/*
* Novena video output support
*
+ * IT6251 code based on code Copyright (C) 2014 Sean Cross
+ * from https://github.com/xobs/novena-linux.git commit
+ * 3d85836ee1377d445531928361809612aa0a18db
+ *
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
#include "novena.h"
+#define IT6251_VENDOR_ID_LOW 0x00
+#define IT6251_VENDOR_ID_HIGH 0x01
+#define IT6251_DEVICE_ID_LOW 0x02
+#define IT6251_DEVICE_ID_HIGH 0x03
+#define IT6251_SYSTEM_STATUS 0x0d
+#define IT6251_SYSTEM_STATUS_RINTSTATUS (1 << 0)
+#define IT6251_SYSTEM_STATUS_RHPDSTATUS (1 << 1)
+#define IT6251_SYSTEM_STATUS_RVIDEOSTABLE (1 << 2)
+#define IT6251_SYSTEM_STATUS_RPLL_IOLOCK (1 << 3)
+#define IT6251_SYSTEM_STATUS_RPLL_XPLOCK (1 << 4)
+#define IT6251_SYSTEM_STATUS_RPLL_SPLOCK (1 << 5)
+#define IT6251_SYSTEM_STATUS_RAUXFREQ_LOCK (1 << 6)
+#define IT6251_REF_STATE 0x0e
+#define IT6251_REF_STATE_MAIN_LINK_DISABLED (1 << 0)
+#define IT6251_REF_STATE_AUX_CHANNEL_READ (1 << 1)
+#define IT6251_REF_STATE_CR_PATTERN (1 << 2)
+#define IT6251_REF_STATE_EQ_PATTERN (1 << 3)
+#define IT6251_REF_STATE_NORMAL_OPERATION (1 << 4)
+#define IT6251_REF_STATE_MUTED (1 << 5)
+
+#define IT6251_REG_PCLK_CNT_LOW 0x57
+#define IT6251_REG_PCLK_CNT_HIGH 0x58
+
+#define IT6521_RETRY_MAX 20
+
+static int it6251_is_stable(void)
+{
+ const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
+ const unsigned int laddr = NOVENA_IT6251_LVDSADDR;
+ int status;
+ int clkcnt;
+ int rpclkcnt;
+ int refstate;
+
+ rpclkcnt = (i2c_reg_read(caddr, 0x13) & 0xff) |
+ ((i2c_reg_read(caddr, 0x14) << 8) & 0x0f00);
+ debug("RPCLKCnt: %d\n", rpclkcnt);
+
+ status = i2c_reg_read(caddr, IT6251_SYSTEM_STATUS);
+ debug("System status: 0x%02x\n", status);
+
+ clkcnt = (i2c_reg_read(laddr, IT6251_REG_PCLK_CNT_LOW) & 0xff) |
+ ((i2c_reg_read(laddr, IT6251_REG_PCLK_CNT_HIGH) << 8) &
+ 0x0f00);
+ debug("Clock: 0x%02x\n", clkcnt);
+
+ refstate = i2c_reg_read(laddr, IT6251_REF_STATE);
+ debug("Ref Link State: 0x%02x\n", refstate);
+
+ if ((refstate & 0x1f) != 0)
+ return 0;
+
+ /* If video is muted, that's a failure */
+ if (refstate & IT6251_REF_STATE_MUTED)
+ return 0;
+
+ if (!(status & IT6251_SYSTEM_STATUS_RVIDEOSTABLE))
+ return 0;
+
+ return 1;
+}
+
+static int it6251_ready(void)
+{
+ const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
+
+ /* Test if the IT6251 came out of reset by reading ID regs. */
+ if (i2c_reg_read(caddr, IT6251_VENDOR_ID_LOW) != 0x15)
+ return 0;
+ if (i2c_reg_read(caddr, IT6251_VENDOR_ID_HIGH) != 0xca)
+ return 0;
+ if (i2c_reg_read(caddr, IT6251_DEVICE_ID_LOW) != 0x51)
+ return 0;
+ if (i2c_reg_read(caddr, IT6251_DEVICE_ID_HIGH) != 0x62)
+ return 0;
+
+ return 1;
+}
+
+static void it6251_program_regs(void)
+{
+ const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
+ const unsigned int laddr = NOVENA_IT6251_LVDSADDR;
+
+ i2c_reg_write(caddr, 0x05, 0x00);
+ mdelay(1);
+
+ /* set LVDSRX address, and enable */
+ i2c_reg_write(caddr, 0xfd, 0xbc);
+ i2c_reg_write(caddr, 0xfe, 0x01);
+
+ /*
+ * LVDSRX
+ */
+ /* This write always fails, because the chip goes into reset */
+ /* reset LVDSRX */
+ i2c_reg_write(laddr, 0x05, 0xff);
+ i2c_reg_write(laddr, 0x05, 0x00);
