configs: stm32mp13: activate command stm32prog

Activate the command stm32prog with CONFIG_CMD_STM32MPROG.
The CONFIG_SET_DFU_ALT_INFO is also activated to support
the required weak functions for the DFU virtual backen defined in
board/st/common/stm32mp_dfu.c.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
index e50e28641b0e855b086f06053de16bb182a8af5d..387dc6aac52020b0581f393cf4a3ff737508cee8 100644 (file)
--- a/configs/stm32mp13_defconfig
+++ b/configs/stm32mp13_defconfig
@@ -10,6 +10,7 @@ CONFIG_DDR_CACHEABLE_SIZE=0x8000000
 CONFIG_CMD_STM32KEY=y
 CONFIG_TARGET_ST_STM32MP13x=y
 CONFIG_ENV_OFFSET_REDUND=0x940000
+CONFIG_CMD_STM32PROG=y
 # CONFIG_ARMV7_NONSEC is not set
 CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
@@ -51,6 +52,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_DEV=-1
 CONFIG_ENV_MMC_USE_DT=y
 CONFIG_CLK_SCMI=y
+CONFIG_SET_DFU_ALT_INFO=y
 CONFIG_GPIO_HOG=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_STM32F7=y

diff --git a/include/configs/stm32mp13_common.h b/include/configs/stm32mp13_common.h
index 7c59c69e0bdca6b579c8a694d7f69c0e4adf3093..d36fbf005487bf36aae9e14d18b8757db0d51bbc 100644 (file)
--- a/include/configs/stm32mp13_common.h
+++ b/include/configs/stm32mp13_common.h
@@ -41,10 +41,14 @@
 
 /*
  * default bootcmd for stm32mp13:
+ * for serial/usb: execute the stm32prog command
  * for mmc boot (eMMC, SD card), distro boot on the same mmc device
  */
 #define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
        "echo \"Boot over ${boot_device}${boot_instance}!\";" \
+       "if test ${boot_device} = serial || test ${boot_device} = usb;" \
+       "then stm32prog ${boot_device} ${boot_instance}; " \
+       "else " \
                "run env_check;" \
                "if test ${boot_device} = mmc;" \
                "then env set boot_targets \"mmc${boot_instance}\"; fi;" \