cpm_siu_t im_cpm_siu; /* SIU Configuration */
- ccsr_cpm_intctl_t im_cpm_intctl; /* IRQ Controller */
- ccsr_cpm_iop_t im_cpm_iop; /* IO Port control/status */
- ccsr_cpm_timer_t im_cpm_timer; /* CPM timers */
- ccsr_cpm_sdma_t im_cpm_sdma; /* SDMA control/status */
- ccsr_cpm_fcc1_t im_cpm_fcc1;
- ccsr_cpm_fcc2_t im_cpm_fcc2;
- ccsr_cpm_fcc3_t im_cpm_fcc3;
- ccsr_cpm_fcc1_ext_t im_cpm_fcc1_ext;
- ccsr_cpm_fcc2_ext_t im_cpm_fcc2_ext;
- ccsr_cpm_fcc3_ext_t im_cpm_fcc3_ext;
- ccsr_cpm_tmp1_t im_cpm_tmp1;
- ccsr_cpm_brg2_t im_cpm_brg2;
- ccsr_cpm_i2c_t im_cpm_i2c;
- ccsr_cpm_cp_t im_cpm_cp;
- ccsr_cpm_brg1_t im_cpm_brg1;
- ccsr_cpm_scc_t im_cpm_scc[4];
- ccsr_cpm_tmp2_t im_cpm_tmp2;
- ccsr_cpm_spi_t im_cpm_spi;
- ccsr_cpm_mux_t im_cpm_mux;
- ccsr_cpm_tmp3_t im_cpm_tmp3;
- ccsr_cpm_iram_t im_cpm_iram;
-} ccsr_cpm_t;
-#endif
-
#ifdef CONFIG_SYS_SRIO
/* Architectural regsiters */
struct rio_arch {
#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
#define CONFIG_SYS_SEC_MON_OFFSET 0xE6000
#define CONFIG_SYS_SFP_OFFSET 0xE7000
-#define CONFIG_SYS_MPC85xx_CPM_OFFSET 0x80000
#define CONFIG_SYS_FSL_QMAN_OFFSET 0x88000
#define CONFIG_SYS_FSL_BMAN_OFFSET 0x8a000
#define CONFIG_SYS_FSL_FM1_OFFSET 0x100000
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESDHC_OFFSET)
#define CONFIG_SYS_MPC8xxx_PIC_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET)
-#define CONFIG_SYS_MPC85xx_CPM_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_CPM_OFFSET)
#define CONFIG_SYS_MPC85xx_SERDES1_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES1_OFFSET)
#define CONFIG_SYS_MPC85xx_SERDES2_ADDR \
bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
-#if defined(CONFIG_CPM2)
- bd->bi_cpmfreq = gd->arch.cpm_clk;
- bd->bi_brgfreq = gd->arch.brg_clk;
- bd->bi_sccfreq = gd->arch.scc_clk;
- bd->bi_vco = gd->arch.vco_out;
-#endif /* CONFIG_CPM2 */
-
return 0;
}
puts("addressing = 32-bit\n");
#endif
board_detail();
-#if defined(CONFIG_CPM2)
- bdinfo_print_mhz("cpmfreq", bd->bi_cpmfreq);
- bdinfo_print_mhz("vco", bd->bi_vco);
- bdinfo_print_mhz("sccfreq", bd->bi_sccfreq);
- bdinfo_print_mhz("brgfreq", bd->bi_brgfreq);
-#endif
}
/* convert all clock information to MHz */
kbd->bi_intfreq /= 1000000L;
kbd->bi_busfreq /= 1000000L;
-#if defined(CONFIG_CPM2)
- kbd->bi_cpmfreq /= 1000000L;
- kbd->bi_brgfreq /= 1000000L;
- kbd->bi_sccfreq /= 1000000L;
- kbd->bi_vco /= 1000000L;
-#endif
}
}
*/
#include <common.h>
#include <asm/bitops.h>
-#include <asm/cpm_85xx.h>
#include <pci.h>
#include <dm.h>
#include <asm/fsl_law.h>
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
-#if defined(CONFIG_CPM2)
- unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
- unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
- unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
- unsigned long bi_vco; /* VCO Out from PLL, in MHz */
-#endif
#if defined(CONFIG_M68K)
unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2004, 2011 Freescale Semiconductor.
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- */
-
-/*
- * mpc8540ads board configuration file
- *
- * Please refer to doc/README.mpc85xx for more info.
- *
- * Make sure you change the MAC address and other network params first,
- * search for CONFIG_SERVERIP, etc in this file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * default CCARBAR is at 0xff700000
- * assume U-Boot is less than 0.5MB
- */
-
-#ifndef CONFIG_HAS_FEC
-#define CONFIG_HAS_FEC 1 /* 8540 has FEC */
-#endif
-
-/*
- * sysclk for MPC85xx
- *
- * Two valid values are:
- * 33000000
- * 66000000
- *
- * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
- * is likely the desired value here, so that is now the default.
