Correction patch

diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c
index e2c62772575ecd2827101528de09c53f0e373146..064d143ae485d5dff82774376546f328112e20c7 100644 (file)
--- a/board/apollon/apollon.c
+++ b/board/apollon/apollon.c
@@ -31,18 +31,32 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/sys_info.h>
 #include <asm/arch/mem.h>
-#include <i2c.h>
 #include <asm/mach-types.h>
 
 void wait_for_command_complete(unsigned int wd_base);
 
+DECLARE_GLOBAL_DATA_PTR;
+
+#define write_config_reg(reg, value)                                   \
+do {                                                                   \
+       writeb(value, reg);                                             \
+} while (0)
+
+#define mask_config_reg(reg, mask)                                     \
+do {                                                                   \
+       char value = readb(reg) & ~(mask);                              \
+       writeb(value, reg);                                             \
+} while (0)
+
 /*******************************************************
  * Routine: delay
  * Description: spinning delay to use before udelay works
-******************************************************/
-static inline void delay(unsigned long loops) {
-       __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
-                         "bne 1b":"=r" (loops):"0"(loops)); }
+ ******************************************************/
+static inline void delay(unsigned long loops)
+{
+       __asm__("1:\n" "subs %0, %1, #1\n"
+                 "bne 1b":"=r" (loops):"0"(loops));
+}
 
 /*****************************************
  * Routine: board_init
@@ -50,8 +64,6 @@ static inline void delay(unsigned long loops) {
  *****************************************/
 int board_init(void)
 {
-       DECLARE_GLOBAL_DATA_PTR;
-
        gpmc_init();            /* in SRAM or SDRM, finish GPMC */
 
        gd->bd->bi_arch_number = 919;
@@ -68,7 +80,6 @@ int board_init(void)
  **********************************************************/
 void s_init(void)
 {
-
        watchdog_init();
        set_muxconf_regs();
        delay(100);
@@ -80,7 +91,7 @@ void s_init(void)
 /*******************************************************
  * Routine: misc_init_r
  * Description: Init ethernet (done here so udelay works)
-********************************************************/
+ ********************************************************/
 int misc_init_r(void)
 {
        ether_init();           /* better done here so timers are init'ed */
@@ -102,22 +113,24 @@ void watchdog_init(void)
        __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
 
 #define MPU_WD_CLOCKED 1
-#if MPU_WD_CLOCKED             /* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
+#if MPU_WD_CLOCKED
+       /* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
        __raw_writel(WD_UNLOCK1, WD3_BASE + WSPR);
        wait_for_command_complete(WD3_BASE);
        __raw_writel(WD_UNLOCK2, WD3_BASE + WSPR);
 
        __raw_writel(WD_UNLOCK1, WD4_BASE + WSPR);
        wait_for_command_complete(WD4_BASE);
-       __raw_writel(WD_UNLOCK2, WD4_BASE + WSPR); 
-#endif 
+       __raw_writel(WD_UNLOCK2, WD4_BASE + WSPR);
+#endif
 }
 
 /******************************************************
  * Routine: wait_for_command_complete
  * Description: Wait for posting to finish on watchdog
-******************************************************/
-void wait_for_command_complete(unsigned int wd_base) {
+ ******************************************************/
+void wait_for_command_complete(unsigned int wd_base)
+{
        int pending = 1;
        do {
                pending = __raw_readl(wd_base + WWPS);
@@ -160,7 +173,7 @@ void ether_init(void)
        } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
        udelay(1000);
 
