* - loaded (first part of) image to header load address,
* - disabled interrupts.
*
- * @flag: Command flags (CMD_FLAG_...)
+ * @flag: Flags indicating what to do (BOOTM_STATE_...)
* @argc: Number of arguments. Note that the arguments are shifted down
* so that 0 is the first argument not processed by U-Boot, and
* argc is adjusted accordingly. This avoids confusion as to how
static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- const void *os_hdr;
- int ret;
-
memset((void *)&images, 0, sizeof(images));
images.verify = getenv_yesno("verify");
boot_start_lmb(&images);
bootstage_mark_name(BOOTSTAGE_ID_BOOTM_START, "bootm_start");
+ images.state = BOOTM_STATE_START;
+
+ return 0;
+}
+
+static int bootm_find_os(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ const void *os_hdr;
/* get kernel image header, start address and length */
os_hdr = boot_get_kernel(cmdtp, flag, argc, argv,
images.ep = image_get_ep(&images.legacy_hdr_os_copy);
#if defined(CONFIG_FIT)
} else if (images.fit_uname_os) {
+ int ret;
+
ret = fit_image_get_entry(images.fit_hdr_os,
images.fit_noffset_os, &images.ep);
if (ret) {
images.ep += images.os.load;
}
+ images.os.start = (ulong)os_hdr;
+
+ return 0;
+}
+
+static int bootm_find_other(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ int ret;
+
if (((images.os.type == IH_TYPE_KERNEL) ||
(images.os.type == IH_TYPE_KERNEL_NOLOAD) ||
(images.os.type == IH_TYPE_MULTI)) &&
#endif
}
- images.os.start = (ulong)os_hdr;
- images.state = BOOTM_STATE_START;
-
return 0;
}
return 0;
}
-static int bootm_start_standalone(ulong iflag, int argc, char * const argv[])
+static int bootm_start_standalone(int argc, char * const argv[])
{
char *s;
int (*appl)(int, char * const []);
U_BOOT_CMD_MKENT(go, 0, 1, (void *)BOOTM_STATE_OS_GO, "", ""),
};
+static int boot_selected_os(int argc, char * const argv[], int state,
+ bootm_headers_t *images, boot_os_fn *boot_fn, ulong *iflag)
+{
+ if (images->os.type == IH_TYPE_STANDALONE) {
+ /* This may return when 'autostart' is 'no' */
+ bootm_start_standalone(argc, argv);
+ return 0;
+ }
+ /*
+ * We have reached the point of no return: we are going to
+ * overwrite all exception vector code, so we cannot easily
+ * recover from any failures any more...
+ */
+ *iflag = disable_interrupts();
+#ifdef CONFIG_NETCONSOLE
+ /* Stop the ethernet stack if NetConsole could have left it up */
+ eth_halt();
+#endif
+
+#if defined(CONFIG_CMD_USB)
+ /*
+ * turn off USB to prevent the host controller from writing to the
+ * SDRAM while Linux is booting. This could happen (at least for OHCI
+ * controller), because the HCCA (Host Controller Communication Area)
+ * lies within the SDRAM and the host controller writes continously to
+ * this area (as busmaster!). The HccaFrameNumber is for example
+ * updated every 1 ms within the HCCA structure in SDRAM! For more
+ * details see the OpenHCI specification.
+ */
+ usb_stop();
+#endif
+#ifdef CONFIG_SILENT_CONSOLE
+ if (images->os.os == IH_OS_LINUX)
+ fixup_silent_linux();
+#endif
+ arch_preboot_os();
+ boot_fn(state, argc, argv, images);
+ bootstage_error(BOOTSTAGE_ID_BOOT_OS_RETURNED);
+#ifdef DEBUG
+ puts("\n## Control returned to monitor - resetting...\n");
+#endif
+ return BOOTM_ERR_RESET;
+}
+
+/**
+ * Execute selected states of the bootm command.
+ *
+ * Note the arguments to this state must be the first argument, Any 'bootm'
+ * or sub-command arguments must have already been taken.
+ *
+ * Note that if states contains more than one flag it MUST contain
+ * BOOTM_STATE_START, since this handles and consumes the command line args.
+ *
+ * @param cmdtp Pointer to bootm command table entry
+ * @param flag Command flags (CMD_FLAG_...)
+ * @param argc Number of subcommand arguments (0 = no arguments)
+ * @param argv Arguments
+ * @param states Mask containing states to run (BOOTM_STATE_...)
+ * @param images Image header information
+ * @param boot_progress 1 to show boot progress, 0 to not do this
+ * @return 0 if ok, something else on error. Some errors will cause this
+ * function to perform a reboot! If states contains BOOTM_STATE_OS_GO
+ * then the intent is to boot an OS, so this function will not return
+ * unless the image type is standalone.
