if ((value = (char *)va_arg(ap, uintptr_t)) == NULL)
return API_EINVAL;
- setenv(name, value);
+ env_set(name, value);
return 0;
}
strcpy(soc, "vf");
strcat(soc, soc_type);
- setenv("soc", soc);
+ env_set("soc", soc);
return 0;
}
/* Optionally save returned end to the environment */
if (argc == 4) {
sprintf(end_str, "0x%08lx", end_addr);
- setenv(argv[3], end_str);
+ env_set(argv[3], end_str);
}
} else {
return CMD_RET_USAGE;
/* In bootstrap don't use the env vars */
if (((reg & 0x3000000) >> 24) == 0x1) {
set_default_env(NULL);
- setenv("preboot", "");
+ env_set("preboot", "");
}
return opos6ul_board_late_init();
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if (is_mx7d())
- setenv("soc", "imx7d");
+ env_set("soc", "imx7d");
else
- setenv("soc", "imx7s");
+ env_set("soc", "imx7s");
#endif
return 0;
int fb_set_reboot_flag(void)
{
printf("Setting reboot to fastboot flag ...\n");
- setenv("dofastboot", "1");
+ env_set("dofastboot", "1");
env_save();
return 0;
}
printf("Warning: fastboot.cpu: unknown CPU rev: %u\n", cpu_rev);
}
- setenv("fastboot.cpu", cpu);
+ env_set("fastboot.cpu", cpu);
}
static void omap_set_fastboot_secure(void)
printf("Warning: fastboot.secure: unknown CPU sec: %u\n", dev);
}
- setenv("fastboot.secure", secure);
+ env_set("fastboot.secure", secure);
}
static void omap_set_fastboot_board_rev(void)
if (board_rev == NULL)
printf("Warning: fastboot.board_rev: unknown board revision\n");
- setenv("fastboot.board_rev", board_rev);
+ env_set("fastboot.board_rev", board_rev);
}
#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
sprintf(buf, "%u", sz_kb);
}
- setenv("fastboot.userdata_size", buf);
+ env_set("fastboot.userdata_size", buf);
}
#else
static inline void omap_set_fastboot_userdata_size(void)
snprintf(serial_string, sizeof(serial_string),
"%08x%08x", die_id[0], die_id[3]);
- setenv("serial#", serial_string);
+ env_set("serial#", serial_string);
}
}
switch (boot_mode) {
case BOOT_FASTBOOT:
printf("enter fastboot!\n");
- setenv("preboot", "setenv preboot; fastboot usb0");
+ env_set("preboot", "setenv preboot; fastboot usb0");
break;
case BOOT_UMS:
printf("enter UMS!\n");
- setenv("preboot", "setenv preboot; ums mmc 0");
+ env_set("preboot", "setenv preboot; ums mmc 0");
break;
}
}
switch (boot_mode) {
case BOOT_FASTBOOT:
printf("enter fastboot!\n");
- setenv("preboot", "setenv preboot; fastboot usb0");
+ env_set("preboot", "setenv preboot; fastboot usb0");
break;
case BOOT_UMS:
printf("enter UMS!\n");
- setenv("preboot", "setenv preboot; ums mmc 0");
+ env_set("preboot", "setenv preboot; ums mmc 0");
break;
}
}
switch (boot_mode) {
case BOOT_FASTBOOT:
printf("enter fastboot!\n");
- setenv("preboot", "setenv preboot; fastboot usb0");
+ env_set("preboot", "setenv preboot; fastboot usb0");
break;
case BOOT_UMS:
printf("enter UMS!\n");
- setenv("preboot", "setenv preboot; if mmc dev 0;"
+ env_set("preboot", "setenv preboot; if mmc dev 0;"
"then ums mmc 0; else ums mmc 1;fi");
break;
}
{
const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
const int fpga_id = socfpga_fpga_id(0);
- setenv("bootmode", bsel_str[bsel].mode);
+ env_set("bootmode", bsel_str[bsel].mode);
if (fpga_id >= 0)
- setenv("fpgatype", socfpga_fpga_model[fpga_id].var);
+ env_set("fpgatype", socfpga_fpga_model[fpga_id].var);
return socfpga_eth_reset();
}
#endif
#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
if (tegra_cpu_is_non_secure()) {
printf("CPU is in NS mode\n");
- setenv("cpu_ns_mode", "1");
+ env_set("cpu_ns_mode", "1");
} else {
- setenv("cpu_ns_mode", "");
+ env_set("cpu_ns_mode", "");
}
#endif
start_cpu_fan();
return -ENOENT;
}
- ret = setenv("ethaddr", (void *)prop);
+ ret = env_set("ethaddr", (void *)prop);
if (ret) {
printf("Failed to set ethaddr from nvtboot DTB: %d\n", ret);
return ret;
strncat(dtb_name, ".dtb", buf_len);
- return setenv("fdt_file", dtb_name);
+ return env_set("fdt_file", dtb_name);
}
int board_late_init(void)
switch (uniphier_boot_device_raw()) {
case BOOT_DEVICE_MMC1:
printf("eMMC Boot");
- setenv("bootmode", "emmcboot");
+ env_set("bootmode", "emmcboot");
break;
case BOOT_DEVICE_NAND:
printf("NAND Boot");
- setenv("bootmode", "nandboot");
+ env_set("bootmode", "nandboot");
nand_denali_wp_disable();
break;
case BOOT_DEVICE_NOR:
printf("NOR Boot");
- setenv("bootmode", "norboot");
+ env_set("bootmode", "norboot");
break;
case BOOT_DEVICE_USB:
printf("USB Boot");
- setenv("bootmode", "usbboot");
+ env_set("bootmode", "usbboot");
break;
default:
printf("Unknown");
printf("\t<not found>\n");
} else {
printf("\t%s\n", smac[3]);
- setenv("SERIAL", smac[3]);
+ env_set("SERIAL", smac[3]);
}
}
char *ret = getenv("ethaddr");
if (strcmp(ret, __stringify(CONFIG_ETHADDR)) == 0) {
- setenv("ethaddr", smac[2]);
+ env_set("ethaddr", smac[2]);
printf("\t%s (factory)\n", smac[2]);
} else {
printf("\t%s\n", ret);
}
if (strcmp(smac[1], "00:00:00:00:00:00") == 0) {
- setenv("eth1addr", smac[2]);
- setenv("eth2addr", smac[2]);
+ env_set("eth1addr", smac[2]);
+ env_set("eth2addr", smac[2]);
return 0;
}
char *ret = getenv("eth1addr");
if (strcmp(ret, __stringify(CONFIG_ETH1ADDR)) == 0) {
- setenv("eth1addr", smac[1]);
+ env_set("eth1addr", smac[1]);
printf("\t%s (factory)\n", smac[1]);
} else {
printf("\t%s\n", ret);
}
if (strcmp(smac[0], "00:00:00:00:00:00") == 0) {
- setenv("eth2addr", smac[1]);
+ env_set("eth2addr", smac[1]);
return 0;
}
char *ret = getenv("eth2addr");
if (strcmp(ret, __stringify(CONFIG_ETH2ADDR)) == 0) {
- setenv("eth2addr", smac[0]);
+ env_set("eth2addr", smac[0]);
printf("\t%s (factory)\n", smac[0]);
} else {
printf("\t%s\n", ret);
strcat(newkernelargs, mmckargs);
strcat(newkernelargs, " ");
strcat(newkernelargs, &tmp[n]);
- setenv("kernelargs", newkernelargs);
+ env_set("kernelargs", newkernelargs);
} else {
- setenv("kernelargs", mmckargs);
+ env_set("kernelargs", mmckargs);
}
}
get_arc_info();
strcat(newkernelargs, sval);
strcat(newkernelargs, " ");
strcat(newkernelargs, kval);
- setenv("kernelargs", newkernelargs);
+ env_set("kernelargs", newkernelargs);
}
} else {
printf("Error reading kernelargs env variable!\n");
lcd_position_cursor(1, 8);
lcd_puts(
"switching to network-console ... ");
- setenv("bootcmd", "run netconsole");
+ env_set("bootcmd", "run netconsole");
}
return 0;
}
lcd_position_cursor(1, 8);
lcd_puts(
"switching to network-console ... ");
- setenv("bootcmd", "run netconsole");
+ env_set("bootcmd", "run netconsole");
cnt = 4;
break;
} else if (!gpio_get_value(ESC_KEY) &&
lcd_position_cursor(1, 8);
lcd_puts(
"starting u-boot script from USB ... ");
- setenv("bootcmd", "run usbscript");
+ env_set("bootcmd", "run usbscript");
cnt = 4;
break;
} else if ((!gpio_get_value(ESC_KEY) &&
lcd_position_cursor(1, 8);
lcd_puts(
"starting script from network ... ");
- setenv("bootcmd", "run netscript");
+ env_set("bootcmd", "run netscript");
cnt = 4;
break;
} else if (!gpio_get_value(ESC_KEY)) {
lcd_position_cursor(1, 8);
lcd_puts(
"starting vxworks from network ... ");
- setenv("bootcmd", "run netboot");
+ env_set("bootcmd", "run netboot");
cnt = 4;
} else if (scratchreg == 0xCD) {
lcd_position_cursor(1, 8);
lcd_puts(
"starting script from network ... ");
- setenv("bootcmd", "run netscript");
+ env_set("bootcmd", "run netscript");
cnt = 4;
} else if (scratchreg == 0xCE) {
lcd_position_cursor(1, 8);
lcd_puts(
"starting AR from eMMC ... ");
- setenv("bootcmd", "run mmcboot");
+ env_set("bootcmd", "run mmcboot");
cnt = 4;
}
switch (cnt) {
case 0:
lcd_puts("entering BOOT-mode. ");
- setenv("bootcmd", "run defaultAR");
+ env_set("bootcmd", "run defaultAR");
buf = 0x0000;
break;
case 1:
(u32)getenv_ulong("vx_memtop", 16, gd->fb_base-0x20),
(u32)getenv_ulong("vx_romfsbase", 16, 0),
(u32)getenv_ulong("vx_romfssize", 16, 0));
- setenv("othbootargs", othbootargs);
+ env_set("othbootargs", othbootargs);
/*
* reset VBAR registers to its reset location, VxWorks 6.9.3.2 does
* expect that vectors are there, original u-boot moves them to _start
puts("no 'factory-settings / rotation' in dtb!\n");
}
snprintf(buf, sizeof(buf), "fbcon=rotate:%d", panel_info.vl_rot);
- setenv("optargs_rot", buf);
+ env_set("optargs_rot", buf);
#else
pnltmp.hactive = getenv_ulong("ds1_hactive", 10, ~0UL);
pnltmp.vactive = getenv_ulong("ds1_vactive", 10, ~0UL);
puts("EEPROM regdomain read failed.\n");
printf("Regdomain set to %s\n", rd);
- return setenv("regdomain", rd);
+ return env_set("regdomain", rd);
}
#endif
ethaddr[0], ethaddr[1], ethaddr[2],
ethaddr[3], ethaddr[4], ethaddr[5]);
printf("parsed %s = %s\n", var, val);
- setenv(var, val);
+ env_set(var, val);
}
