config TARGET_MPC8541CDS
bool "Support MPC8541CDS"
+ select ARCH_MPC8541
config TARGET_MPC8544DS
bool "Support MPC8544DS"
config ARCH_MPC8540
bool
+config ARCH_MPC8541
+ bool
+
config ARCH_MPC8544
bool
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
/* Everything after the first generation of PQ3 parts has RSTCR */
-#if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_MPC8541) || \
+#if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_ARCH_MPC8541) || \
defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560)
unsigned long val, msr;
* for four times the clock divider values.
*/
lcrr_div *= 4;
-#elif !defined(CONFIG_ARCH_MPC8540) && !defined(CONFIG_MPC8541) && \
+#elif !defined(CONFIG_ARCH_MPC8540) && !defined(CONFIG_ARCH_MPC8541) && \
!defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560)
/*
* Yes, the entire PQ38 family use the same
* for that SOC. This information is taken from application note
* AN2919.
*/
-#if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_MPC8541) || \
+#if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_ARCH_MPC8541) || \
defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555) || \
defined(CONFIG_P1022)
gd->arch.i2c1_clk = sys_info.freq_systembus;
#define CONFIG_SYS_FSL_DDRC_GEN1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
-#elif defined(CONFIG_MPC8541)
+#elif defined(CONFIG_ARCH_MPC8541)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_DDRC_GEN1
*/
#define CPM_DATAONLY_BASE ((uint)128)
#define CPM_DP_NOSPACE ((uint)0x7FFFFFFF)
-#if defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#if defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_MPC8555)
#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000)
#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
#else /* MPC8540, MPC8560 */
#define LCRR_CLKDIV 0x0000001F
#define LCRR_CLKDIV_SHIFT 0
#if defined(CONFIG_MPC83xx) || defined(CONFIG_ARCH_MPC8540) || \
- defined(CONFIG_MPC8541) || defined (CONFIG_MPC8555) || \
- defined(CONFIG_MPC8560)
+ defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_MPC8555) || \
+ defined(CONFIG_MPC8560)
#define LCRR_CLKDIV_2 0x00000002
#define LCRR_CLKDIV_4 0x00000004
#define LCRR_CLKDIV_8 0x00000008
} ccsr_i2c_t;
#if defined(CONFIG_ARCH_MPC8540) || \
- defined(CONFIG_MPC8541) || \
+ defined(CONFIG_ARCH_MPC8541) || \
defined(CONFIG_ARCH_MPC8548) || \
defined(CONFIG_MPC8555)
/* DUART Registers */
unsigned int clk_adjust; /* Clock adjust */
unsigned int ss_en = 0; /* Source synchronous enable */
-#if defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+#if defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_MPC8555)
/* Per FSL Application Note: AN2805 */
ss_en = 1;
#endif
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-#if defined(CONFIG_MPC8555) || defined(CONFIG_MPC8541)
+#if defined(CONFIG_MPC8555) || defined(CONFIG_ARCH_MPC8541)
out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
#endif
static int kbd_read_keys(struct input_config *config)
{
#if defined(CONFIG_MPC5xxx) || defined(CONFIG_ARCH_MPC8540) || \
- defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+ defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_MPC8555)
/* no ISR is used, so received chars must be polled */
ps2ser_check();
#endif
#define CONFIG_BOOKE 1 /* BOOKE */
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_CPM2 1 /* has CPM2 */
-#define CONFIG_MPC8541 1 /* MPC8541 specific */
#define CONFIG_MPC8541CDS 1 /* MPC8541CDS board specific */
#define CONFIG_SYS_TEXT_BASE 0xfff80000
#endif /* !CONFIG_DM_KEYBOARD */
#if defined(CONFIG_MPC5xxx) || defined(CONFIG_ARCH_MPC8540) || \
- defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+ defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_MPC8555)
int ps2ser_check(void);
#endif
CONFIG_MPC83XX_GPIO_1_INIT_VALUE
CONFIG_MPC83XX_PCI2
CONFIG_MPC850
-CONFIG_MPC8541
CONFIG_MPC8541CDS
CONFIG_MPC855
CONFIG_MPC8555