--- /dev/null
+FastBoot Version 0.4
+----------------------
+
+The fastboot protocol is a mechanism for communicating with bootloaders
+over USB. It is designed to be very straightforward to implement, to
+allow it to be used across a wide range of devices and from hosts running
+Linux, Windows, or OSX.
+
+
+Basic Requirements
+------------------
+
+* Two bulk endpoints (in, out) are required
+* Max packet size must be 64 bytes for full-speed and 512 bytes for
+ high-speed USB
+* The protocol is entirely host-driven and synchronous (unlike the
+ multi-channel, bi-directional, asynchronous ADB protocol)
+
+
+Transport and Framing
+---------------------
+
+1. Host sends a command, which is an ascii string in a single
+ packet no greater than 64 bytes.
+
+2. Client response with a single packet no greater than 64 bytes.
+ The first four bytes of the response are "OKAY", "FAIL", "DATA",
+ or "INFO". Additional bytes may contain an (ascii) informative
+ message.
+
+ a. INFO -> the remaining 60 bytes are an informative message
+ (providing progress or diagnostic messages). They should
+ be displayed and then step #2 repeats
+
+ b. FAIL -> the requested command failed. The remaining 60 bytes
+ of the response (if present) provide a textual failure message
+ to present to the user. Stop.
+
+ c. OKAY -> the requested command completed successfully. Go to #5
+
+ d. DATA -> the requested command is ready for the data phase.
+ A DATA response packet will be 12 bytes long, in the form of
+ DATA00000000 where the 8 digit hexidecimal number represents
+ the total data size to transfer.
+
+3. Data phase. Depending on the command, the host or client will
+ send the indicated amount of data. Short packets are always
+ acceptable and zero-length packets are ignored. This phase continues
+ until the client has sent or received the number of bytes indicated
+ in the "DATA" response above.
+
+4. Client responds with a single packet no greater than 64 bytes.
+ The first four bytes of the response are "OKAY", "FAIL", or "INFO".
+ Similar to #2:
+
+ a. INFO -> display the remaining 60 bytes and return to #4
+
+ b. FAIL -> display the remaining 60 bytes (if present) as a failure
+ reason and consider the command failed. Stop.
+
+ c. OKAY -> success. Go to #5
+
+5. Success. Stop.
+
+
+Example Session
+---------------
+
+Host: "getvar:version" request version variable
+
+Client: "OKAY0.4" return version "0.4"
+
+Host: "getvar:nonexistant" request some undefined variable
+
+Client: "OKAY" return value ""
+
+Host: "download:00001234" request to send 0x1234 bytes of data
+
+Client: "DATA00001234" ready to accept data
+
+Host: < 0x1234 bytes > send data
+
+Client: "OKAY" success
+
+Host: "flash:bootloader" request to flash the data to the bootloader
+
+Client: "INFOerasing flash" indicate status / progress
+ "INFOwriting flash"
+ "OKAY" indicate success
+
+Host: "powerdown" send a command
+
+Client: "FAILunknown command" indicate failure
+
+
+Command Reference
+-----------------
+
+* Command parameters are indicated by printf-style escape sequences.
+
+* Commands are ascii strings and sent without the quotes (which are
+ for illustration only here) and without a trailing 0 byte.
+
+* Commands that begin with a lowercase letter are reserved for this
+ specification. OEM-specific commands should not begin with a
+ lowercase letter, to prevent incompatibilities with future specs.
+
+ "getvar:%s" Read a config/version variable from the bootloader.
+ The variable contents will be returned after the
+ OKAY response.
+
+ "download:%08x" Write data to memory which will be later used
+ by "boot", "ramdisk", "flash", etc. The client
+ will reply with "DATA%08x" if it has enough
+ space in RAM or "FAIL" if not. The size of
+ the download is remembered.
+
+ "verify:%08x" Send a digital signature to verify the downloaded
+ data. Required if the bootloader is "secure"
+ otherwise "flash" and "boot" will be ignored.
+
+ "flash:%s" Write the previously downloaded image to the
+ named partition (if possible).
+
+ "erase:%s" Erase the indicated partition (clear to 0xFFs)
+
+ "boot" The previously downloaded data is a boot.img
+ and should be booted according to the normal
+ procedure for a boot.img
+
+ "continue" Continue booting as normal (if possible)
+
+ "reboot" Reboot the device.