if (!strncmp(buf + 32, SYNO_SN_TAG, strlen(SYNO_SN_TAG))) {
char *snp, *csump;
goto out_unmap;
}
printf("parsed SN = %s\n", snp);
- setenv("SN", snp);
+ env_set("SN", snp);
} else { /* old style format */
unsigned char csum = 0;
}
bufp[n] = '\0';
printf("parsed SN = %s\n", buf + 32);
- setenv("SN", buf + 32);
+ env_set("SN", buf + 32);
}
out_unmap:
unmap_physmem(buf, len);
if (reboot_mode[0] > 0 && isascii(reboot_mode[0])) {
if (!getenv("reboot-mode"))
- setenv("reboot-mode", (char *)reboot_mode);
+ env_set("reboot-mode", (char *)reboot_mode);
}
omap_reboot_mode_clear();
len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
EFUSE_SN_SIZE);
if (len == EFUSE_SN_SIZE)
- setenv("serial#", serial);
+ env_set("serial#", serial);
}
return 0;
int board_late_init(void)
{
- setenv("bootmode", boot_mode_sf ? "sf" : "emmc");
+ env_set("bootmode", boot_mode_sf ? "sf" : "emmc");
return 0;
}
if (bootmode == 7) {
my_bootdelay = getenv("nor_bootdelay");
if (my_bootdelay != NULL)
- setenv("bootdelay", my_bootdelay);
+ env_set("bootdelay", my_bootdelay);
else
- setenv("bootdelay", "-2");
+ env_set("bootdelay", "-2");
}
/* if we have the lg panel, we can initialze it now */
int misc_init_r (void)
{
- setenv("verify", "n");
+ env_set("verify", "n");
return (0);
}
*p = tolower(*p);
strcat(name, "ek.dtb");
- setenv("dtb_name", name);
+ env_set("dtb_name", name);
#endif
return 0;
}
/* depending on the phy address we can detect our board version */
if (phydev->addr == 0)
- setenv("boardver", "");
+ env_set("boardver", "");
else
- setenv("boardver", "mr");
+ env_set("boardver", "mr");
printf("using phy at %d\n", phydev->addr);
ret = fec_probe(bis, -1, base, bus, phydev);
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- setenv("board_name", "BAV335xB");
- setenv("board_rev", "B"); /* Fix me, but why bother.. */
+ env_set("board_name", "BAV335xB");
+ env_set("board_rev", "B"); /* Fix me, but why bother.. */
#endif
return 0;
}
if (value == 0) {
printf("front button activated !\n");
- setenv("harakiri", "1");
+ env_set("harakiri", "1");
}
}
{
char envvalue[ARRAY_SIZE(buttons)+1];
int numpressed = read_keys(envvalue);
- setenv("keybd", envvalue);
+ env_set("keybd", envvalue);
return numpressed == 0;
}
sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix);
cmd = getenv(cmd_name);
if (cmd) {
- setenv("preboot", cmd);
+ env_set("preboot", cmd);
return;
}
}
static void rescue_mode(void)
{
printf("Entering rescue mode..\n");
- setenv("bootsource", "rescue");
+ env_set("bootsource", "rescue");
}
static void check_push_button(void)
x = (*(volatile u32 *)CONFIG_SYS_FPGAREG_DIPSW)
& FPGAREG_MAC_MASK;
sprintf(&s[15], "%02x", x);
- setenv("ethaddr", s);
+ env_set("ethaddr", s);
}
#endif /* CONFIG_CMD_NET */
int board_late_init(void)
{
add_board_boot_modes(board_boot_modes);
- setenv("board_name", "xpress");
+ env_set("board_name", "xpress");
return 0;
}
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if (is_mx6dq())
- setenv("board_rev", "MX6Q");
+ env_set("board_rev", "MX6Q");
else
- setenv("board_rev", "MX6DL");
+ env_set("board_rev", "MX6DL");
#endif
return 0;
/* if BTN_ACQ_AL is pressed then bootdelay is changed to 60 second */
if ((in_be16(&iop->iop_pcdat) & 0x0004) == 0)
- setenv("bootdelay", "60");
+ env_set("bootdelay", "60");
return 0;
}
addr[0], addr[1], addr[2], addr[3], addr[4],
addr[5]);
- setenv("ethaddr", (char *)tmp);
+ env_set("ethaddr", (char *)tmp);
} else {
printf("Invalid MAC address read.\n");
}
add_board_boot_modes(board_boot_modes);
#endif
- setenv("board_name", BOARD_NAME);
+ env_set("board_name", BOARD_NAME);
return 0;
}
/* Set mmcblk env */
sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
- setenv("mmcroot", mmcblk);
+ env_set("mmcroot", mmcblk);
sprintf(cmd, "mmc dev %d", dev_no);
run_command(cmd, 0);
#ifdef CONFIG_ENV_IS_IN_MMC
mmc_late_init();
#endif
- setenv("modeboot", "mmcboot");
+ env_set("modeboot", "mmcboot");
break;
case IMX6_BMODE_NAND:
- setenv("modeboot", "nandboot");
+ env_set("modeboot", "nandboot");
break;
default:
- setenv("modeboot", "");
+ env_set("modeboot", "");
break;
}
if (is_mx6ul())
- setenv("console", "ttymxc0");
+ env_set("console", "ttymxc0");
else
- setenv("console", "ttymxc3");
+ env_set("console", "ttymxc3");
setenv_fdt_file();
void setenv_fdt_file(void)
{
if (is_mx6ul())
- setenv("fdt_file", "imx6ul-geam-kit.dtb");
+ env_set("fdt_file", "imx6ul-geam-kit.dtb");
}
#ifdef CONFIG_SPL_BUILD
void setenv_fdt_file(void)
{
if (is_mx6dq())
- setenv("fdt_file", "imx6q-icore.dtb");
+ env_set("fdt_file", "imx6q-icore.dtb");
else if(is_mx6dl() || is_mx6solo())
- setenv("fdt_file", "imx6dl-icore.dtb");
+ env_set("fdt_file", "imx6dl-icore.dtb");
}
#ifdef CONFIG_SPL_BUILD
void setenv_fdt_file(void)
{
if (is_mx6dq())
- setenv("fdt_file", "imx6q-icore-rqs.dtb");
+ env_set("fdt_file", "imx6q-icore-rqs.dtb");
else if(is_mx6dl() || is_mx6solo())
- setenv("fdt_file", "imx6dl-icore-rqs.dtb");
+ env_set("fdt_file", "imx6dl-icore-rqs.dtb");
}
#ifdef CONFIG_SPL_BUILD
{
if (is_mx6ul()) {
#ifdef CONFIG_ENV_IS_IN_MMC
- setenv("fdt_file", "imx6ul-isiot-emmc.dtb");
+ env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
#else
- setenv("fdt_file", "imx6ul-isiot-nand.dtb");
+ env_set("fdt_file", "imx6ul-isiot-nand.dtb");
#endif
}
}
* to continue U-Boot
*/
sprintf(buf, "%lx", img_addr);
- setenv("img_addr", buf);
+ env_set("img_addr", buf);
if (ret)
return 1;
* bootdelay = 0 (To disable Boot Prompt)
* bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script)
*/
- setenv("bootdelay", "0");
+ env_set("bootdelay", "0");
#ifdef CONFIG_ARM
- setenv("secureboot", "y");
+ env_set("secureboot", "y");
#else
- setenv("bootcmd", CONFIG_CHAIN_BOOT_CMD);
+ env_set("bootcmd", CONFIG_CHAIN_BOOT_CMD);
#endif
return 0;
* (i.e. have not yet been set)
*/
if (!getenv(enetvar))
- setenv(enetvar, ethaddr);
+ env_set(enetvar, ethaddr);
}
}
buf[i * 6 + 4], buf[i * 6 + 5]);
sprintf((char *)enetvar,
i ? "eth%daddr" : "ethaddr", i);
- setenv((char *)enetvar, str);
+ env_set((char *)enetvar, str);
}
}
}
if (!p)
return -ENODEV;
- setenv("fdt_file", "imx53-qsb.dtb");
+ env_set("fdt_file", "imx53-qsb.dtb");
/* Set VDDA to 1.25V */
val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
if (!p)
return -ENODEV;
- setenv("fdt_file", "imx53-qsrb.dtb");
+ env_set("fdt_file", "imx53-qsrb.dtb");
/* Set VDDGP to 1.25V for 1GHz on SW1 */
pmic_reg_read(p, REG_SW_0, &val);
#endif
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- setenv("board_name", "SABREAUTO");
+ env_set("board_name", "SABREAUTO");
if (is_mx6dqp())
- setenv("board_rev", "MX6QP");
+ env_set("board_rev", "MX6QP");
else if (is_mx6dq())
- setenv("board_rev", "MX6Q");
+ env_set("board_rev", "MX6Q");
else if (is_mx6sdl())
- setenv("board_rev", "MX6DL");
+ env_set("board_rev", "MX6DL");
#endif
return 0;
#endif
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- setenv("board_name", "SABRESD");
+ env_set("board_name", "SABRESD");
if (is_mx6dqp())
- setenv("board_rev", "MX6QP");
+ env_set("board_rev", "MX6QP");
else if (is_mx6dq())
- setenv("board_rev", "MX6Q");
+ env_set("board_rev", "MX6Q");
else if (is_mx6sdl())
- setenv("board_rev", "MX6DL");
+ env_set("board_rev", "MX6DL");
#endif
return 0;
#endif
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- setenv("board_name", "EVK");
+ env_set("board_name", "EVK");
if (is_mx6ul_9x9_evk())
- setenv("board_rev", "9X9");
+ env_set("board_rev", "9X9");
else
- setenv("board_rev", "14X14");
+ env_set("board_rev", "14X14");
#endif
return 0;
#endif
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- setenv("board_name", "EVK");
- setenv("board_rev", "14X14");
+ env_set("board_name", "EVK");
+ env_set("board_rev", "14X14");
#endif
return 0;
if (!getenv("ethprime")) {
struct eth_device *dev = eth_get_dev_by_index(0);
if (dev) {
- setenv("ethprime", dev->name);
+ env_set("ethprime", dev->name);
printf("set ethprime to %s\n", getenv("ethprime"));
}
}
if (p)
quiet = simple_strtol(p, NULL, 10);
else
- setenv("quiet", "0");
+ env_set("quiet", "0");
puts("\nGateworks Corporation Copyright 2014\n");
if (info->model[0]) {
else if (is_cpu_type(MXC_CPU_MX6DL) ||
is_cpu_type(MXC_CPU_MX6SOLO))
cputype = "imx6dl";
- setenv("soctype", cputype);
+ env_set("soctype", cputype);
if (8 << (ventana_info.nand_flash_size-1) >= 2048)
- setenv("flash_layout", "large");
+ env_set("flash_layout", "large");
else
- setenv("flash_layout", "normal");
+ env_set("flash_layout", "normal");
memset(str, 0, sizeof(str));
for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++)
str[i] = tolower(info->model[i]);
- setenv("model", str);
+ env_set("model", str);