- * The board, however, can run at 66MHz. In any event, this value
- * must match the settings of some switches. Details can be found
- * in the README.mpc85xxads.
- *
- * XXX -- Can't we run at 66 MHz, anyway? PCI should drop to
- * 33MHz to accommodate, based on a PCI pin.
- * Note that PCI-X won't work at 33MHz.
- */
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-#define CONFIG_BTB /* toggle branch predition */
-
-#define CONFIG_SYS_CCSRBAR 0xe0000000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
-
-/* DDR Setup */
-#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
-
-#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
-
-/* These are used when DDR doesn't use SPD. */
-#define CONFIG_SYS_SDRAM_SIZE 128 /* DDR is 128MB */
-#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 /* 0-128MB */
-#define CONFIG_SYS_DDR_CS0_CONFIG 0x80000002
-#define CONFIG_SYS_DDR_TIMING_1 0x37344321
-#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
-#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
-#define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
-#define CONFIG_SYS_DDR_INTERVAL 0x05200100 /* autocharge,no open page */
-
-/*
- * SDRAM on the Local Bus
- */
-#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
-#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
-
-#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */
-
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/*
- * Local Bus Definitions
- */
-
-/*
- * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
- *
- * For BR2, need:
- * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
- * port-size = 32-bits = BR2[19:20] = 11
- * no parity checking = BR2[21:22] = 00
- * SDRAM for MSEL = BR2[24:26] = 011
- * Valid = BR[31] = 1
- *
- * 0 4 8 12 16 20 24 28
- * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
- *
- * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
- * FIXME: the top 17 bits of BR2.
- */
-
-/*
- * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
- *
- * For OR2, need:
- * 64MB mask for AM, OR2[0:7] = 1111 1100
- * XAM, OR2[17:18] = 11
- * 9 columns OR2[19-21] = 010
- * 13 rows OR2[23-25] = 100
- * EAD set for extra time OR[31] = 1
- *
- * 0 4 8 12 16 20 24 28
- * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
- */
-
-#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
-#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
-#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
-#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/
-
-#define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_BSMA1516 \
- | LSDMR_RFCR5 \
- | LSDMR_PRETOACT3 \
- | LSDMR_ACTTORW3 \
- | LSDMR_BL8 \
- | LSDMR_WRC2 \
- | LSDMR_CL3 \
- | LSDMR_RFEN \
- )
-
-/*
- * SDRAM Controller configuration sequence.
- */
-#define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
-#define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
-#define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
-
-/*
- * 32KB, 8-bit wide for ADS config reg
- */
-#define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000)
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-
-/* Serial Port */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
-
-/* RapidIO MMU */
-#define CONFIG_SYS_RIO_MEM_VIRT 0xc0000000 /* base address */
-#define CONFIG_SYS_RIO_MEM_BUS 0xc0000000 /* base address */
-#define CONFIG_SYS_RIO_MEM_PHYS 0xc0000000
-#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
-#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
-#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
-#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */
-
-#if defined(CONFIG_PCI)
-
-#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xe0000000
- #define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
-#endif
-
-#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-
-#endif /* CONFIG_PCI */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define TSEC1_PHY_ADDR 0
-#define TSEC2_PHY_ADDR 1
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC2_FLAGS TSEC_GIGABIT
-
-#if CONFIG_HAS_FEC
-#define CONFIG_MPC85XX_FEC 1
-#define CONFIG_MPC85XX_FEC_NAME "FEC"
-#define FEC_PHY_ADDR 3
-#define FEC_PHYIDX 0
-#define FEC_FLAGS 0
-#endif
-
-/* Options are: TSEC[0-1], FEC */
-#define CONFIG_ETHPRIME "TSEC0"
-
-#endif /* CONFIG_TSEC_ENET */
-
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-/*
- * Environment Configuration
- */
-
-/* The mac addresses for all ethernet interface */
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#endif
-
-#define CONFIG_IPADDR 192.168.1.253
-
-#define CONFIG_HOSTNAME "unknown"
-#define CONFIG_ROOTPATH "/nfsroot"
-#define CONFIG_BOOTFILE "your.uImage"
-
-#define CONFIG_SERVERIP 192.168.1.1
-#define CONFIG_GATEWAYIP 192.168.1.1
-#define CONFIG_NETMASK 255.255.255.0
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consoledev=ttyS0\0" \
- "ramdiskaddr=1000000\0" \
- "ramdiskfile=your.ramdisk.u-boot\0" \
- "fdtaddr=400000\0" \
- "fdtfile=your.fdt.dtb\0"
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2004, 2011 Freescale Semiconductor.