+
+ "reboot-bootloader" Reboot back into the bootloader.
+ Useful for upgrade processes that require upgrading
+ the bootloader and then upgrading other partitions
+ using the new bootloader.
+
+ "powerdown" Power off the device.
+
+
+
+Client Variables
+----------------
+
+The "getvar:%s" command is used to read client variables which
+represent various information about the device and the software
+on it.
+
+The various currently defined names are:
+
+ version Version of FastBoot protocol supported.
+ It should be "0.3" for this document.
+
+ version-bootloader Version string for the Bootloader.
+
+ version-baseband Version string of the Baseband Software
+
+ product Name of the product
+
+ serialno Product serial number
+
+ secure If the value is "yes", this is a secure
+ bootloader requiring a signature before
+ it will install or boot images.
+
+Names starting with a lowercase character are reserved by this
+specification. OEM-specific names should not start with lowercase
+characters.
--- /dev/null
+/*
+ * (C) Copyright 2008 - 2009
+ * Windriver, <www.windriver.com>
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * Copyright 2011 Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Copyright 2014 Linaro, Ltd.
+ * Rob Herring <robh@kernel.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
+#include <linux/compiler.h>
+#include <version.h>
+#include <g_dnl.h>
+
+#define FASTBOOT_VERSION "0.4"
+
+#define FASTBOOT_INTERFACE_CLASS 0xff
+#define FASTBOOT_INTERFACE_SUB_CLASS 0x42
+#define FASTBOOT_INTERFACE_PROTOCOL 0x03
+
+#define RX_ENDPOINT_MAXIMUM_PACKET_SIZE_2_0 (0x0200)
+#define RX_ENDPOINT_MAXIMUM_PACKET_SIZE_1_1 (0x0040)
+#define TX_ENDPOINT_MAXIMUM_PACKET_SIZE (0x0040)
+
+/* The 64 defined bytes plus \0 */
+#define RESPONSE_LEN (64 + 1)
+
+#define EP_BUFFER_SIZE 4096
+
+struct f_fastboot {
+ struct usb_function usb_function;
+
+ /* IN/OUT EP's and correspoinding requests */
+ struct usb_ep *in_ep, *out_ep;
+ struct usb_request *in_req, *out_req;
+};
+
+static inline struct f_fastboot *func_to_fastboot(struct usb_function *f)
+{
+ return container_of(f, struct f_fastboot, usb_function);
+}
+
+static struct f_fastboot *fastboot_func;
+static unsigned int download_size;
+static unsigned int download_bytes;
+
+static struct usb_endpoint_descriptor fs_ep_in = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = TX_ENDPOINT_MAXIMUM_PACKET_SIZE,
+ .bInterval = 0x00,
+};
+
+static struct usb_endpoint_descriptor fs_ep_out = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = RX_ENDPOINT_MAXIMUM_PACKET_SIZE_1_1,
+ .bInterval = 0x00,
+};
+
+static struct usb_endpoint_descriptor hs_ep_out = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = RX_ENDPOINT_MAXIMUM_PACKET_SIZE_2_0,
+ .bInterval = 0x00,
+};
+
+static struct usb_interface_descriptor interface_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0x00,
+ .bAlternateSetting = 0x00,
+ .bNumEndpoints = 0x02,
+ .bInterfaceClass = FASTBOOT_INTERFACE_CLASS,
+ .bInterfaceSubClass = FASTBOOT_INTERFACE_SUB_CLASS,
+ .bInterfaceProtocol = FASTBOOT_INTERFACE_PROTOCOL,
+};
+
+static struct usb_descriptor_header *fb_runtime_descs[] = {
+ (struct usb_descriptor_header *)&interface_desc,
+ (struct usb_descriptor_header *)&fs_ep_in,
+ (struct usb_descriptor_header *)&hs_ep_out,
+ NULL,
+};
+
+/*
+ * static strings, in UTF-8
+ */