if (!getenv("fdt_file")) {
sprintf(fdt, "%s-%s.dtb", cputype, str);
- setenv("fdt_file", fdt);
+ env_set("fdt_file", fdt);
}
p = strchr(str, '-');
if (p) {
*p++ = 0;
- setenv("model_base", str);
+ env_set("model_base", str);
sprintf(fdt, "%s-%s.dtb", cputype, str);
- setenv("fdt_file1", fdt);
+ env_set("fdt_file1", fdt);
if (board_type != GW551x &&
board_type != GW552x &&
board_type != GW553x &&
str[5] = 'x';
str[6] = 0;
sprintf(fdt, "%s-%s.dtb", cputype, str);
- setenv("fdt_file2", fdt);
+ env_set("fdt_file2", fdt);
}
/* initialize env from EEPROM */
/* board serial-number */
sprintf(str, "%6d", info->serial);
- setenv("serial#", str);
+ env_set("serial#", str);
/* memory MB */
sprintf(str, "%d", (int) (gd->ram_size >> 20));
- setenv("mem_mb", str);
+ env_set("mem_mb", str);
}
/* Set a non-initialized hwconfig based on board configuration */
if (strlen(buf) + strlen(buf1) < sizeof(buf))
strcat(buf, buf1);
}
- setenv("hwconfig", buf);
+ env_set("hwconfig", buf);
}
/* setup baseboard specific GPIO based on board and env */
/* Set mmcblk env */
sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw",
dev_no);
- setenv("mmcroot", mmcblk);
+ env_set("mmcroot", mmcblk);
sprintf(cmd, "mmc dev %d", dev_no);
run_command(cmd, 0);
sprintf(envbuffer, "bootcmd%d", boot_choice);
if (getenv(envbuffer)) {
sprintf(envbuffer, "run bootcmd%d", boot_choice);
- setenv("bootcmd", envbuffer);
+ env_set("bootcmd", envbuffer);
} else
- setenv("bootcmd", "");
+ env_set("bootcmd", "");
return 0;
}
if (gpio_get_value(HOT_WATER_BUTTON))
return 0;
- setenv("bootcmd", "run swupdate");
+ env_set("bootcmd", "run swupdate");
return 0;
}
snprintf(usb0addr, sizeof(usb0addr), "02:00:86:%02x:%02x:%02x",
ssn[13], ssn[14], ssn[15]);
- setenv("usb0addr", usb0addr);
+ env_set("usb0addr", usb0addr);
for (i = 0; i < 16; i++)
snprintf(&serial[2 * i], 3, "%02x", ssn[i]);
- setenv("serial#", serial);
+ env_set("serial#", serial);
#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
env_save();
printf("Can't retrieve hardware revision\n");
snprintf(hardware_id, sizeof(hardware_id), "%02X", v.hardware_id);
- setenv("hardware_id", hardware_id);
+ env_set("hardware_id", hardware_id);
#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
env_save();
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
switch (get_board_revision()) {
case 0:
- setenv("board_name", "igep0034-lite");
+ env_set("board_name", "igep0034-lite");
break;
case 1:
- setenv("board_name", "igep0034");
+ env_set("board_name", "igep0034");
break;
default:
- setenv("board_name", "igep0033");
+ env_set("board_name", "igep0033");
break;
}
#endif
{
switch (gd->bd->bi_arch_number) {
case MACH_TYPE_IGEP0020:
- setenv("fdtfile", "omap3-igep0020.dtb");
+ env_set("fdtfile", "omap3-igep0020.dtb");
break;
case MACH_TYPE_IGEP0030:
- setenv("fdtfile", "omap3-igep0030.dtb");
+ env_set("fdtfile", "omap3-igep0030.dtb");
break;
}
}
pnvramaddr = gd->ram_size - CONFIG_KM_RESERVED_PRAM - CONFIG_KM_PHRAM
- CONFIG_KM_PNVRAM;
sprintf((char *)buf, "0x%x", pnvramaddr);
- setenv("pnvramaddr", (char *)buf);
+ env_set("pnvramaddr", (char *)buf);
/* try to read rootfssize (ram image) from environment */
p = getenv("rootfssize");
pram = (rootfssize + CONFIG_KM_RESERVED_PRAM + CONFIG_KM_PHRAM +
CONFIG_KM_PNVRAM) / 0x400;
sprintf((char *)buf, "0x%x", pram);
- setenv("pram", (char *)buf);
+ env_set("pram", (char *)buf);
varaddr = gd->ram_size - CONFIG_KM_RESERVED_PRAM - CONFIG_KM_PHRAM;
sprintf((char *)buf, "0x%x", varaddr);
- setenv("varaddr", (char *)buf);
+ env_set("varaddr", (char *)buf);
kernelmem = gd->ram_size - 0x400 * pram;
sprintf((char *)buf, "0x%x", kernelmem);
- setenv("kernelmem", (char *)buf);
+ env_set("kernelmem", (char *)buf);
return 0;
}
return 1;
}
strcpy((char *)buf, p);
- setenv("boardid", (char *)buf);
+ env_set("boardid", (char *)buf);
printf("set boardid=%s\n", buf);
p = get_local_var("IVM_HWKey");
return 1;
}
strcpy((char *)buf, p);
- setenv("hwkey", (char *)buf);
+ env_set("hwkey", (char *)buf);
printf("set hwkey=%s\n", buf);
printf("Execute manually saveenv for persistent storage.\n");
envbid = bid;
envhwkey = hwkey;
sprintf(buf, "%lx", bid);
- setenv("boardid", buf);
+ env_set("boardid", buf);
sprintf(buf, "%lx", hwkey);
- setenv("hwkey", buf);
+ env_set("hwkey", buf);
}
} /* end while( ! found ) */
}
#ifndef CONFIG_KMTEGR1
/* if an offset is defined, add it */
process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET, true);
- setenv((char *)"ethaddr", (char *)valbuf);
+ env_set((char *)"ethaddr", (char *)valbuf);
#ifdef CONFIG_KMVECT1
/* KMVECT1 has two ethernet interfaces */
process_mac(valbuf, page2, 1, true);
- setenv((char *)"eth1addr", (char *)valbuf);
+ env_set((char *)"eth1addr", (char *)valbuf);
#endif
#else
/* KMTEGR1 has a special setup. eth0 has no connection to the outside and
* gets the official MAC address from the IVM
*/
process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET, false);
- setenv((char *)"ethaddr", (char *)valbuf);
+ env_set((char *)"ethaddr", (char *)valbuf);
process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET, true);
- setenv((char *)"eth1addr", (char *)valbuf);
+ env_set((char *)"eth1addr", (char *)valbuf);
#endif
return 0;
mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
if (piggy_present()) {
- setenv("ethact", "UEC2");
- setenv("netdev", "eth1");
+ env_set("ethact", "UEC2");
+ env_set("netdev", "eth1");
puts("using PIGGY for network boot\n");
} else {
- setenv("netdev", "eth0");
+ env_set("netdev", "eth0");
puts("using frontport for network boot\n");
}
#endif
if (dip_switch != 0) {
/* start bootloader */
puts("DIP: Enabled\n");
- setenv("actual_bank", "0");
+ env_set("actual_bank", "0");
}
#endif
set_km_env();
unsigned int bootcountaddr;
bootcountaddr = gd->ram_size - BOOTCOUNT_ADDR;
sprintf((char *)buf, "0x%x", bootcountaddr);
- setenv("bootcountaddr", (char *)buf);
+ env_set("bootcountaddr", (char *)buf);
}
int misc_init_r(void)
if (dip_switch != 0) {
/* start bootloader */
puts("DIP: Enabled\n");
- setenv("actual_bank", "0");
+ env_set("actual_bank", "0");
}
#endif
if (dip_switch != 0) {
/* start bootloader */
puts("DIP: Enabled\n");
- setenv("actual_bank", "0");
+ env_set("actual_bank", "0");
}
#endif
set_km_env();
if (reboot_mode[0] > 0 && isascii(reboot_mode[0])) {
if (!getenv("reboot-mode"))
- setenv("reboot-mode", (char *)reboot_mode);
+ env_set("reboot-mode", (char *)reboot_mode);
}
omap_reboot_mode_clear();
int board_late_init(void)
{
- setenv("board_name", "mccmon6");
+ env_set("board_name", "mccmon6");
return 0;
}
int board_late_init(void)
{
- setenv("board_name", "imx6logic");
+ env_set("board_name", "imx6logic");
if (is_mx6dq()) {
- setenv("board_rev", "MX6DQ");
- setenv("fdt_file", "imx6q-logicpd.dtb");
+ env_set("board_rev", "MX6DQ");
+ env_set("fdt_file", "imx6q-logicpd.dtb");
}
return 0;
/* If the user has not set fdtimage, set the default */
if (!getenv("fdtimage"))
- setenv("fdtimage", board->fdtfile);
+ env_set("fdtimage", board->fdtfile);
}
/* restore hsusb0_data5 pin as hsusb0_data5 */
/* set env variable attkernaddr for relocated kernel */
sprintf(buf, "%#x", KERNEL_ADDRESS);
- setenv("attkernaddr", buf);
+ env_set("attkernaddr", buf);
/* initialize omap tags */
init_omap_tags();
expansion_config.revision,
expansion_config.fab_revision);
MUX_GUMSTIX();
- setenv("defaultdisplay", "dvi");
- setenv("expansionname", "summit");
+ env_set("defaultdisplay", "dvi");
+ env_set("expansionname", "summit");
break;
case GUMSTIX_TOBI:
printf("Recognized Tobi expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
MUX_GUMSTIX();
- setenv("defaultdisplay", "dvi");
- setenv("expansionname", "tobi");
+ env_set("defaultdisplay", "dvi");
+ env_set("expansionname", "tobi");
break;
case GUMSTIX_TOBI_DUO:
printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
MUX_GUMSTIX();
- setenv("expansionname", "tobiduo");
+ env_set("expansionname", "tobiduo");
break;
case GUMSTIX_PALO35:
printf("Recognized Palo35 expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
MUX_GUMSTIX();
- setenv("defaultdisplay", "lcd35");
- setenv("expansionname", "palo35");
+ env_set("defaultdisplay", "lcd35");
+ env_set("expansionname", "palo35");
break;
case GUMSTIX_PALO43:
printf("Recognized Palo43 expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
MUX_GUMSTIX();
- setenv("defaultdisplay", "lcd43");
- setenv("expansionname", "palo43");
+ env_set("defaultdisplay", "lcd43");
+ env_set("expansionname", "palo43");
break;
case GUMSTIX_CHESTNUT43:
printf("Recognized Chestnut43 expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
