Kconfig: j721s2: Change K3_MCU_SCRATCHPAD_BASE to non firewalled region

On K3 HS-SE devices all the firewalls are locked by default
until sysfw comes up. Rom configures some of the firewall for its usage
along with the SRAM for R5 but the PSRAM region is still locked.

The K3 MCU Scratchpad for j721s2 was set to a PSRAM region triggering the
firewall exception before sysfw came up. The exception started happening
after adding multi dtb support that accesses the scratchpad for reading
EEPROM contents.

Old map:
┌─────────────────────────────────────┐ 0x41c00000
│                 SPL                 │
├─────────────────────────────────────┤ 0x41c61f20 (approx)
│                STACK                │
├─────────────────────────────────────┤ 0x41c65f20
│             Global data             │
│  sizeof(struct global_data) = 0xd8  │
├─────────────────────────────────────┤ gd->malloc_base = 0x41c66000
│                HEAP                 │
│  CONFIG_SYS_MALLOC_F_LEN = 0x10000  │
├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR
│               SPL BSS               │ (0x41c76000)
│  CONFIG_SPL_BSS_MAX_SIZE = 0xA000   │
├─────────────────────────────────────┤ (0x41c80000)
│               DM DATA               │
├─────────────────────────────────────┤ (0x41c84130) (approx)
│                EMPTY                │
└─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX
				        (0x41cffbfc)

New map:
┌─────────────────────────────────────┐ 0x41c00000
│                 SPL                 │
├─────────────────────────────────────┤ 0x41c61f20 (approx)
│                STACK                │
├─────────────────────────────────────┤ 0x41c65f20
│             Global data             │
│  sizeof(struct global_data) = 0xd8  │
├─────────────────────────────────────┤ gd->malloc_base = 0x41c66000
│                HEAP                 │
│  CONFIG_SYS_MALLOC_F_LEN = 0x10000  │
├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR
│               SPL BSS               │ (0x41c76000)
│  CONFIG_SPL_BSS_MAX_SIZE = 0xA000   │
├─────────────────────────────────────┤ (0x41c80000)
│               DM DATA               │
├─────────────────────────────────────┤ (0x41c84130) (approx)
│                EMPTY                │
├─────────────────────────────────────┤ SYS_K3_MCU_SCRATCHPAD_BASE
│              SCRATCHPAD             │ (0x41cff9fc)
│ SYS_K3_MCU_SCRATCHPAD_SIZE = 0x200  │
└─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX
				        (0x41cffbfc)

Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>

diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index a8c3a593d5704b70907e7dfd4c42b8fcaab46144..0ffbbf9168e86b654c01b6826f76565be39a50fe 100644 (file)
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -52,7 +52,7 @@ config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
 config SYS_K3_MCU_SCRATCHPAD_BASE
        hex
        default 0x40280000 if SOC_K3_AM654
-       default 0x40280000 if SOC_K3_J721E || SOC_K3_J721S2
+       default 0x41cff9fc if SOC_K3_J721E || SOC_K3_J721S2
        help
          Describes the base address of MCU Scratchpad RAM.