+static const char fastboot_name[] = "Android Fastboot";
+
+static struct usb_string fastboot_string_defs[] = {
+ [0].s = fastboot_name,
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_fastboot = {
+ .language = 0x0409, /* en-us */
+ .strings = fastboot_string_defs,
+};
+
+static struct usb_gadget_strings *fastboot_strings[] = {
+ &stringtab_fastboot,
+ NULL,
+};
+
+static void rx_handler_command(struct usb_ep *ep, struct usb_request *req);
+
+static void fastboot_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ int status = req->status;
+ if (!status)
+ return;
+ printf("status: %d ep '%s' trans: %d\n", status, ep->name, req->actual);
+}
+
+static int fastboot_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ int id;
+ struct usb_gadget *gadget = c->cdev->gadget;
+ struct f_fastboot *f_fb = func_to_fastboot(f);
+
+ /* DYNAMIC interface numbers assignments */
+ id = usb_interface_id(c, f);
+ if (id < 0)
+ return id;
+ interface_desc.bInterfaceNumber = id;
+
+ id = usb_string_id(c->cdev);
+ if (id < 0)
+ return id;
+ fastboot_string_defs[0].id = id;
+ interface_desc.iInterface = id;
+
+ f_fb->in_ep = usb_ep_autoconfig(gadget, &fs_ep_in);
+ if (!f_fb->in_ep)
+ return -ENODEV;
+ f_fb->in_ep->driver_data = c->cdev;
+
+ f_fb->out_ep = usb_ep_autoconfig(gadget, &fs_ep_out);
+ if (!f_fb->out_ep)
+ return -ENODEV;
+ f_fb->out_ep->driver_data = c->cdev;
+
+ hs_ep_out.bEndpointAddress = fs_ep_out.bEndpointAddress;
+
+ return 0;
+}
+
+static void fastboot_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ memset(fastboot_func, 0, sizeof(*fastboot_func));
+}
+
+static void fastboot_disable(struct usb_function *f)
+{
+ struct f_fastboot *f_fb = func_to_fastboot(f);
+
+ usb_ep_disable(f_fb->out_ep);
+ usb_ep_disable(f_fb->in_ep);
+
+ if (f_fb->out_req) {
+ free(f_fb->out_req->buf);
+ usb_ep_free_request(f_fb->out_ep, f_fb->out_req);
+ f_fb->out_req = NULL;
+ }
+ if (f_fb->in_req) {
+ free(f_fb->in_req->buf);
+ usb_ep_free_request(f_fb->in_ep, f_fb->in_req);
+ f_fb->in_req = NULL;
+ }
+}
+
+static struct usb_request *fastboot_start_ep(struct usb_ep *ep)
+{
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request(ep, 0);
+ if (!req)
+ return NULL;
+
+ req->length = EP_BUFFER_SIZE;
+ req->buf = memalign(CONFIG_SYS_CACHELINE_SIZE, EP_BUFFER_SIZE);
+ if (!req->buf) {
+ usb_ep_free_request(ep, req);
+ return NULL;
+ }
+
+ memset(req->buf, 0, req->length);
+ return req;
+}
+
+static int fastboot_set_alt(struct usb_function *f,
+ unsigned interface, unsigned alt)
+{
+ int ret;
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_gadget *gadget = cdev->gadget;
+ struct f_fastboot *f_fb = func_to_fastboot(f);
+
+ debug("%s: func: %s intf: %d alt: %d\n",
+ __func__, f->name, interface, alt);
+
+ /* make sure we don't enable the ep twice */
+ if (gadget->speed == USB_SPEED_HIGH)
+ ret = usb_ep_enable(f_fb->out_ep, &hs_ep_out);
+ else
+ ret = usb_ep_enable(f_fb->out_ep, &fs_ep_out);
+ if (ret) {
+ puts("failed to enable out ep\n");
+ return ret;
+ }
+
+ f_fb->out_req = fastboot_start_ep(f_fb->out_ep);
+ if (!f_fb->out_req) {
+ puts("failed to alloc out req\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ f_fb->out_req->complete = rx_handler_command;
+
+ ret = usb_ep_enable(f_fb->in_ep, &fs_ep_in);
+ if (ret) {
+ puts("failed to enable in ep\n");
+ goto err;
+ }
+
