i2c: imx_lpi2c: Improve the codes to use private data

Current driver calls the devfdt_get_addr to get the base address
of lpi2c controller in each sub-functions. Since the devfdt_get_addr
accesses the DTB and translate the address, it introduces much
overhead.
Improve the codes to use private variable which has recorded the
base address from probe.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

diff --git a/drivers/i2c/imx_lpi2c.c b/drivers/i2c/imx_lpi2c.c
index c8e42e05f5de4935608777f6deccd1a0fc0e0624..b7b2aafc7f673db0b5b660881122ffa1281f0a2a 100644 (file)
--- a/drivers/i2c/imx_lpi2c.c
+++ b/drivers/i2c/imx_lpi2c.c
@@ -97,7 +97,8 @@ static int bus_i2c_wait_for_tx_ready(struct imx_lpi2c_reg *regs)
 
 static int bus_i2c_send(struct udevice *bus, u8 *txbuf, int len)
 {
-       struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
+       struct imx_lpi2c_bus *i2c_bus = dev_get_priv(bus);
+       struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)(i2c_bus->base);
        lpi2c_status_t result = LPI2C_SUCESS;
 
        /* empty tx */
@@ -118,7 +119,8 @@ static int bus_i2c_send(struct udevice *bus, u8 *txbuf, int len)
 
 static int bus_i2c_receive(struct udevice *bus, u8 *rxbuf, int len)
 {
-       struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
+       struct imx_lpi2c_bus *i2c_bus = dev_get_priv(bus);
+       struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)(i2c_bus->base);
        lpi2c_status_t result = LPI2C_SUCESS;
        u32 val;
        ulong start_time = get_timer(0);
@@ -162,8 +164,8 @@ static int bus_i2c_receive(struct udevice *bus, u8 *rxbuf, int len)
 static int bus_i2c_start(struct udevice *bus, u8 addr, u8 dir)
 {
        lpi2c_status_t result;
-       struct imx_lpi2c_reg *regs =
-               (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
+       struct imx_lpi2c_bus *i2c_bus = dev_get_priv(bus);
+       struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)(i2c_bus->base);
        u32 val;
 
        result = imx_lpci2c_check_busy_bus(regs);
@@ -199,8 +201,8 @@ static int bus_i2c_start(struct udevice *bus, u8 addr, u8 dir)
 static int bus_i2c_stop(struct udevice *bus)
 {
        lpi2c_status_t result;
-       struct imx_lpi2c_reg *regs =
-               (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
+       struct imx_lpi2c_bus *i2c_bus = dev_get_priv(bus);
+       struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)(i2c_bus->base);
        u32 status;
        ulong start_time;
 
@@ -271,7 +273,7 @@ u32 __weak imx_get_i2cclk(u32 i2c_num)
 static int bus_i2c_set_bus_speed(struct udevice *bus, int speed)
 {
        struct imx_lpi2c_bus *i2c_bus = dev_get_priv(bus);
-       struct imx_lpi2c_reg *regs;
+       struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)(i2c_bus->base);
        u32 val;
        u32 preescale = 0, best_pre = 0, clkhi = 0;
        u32 best_clkhi = 0, abs_error = 0, rate;
@@ -280,8 +282,6 @@ static int bus_i2c_set_bus_speed(struct udevice *bus, int speed)
        bool mode;
        int i;
 
-       regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
-
        if (IS_ENABLED(CONFIG_CLK)) {
                clock_rate = clk_get_rate(&i2c_bus->per_clk);
                if (clock_rate <= 0) {
@@ -348,11 +348,11 @@ static int bus_i2c_set_bus_speed(struct udevice *bus, int speed)
 
 static int bus_i2c_init(struct udevice *bus, int speed)
 {
-       struct imx_lpi2c_reg *regs;
        u32 val;
        int ret;
 
-       regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
+       struct imx_lpi2c_bus *i2c_bus = dev_get_priv(bus);
+       struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)(i2c_bus->base);
        /* reset peripheral */
        writel(LPI2C_MCR_RST_MASK, &regs->mcr);
        writel(0x0, &regs->mcr);