+
+ /* reset LVDSRX PLL */
+ i2c_reg_write(laddr, 0x3b, 0x42);
+ i2c_reg_write(laddr, 0x3b, 0x43);
+
+ /* something with SSC PLL */
+ i2c_reg_write(laddr, 0x3c, 0x08);
+ /* don't swap links, but writing reserved registers */
+ i2c_reg_write(laddr, 0x0b, 0x88);
+
+ /* JEIDA, 8-bit depth 0x11, orig 0x42 */
+ i2c_reg_write(laddr, 0x2c, 0x01);
+ /* "reserved" */
+ i2c_reg_write(laddr, 0x32, 0x04);
+ /* "reserved" */
+ i2c_reg_write(laddr, 0x35, 0xe0);
+ /* "reserved" + clock delay */
+ i2c_reg_write(laddr, 0x2b, 0x24);
+
+ /* reset LVDSRX pix clock */
+ i2c_reg_write(laddr, 0x05, 0x02);
+ i2c_reg_write(laddr, 0x05, 0x00);
+
+ /*
+ * DPTX
+ */
+ /* set for two lane mode, normal op, no swapping, no downspread */
+ i2c_reg_write(caddr, 0x16, 0x02);
+
+ /* some AUX channel EDID magic */
+ i2c_reg_write(caddr, 0x23, 0x40);
+
+ /* power down lanes 3-0 */
+ i2c_reg_write(caddr, 0x5c, 0xf3);
+
+ /* enable DP scrambling, change EQ CR phase */
+ i2c_reg_write(caddr, 0x5f, 0x06);
+
+ /* color mode RGB, pclk/2 */
+ i2c_reg_write(caddr, 0x60, 0x02);
+ /* dual pixel input mode, no EO swap, no RGB swap */
+ i2c_reg_write(caddr, 0x61, 0x04);
+ /* M444B24 video format */
+ i2c_reg_write(caddr, 0x62, 0x01);
+
+ /* vesa range / not interlace / vsync high / hsync high */
+ i2c_reg_write(caddr, 0xa0, 0x0F);
+
+ /* hpd event timer set to 1.6-ish ms */
+ i2c_reg_write(caddr, 0xc9, 0xf5);
+
+ /* more reserved magic */
+ i2c_reg_write(caddr, 0xca, 0x4d);
+ i2c_reg_write(caddr, 0xcb, 0x37);
+
+ /* enhanced framing mode, auto video fifo reset, video mute disable */
+ i2c_reg_write(caddr, 0xd3, 0x03);
+
+ /* "vidstmp" and some reserved stuff */
+ i2c_reg_write(caddr, 0xd4, 0x45);
+
+ /* queue number -- reserved */
+ i2c_reg_write(caddr, 0xe7, 0xa0);
+ /* info frame packets and reserved */
+ i2c_reg_write(caddr, 0xe8, 0x33);
+ /* more AVI stuff */
+ i2c_reg_write(caddr, 0xec, 0x00);
+
+ /* select PC master reg for aux channel? */
+ i2c_reg_write(caddr, 0x23, 0x42);
+
+ /* send PC request commands */
+ i2c_reg_write(caddr, 0x24, 0x00);
+ i2c_reg_write(caddr, 0x25, 0x00);
+ i2c_reg_write(caddr, 0x26, 0x00);
+
+ /* native aux read */
+ i2c_reg_write(caddr, 0x2b, 0x00);
+ /* back to internal */
+ i2c_reg_write(caddr, 0x23, 0x40);
+
+ /* voltage swing level 3 */
+ i2c_reg_write(caddr, 0x19, 0xff);
+ /* pre-emphasis level 3 */
+ i2c_reg_write(caddr, 0x1a, 0xff);
+
+ /* start link training */
+ i2c_reg_write(caddr, 0x17, 0x01);
+}
+
+static int it6251_init(void)
+{
+ const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
+ int reg;
+ int tries, retries = 0;
+
+ for (retries = 0; retries < IT6521_RETRY_MAX; retries++) {
+ /* Program the chip. */
+ it6251_program_regs();
+
+ /* Wait for video stable. */
+ for (tries = 0; tries < 100; tries++) {
+ reg = i2c_reg_read(caddr, 0x17);
+ /* Test Link CFG, STS, LCS read done. */
+ if ((reg & 0xe0) != 0xe0) {
+ /* Not yet, wait a bit more. */
+ mdelay(2);
+ continue;
+ }
+
+ /* Test if the video input is stable. */
+ if (it6251_is_stable())
+ return 0;
+ }
+ /*
+ * If we couldn't stabilize, requeue and try again,
+ * because it means that the LVDS channel isn't
+ * stable yet.