+ f_fb->in_req = fastboot_start_ep(f_fb->in_ep);
+ if (!f_fb->in_req) {
+ puts("failed alloc req in\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ f_fb->in_req->complete = fastboot_complete;
+
+ ret = usb_ep_queue(f_fb->out_ep, f_fb->out_req, 0);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ fastboot_disable(f);
+ return ret;
+}
+
+static int fastboot_add(struct usb_configuration *c)
+{
+ struct f_fastboot *f_fb = fastboot_func;
+ int status;
+
+ debug("%s: cdev: 0x%p\n", __func__, c->cdev);
+
+ if (!f_fb) {
+ f_fb = memalign(CONFIG_SYS_CACHELINE_SIZE, sizeof(*f_fb));
+ if (!f_fb)
+ return -ENOMEM;
+
+ fastboot_func = f_fb;
+ memset(f_fb, 0, sizeof(*f_fb));
+ }
+
+ f_fb->usb_function.name = "f_fastboot";
+ f_fb->usb_function.hs_descriptors = fb_runtime_descs;
+ f_fb->usb_function.bind = fastboot_bind;
+ f_fb->usb_function.unbind = fastboot_unbind;
+ f_fb->usb_function.set_alt = fastboot_set_alt;
+ f_fb->usb_function.disable = fastboot_disable;
+ f_fb->usb_function.strings = fastboot_strings;
+
+ status = usb_add_function(c, &f_fb->usb_function);
+ if (status) {
+ free(f_fb);
+ fastboot_func = f_fb;
+ }
+
+ return status;
+}
+DECLARE_GADGET_BIND_CALLBACK(usb_dnl_fastboot, fastboot_add);
+
+int fastboot_tx_write(const char *buffer, unsigned int buffer_size)
+{
+ struct usb_request *in_req = fastboot_func->in_req;
+ int ret;
+
+ memcpy(in_req->buf, buffer, buffer_size);
+ in_req->length = buffer_size;
+ ret = usb_ep_queue(fastboot_func->in_ep, in_req, 0);
+ if (ret)
+ printf("Error %d on queue\n", ret);
+ return 0;
+}
+
+static int fastboot_tx_write_str(const char *buffer)
+{
+ return fastboot_tx_write(buffer, strlen(buffer));
+}
+
+static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
+{
+ do_reset(NULL, 0, 0, NULL);
+}
+
+static void cb_reboot(struct usb_ep *ep, struct usb_request *req)
+{
+ fastboot_func->in_req->complete = compl_do_reset;
+ fastboot_tx_write_str("OKAY");
+}
+
+static int strcmp_l1(const char *s1, const char *s2)
+{
+ if (!s1 || !s2)
+ return -1;
+ return strncmp(s1, s2, strlen(s1));
+}
+
+static void cb_getvar(struct usb_ep *ep, struct usb_request *req)
+{
+ char *cmd = req->buf;
+ char response[RESPONSE_LEN];
+ const char *s;
+
+ strcpy(response, "OKAY");
+ strsep(&cmd, ":");
+ if (!cmd) {
+ fastboot_tx_write_str("FAILmissing var");
+ return;
+ }
+
+ if (!strcmp_l1("version", cmd)) {
+ strncat(response, FASTBOOT_VERSION, sizeof(response));
+ } else if (!strcmp_l1("bootloader-version", cmd)) {
+ strncat(response, U_BOOT_VERSION, sizeof(response));
+ } else if (!strcmp_l1("downloadsize", cmd)) {
+ char str_num[12];
+
+ sprintf(str_num, "%08x", CONFIG_USB_FASTBOOT_BUF_SIZE);
+ strncat(response, str_num, sizeof(response));
+ } else if (!strcmp_l1("serialno", cmd)) {
+ s = getenv("serial#");
+ if (s)
+ strncat(response, s, sizeof(response));
+ else
+ strcpy(response, "FAILValue not set");
+ } else {
+ strcpy(response, "FAILVariable not implemented");
+ }
+ fastboot_tx_write_str(response);
+}
+
+static unsigned int rx_bytes_expected(void)
+{
+ int rx_remain = download_size - download_bytes;
+ if (rx_remain < 0)
+ return 0;
+ if (rx_remain > EP_BUFFER_SIZE)
+ return EP_BUFFER_SIZE;
+ return rx_remain;
+}
+
+#define BYTES_PER_DOT 0x20000
+static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req)
+{
+ char response[RESPONSE_LEN];