MUX_GUMSTIX();
- setenv("defaultdisplay", "lcd43");
- setenv("expansionname", "chestnut43");
+ env_set("defaultdisplay", "lcd43");
+ env_set("expansionname", "chestnut43");
break;
case GUMSTIX_PINTO:
printf("Recognized Pinto expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
MUX_GUMSTIX();
- setenv("defaultdisplay", "lcd43");
- setenv("expansionname", "gallop43");
+ env_set("defaultdisplay", "lcd43");
+ env_set("expansionname", "gallop43");
break;
case GUMSTIX_ALTO35:
printf("Recognized Alto35 expansion board (rev %d %s)\n",
expansion_config.fab_revision);
MUX_GUMSTIX();
MUX_ALTO35();
- setenv("defaultdisplay", "lcd35");
- setenv("expansionname", "alto35");
+ env_set("defaultdisplay", "lcd35");
+ env_set("expansionname", "alto35");
break;
case GUMSTIX_STAGECOACH:
printf("Recognized Stagecoach expansion board (rev %d %s)\n",
expansion_config.fab_revision);
MUX_GUMSTIX();
MUX_ARBOR43C();
- setenv("defaultdisplay", "lcd43");
- setenv("expansionname", "arbor43c");
+ env_set("defaultdisplay", "lcd43");
+ env_set("expansionname", "arbor43c");
break;
case ETTUS_USRP_E:
printf("Recognized Ettus Research USRP-E (rev %d %s)\n",
expansion_config.fab_revision);
MUX_GUMSTIX();
MUX_USRP_E();
- setenv("defaultdisplay", "dvi");
+ env_set("defaultdisplay", "dvi");
break;
case GUMSTIX_NO_EEPROM:
case GUMSTIX_EMPTY_EEPROM:
puts("No or empty EEPROM on expansion board\n");
MUX_GUMSTIX();
- setenv("expansionname", "tobi");
+ env_set("expansionname", "tobi");
break;
default:
printf("Unrecognized expansion board 0x%08x\n", expansion_id);
}
if (expansion_config.content == 1)
- setenv(expansion_config.env_var, expansion_config.env_setting);
+ env_set(expansion_config.env_var, expansion_config.env_setting);
omap_die_id_display();
if (get_cpu_family() == CPU_OMAP34XX)
- setenv("boardname", "overo");
+ env_set("boardname", "overo");
else
- setenv("boardname", "overo-storm");
+ env_set("boardname", "overo-storm");
return 0;
}
}
if (dm_gpio_get_value(&resin)) {
- setenv("bootdelay", "-1");
+ env_set("bootdelay", "-1");
printf("Power button pressed - dropping to console.\n");
}
return;
fdtfile = model->fdtfile;
- setenv("fdtfile", fdtfile);
+ env_set("fdtfile", fdtfile);
}
/*
eth_setenv_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
if (!getenv("ethaddr"))
- setenv("ethaddr", getenv("usbethaddr"));
+ env_set("ethaddr", getenv("usbethaddr"));
return;
}
char s[11];
snprintf(s, sizeof(s), "0x%X", revision);
- setenv("board_revision", s);
+ env_set("board_revision", s);
snprintf(s, sizeof(s), "%d", rev_scheme);
- setenv("board_rev_scheme", s);
+ env_set("board_rev_scheme", s);
/* Can't rename this to board_rev_type since it's an ABI for scripts */
snprintf(s, sizeof(s), "0x%X", rev_type);
- setenv("board_rev", s);
- setenv("board_name", model->name);
+ env_set("board_rev", s);
+ env_set("board_name", model->name);
}
#endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */
snprintf(serial_string, sizeof(serial_string), "%016" PRIx64,
msg->get_board_serial.body.resp.serial);
- setenv("serial#", serial_string);
+ env_set("serial#", serial_string);
}
int misc_init_r(void)
/* Set MAC address */
sprintf(env_mac, "%02X:%02X:%02X:%02X:%02X:%02X",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
- setenv("ethaddr", env_mac);
+ env_set("ethaddr", env_mac);
debug_led(0x0F);
for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) {
get_sh_eth_mac(i, mac_string, buf);
if (i == 0)
- setenv("ethaddr", mac_string);
+ env_set("ethaddr", mac_string);
else {
sprintf(env_string, "eth%daddr", i);
- setenv(env_string, mac_string);
+ env_set(env_string, mac_string);
}
set_mac_to_sh_giga_eth_register(i, mac_string);
}
for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) {
get_sh_eth_mac(i, mac_string, buf);
if (i == 0)
- setenv("ethaddr", mac_string);
+ env_set("ethaddr", mac_string);
else {
sprintf(env_string, "eth%daddr", i);
- setenv(env_string, mac_string);
+ env_set(env_string, mac_string);
}
set_mac_to_sh_giga_eth_register(i, mac_string);
}
for (i = 0; i < SH7757LCR_ETHERNET_NUM_CH; i++) {
get_sh_eth_mac(i, mac_string, buf);
if (i == 0)
- setenv("ethaddr", mac_string);
+ env_set("ethaddr", mac_string);
else {
sprintf(env_string, "eth%daddr", i);
- setenv(env_string, mac_string);
+ env_set(env_string, mac_string);
}
set_mac_to_sh_eth_register(i, mac_string);
for (i = 0; i < SH7757LCR_GIGA_ETHERNET_NUM_CH; i++) {
get_sh_eth_mac(i + SH7757LCR_ETHERNET_NUM_CH, mac_string, buf);
sprintf(env_string, "eth%daddr", i + SH7757LCR_ETHERNET_NUM_CH);
- setenv(env_string, mac_string);
+ env_set(env_string, mac_string);
set_mac_to_sh_giga_eth_register(i, mac_string);
}
{
if (fastboot_key_pressed()) {
printf("enter fastboot!\n");
- setenv("preboot", "setenv preboot; fastboot usb0");
+ env_set("preboot", "setenv preboot; fastboot usb0");
}
return 0;
alt_setting = get_dfu_alt_boot(interface, devstr);
if (alt_setting) {
- setenv("dfu_alt_boot", alt_setting);
+ env_set("dfu_alt_boot", alt_setting);
offset = snprintf(buf, buf_size, "%s", alt_setting);
}
status = "done\n";
}
- setenv("dfu_alt_info", alt_info);
+ env_set("dfu_alt_info", alt_info);
puts(status);
}
#endif
snprintf(info, ARRAY_SIZE(info), "%u.%u", (s5p_cpu_rev & 0xf0) >> 4,
s5p_cpu_rev & 0xf);
- setenv("soc_rev", info);
+ env_set("soc_rev", info);
snprintf(info, ARRAY_SIZE(info), "%x", s5p_cpu_id);
- setenv("soc_id", info);
+ env_set("soc_id", info);
#ifdef CONFIG_REVISION_TAG
snprintf(info, ARRAY_SIZE(info), "%x", get_board_rev());
- setenv("board_rev", info);
+ env_set("board_rev", info);
#endif
#ifdef CONFIG_OF_LIBFDT
const char *bdtype = "";
bdtype = "";
sprintf(info, "%s%s", bdname, bdtype);
- setenv("boardname", info);
+ env_set("boardname", info);
#endif
snprintf(info, ARRAY_SIZE(info), "%s%x-%s%s.dtb",
CONFIG_SYS_SOC, s5p_cpu_id, bdname, bdtype);
- setenv("fdtfile", info);
+ env_set("fdtfile", info);
#endif
}
#endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */
#endif
#ifdef CONFIG_S6E8AX0
s6e8ax0_init();
- setenv("lcdinfo", "lcd=s6e8ax0");
+ env_set("lcdinfo", "lcd=s6e8ax0");
#endif
}
#endif
vid->pclk_name = 1; /* MPLL */
vid->sclk_div = 1;
- setenv("lcdinfo", "lcd=ld9040");
+ env_set("lcdinfo", "lcd=ld9040");
}
#endif
return ret;
if (val >= VAL_UPPER)
- setenv("pin_state", "connected");
+ env_set("pin_state", "connected");
else if (val < VAL_UPPER && val > VAL_LOWER)
- setenv("pin_state", "open");
+ env_set("pin_state", "open");
else
- setenv("pin_state", "button");
+ env_set("pin_state", "button");
return ret;
}
/* Check EEPROM signature. */
if (!(data[0] == 0xa5 && data[1] == 0x5a)) {
puts("Invalid I2C EEPROM signature.\n");
- setenv("unit_serial", "invalid");
- setenv("unit_ident", "VINing-xxxx-STD");
- setenv("hostname", "vining-invalid");
+ env_set("unit_serial", "invalid");
+ env_set("unit_ident", "VINing-xxxx-STD");
+ env_set("hostname", "vining-invalid");
return 0;
}
(data[0x56] << 8) | (data[0x57] << 0);
memset(str, 0, sizeof(str));
sprintf(str, "%07i", serial);
- setenv("unit_serial", str);
+ env_set("unit_serial", str);
}
if (!getenv("unit_ident")) {
memset(str, 0, sizeof(str));
memcpy(str, &data[0x2e], 18);
- setenv("unit_ident", str);
+ env_set("unit_ident", str);
}
/* Set ethernet address from EEPROM. */
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-static int factoryset_mac_setenv(void)
+static int factoryset_mac_env_set(void)
{
uint8_t mac_addr[6];
return 0;
}
-int factoryset_setenv(void)
+int factoryset_env_set(void)
{
int ret = 0;
- if (factoryset_mac_setenv() < 0)
+ if (factoryset_mac_env_set() < 0)
ret = -1;
return ret;
};
int factoryset_read_eeprom(int i2c_addr);
-int factoryset_setenv(void);
+int factoryset_env_set(void);
extern struct factorysetcontainer factory_dat;
#endif /* __FACTORYSET_H */
#ifdef CONFIG_FACTORYSET
/* Set ASN in environment*/
if (factory_dat.asn[0] != 0) {
- setenv("dtb_name", (char *)factory_dat.asn);
+ env_set("dtb_name", (char *)factory_dat.asn);
} else {
/* dtb suffix gets added in load script */
- setenv("dtb_name", "am335x-draco");
+ env_set("dtb_name", "am335x-draco");
}
#else
- setenv("dtb_name", "am335x-draco");
+ env_set("dtb_name", "am335x-draco");
#endif
return 0;
int n = 0;
int rv;
- factoryset_setenv();
+ factoryset_env_set();
/* Set rgmii mode and enable rmii clock to be sourced from chip */
writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel);
factory_dat.pxm50 = 0;
sprintf(tmp, "%s_%s", factory_dat.asn,
factory_dat.comp_version);
- ret = setenv("boardid", tmp);
+ ret = env_set("boardid", tmp);
if (ret)
printf("error setting board id\n");
} else {
factory_dat.pxm50 = 1;
