ARM: OMAP3: Revamp IGEP module default configuration

The default IGEP configuration doesn't do anything useful; using some
boot.scr search logic like BeagleBoard is much more useful.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h
index 1325bfa0177147cdaa2252ee4163f767fce37e74..713b1b9e69f32517139c09d61f246974322cfabf 100644 (file)
--- a/include/configs/igep0030.h
+++ b/include/configs/igep0030.h
@@ -127,14 +127,61 @@
  */
 #define CONFIG_TWL4030_POWER           1
 
-/* Environment information */
-#define CONFIG_BOOTCOMMAND \
-       "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0"
-
 #define CONFIG_BOOTDELAY               3
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-       "usbtty=cdc_acm\0"
+       "usbtty=cdc_acm\0" \
+       "loadaddr=0x82000000\0" \
+       "usbtty=cdc_acm\0" \
+       "console=ttyS2,115200n8\0" \
+       "mpurate=500\0" \
+       "vram=12M\0" \
+       "dvimode=1024x768MR-16@60\0" \
+       "defaultdisplay=dvi\0" \
+       "mmcdev=0\0" \
+       "mmcroot=/dev/mmcblk0p2 rw\0" \
+       "mmcrootfstype=ext3 rootwait\0" \
+       "nandroot=/dev/mtdblock4 rw\0" \
+       "nandrootfstype=jffs2\0" \
+       "mmcargs=setenv bootargs console=${console} " \
+               "mpurate=${mpurate} " \
+               "vram=${vram} " \
+               "omapfb.mode=dvi:${dvimode} " \
+               "omapfb.debug=y " \
+               "omapdss.def_disp=${defaultdisplay} " \
+               "root=${mmcroot} " \
+               "rootfstype=${mmcrootfstype}\0" \
+       "nandargs=setenv bootargs console=${console} " \
+               "mpurate=${mpurate} " \
+               "vram=${vram} " \
+               "omapfb.mode=dvi:${dvimode} " \
+               "omapfb.debug=y " \
+               "omapdss.def_disp=${defaultdisplay} " \
+               "root=${nandroot} " \
+               "rootfstype=${nandrootfstype}\0" \
+       "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+       "bootscript=echo Running bootscript from mmc ...; " \
+               "source ${loadaddr}\0" \
+       "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+       "mmcboot=echo Booting from mmc ...; " \
+               "run mmcargs; " \
+               "bootm ${loadaddr}\0" \
+       "nandboot=echo Booting from onenand ...; " \
+               "run nandargs; " \
+               "onenand read ${loadaddr} 280000 400000; " \
+               "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+       "if mmc rescan ${mmcdev}; then " \
+               "if run loadbootscript; then " \
+                       "run bootscript; " \
+               "else " \
+                       "if run loaduimage; then " \
+                               "run mmcboot; " \
+                       "else run nandboot; " \
+                       "fi; " \
+               "fi; " \
+       "else run nandboot; fi"
 
 #define CONFIG_AUTO_COMPLETE           1