-       *((volatile unsigned char *)ETH_CONTROL_REG) &= ~0x01;
+       mask_config_reg(ETH_CONTROL_REG, 0x01);
        udelay(1000);
 
 eth_reset_err_out:
@@ -171,10 +184,9 @@ eth_reset_err_out:
 /**********************************************
  * Routine: dram_init
  * Description: sets uboots idea of sdram size
-**********************************************/
+ **********************************************/
 int dram_init(void)
 {
-       DECLARE_GLOBAL_DATA_PTR;
        unsigned int size0 = 0, size1 = 0;
        u32 mtype, btype, rev = 0, cpu = 0;
 #define NOT_EARLY 0
@@ -187,8 +199,8 @@ int dram_init(void)
        display_board_info(btype);
 
        if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
-               printf("ddr combo\n");
-               do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); /* init other chip select */
+               /* init other chip select */
+               do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
        }
 
        size0 = get_sdr_cs_size(SDRC_CS0_OSET);
@@ -224,7 +236,7 @@ void set_muxconf_regs(void)
 /*****************************************************************
  * Routine: peripheral_enable
  * Description: Enable the clks & power for perifs (GPT2, UART1,...)
-******************************************************************/
+ ******************************************************************/
 void peripheral_enable(void)
 {
        unsigned int v, if_clks = 0, func_clks = 0;
@@ -232,7 +244,8 @@ void peripheral_enable(void)
        /* Enable GP2 timer. */
        if_clks |= BIT4 | BIT3;
        func_clks |= BIT4 | BIT3;
-       v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2;   /* Sys_clk input OMAP2420_GPT2 */
+       /* Sys_clk input OMAP2420_GPT2 */
+       v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2;
        __raw_writel(v, CM_CLKSEL2_CORE);
        __raw_writel(0x1, CM_CLKSEL_WKUP);
 
@@ -241,9 +254,11 @@ void peripheral_enable(void)
        func_clks |= BIT21;
        if_clks |= BIT21;
 #endif
-       v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;     /* Interface clocks on */
+       /* Interface clocks on */
+       v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;
        __raw_writel(v, CM_ICLKEN1_CORE);
-       v = __raw_readl(CM_FCLKEN1_CORE) | func_clks;   /* Functional Clocks on */
+       /* Functional Clocks on */
+       v = __raw_readl(CM_FCLKEN1_CORE) | func_clks;
        __raw_writel(v, CM_FCLKEN1_CORE);
        delay(1000);
 
@@ -261,199 +276,110 @@ void peripheral_enable(void)
 }
 
 /****************************************
- * Routine: muxSetupUsb0 (ostboot)
+ * Routine: muxSetupUsb0   (ostboot)
  * Description: Setup usb muxing
  *****************************************/
 void muxSetupUsb0(void)
 {
-       volatile uint8 *MuxConfigReg;
-
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
-       *MuxConfigReg &= (uint8) (~0x1F);
-
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
-       *MuxConfigReg &= (uint8) (~0x1F);
-
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
-       *MuxConfigReg &= (uint8) (~0x1F);
-
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
-       *MuxConfigReg &= (uint8) (~0x1F);
-
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
-       *MuxConfigReg &= (uint8) (~0x1F);
-
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
-       *MuxConfigReg &= (uint8) (~0x1F);
-
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
-       *MuxConfigReg &= (uint8) (~0x1F);
+       mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f);
+       mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f);
+       mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f);
+       mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f);
+       mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f);
+       mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f);
+       mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f);
 }
 