- ret = setenv("boardid", "PXM50_1.0");
+ ret = env_set("boardid", "PXM50_1.0");
if (ret)
printf("error setting board id\n");
}
int rv;
#ifndef CONFIG_SPL_BUILD
- factoryset_setenv();
+ factoryset_env_set();
#endif
/* Set rgmii mode and enable rmii clock to be sourced from chip */
else
strcpy(tmp, "QMX7.E38_4.0");
- ret = setenv("boardid", tmp);
+ ret = env_set("boardid", tmp);
if (ret)
printf("error setting board id\n");
partitionset_active = getenv("partitionset_active");
if (partitionset_active) {
if (partitionset_active[0] == 'A')
- setenv("partitionset_active", "B");
+ env_set("partitionset_active", "B");
else
- setenv("partitionset_active", "A");
+ env_set("partitionset_active", "A");
} else {
printf("partitionset_active missing.\n");
return -ENOENT;
rootfs = getenv("rootfs");
rootfs_fallback = getenv("rootfs_fallback");
- setenv("rootfs", rootfs_fallback);
- setenv("rootfs_fallback", rootfs);
+ env_set("rootfs", rootfs_fallback);
+ env_set("rootfs_fallback", rootfs);
kern_size = getenv("kernel_size");
kern_size_fb = getenv("kernel_size_fallback");
- setenv("kernel_size", kern_size_fb);
- setenv("kernel_size_fallback", kern_size);
+ env_set("kernel_size", kern_size_fb);
+ env_set("kernel_size_fallback", kern_size);
kern_off = getenv("kernel_Off");
kern_off_fb = getenv("kernel_Off_fallback");
- setenv("kernel_Off", kern_off_fb);
- setenv("kernel_Off_fallback", kern_off);
+ env_set("kernel_Off", kern_off_fb);
+ env_set("kernel_Off_fallback", kern_off);
- setenv("bootargs", '\0');
- setenv("upgrade_available", '\0');
- setenv("boot_retries", '\0');
+ env_set("bootargs", '\0');
+ env_set("upgrade_available", '\0');
+ env_set("boot_retries", '\0');
env_save();
return 0;
boot_retry = simple_strtoul(getenv("boot_retries"), NULL, 10);
boot_retry++;
sprintf(boot_buf, "%lx", boot_retry);
- setenv("boot_retries", boot_buf);
+ env_set("boot_retries", boot_buf);
env_save();
/*
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if (is_hummingboard())
- setenv("board_name", "HUMMINGBOARD");
+ env_set("board_name", "HUMMINGBOARD");
else
- setenv("board_name", "CUBOXI");
+ env_set("board_name", "CUBOXI");
if (is_mx6dq())
- setenv("board_rev", "MX6Q");
+ env_set("board_rev", "MX6Q");
else
- setenv("board_rev", "MX6DL");
+ env_set("board_rev", "MX6DL");
#endif
return 0;
if (!eth_getenv_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
eth_setenv_enetaddr("ethaddr", mac_id);
#endif
- setenv("verify", "n");
+ env_set("verify", "n");
#if defined(CONFIG_SPEAR_USBTTY)
- setenv("stdin", "usbtty");
- setenv("stdout", "usbtty");
- setenv("stderr", "usbtty");
+ env_set("stdin", "usbtty");
+ env_set("stdout", "usbtty");
+ env_set("stderr", "usbtty");
#ifndef CONFIG_SYS_NO_DCACHE
dcache_enable();
u_id_high = readl(&STM32_U_ID->u_id_high);
sprintf(serialno, "%08x%08x%08x",
u_id_high, u_id_mid, u_id_low);
- setenv("serial#", serialno);
+ env_set("serial#", serialno);
}
return 0;
snprintf(serial_string, sizeof(serial_string),
"%08x%08x", sid[0], sid[3]);
- setenv("serial#", serial_string);
+ env_set("serial#", serial_string);
}
}
}
{
__maybe_unused int ret;
- setenv("fel_booted", NULL);
- setenv("fel_scriptaddr", NULL);
+ env_set("fel_booted", NULL);
+ env_set("fel_scriptaddr", NULL);
/* determine if we are running in FEL mode */
if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */
- setenv("fel_booted", "1");
+ env_set("fel_booted", "1");
parse_spl_header(SPL_ADDR);
}
gpio_set_value(IMX_GPIO_NR(1, 29), 0);
gpio_set_value(IMX_GPIO_NR(4, 21), 0);
- setenv("preboot", "run gs_slow_boot");
+ env_set("preboot", "run gs_slow_boot");
} else
- setenv("preboot", "run gs_fast_boot");
+ env_set("preboot", "run gs_fast_boot");
}
}
serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32;
snprintf(serialno_str, sizeof(serialno_str), "%llx", serialno);
- setenv("cpuid#", cpuid_str);
- setenv("serial#", serialno_str);
+ env_set("cpuid#", cpuid_str);
+ env_set("serial#", serialno_str);
#endif
return;
* on HS devices.
*/
if (get_device_type() == HS_DEVICE)
- setenv("boot_fit", "1");
+ env_set("boot_fit", "1");
#endif
#if !defined(CONFIG_SPL_BUILD)
* on HS devices.
*/
if (get_device_type() == HS_DEVICE)
- setenv("boot_fit", "1");
+ env_set("boot_fit", "1");
#endif
return 0;
}
/* we will let default be "no lcd" */
}
out:
- setenv("idk_lcd", idk_lcd);
+ env_set("idk_lcd", idk_lcd);
return;
}
* on HS devices.
*/
if (get_device_type() == HS_DEVICE)
- setenv("boot_fit", "1");
+ env_set("boot_fit", "1");
/*
* Set the GPIO7 Pad to POWERHOLD. This has higher priority
switch (get_board_revision()) {
case REVISION_AXBX:
printf("Beagle Rev Ax/Bx\n");
- setenv("beaglerev", "AxBx");
+ env_set("beaglerev", "AxBx");
break;
case REVISION_CX:
printf("Beagle Rev C1/C2/C3\n");
- setenv("beaglerev", "Cx");
+ env_set("beaglerev", "Cx");
MUX_BEAGLE_C();
break;
case REVISION_C4:
printf("Beagle Rev C4\n");
- setenv("beaglerev", "C4");
+ env_set("beaglerev", "C4");
MUX_BEAGLE_C();
/* Set VAUX2 to 1.8V for EHCI PHY */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
break;
case REVISION_XM_AB:
printf("Beagle xM Rev A/B\n");
- setenv("beaglerev", "xMAB");
+ env_set("beaglerev", "xMAB");
MUX_BEAGLE_XM();
/* Set VAUX2 to 1.8V for EHCI PHY */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
break;
case REVISION_XM_C:
printf("Beagle xM Rev C\n");
- setenv("beaglerev", "xMC");
+ env_set("beaglerev", "xMC");
MUX_BEAGLE_XM();
/* Set VAUX2 to 1.8V for EHCI PHY */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
expansion_config.revision,
expansion_config.fab_revision);
MUX_TINCANTOOLS_ZIPPY();
- setenv("buddy", "zippy");
+ env_set("buddy", "zippy");
break;
case TINCANTOOLS_ZIPPY2:
printf("Recognized Tincantools Zippy2 board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
MUX_TINCANTOOLS_ZIPPY();
- setenv("buddy", "zippy2");
+ env_set("buddy", "zippy2");
break;
case TINCANTOOLS_TRAINER:
printf("Recognized Tincantools Trainer board (rev %d %s)\n",
expansion_config.fab_revision);
MUX_TINCANTOOLS_ZIPPY();
MUX_TINCANTOOLS_TRAINER();
- setenv("buddy", "trainer");
+ env_set("buddy", "trainer");
break;
case TINCANTOOLS_SHOWDOG:
printf("Recognized Tincantools Showdow board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
/* Place holder for DSS2 definition for showdog lcd */
- setenv("defaultdisplay", "showdoglcd");
- setenv("buddy", "showdog");
+ env_set("defaultdisplay", "showdoglcd");
+ env_set("buddy", "showdog");
break;
case KBADC_BEAGLEFPGA:
printf("Recognized KBADC Beagle FPGA board\n");
MUX_KBADC_BEAGLEFPGA();
- setenv("buddy", "beaglefpga");
+ env_set("buddy", "beaglefpga");
break;
case LW_BEAGLETOUCH:
printf("Recognized Liquidware BeagleTouch board\n");
- setenv("buddy", "beagletouch");
+ env_set("buddy", "beagletouch");
break;
case BRAINMUX_LCDOG:
printf("Recognized Brainmux LCDog board\n");
- setenv("buddy", "lcdog");
+ env_set("buddy", "lcdog");
break;
case BRAINMUX_LCDOGTOUCH:
printf("Recognized Brainmux LCDog Touch board\n");
- setenv("buddy", "lcdogtouch");
+ env_set("buddy", "lcdogtouch");
break;
case BBTOYS_WIFI:
printf("Recognized BeagleBoardToys WiFi board\n");
MUX_BBTOYS_WIFI()
- setenv("buddy", "bbtoys-wifi");
+ env_set("buddy", "bbtoys-wifi");
break;
case BBTOYS_VGA:
printf("Recognized BeagleBoardToys VGA board\n");
case LSR_COM6L_ADPT:
printf("Recognized LSR COM6L Adapter Board\n");
MUX_BBTOYS_WIFI()
- setenv("buddy", "lsr-com6l-adpt");
+ env_set("buddy", "lsr-com6l-adpt");
break;
case BEAGLE_NO_EEPROM:
printf("No EEPROM on expansion board\n");
- setenv("buddy", "none");
+ env_set("buddy", "none");
break;
default:
printf("Unrecognized expansion board: %x\n",
expansion_config.device_vendor);
- setenv("buddy", "unknown");
+ env_set("buddy", "unknown");
}
if (expansion_config.content == 1)
- setenv(expansion_config.env_var, expansion_config.env_setting);
+ env_set(expansion_config.env_var, expansion_config.env_setting);
twl4030_power_init();
switch (get_board_revision()) {
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (name)
- setenv("board_name", name);
+ env_set("board_name", name);
else if (ep->name)
- setenv("board_name", ep->name);
+ env_set("board_name", ep->name);
else
- setenv("board_name", unknown);
+ env_set("board_name", unknown);
if (ep->version)
- setenv("board_rev", ep->version);
+ env_set("board_rev", ep->version);
else
- setenv("board_rev", unknown);
+ env_set("board_rev", unknown);
if (ep->serial)
- setenv("board_serial", ep->serial);
+ env_set("board_serial", ep->serial);
else
- setenv("board_serial", unknown);
+ env_set("board_serial", unknown);
}
static u64 mac_to_u64(u8 mac[6])
* on HS devices.