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- */
-
-/*
- * mpc8560ads board configuration file
- *
- * Please refer to doc/README.mpc85xx for more info.
- *
- * Make sure you change the MAC address and other network params first,
- * search for CONFIG_SERVERIP, etc. in this file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/delay.h>
-
-/* High Level Configuration Options */
-#define CONFIG_CPM2 1 /* has CPM2 */
-
-/*
- * default CCARBAR is at 0xff700000
- * assume U-Boot is less than 0.5MB
- */
-
-#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
-
-/*
- * sysclk for MPC85xx
- *
- * Two valid values are:
- * 33000000
- * 66000000
- *
- * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
- * is likely the desired value here, so that is now the default.
- * The board, however, can run at 66MHz. In any event, this value
- * must match the settings of some switches. Details can be found
- * in the README.mpc85xxads.
- */
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-#define CONFIG_BTB /* toggle branch predition */
-
-#define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */
-
-#define CONFIG_SYS_CCSRBAR 0xe0000000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
-
-/* DDR Setup */
-#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
-
-#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
-
-/* These are used when DDR doesn't use SPD. */
-#define CONFIG_SYS_SDRAM_SIZE 128 /* DDR is 128MB */
-#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 /* 0-128MB */
-#define CONFIG_SYS_DDR_CS0_CONFIG 0x80000002
-#define CONFIG_SYS_DDR_TIMING_1 0x37344321
-#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
-#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
-#define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
-#define CONFIG_SYS_DDR_INTERVAL 0x05200100 /* autocharge,no open page */
-
-/*
- * SDRAM on the Local Bus
- */
-#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
-#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
-
-#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */
-
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/*
- * Local Bus Definitions
- */
-
-/*
- * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
- *
- * For BR2, need:
- * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
- * port-size = 32-bits = BR2[19:20] = 11
- * no parity checking = BR2[21:22] = 00
- * SDRAM for MSEL = BR2[24:26] = 011
- * Valid = BR[31] = 1
- *
- * 0 4 8 12 16 20 24 28
- * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
- *
- * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
- * FIXME: the top 17 bits of BR2.
- */
-
-/*
- * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
- *
- * For OR2, need:
- * 64MB mask for AM, OR2[0:7] = 1111 1100
- * XAM, OR2[17:18] = 11
- * 9 columns OR2[19-21] = 010
- * 13 rows OR2[23-25] = 100
- * EAD set for extra time OR[31] = 1
- *
- * 0 4 8 12 16 20 24 28
- * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
- */
-
-#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
-#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
-#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
-#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/
-
-#define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_BSMA1516 \
- | LSDMR_RFCR5 \
- | LSDMR_PRETOACT3 \
- | LSDMR_ACTTORW3 \
- | LSDMR_BL8 \
- | LSDMR_WRC2 \
- | LSDMR_CL3 \
- | LSDMR_RFEN \
- )
-
-/*
- * SDRAM Controller configuration sequence.
- */
-#define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
-#define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
-#define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
-
-/*
- * 32KB, 8-bit wide for ADS config reg
- */
-#define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000)
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-
-/* Serial Port */
-#define CONFIG_CONS_ON_SCC /* define if console on SCC */
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
-
-/* RapidIO MMU */
-#define CONFIG_SYS_RIO_MEM_VIRT 0xc0000000 /* base address */
-#define CONFIG_SYS_RIO_MEM_BUS 0xc0000000 /* base address */
-#define CONFIG_SYS_RIO_MEM_PHYS 0xc0000000
-#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
-#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
-#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
-#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */
-
-#if defined(CONFIG_PCI)
-
-#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xe0000000
- #define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
-#endif
-
-#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_TSEC_ENET
-
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define TSEC1_PHY_ADDR 0
-#define TSEC2_PHY_ADDR 1
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC2_FLAGS TSEC_GIGABIT
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME "TSEC0"
-
-#endif /* CONFIG_TSEC_ENET */
-
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-/*
- * Environment Configuration
- */
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_HAS_ETH3
-#endif
-
-#define CONFIG_IPADDR 192.168.1.253
-
-#define CONFIG_HOSTNAME "unknown"
-#define CONFIG_ROOTPATH "/nfsroot"
-#define CONFIG_BOOTFILE "your.uImage"
-
-#define CONFIG_SERVERIP 192.168.1.1
-#define CONFIG_GATEWAYIP 192.168.1.1
-#define CONFIG_NETMASK 255.255.255.0
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consoledev=ttyCPM\0" \
- "ramdiskaddr=1000000\0" \
- "ramdiskfile=your.ramdisk.u-boot\0" \
- "fdtaddr=400000\0" \
- "fdtfile=mpc8560ads.dtb\0"
-
-#endif /* __CONFIG_H */
projects / u-boot.git / commitdiff