-#define CONTROL_PADCONF_USB1_RCV       ((volatile uint8 *)0x480000EB)
-#define CONTROL_PADCONF_USB1_TXEN      ((volatile uint8 *)0x480000EC)
-#define CONTROL_PADCONF_GPIO69         ((volatile uint8 *)0x480000ED)
-#define CONTROL_PADCONF_GPIO70         ((volatile uint8 *)0x480000EE)
-
-#define CONTROL_PADCONF_GPIO102                ((volatile uint8 *)0x48000116)
-#define CONTROL_PADCONF_GPIO103                ((volatile uint8 *)0x48000117)
-#define CONTROL_PADCONF_GPIO104                ((volatile uint8 *)0x48000118)
-#define CONTROL_PADCONF_GPIO105                ((volatile uint8 *)0x48000119)
 /****************************************
- * Routine: muxSetupUSBHost (ostboot)
+ * Routine: muxSetupUSBHost   (ostboot)
  * Description: Setup USB Host muxing
  *****************************************/
 void muxSetupUsbHost(void)
 {
-       volatile uint8 *MuxConfigReg;
-
        /* V19 */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB1_RCV;
-       *MuxConfigReg = 1;
+       write_config_reg(CONTROL_PADCONF_USB1_RCV, 1);
        /* W20 */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB1_TXEN;
-       *MuxConfigReg = 1;
+       write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1);
        /* N14 */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO69;
-       *MuxConfigReg = 3;
+       write_config_reg(CONTROL_PADCONF_GPIO69, 3);
        /* P15 */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO70;
-       *MuxConfigReg = 3;
-
+       write_config_reg(CONTROL_PADCONF_GPIO70, 3);
        /* L18 */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO102;
-       *MuxConfigReg = 3;
+       write_config_reg(CONTROL_PADCONF_GPIO102, 3);
        /* L19 */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO103;
-       *MuxConfigReg = 3;
+       write_config_reg(CONTROL_PADCONF_GPIO103, 3);
        /* K15 */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO104;
-       *MuxConfigReg = 3;
+       write_config_reg(CONTROL_PADCONF_GPIO104, 3);
        /* K14 */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO105;
-       *MuxConfigReg = 3;
+       write_config_reg(CONTROL_PADCONF_GPIO105, 3);
 }
 
 /****************************************
- * Routine: muxSetupUART1 (ostboot)
+ * Routine: muxSetupUART1  (ostboot)
  * Description: Set up uart1 muxing
  *****************************************/
 void muxSetupUART1(void)
 {
-       volatile unsigned char *MuxConfigReg;
-
-       /* UART1_CTS pin configuration, PIN = D21 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* UART1_RTS pin configuration, PIN = H21 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* UART1_TX pin configuration, PIN = L20 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* UART1_RX pin configuration, PIN = T21 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
+       /* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_UART1_CTS, 0);
+       /* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_UART1_RTS, 0);
+       /* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_UART1_TX, 0);
+       /* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
 }
 
 /****************************************
- * Routine: muxSetupLCD (ostboot)
+ * Routine: muxSetupLCD   (ostboot)
  * Description: Setup lcd muxing
  *****************************************/
 void muxSetupLCD(void)
 {
-       volatile unsigned char *MuxConfigReg;
-
-       /* LCD_D0 pin configuration, PIN = Y7 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D1 pin configuration, PIN = P10 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D2 pin configuration, PIN = V8 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D3 pin configuration, PIN = Y8 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D4 pin configuration, PIN = W8 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D5 pin configuration, PIN = R10 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D6 pin configuration, PIN = Y9 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D7 pin configuration, PIN = V9 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D8 pin configuration, PIN = W9 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D9 pin configuration, PIN = P11 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D10 pin configuration, PIN = V10 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D11 pin configuration, PIN = Y10 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D12 pin configuration, PIN = W10 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D13 pin configuration, PIN = R11 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D14 pin configuration, PIN = V11 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D15 pin configuration, PIN = W11 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D16 pin configuration, PIN = P12 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_D17 pin configuration, PIN = R12 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_PCLK pin configuration, PIN = W6 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_VSYNC pin configuration, PIN = V7 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_HSYNC pin configuration, PIN = Y6 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* LCD_ACBIAS pin configuration, PIN = W7 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
+       /* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D0, 0);
+       /* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D1, 0);
+       /* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D2, 0);
+       /* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D3, 0);
+       /* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D4, 0);
+       /* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D5, 0);
+       /* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D6, 0);
+       /* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D7, 0);
+       /* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D8, 0);
+       /* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D9, 0);
+       /* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D10, 0);
+       /* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D11, 0);
+       /* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D12, 0);
+       /* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D13, 0);
+       /* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D14, 0);
+       /* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D15, 0);
+       /* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D16, 0);
+       /* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_D17, 0);
+       /* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0);
+       /* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0);
+       /* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0);
+       /* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0);
 }
 