*/
if (get_device_type() == HS_DEVICE)
- setenv("boot_fit", "1");
+ env_set("boot_fit", "1");
omap_die_id_serial();
omap_set_fastboot_vars();
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if (board_is_k2g_gp())
- setenv("board_name", "66AK2GGP\0");
+ env_set("board_name", "66AK2GGP\0");
else if (board_is_k2g_ice())
- setenv("board_name", "66AK2GIC\0");
+ env_set("board_name", "66AK2GIC\0");
#endif
return 0;
}
board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- setenv("board_name", "panda-es");
+ env_set("board_name", "panda-es");
#endif
board_id = ((board_id4 << 4) | (board_id3 << 3) |
(board_id2 << 2) | (board_id1 << 1) | (board_id0));
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
- setenv("board_name", "panda-a4");
+ env_set("board_name", "panda-a4");
#endif
}
rev = get_board_rev();
snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev);
- setenv("board_rev", env_str);
+ env_set("board_rev", env_str);
#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
if ((rev & 0xfff0) == 0x0100) {
/* if using the default device tree, use version for V1.0 HW */
fdt_env = getenv("fdt_file");
if ((fdt_env != NULL) && (strcmp(FDT_FILE, fdt_env) == 0)) {
- setenv("fdt_file", FDT_FILE_V1_0);
+ env_set("fdt_file", FDT_FILE_V1_0);
printf("patching fdt_file to " FDT_FILE_V1_0 "\n");
#ifndef CONFIG_ENV_IS_NOWHERE
env_save();
rev = get_board_rev();
snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev);
- setenv("board_rev", env_str);
+ env_set("board_rev", env_str);
#endif
return 0;
if (((src->sbmr2 & SRC_SBMR2_BMOD_MASK) >> SRC_SBMR2_BMOD_SHIFT)
== SRC_SBMR2_BMOD_SERIAL) {
printf("Serial Downloader recovery mode, disable autoboot\n");
- setenv("bootdelay", "-1");
+ env_set("bootdelay", "-1");
}
return 0;
tdx_hw_tag.ver_minor,
(char)tdx_hw_tag.ver_assembly + 'A');
- setenv("serial#", tdx_serial_str);
+ env_set("serial#", tdx_serial_str);
/*
* Check if environment contains a valid MAC address,
int board_late_init(void)
{
- setenv("board_name", tqma6_get_boardname());
+ env_set("board_name", tqma6_get_boardname());
tqma6_bb_board_late_init();
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- setenv("board_name", board_string());
+ env_set("board_name", board_string());
#endif
return 0;
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if (is_cpu_type(MXC_CPU_MX6Q))
- setenv("board_rev", "MX6Q");
+ env_set("board_rev", "MX6Q");
else
- setenv("board_rev", "MX6DL");
+ env_set("board_rev", "MX6DL");
#endif
return 0;
}
mac[5]);
printf("MAC: %s\n", ethaddr);
- setenv(envvar, ethaddr);
+ env_set(envvar, ethaddr);
}
return ret;
* (i.e. have not yet been set)
*/
if (!getenv(enetvar))
- setenv(enetvar, ethaddr);
+ env_set(enetvar, ethaddr);
}
}
printf("DIPs: 0x%1x\n", (~dips) & 0xf);
if ((dips & 0xf) == 0xe)
- setenv("console", "ttyUSB0,115200n8");
+ env_set("console", "ttyUSB0,115200n8");
return 0;
}
return -ENODEV;
}
- setenv("board_name", model);
+ env_set("board_name", model);
#endif
return 0;
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if (is_mx6dq())
- setenv("board_rev", "MX6Q");
+ env_set("board_rev", "MX6Q");
else
- setenv("board_rev", "MX6DL");
+ env_set("board_rev", "MX6DL");
if (is_revc1())
- setenv("board_name", "C1");
+ env_set("board_name", "C1");
else
- setenv("board_name", "B1");
+ env_set("board_name", "B1");
#endif
return 0;
}
{
switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
case ZYNQ_BM_QSPI:
- setenv("modeboot", "qspiboot");
+ env_set("modeboot", "qspiboot");
break;
case ZYNQ_BM_NAND:
- setenv("modeboot", "nandboot");
+ env_set("modeboot", "nandboot");
break;
case ZYNQ_BM_NOR:
- setenv("modeboot", "norboot");
+ env_set("modeboot", "norboot");
break;
case ZYNQ_BM_SD:
- setenv("modeboot", "sdboot");
+ env_set("modeboot", "sdboot");
break;
case ZYNQ_BM_JTAG:
- setenv("modeboot", "jtagboot");
+ env_set("modeboot", "jtagboot");
break;
default:
- setenv("modeboot", "");
+ env_set("modeboot", "");
break;
}
strlen(getenv("boot_targets")) + 2);
sprintf(new_targets, "%s %s", mode, getenv("boot_targets"));
- setenv("boot_targets", new_targets);
+ env_set("boot_targets", new_targets);
return 0;
}
/*
* Get a value from the fdt and format it to be set in the environment
*/
-static int fdt_value_setenv(const void *nodep, int len, const char *var)
+static int fdt_value_env_set(const void *nodep, int len, const char *var)
{
if (is_printable_string(nodep, len))
- setenv(var, (void *)nodep);
+ env_set(var, (void *)nodep);
else if (len == 4) {
char buf[11];
sprintf(buf, "0x%08X", fdt32_to_cpu(*(fdt32_t *)nodep));
- setenv(var, buf);
+ env_set(var, buf);
} else if (len%4 == 0 && len <= 20) {
/* Needed to print things like sha1 hashes. */
char buf[41];
for (i = 0; i < len; i += sizeof(unsigned int))
sprintf(buf + (i * 2), "%08x",
*(unsigned int *)(nodep + i));
- setenv(var, buf);
+ env_set(var, buf);
} else {
printf("error: unprintable value\n");
return 1;
if (curDepth == startDepth + 1)
curIndex++;
if (subcmd[0] == 'n' && curIndex == reqIndex) {
- const char *nodeName = fdt_get_name(
- working_fdt, nextNodeOffset, NULL);
+ const char *node_name;
- setenv(var, (char *)nodeName);
+ node_name = fdt_get_name(working_fdt,
+ nextNodeOffset,
+ NULL);
+ env_set(var, node_name);
return 0;
}
nextNodeOffset = fdt_next_node(
working_fdt, nodeoffset, prop, &len);
if (len == 0) {
/* no property value */
- setenv(var, "");
+ env_set(var, "");
return 0;
} else if (nodep && len > 0) {
if (subcmd[0] == 'v') {
int ret;
- ret = fdt_value_setenv(nodep, len, var);
+ ret = fdt_value_env_set(nodep, len,
+ var);
if (ret != 0)
return ret;
} else if (subcmd[0] == 'a') {
char buf[11];
sprintf(buf, "0x%p", nodep);
- setenv(var, buf);
+ env_set(var, buf);
} else if (subcmd[0] == 's') {
/* Get size */
char buf[11];
sprintf(buf, "0x%08X", len);
- setenv(var, buf);
+ env_set(var, buf);
} else
return CMD_RET_USAGE;
return 0;
#ifdef CONFIG_RANDOM_UUID
debug("%s unset. ", str);
gen_rand_uuid_str(uuid_str, UUID_STR_FORMAT_GUID);
- setenv(s, uuid_str);
+ env_set(s, uuid_str);
e = getenv(s);
if (e) {
return CMD_RET_FAILURE;
if (namestr)
- setenv(namestr, disk_guid);
+ env_set(namestr, disk_guid);
else
printf("%s\n", disk_guid);
for (i = 0; i < strlen(value); i++)
value[i] = tolower(value[i]);
#endif
- setenv(name, value);
+ env_set(name, value);
printf("ini: Imported %s as %s\n", name, value);
}
sprintf(str_ptr, "%02x", sum[i]);
str_ptr += 2;
}
- setenv(dest, str_output);
+ env_set(dest, str_output);
}
}
}
part = mtd_part_info(current_mtd_dev, current_mtd_partnum);
- setenv("mtddevname", part->name);
+ env_set("mtddevname", part->name);
debug("=> mtddevnum %d,\n=> mtddevname %s\n", mtddevnum, part->name);
} else {
- setenv("mtddevnum", NULL);
- setenv("mtddevname", NULL);
+ env_set("mtddevnum", NULL);
+ env_set("mtddevname", NULL);
debug("=> mtddevnum NULL\n=> mtddevname NULL\n");
}
sprintf(buf, "%s%d,%d", MTD_DEV_TYPE(current_mtd_dev->id->type),
current_mtd_dev->id->num, current_mtd_partnum);
- setenv("partition", buf);
+ env_set("partition", buf);
strncpy(last_partition, buf, 16);
debug("=> partition %s\n", buf);
} else {
- setenv("partition", NULL);
+ env_set("partition", NULL);
last_partition[0] = '\0';
debug("=> partition NULL\n");
ret = generate_mtdparts(buf, buflen);
if ((buf[0] != '\0') && (ret == 0))
- setenv("mtdparts", buf);
+ env_set("mtdparts", buf);
else
- setenv("mtdparts", NULL);
+ env_set("mtdparts", NULL);
return ret;
}
if (mtdids_default) {
debug("mtdids variable not defined, using default\n");
ids = mtdids_default;
- setenv("mtdids", (char *)ids);
+ env_set("mtdids", (char *)ids);
} else {
printf("mtdids not defined, no default present\n");
return 1;
if (!parts) {
if (mtdparts_default && use_defaults) {
parts = mtdparts_default;
- if (setenv("mtdparts", (char *)parts) == 0)
+ if (env_set("mtdparts", (char *)parts) == 0)
use_defaults = 0;
} else
printf("mtdparts variable not set, see 'help mtdparts'\n");
{
if (argc == 2) {
if (strcmp(argv[1], "default") == 0) {
- setenv("mtdids", NULL);
- setenv("mtdparts", NULL);
- setenv("partition", NULL);
+ env_set("mtdids", NULL);
+ env_set("mtdparts", NULL);
+ env_set("partition", NULL);
use_defaults = 1;
mtdparts_init();
/* this may be the first run, initialize lists if needed */
mtdparts_init();
- setenv("mtdparts", NULL);
+ env_set("mtdparts", NULL);
/* mtd_devices_init() calls current_save() */
return mtd_devices_init();
if (net_gateway.s_addr) {
ip_to_string(net_gateway, tmp);
- setenv("gatewayip", tmp);
+ env_set("gatewayip", tmp);
}
if (net_netmask.s_addr) {
ip_to_string(net_netmask, tmp);
- setenv("netmask", tmp);
+ env_set("netmask", tmp);
}
if (net_hostname[0])
- setenv("hostname", net_hostname);
+ env_set("hostname", net_hostname);
if (net_root_path[0])
- setenv("rootpath", net_root_path);
+ env_set("rootpath", net_root_path);
if (net_ip.s_addr) {
ip_to_string(net_ip, tmp);
- setenv("ipaddr", tmp);
+ env_set("ipaddr", tmp);
}
#if !defined(CONFIG_BOOTP_SERVERIP)
/*
*/
if (net_server_ip.s_addr) {
ip_to_string(net_server_ip, tmp);
- setenv("serverip", tmp);
+ env_set("serverip", tmp);
}
#endif