+ */
+static int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[], int states, bootm_headers_t *images,
+ int boot_progress)
+{
+ boot_os_fn *boot_fn;
+ ulong iflag = 0;
+ int ret = 0;
+
+ images->state |= states;
+
+ /*
+ * Work through the states and see how far we get. We stop on
+ * any error.
+ */
+ if (states & BOOTM_STATE_START)
+ ret = bootm_start(cmdtp, flag, argc, argv);
+
+ if (!ret && (states & BOOTM_STATE_FINDOS))
+ ret = bootm_find_os(cmdtp, flag, argc, argv);
+
+ if (!ret && (states & BOOTM_STATE_FINDOTHER)) {
+ ret = bootm_find_other(cmdtp, flag, argc, argv);
+ argc = 0; /* consume the args */
+ }
+
+ /* Load the OS */
+ if (!ret && (states & BOOTM_STATE_LOADOS)) {
+ ulong load_end;
+
+ ret = bootm_load_os(images->os, &load_end, 0);
+ if (!ret) {
+ lmb_reserve(&images->lmb, images->os.load,
+ (load_end - images->os.load));
+ }
+ }
+
+ /* Relocate the ramdisk */
+#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
+ if (!ret && (states & BOOTM_STATE_RAMDISK)) {
+ ulong rd_len = images->rd_end - images->rd_start;
+
+ ret = boot_ramdisk_high(&images->lmb, images->rd_start,
+ rd_len, &images->initrd_start, &images->initrd_end);
+ if (!ret) {
+ setenv_hex("initrd_start", images->initrd_start);
+ setenv_hex("initrd_end", images->initrd_end);
+ }
+ }
+#endif
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB)
+ if (!ret && (states & BOOTM_STATE_FDT)) {
+ boot_fdt_add_mem_rsv_regions(&images->lmb, images->ft_addr);
+ ret = boot_relocate_fdt(&images->lmb, &images->ft_addr,
+ &images->ft_len);
+ }
+#endif
+
+ /* From now on, we need the OS boot function */
+ if (ret)
+ return ret;
+ boot_fn = boot_os[images->os.os];
+ if (boot_fn == NULL) {
+ if (iflag)
+ enable_interrupts();
+ printf("ERROR: booting os '%s' (%d) is not supported\n",
+ genimg_get_os_name(images->os.os), images->os.os);
+ bootstage_error(BOOTSTAGE_ID_CHECK_BOOT_OS);
+ return 1;
+ }
+
+ /* Call various other states that are not generally used */
+ if (!ret && (states & BOOTM_STATE_OS_CMDLINE))
+ ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, images);
+ if (!ret && (states & BOOTM_STATE_OS_BD_T))
+ ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, images);
+ if (!ret && (states & BOOTM_STATE_OS_PREP))
+ ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, images);
+
+ /* Now run the OS! We hope this doesn't return */
+ if (!ret && (states & BOOTM_STATE_OS_GO))
+ ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_GO,
+ images, boot_fn, &iflag);
+
+ /* Deal with any fallout */
+ if (ret < 0) {
+ if (ret == BOOTM_ERR_UNIMPLEMENTED) {
+ if (iflag)
+ enable_interrupts();
+ bootstage_error(BOOTSTAGE_ID_DECOMP_UNIMPL);
+ return 1;
+ } else if (ret == BOOTM_ERR_OVERLAP) {
+ if (images->legacy_hdr_valid) {
+ if (image_get_type(&images->legacy_hdr_os_copy)
+ == IH_TYPE_MULTI)
+ puts("WARNING: legacy format multi component image overwritten\n");
+ } else {
+ puts("ERROR: new format image overwritten - must RESET the board to recover\n");
+ bootstage_error(BOOTSTAGE_ID_OVERWRITTEN);
+ ret = BOOTM_ERR_RESET;
+ }
+ }
+ if (ret == BOOTM_ERR_RESET)
+ do_reset(cmdtp, flag, argc, argv);
+ }
+ if (iflag)
+ enable_interrupts();
+ if (ret)
+ puts("subcommand not supported\n");
+
+ return ret;
+}
+
static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
int ret = 0;
long state;
cmd_tbl_t *c;
- boot_os_fn *boot_fn;
c = find_cmd_tbl(argv[0], &cmd_bootm_sub[0], ARRAY_SIZE(cmd_bootm_sub));