+ */
+ printf("Display didn't stabilize.\n");
+ printf("This may be because the LVDS port is still in powersave mode.\n");
+ mdelay(50);
+ }
+
+ return -EINVAL;
+}
+
static void enable_hdmi(struct display_info_t const *dev)
{
imx_enable_hdmi_phy();
}
+static int lvds_enabled;
+
+static void enable_lvds(struct display_info_t const *dev)
+{
+ if (lvds_enabled)
+ return;
+
+ /* ITE IT6251 power enable. */
+ gpio_direction_output(NOVENA_ITE6251_PWR_GPIO, 0);
+ mdelay(10);
+ gpio_direction_output(NOVENA_ITE6251_PWR_GPIO, 1);
+ mdelay(20);
+ lvds_enabled = 1;
+}
+
+static int detect_lvds(struct display_info_t const *dev)
+{
+ int ret, loops = 250;
+
+ enable_lvds(dev);
+
+ ret = i2c_set_bus_num(NOVENA_IT6251_I2C_BUS);
+ if (ret) {
+ puts("Cannot select IT6251 I2C bus.\n");
+ return 0;
+ }
+
+ /* Wait up-to ~250 mS for the LVDS to come up. */
+ while (--loops) {
+ ret = it6251_ready();
+ if (ret)
+ return ret;
+
+ mdelay(1);
+ }
+
+ return 0;
+}
+
struct display_info_t const displays[] = {
{
/* HDMI Output */
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
},
+ }, {
+ /* LVDS Output: N133HSE-EA1 Rev. C1 */
+ .bus = -1,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_lvds,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "Chimei-FHD",
+ .refresh = 60,
+ .xres = 1920,
+ .yres = 1080,
+ .pixclock = 15384,
+ .left_margin = 148,
+ .right_margin = 88,
+ .upper_margin = 36,
+ .lower_margin = 4,
+ .hsync_len = 44,
+ .vsync_len = 5,
+ .sync = FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT |
+ FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
},
};
size_t display_count = ARRAY_SIZE(displays);
+static void enable_vpll(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ int timeout = 100000;
+
+ setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
+
+ clrsetbits_le32(&ccm->analog_pll_video,
+ BM_ANADIG_PLL_VIDEO_DIV_SELECT |
+ BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
+ BF_ANADIG_PLL_VIDEO_DIV_SELECT(37) |
+ BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1));
+
+ writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
+ writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);
+
+ clrbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
+
+ while (timeout--)
+ if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
+ break;
+ if (timeout < 0)
+ printf("Warning: video pll lock timeout!\n");
+
+ clrsetbits_le32(&ccm->analog_pll_video,
+ BM_ANADIG_PLL_VIDEO_BYPASS,
+ BM_ANADIG_PLL_VIDEO_ENABLE);
+}
+
void setup_display_clock(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
enable_ipu_clock();
+ enable_vpll();
imx_setup_hdmi();
- /* Turn on LDB0,IPU,IPU DI0 clocks */
+ /* Turn on IPU LDB DI0 clocks */
setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
- /* set LDB0, LDB1 clk select to 011/011 */
+ /* Switch LDB DI0 to PLL5 (Video PLL) */
clrsetbits_le32(&mxc_ccm->cs2cdr,
- MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK |
- MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK,
- (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) |
- (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET));
-
- setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
-
- setbits_le32(&mxc_ccm->chsccdr, CHSCCDR_CLK_SEL_LDB_DI0 <<
- MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
-
- writel(IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES |
- IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH |
- IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW |
- IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG |
- IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT |
- IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
- IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT |
- IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED |
+ MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK,
+ (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
+
+ /* LDB clock div by 3.5 */
+ clrbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
+
+ /* DI0 clock derived from ldb_di0_clk */
+ clrsetbits_le32(&mxc_ccm->chsccdr,
+ MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK,
+ (CHSCCDR_CLK_SEL_LDB_DI0 <<
+ MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
+ );
+
+ /* Enable both LVDS channels, both connected to DI0. */
+ writel(IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH |
+ IOMUXC_GPR2_BIT_MAPPING_CH1_JEIDA |
+ IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT |
+ IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA |
+ IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
+ IOMUXC_GPR2_SPLIT_MODE_EN_MASK |
+ IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0 |
IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
&iomux->gpr[2]);
- clrsetbits_le32(&iomux->gpr[3], IOMUXC_GPR3_LVDS0_MUX_CTL_MASK,
- IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
- IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+ clrsetbits_le32(&iomux->gpr[3],
+ IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
+ IOMUXC_GPR3_LVDS1_MUX_CTL_MASK,
+ (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
+ IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET) |
+ (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
+ IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET)
+ );
+}
+
+void setup_display_lvds(void)
+{
+ int ret;
+
+ ret = i2c_set_bus_num(NOVENA_IT6251_I2C_BUS);
+ if (ret) {
+ puts("Cannot select LVDS-to-eDP I2C bus.\n");
+ return;
+ }
+
+ /* The IT6251 should be ready now, if it's not, it's not connected. */
+ ret = it6251_ready();
+ if (!ret)
+ return;
+
+ /* Init the LVDS-to-eDP chip and if it succeeded, enable backlight. */
+ ret = it6251_init();
+ if (!ret) {
+ /* Backlight power enable. */
+ gpio_direction_output(NOVENA_BACKLIGHT_PWR_GPIO, 1);
+ /* PWM backlight pin, always on for full brightness. */
+ gpio_direction_output(NOVENA_BACKLIGHT_PWM_GPIO, 1);
+ }
}
projects / u-boot.git / commitdiff