if (net_dns_server.s_addr) {
ip_to_string(net_dns_server, tmp);
- setenv("dnsip", tmp);
+ env_set("dnsip", tmp);
}
#if defined(CONFIG_BOOTP_DNS2)
if (net_dns_server2.s_addr) {
ip_to_string(net_dns_server2, tmp);
- setenv("dnsip2", tmp);
+ env_set("dnsip2", tmp);
}
#endif
if (net_nis_domain[0])
- setenv("domain", net_nis_domain);
+ env_set("domain", net_nis_domain);
#if defined(CONFIG_CMD_SNTP) && defined(CONFIG_BOOTP_TIMEOFFSET)
if (net_ntp_time_offset) {
sprintf(tmp, "%d", net_ntp_time_offset);
- setenv("timeoffset", tmp);
+ env_set("timeoffset", tmp);
}
#endif
#if defined(CONFIG_CMD_SNTP) && defined(CONFIG_BOOTP_NTPSERVER)
if (net_ntp_server.s_addr) {
ip_to_string(net_ntp_server, tmp);
- setenv("ntpserverip", tmp);
+ env_set("ntpserverip", tmp);
}
#endif
}
printf("CDP offered appliance VLAN %d\n",
ntohs(cdp_appliance_vlan));
vlan_to_string(cdp_appliance_vlan, tmp);
- setenv("vlan", tmp);
+ env_set("vlan", tmp);
net_our_vlan = cdp_appliance_vlan;
}
if (cdp_native_vlan != htons(-1)) {
printf("CDP offered native VLAN %d\n", ntohs(cdp_native_vlan));
vlan_to_string(cdp_native_vlan, tmp);
- setenv("nvlan", tmp);
+ env_set("nvlan", tmp);
net_native_vlan = cdp_native_vlan;
}
}
net_gateway.s_addr = 0;
ip_to_string(net_gateway, tmp);
- setenv("gatewayip", tmp);
+ env_set("gatewayip", tmp);
ip_to_string(net_netmask, tmp);
- setenv("netmask", tmp);
+ env_set("netmask", tmp);
ip_to_string(net_ip, tmp);
- setenv("ipaddr", tmp);
- setenv("llipaddr", tmp); /* store this for next time */
+ env_set("ipaddr", tmp);
+ env_set("llipaddr", tmp); /* store this for next time */
return CMD_RET_SUCCESS;
}
return 0;
}
-int setenv(const char *varname, const char *varvalue)
+int env_set(const char *varname, const char *varvalue)
{
const char * const argv[4] = { "setenv", varname, varvalue, NULL };
/* TODO: this should be unsigned */
char *str = simple_itoa(value);
- return setenv(varname, str);
+ return env_set(varname, str);
}
/**
char str[17];
sprintf(str, "%lx", value);
- return setenv(varname, str);
+ return env_set(varname, str);
}
ulong getenv_hex(const char *varname, ulong default_val)
return 1;
}
sprintf(buf, "%zX", (size_t)len);
- setenv("filesize", buf);
+ env_set("filesize", buf);
return 0;
}
return 1;
if (argc > 2)
- setenv(argv[2], info.uuid);
+ env_set(argv[2], info.uuid);
else
printf("%s\n", info.uuid);
sprintf(t, "%s%x", str[0] ? " " : "", p);
strcat(str, t);
}
- setenv(var, str);
+ env_set(var, str);
return 0;
}
snprintf(buf, sizeof(buf), LBAF, info.start);
if (argc > 3)
- setenv(argv[3], buf);
+ env_set(argv[3], buf);
else
printf("%s\n", buf);
snprintf(buf, sizeof(buf), LBAF, info.size);
if (argc > 3)
- setenv(argv[3], buf);
+ env_set(argv[3], buf);
else
printf("%s\n", buf);
char bootargs[CONFIG_SYS_CBSIZE];
cli_simple_process_macros(label->append, bootargs);
- setenv("bootargs", bootargs);
+ env_set("bootargs", bootargs);
}
debug("running: %s\n", localcmd);
strcat(bootargs, mac_str);
cli_simple_process_macros(bootargs, finalbootargs);
- setenv("bootargs", finalbootargs);
+ env_set("bootargs", finalbootargs);
printf("append: %s\n", finalbootargs);
}
filename = getenv("bootfile");
else {
filename = argv[5];
- setenv("bootfile", filename);
+ env_set("bootfile", filename);
}
if (strstr(argv[3], "ext2"))
* when invoking qemu), do not update bootargs
*/
if (*data_addr != '\0') {
- if (setenv("bootargs", data_addr) < 0)
+ if (env_set("bootargs", data_addr) < 0)
printf("warning: unable to change bootargs\n");
}
}
if (!global)
break;
}
- debug("## FINAL (now setenv()) : %s\n", data);
+ debug("## FINAL (now env_set()) : %s\n", data);
printf("%s=%s\n", name, data);
- return setenv(name, data);
+ return env_set(name, data);
}
#endif
pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
# endif
sprintf(memsz, "%ldk", (long int) ((gd->ram_size / 1024) - pram));
- setenv("mem", memsz);
+ env_set("mem", memsz);
return 0;
}
env_val = CONSOLE_ARG;
}
- setenv("bootargs", env_val);
+ env_set("bootargs", env_val);
debug("after silent fix-up: %s\n", env_val);
free(buf);
}
} else {
#ifndef __U_BOOT__
if(cur->flg_export)
- unsetenv(cur->name);
+ unenv_set(cur->name);
#endif
free(cur->name);
free(cur->value);
#ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
/* set the environment variables (will overwrite previous env settings) */
for (i = 0; i < 3; i++) {
- setenv(stdio_names[i], stdio_devices[i]->name);
+ env_set(stdio_names[i], stdio_devices[i]->name);
}
#endif /* CONFIG_SYS_CONSOLE_ENV_OVERWRITE */
/* Setting environment variables */
for (i = 0; i < 3; i++) {
- setenv(stdio_names[i], stdio_devices[i]->name);
+ env_set(stdio_names[i], stdio_devices[i]->name);
}
gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */
str_ptr += 2;
}
*str_ptr = '\0';
- setenv(dest, str_output);
+ env_set(dest, str_output);
} else {
ulong addr;
void *buf;
const char *ret;
size_t len;
- setenv("hwconfig", "key1:subkey1=value1,subkey2=value2;key2:value3;;;;"
+ env_set("hwconfig", "key1:subkey1=value1,subkey2=value2;key2:value3;;;;"
"key3;:,:=;key4", 1);
ret = hwconfig_arg("key1", &len);
assert(hwconfig_arg("key4", &len) == NULL);
assert(hwconfig_arg("bogus", &len) == NULL);
- unsetenv("hwconfig");
+ unenv_set("hwconfig");
assert(hwconfig(NULL) == 0);
assert(hwconfig("") == 0);
if (*hdr->cmdline)
strcat(newbootargs, hdr->cmdline);
- setenv("bootargs", newbootargs);
+ env_set("bootargs", newbootargs);
if (os_data) {
*os_data = (ulong)hdr;
bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop");
#ifdef CONFIG_VERSION_VARIABLE
- setenv("ver", version_string); /* set version variable */
+ env_set("ver", version_string); /* set version variable */
#endif /* CONFIG_VERSION_VARIABLE */
cli_init();
configuration. But some boards use this to support 'Falcon' boot
on EXT2 and FAT, where SPL boots directly into Linux without
starting U-Boot first. Enabling this option will make getenv()
- and setenv() available in SPL.
+ and env_set() available in SPL.
config SPL_SAVEENV
bool "Support save environment"
return -EINVAL;
}
- ret = setenv("dfu_alt_info", str_env);
+ ret = env_set("dfu_alt_info", str_env);
if (ret) {
error("unable to set env variable \"dfu_alt_info\"!\n");
return -EINVAL;
env_init();
env_relocate();
- setenv("autoload", "yes");
+ env_set("autoload", "yes");
rv = eth_initialize();
if (rv == 0) {
printf("No Ethernet devices found\n");
return -ENODEV;
}
if (bootdev->boot_device_name)
- setenv("ethact", bootdev->boot_device_name);
+ env_set("ethact", bootdev->boot_device_name);
rv = net_loop(BOOTP);
if (rv < 0) {
printf("Problem booting with BOOTP\n");
tftp_timeout_count_max = cnt_max;
/* we don't want to retry the connection if errors occur */
- setenv("netretry", "no");
+ env_set("netretry", "no");
/* download the update file */
load_addr = addr;
tftp_timeout_ms = saved_timeout_msecs;
tftp_timeout_count_max = saved_timeout_count;
- setenv("netretry", saved_netretry);
+ env_set("netretry", saved_netretry);
if (saved_netretry != NULL)
free(saved_netretry);
* int eth_setenv_enetaddr(char *name, const uchar *enetaddr);
Store the MAC address into the named environment variable. The return value is
-the same as the setenv() function.
+the same as the env_set() function.
uchar enetaddr[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 };
eth_setenv_enetaddr("ethaddr", enetaddr);
/* the "ethaddr" env var should now be set to "00:11:22:33:44:55" */
return found[0];
}
-void AT91F_DataflashSetEnv (void)
+void AT91F_Dataflashenv_set(void)
{
int i, j;
int part;
/* Set the environment according to the label...*/
if((env & FLAG_SETENV) == FLAG_SETENV) {
start = dataflash_info[i].Device.area_list[j].start;
- sprintf((char*) s,"%lX",start);
- setenv((char*) area_list[part].label,(char*) s);
+ sprintf((char *)s, "%lX", start);
+ env_set((char *)area_list[part].label,
+ (char *)s);
}
part++;
}
if (strcmp(interface, "lo") == 0) {
priv->local = 1;
- setenv("ipaddr", "127.0.0.1");
- setenv("serverip", "127.0.0.1");
+ env_set("ipaddr", "127.0.0.1");
+ env_set("serverip", "127.0.0.1");
}
return sandbox_eth_raw_os_start(interface, pdata->enetaddr, priv);
}
return CMD_RET_FAILURE;
if (argc == 4)
- setenv(argv[3], uuid);
+ env_set(argv[3], uuid);
else
printf("%s\n", uuid);
info = fs_get_info(fs_type);
if (argc == 4)
- setenv(argv[3], info->name);
+ env_set(argv[3], info->name);
else
printf("%s\n", info->name);
EXPORT_FUNC(do_reset, int, do_reset, cmd_tbl_t *,
int , int , char * const [])
EXPORT_FUNC(getenv, char *, getenv, const char*)
- EXPORT_FUNC(setenv, int, setenv, const char *, const char *)
+ EXPORT_FUNC(env_set, int, env_set, const char *, const char *)
EXPORT_FUNC(simple_strtoul, unsigned long, simple_strtoul,
const char *, char **, unsigned int)
EXPORT_FUNC(strict_strtoul, int, strict_strtoul,
* Return -1 if variable does not exist (default to true)
*/
int getenv_yesno(const char *var);
-int setenv (const char *, const char *);
+
+/**
+ * env_set() - set an environment variable
+ *
+ * This sets or deletes the value of an environment variable. For setting the
+ * value the variable is created if it does not already exist.