argc--; argv++;
if (c) {
state = (long)c->cmd;
-
- /* treat start special since it resets the state machine */
if (state == BOOTM_STATE_START)
- return bootm_start(cmdtp, flag, argc, argv);
+ state |= BOOTM_STATE_FINDOS | BOOTM_STATE_FINDOTHER;
} else {
/* Unrecognized command */
return CMD_RET_USAGE;
}
- if (images.state < BOOTM_STATE_START ||
- images.state >= state) {
+ if (state != BOOTM_STATE_START && images.state >= state) {
printf("Trying to execute a command out of order\n");
return CMD_RET_USAGE;
}
- images.state |= state;
- boot_fn = boot_os[images.os.os];
-
- switch (state) {
- ulong load_end;
- case BOOTM_STATE_START:
- /* should never occur */
- break;
- case BOOTM_STATE_LOADOS:
- ret = bootm_load_os(images.os, &load_end, 0);
- if (ret)
- return ret;
-
- lmb_reserve(&images.lmb, images.os.load,
- (load_end - images.os.load));
- break;
-#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
- case BOOTM_STATE_RAMDISK:
- {
- ulong rd_len = images.rd_end - images.rd_start;
-
- ret = boot_ramdisk_high(&images.lmb, images.rd_start,
- rd_len, &images.initrd_start, &images.initrd_end);
- if (ret)
- return ret;
-
- setenv_hex("initrd_start", images.initrd_start);
- setenv_hex("initrd_end", images.initrd_end);
- }
- break;
-#endif
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB)
- case BOOTM_STATE_FDT:
- {
- boot_fdt_add_mem_rsv_regions(&images.lmb,
- images.ft_addr);
- ret = boot_relocate_fdt(&images.lmb,
- &images.ft_addr, &images.ft_len);
- break;
- }
-#endif
- case BOOTM_STATE_OS_CMDLINE:
- ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, &images);
- if (ret)
- printf("cmdline subcommand not supported\n");
- break;
- case BOOTM_STATE_OS_BD_T:
- ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, &images);
- if (ret)
- printf("bdt subcommand not supported\n");
- break;
- case BOOTM_STATE_OS_PREP:
- ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, &images);
- if (ret)
- printf("prep subcommand not supported\n");
- break;
- case BOOTM_STATE_OS_GO:
- disable_interrupts();
-#ifdef CONFIG_NETCONSOLE
- /*
- * Stop the ethernet stack if NetConsole could have
- * left it up
- */
- eth_halt();
-#endif
- arch_preboot_os();
- boot_fn(BOOTM_STATE_OS_GO, argc, argv, &images);
- break;
- }
+ ret = do_bootm_states(cmdtp, flag, argc, argv, state, &images, 0);
return ret;
}
int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- ulong iflag;
- ulong load_end = 0;
- int ret;
- boot_os_fn *boot_fn;
#ifdef CONFIG_NEEDS_MANUAL_RELOC
static int relocated = 0;
return do_bootm_subcommand(cmdtp, flag, argc, argv);
}
- if (bootm_start(cmdtp, flag, argc, argv))
- return 1;
-
- /*
- * We have reached the point of no return: we are going to
- * overwrite all exception vector code, so we cannot easily
- * recover from any failures any more...
- */
- iflag = disable_interrupts();
-
-#ifdef CONFIG_NETCONSOLE
- /* Stop the ethernet stack if NetConsole could have left it up */
- eth_halt();
-#endif
-
-#if defined(CONFIG_CMD_USB)
- /*
- * turn off USB to prevent the host controller from writing to the
- * SDRAM while Linux is booting. This could happen (at least for OHCI
- * controller), because the HCCA (Host Controller Communication Area)
- * lies within the SDRAM and the host controller writes continously to
- * this area (as busmaster!). The HccaFrameNumber is for example
- * updated every 1 ms within the HCCA structure in SDRAM! For more
- * details see the OpenHCI specification.