+ unsigned int transfer_size = download_size - download_bytes;
+ const unsigned char *buffer = req->buf;
+ unsigned int buffer_size = req->actual;
+
+ if (req->status != 0) {
+ printf("Bad status: %d\n", req->status);
+ return;
+ }
+
+ if (buffer_size < transfer_size)
+ transfer_size = buffer_size;
+
+ memcpy((void *)CONFIG_USB_FASTBOOT_BUF_ADDR + download_bytes,
+ buffer, transfer_size);
+
+ download_bytes += transfer_size;
+
+ /* Check if transfer is done */
+ if (download_bytes >= download_size) {
+ /*
+ * Reset global transfer variable, keep download_bytes because
+ * it will be used in the next possible flashing command
+ */
+ download_size = 0;
+ req->complete = rx_handler_command;
+ req->length = EP_BUFFER_SIZE;
+
+ sprintf(response, "OKAY");
+ fastboot_tx_write_str(response);
+
+ printf("\ndownloading of %d bytes finished\n", download_bytes);
+ } else {
+ req->length = rx_bytes_expected();
+ if (req->length < ep->maxpacket)
+ req->length = ep->maxpacket;
+ }
+
+ if (download_bytes && !(download_bytes % BYTES_PER_DOT)) {
+ putc('.');
+ if (!(download_bytes % (74 * BYTES_PER_DOT)))
+ putc('\n');
+ }
+ req->actual = 0;
+ usb_ep_queue(ep, req, 0);
+}
+
+static void cb_download(struct usb_ep *ep, struct usb_request *req)
+{
+ char *cmd = req->buf;
+ char response[RESPONSE_LEN];
+
+ strsep(&cmd, ":");
+ download_size = simple_strtoul(cmd, NULL, 16);
+ download_bytes = 0;
+
+ printf("Starting download of %d bytes\n", download_size);
+
+ if (0 == download_size) {
+ sprintf(response, "FAILdata invalid size");
+ } else if (download_size > CONFIG_USB_FASTBOOT_BUF_SIZE) {
+ download_size = 0;
+ sprintf(response, "FAILdata too large");
+ } else {
+ sprintf(response, "DATA%08x", download_size);
+ req->complete = rx_handler_dl_image;
+ req->length = rx_bytes_expected();
+ if (req->length < ep->maxpacket)
+ req->length = ep->maxpacket;
+ }
+ fastboot_tx_write_str(response);
+}
+
+static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ char boot_addr_start[12];
+ char *bootm_args[] = { "bootm", boot_addr_start, NULL };
+
+ puts("Booting kernel..\n");
+
+ sprintf(boot_addr_start, "0x%lx", load_addr);
+ do_bootm(NULL, 0, 2, bootm_args);
+
+ /* This only happens if image is somehow faulty so we start over */
+ do_reset(NULL, 0, 0, NULL);
+}
+
+static void cb_boot(struct usb_ep *ep, struct usb_request *req)
+{
+ fastboot_func->in_req->complete = do_bootm_on_complete;
+ fastboot_tx_write_str("OKAY");
+}
+
+struct cmd_dispatch_info {
+ char *cmd;
+ void (*cb)(struct usb_ep *ep, struct usb_request *req);
+};
+
+static const struct cmd_dispatch_info cmd_dispatch_info[] = {
+ {
+ .cmd = "reboot",
+ .cb = cb_reboot,
+ }, {
+ .cmd = "getvar:",
+ .cb = cb_getvar,
+ }, {
+ .cmd = "download:",
+ .cb = cb_download,
+ }, {
+ .cmd = "boot",
+ .cb = cb_boot,
+ },
+};
+
+static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
+{
+ char *cmdbuf = req->buf;
+ void (*func_cb)(struct usb_ep *ep, struct usb_request *req) = NULL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cmd_dispatch_info); i++) {
+ if (!strcmp_l1(cmd_dispatch_info[i].cmd, cmdbuf)) {
+ func_cb = cmd_dispatch_info[i].cb;
+ break;
+ }
+ }
+
+ if (!func_cb)
+ fastboot_tx_write_str("FAILunknown command");
+ else
+ func_cb(ep, req);
+
+ if (req->status == 0) {
+ *cmdbuf = '\0';
+ req->actual = 0;
+ usb_ep_queue(ep, req, 0);
+ }
+}
projects / u-boot.git / commitdiff