+ *
+ * @varname: Variable to adjust
+ * @value: Value to set for the variable, or NULL or "" to delete the variable
+ * @return 0 if OK, 1 on error
+ */
+int env_set(const char *varname, const char *value);
+
int setenv_ulong(const char *varname, ulong value);
int setenv_hex(const char *varname, ulong value);
/**
else \
strcpy(ethname, "ethaddr"); \
printf("Setting %s from EEPROM with %s\n", ethname, buf);\
- setenv(ethname, buf); \
+ env_set(ethname, buf); \
} \
} while (0)
extern void dataflash_print_info (void);
extern void dataflash_perror (int err);
-extern void AT91F_DataflashSetEnv (void);
+extern void AT91F_Dataflashenv_set(void);
extern struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS];
extern dataflash_protect_t area_list[NB_DATAFLASH_AREA];
unsigned long simple_strtoul(const char *cp, char **endp, unsigned int base);
int strict_strtoul(const char *cp, unsigned int base, unsigned long *res);
char *getenv (const char *name);
-int setenv (const char *varname, const char *varvalue);
+int env_set(const char *varname, const char *value);
long simple_strtol(const char *cp, char **endp, unsigned int base);
int strcmp(const char *cs, const char *ct);
unsigned long ustrtoul(const char *cp, char **endp, unsigned int base);
#define H_MATCH_SUBSTR (1 << 7) /* search for substring matches */
#define H_MATCH_REGEX (1 << 8) /* search for regular expression matches */
#define H_MATCH_METHOD (H_MATCH_IDENT | H_MATCH_SUBSTR | H_MATCH_REGEX)
-#define H_PROGRAMMATIC (1 << 9) /* indicate that an import is from setenv() */
+#define H_PROGRAMMATIC (1 << 9) /* indicate that an import is from env_set() */
#define H_ORIGIN_FLAGS (H_INTERACTIVE | H_PROGRAMMATIC)
#endif /* _SEARCH_H_ */
if (argc == 1)
printf("%s\n", uuid);
else
- setenv(argv[1], uuid);
+ env_set(argv[1], uuid);
return CMD_RET_SUCCESS;
}
if (net_server_ip.s_addr == net_arp_wait_packet_ip.s_addr) {
char buf[20];
sprintf(buf, "%pM", &arp->ar_sha);
- setenv("serveraddr", buf);
+ env_set("serveraddr", buf);
}
#endif
* not contain a new value
*/
if (*net_boot_file_name)
- setenv("bootfile", net_boot_file_name);
+ env_set("bootfile", net_boot_file_name);
#endif
net_copy_ip(&net_ip, &bp->bp_yiaddr);
}
ip_to_string(ip_addr, ip_str);
printf("%s\n", ip_str);
if (net_dns_env_var)
- setenv(net_dns_env_var, ip_str);
+ env_set(net_dns_env_var, ip_str);
} else {
puts("server responded with invalid IP number\n");
}
sprintf(buf, "%pM", enetaddr);
- return setenv(name, buf);
+ return env_set(name, buf);
}
int eth_getenv_enetaddr_by_index(const char *base_name, int index,
/* update current ethernet name */
if (eth_get_dev()) {
if (act == NULL || strcmp(act, eth_get_name()) != 0)
- setenv("ethact", eth_get_name());
+ env_set("ethact", eth_get_name());
}
/*
* remove the variable completely if there is no active
* interface
*/
else if (act != NULL)
- setenv("ethact", NULL);
+ env_set("ethact", NULL);
}
void eth_try_another(int first_restart)
{
net_ping_ip = string_to_ip("1.1.2.2");
- setenv("ethact", "eth@10002000");
+ env_set("ethact", "eth@10002000");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10002000", getenv("ethact"));
- setenv("ethact", "eth@10003000");
+ env_set("ethact", "eth@10003000");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10003000", getenv("ethact"));
- setenv("ethact", "eth@10004000");
+ env_set("ethact", "eth@10004000");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10004000", getenv("ethact"));
static int dm_test_eth_alias(struct unit_test_state *uts)
{
net_ping_ip = string_to_ip("1.1.2.2");
- setenv("ethact", "eth0");
+ env_set("ethact", "eth0");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10002000", getenv("ethact"));
- setenv("ethact", "eth1");
+ env_set("ethact", "eth1");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10004000", getenv("ethact"));
/* Expected to fail since eth2 is not defined in the device tree */
- setenv("ethact", "eth2");
+ env_set("ethact", "eth2");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10002000", getenv("ethact"));
- setenv("ethact", "eth5");
+ env_set("ethact", "eth5");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10003000", getenv("ethact"));
net_ping_ip = string_to_ip("1.1.2.2");
/* Expected to be "eth@10003000" because of ethprime variable */
- setenv("ethact", NULL);
- setenv("ethprime", "eth5");
+ env_set("ethact", NULL);
+ env_set("ethprime", "eth5");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10003000", getenv("ethact"));
/* Expected to be "eth@10002000" because it is first */
- setenv("ethact", NULL);
- setenv("ethprime", NULL);
+ env_set("ethact", NULL);
+ env_set("ethprime", NULL);
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10002000", getenv("ethact"));
/* Invalidate MAC address */
strcpy(ethaddr[i], getenv(addrname[i]));
/* Must disable access protection for ethaddr before clearing */
- setenv(".flags", addrname[i]);
- setenv(addrname[i], NULL);
+ env_set(".flags", addrname[i]);
+ env_set(addrname[i], NULL);
}
/* Set ethact to "eth@10002000" */
- setenv("ethact", ethname[0]);
+ env_set("ethact", ethname[0]);
/* Segment fault might happen if something is wrong */
ut_asserteq(-ENODEV, net_loop(PING));
for (i = 0; i < DM_TEST_ETH_NUM; i++) {
/* Restore the env */
- setenv(".flags", addrname[i]);
- setenv(addrname[i], ethaddr[i]);
+ env_set(".flags", addrname[i]);
+ env_set(addrname[i], ethaddr[i]);
/* Probe the device again */
ut_assertok(device_probe(dev[i]));
}
- setenv(".flags", NULL);
- setenv("ethact", NULL);
+ env_set(".flags", NULL);
+ env_set("ethact", NULL);
return 0;
}
static int _dm_test_eth_rotate1(struct unit_test_state *uts)
{
/* Make sure that the default is to rotate to the next interface */
- setenv("ethact", "eth@10004000");
+ env_set("ethact", "eth@10004000");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10002000", getenv("ethact"));
/* If ethrotate is no, then we should fail on a bad MAC */
- setenv("ethact", "eth@10004000");
- setenv("ethrotate", "no");
+ env_set("ethact", "eth@10004000");
+ env_set("ethrotate", "no");
ut_asserteq(-EINVAL, net_loop(PING));
ut_asserteq_str("eth@10004000", getenv("ethact"));
static int _dm_test_eth_rotate2(struct unit_test_state *uts)
{
/* Make sure we can skip invalid devices */
- setenv("ethact", "eth@10004000");
+ env_set("ethact", "eth@10004000");
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10004000", getenv("ethact"));
/* Make sure we can handle device name which is not eth# */
- setenv("ethact", "sbe5");
+ env_set("ethact", "sbe5");
ut_assertok(net_loop(PING));
ut_asserteq_str("sbe5", getenv("ethact"));
/* Invalidate eth1's MAC address */
strcpy(ethaddr, getenv("eth1addr"));
/* Must disable access protection for eth1addr before clearing */
- setenv(".flags", "eth1addr");
- setenv("eth1addr", NULL);
+ env_set(".flags", "eth1addr");
+ env_set("eth1addr", NULL);
retval = _dm_test_eth_rotate1(uts);
/* Restore the env */
- setenv("eth1addr", ethaddr);
- setenv("ethrotate", NULL);
+ env_set("eth1addr", ethaddr);
+ env_set("ethrotate", NULL);
if (!retval) {
/* Invalidate eth0's MAC address */
strcpy(ethaddr, getenv("ethaddr"));
/* Must disable access protection for ethaddr before clearing */
- setenv(".flags", "ethaddr");
- setenv("ethaddr", NULL);
+ env_set(".flags", "ethaddr");
+ env_set("ethaddr", NULL);
retval = _dm_test_eth_rotate2(uts);
/* Restore the env */
- setenv("ethaddr", ethaddr);
+ env_set("ethaddr", ethaddr);
}
/* Restore the env */
- setenv(".flags", NULL);
+ env_set(".flags", NULL);
return retval;
}
* the active device should be eth0
*/
sandbox_eth_disable_response(1, true);
- setenv("ethact", "eth@10004000");
- setenv("netretry", "yes");
+ env_set("ethact", "eth@10004000");
+ env_set("netretry", "yes");
sandbox_eth_skip_timeout();
ut_assertok(net_loop(PING));
ut_asserteq_str("eth@10002000", getenv("ethact"));
* eth1 is disabled and netretry is no, so the ping should fail and the
* active device should be eth1
*/
- setenv("ethact", "eth@10004000");
- setenv("netretry", "no");
+ env_set("ethact", "eth@10004000");
+ env_set("netretry", "no");
sandbox_eth_skip_timeout();
ut_asserteq(-ETIMEDOUT, net_loop(PING));
ut_asserteq_str("eth@10004000", getenv("ethact"));
retval = _dm_test_net_retry(uts);
/* Restore the env */
- setenv("netretry", NULL);
+ env_set("netretry", NULL);
sandbox_eth_disable_response(1, false);
return retval;
* modified or deleted
*
*/
-int fw_setenv(int argc, char *argv[], struct env_opts *opts)
+int fw_env_set(int argc, char *argv[], struct env_opts *opts)
{
int i;
size_t len;
int fw_printenv(int argc, char *argv[], int value_only, struct env_opts *opts);
/**
- * fw_setenv() - adds or removes one variable to the environment
+ * fw_env_set() - adds or removes one variable to the environment
*
* @argc: number of strings in argv, argv[0] is variable name,
* argc==1 means erase variable, argc > 1 means add a variable
* ERRORS:
* EROFS - some variables ("ethaddr", "serial#") cannot be modified
*/
-int fw_setenv(int argc, char *argv[], struct env_opts *opts);
+int fw_env_set(int argc, char *argv[], struct env_opts *opts);
/**
* fw_parse_script() - adds or removes multiple variables with a batch script
"\n");
}
-void usage_setenv(void)
+void usage_env_set(void)
{
fprintf(stderr,
"Usage: fw_setenv [OPTIONS]... [VARIABLE]...\n"
env_opts.lockname = optarg;
break;
case 'h':
- do_printenv ? usage_printenv() : usage_setenv();
+ do_printenv ? usage_printenv() : usage_env_set();
exit(EXIT_SUCCESS);
break;
default:
/* ignore common options */
break;
default: /* '?' */
- usage_setenv();
+ usage_env_set();
exit(EXIT_FAILURE);
break;
}
retval = EXIT_FAILURE;
} else {
if (!script_file) {
- if (fw_setenv(argc, argv, &env_opts) != 0)
+ if (fw_env_set(argc, argv, &env_opts) != 0)
retval = EXIT_FAILURE;
} else {
if (fw_parse_script(script_file, &env_opts) != 0)
projects / u-boot.git / commitdiff