- */
- usb_stop();
-#endif
-
- ret = bootm_load_os(images.os, &load_end, 1);
-
- if (ret < 0) {
- if (ret == BOOTM_ERR_RESET)
- do_reset(cmdtp, flag, argc, argv);
- if (ret == BOOTM_ERR_OVERLAP) {
- if (images.legacy_hdr_valid) {
- image_header_t *hdr;
- hdr = &images.legacy_hdr_os_copy;
- if (image_get_type(hdr) == IH_TYPE_MULTI)
- puts("WARNING: legacy format multi "
- "component image "
- "overwritten\n");
- } else {
- puts("ERROR: new format image overwritten - "
- "must RESET the board to recover\n");
- bootstage_error(BOOTSTAGE_ID_OVERWRITTEN);
- do_reset(cmdtp, flag, argc, argv);
- }
- }
- if (ret == BOOTM_ERR_UNIMPLEMENTED) {
- if (iflag)
- enable_interrupts();
- bootstage_error(BOOTSTAGE_ID_DECOMP_UNIMPL);
- return 1;
- }
- }
-
- lmb_reserve(&images.lmb, images.os.load, (load_end - images.os.load));
-
- if (images.os.type == IH_TYPE_STANDALONE) {
- if (iflag)
- enable_interrupts();
- /* This may return when 'autostart' is 'no' */
- bootm_start_standalone(iflag, argc, argv);
- return 0;
- }
-
- bootstage_mark(BOOTSTAGE_ID_CHECK_BOOT_OS);
-
-#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY)
- if (images.os.os == IH_OS_LINUX)
- fixup_silent_linux();
-#endif
-
- boot_fn = boot_os[images.os.os];
-
- if (boot_fn == NULL) {
- if (iflag)
- enable_interrupts();
- printf("ERROR: booting os '%s' (%d) is not supported\n",
- genimg_get_os_name(images.os.os), images.os.os);
- bootstage_error(BOOTSTAGE_ID_CHECK_BOOT_OS);
- return 1;
- }
-
- arch_preboot_os();
-
- boot_fn(0, argc, argv, &images);
-
- bootstage_error(BOOTSTAGE_ID_BOOT_OS_RETURNED);
-#ifdef DEBUG
- puts("\n## Control returned to monitor - resetting...\n");
-#endif
- do_reset(cmdtp, flag, argc, argv);
-
- return 1;
+ return do_bootm_states(cmdtp, flag, argc, argv, BOOTM_STATE_START |
+ BOOTM_STATE_FINDOS | BOOTM_STATE_FINDOTHER |
+ BOOTM_STATE_LOADOS | BOOTM_STATE_OS_PREP |
+ BOOTM_STATE_OS_GO, &images, 1);
}
int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd)
int ret;
void *zi_start, *zi_end;
- memset(images, 0, sizeof(bootm_headers_t));
-
- boot_start_lmb(images);
+ ret = do_bootm_states(cmdtp, flag, argc, argv, BOOTM_STATE_START,
+ images, 1);
/* Setup Linux kernel zImage entry point */
if (argc < 2) {
lmb_reserve(&images->lmb, images->ep, zi_end - zi_start);
- /* Find ramdisk */
- ret = boot_get_ramdisk(argc, argv, images, IH_INITRD_ARCH,
- &images->rd_start, &images->rd_end);
- if (ret) {
- puts("Ramdisk image is corrupt or invalid\n");
- return 1;
- }
-
-#if defined(CONFIG_OF_LIBFDT)
- /* find flattened device tree */
- ret = boot_get_fdt(flag, argc, argv, IH_ARCH_DEFAULT, images,
- &images->ft_addr, &images->ft_len);
- if (ret) {
- puts("Could not find a valid device tree\n");
- return 1;
- }
-
- set_working_fdt_addr(images->ft_addr);
-#endif
+ ret = do_bootm_states(cmdtp, flag, argc, argv, BOOTM_STATE_FINDOTHER,
+ images, 1);
- return 0;
+ return ret;
}
int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bootm_headers_t images;
+ int ret;
if (bootz_start(cmdtp, flag, argc, argv, &images))
return 1;
- /*
- * We have reached the point of no return: we are going to
- * overwrite all exception vector code, so we cannot easily
- * recover from any failures any more...
- */
- disable_interrupts();
-
-#ifdef CONFIG_NETCONSOLE
- /* Stop the ethernet stack if NetConsole could have left it up */
- eth_halt();
-#endif
+ ret = do_bootm_states(cmdtp, flag, argc, argv,
+ BOOTM_STATE_OS_GO, &images, 1);
-#if defined(CONFIG_CMD_USB)
- /*
- * turn off USB to prevent the host controller from writing to the
- * SDRAM while Linux is booting. This could happen (at least for OHCI
- * controller), because the HCCA (Host Controller Communication Area)
- * lies within the SDRAM and the host controller writes continously to
- * this area (as busmaster!). The HccaFrameNumber is for example
- * updated every 1 ms within the HCCA structure in SDRAM! For more
- * details see the OpenHCI specification.
- */
- usb_stop();
-#endif
-
-#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY)
- fixup_silent_linux();
-#endif
- arch_preboot_os();
-
- do_bootm_linux(0, argc, argv, &images);
-#ifdef DEBUG
- puts("\n## Control returned to monitor - resetting...\n");
-#endif
- do_reset(cmdtp, flag, argc, argv);
-
- return 1;
+ return ret;
}
#ifdef CONFIG_SYS_LONGHELP
projects / u-boot.git / commitdiff