 /****************************************
@@ -462,146 +388,84 @@ void muxSetupLCD(void)
  *****************************************/
 void muxSetupMMCSD(void)
 {
-       volatile unsigned char *MuxConfigReg;
-
-       /* SDMMC_CLKI pin configuration, PIN = H15 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* SDMMC_CLKO pin configuration, PIN = G19 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* SDMMC_CMD pin configuration, PIN = H18 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-       /* External pull-ups are present. */
-       /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-       /* SDMMC_DAT0 pin configuration, PIN = F20 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-       /* External pull-ups are present. */
-       /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-       /* SDMMC_DAT1 pin configuration, PIN = H14 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-       /* External pull-ups are present. */
-       /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-       /* SDMMC_DAT2 pin configuration, PIN = E19 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-       /* External pull-ups are present. */
-       /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-       /* SDMMC_DAT3 pin configuration, PIN = D19 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-       /* External pull-ups are present. */
-       /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-       /* SDMMC_DDIR0 pin configuration, PIN = F19 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* SDMMC_DDIR1 pin configuration, PIN = E20 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* SDMMC_DDIR2 pin configuration, PIN = F18 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* SDMMC_DDIR3 pin configuration, PIN = E18 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* SDMMC_CDIR pin configuration, PIN = G18 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
+       /* SDMMC_CLKI pin configuration,  PIN = H15, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0);
+       /* SDMMC_CLKO pin configuration,  PIN = G19, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0);
+       /* SDMMC_CMD pin configuration,   PIN = H18, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_CMD, 0);
+       /* SDMMC_DAT0 pin configuration,  PIN = F20, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0);
+       /* SDMMC_DAT1 pin configuration,  PIN = H14, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0);
+       /* SDMMC_DAT2 pin configuration,  PIN = E19, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0);
+       /* SDMMC_DAT3 pin configuration,  PIN = D19, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0);
+       /* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0);
+       /* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0);
+       /* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0);
+       /* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0);
+       /* SDMMC_CDIR pin configuration,  PIN = G18, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0);
 }
 
 /******************************************
  * Routine: muxSetupTouchScreen (ostboot)
- * Description: Set up touch screen muxing
-*******************************************/
+ * Description:  Set up touch screen muxing
+ *******************************************/
 void muxSetupTouchScreen(void)
 {
-       volatile unsigned char *MuxConfigReg;
-
-       /* SPI1_CLK pin configuration, PIN = U18 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* SPI1_MOSI pin configuration, PIN = V20 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* SPI1_MISO pin configuration, PIN = T18 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
-       /* SPI1_nCS0 pin configuration, PIN = U19 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0;
-       *MuxConfigReg = 0x00;   /* Mode = 0, PUPD=Disabled */
-
+       /* SPI1_CLK pin configuration,  PIN = U18, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0);
+       /* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0);
+       /* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0);
+       /* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0);
 #define CONTROL_PADCONF_GPIO85 CONTROL_PADCONF_SPI1_NCS1
-
-       /* PEN_IRQ pin configuration, PIN = N15 */
-       MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_GPIO85;
-       *MuxConfigReg = 0x03;   /* Mode = 3, PUPD=Disabled */
+       /* PEN_IRQ pin configuration,   PIN = N15, Mode = 3, PUPD=Disabled */
+       write_config_reg(CONTROL_PADCONF_GPIO85, 3);
 }
 
 /***************************************************************
  * Routine: muxSetupGPMC (ostboot)
  * Description: Configures balls which cam up in protected mode
-***************************************************************/
+ ***************************************************************/
 void muxSetupGPMC(void)
 {
-       volatile uint8 *MuxConfigReg;
-       volatile unsigned int *MCR = (volatile unsigned int *)0x4800008C;
-
-       /* gpmc_io_dir */
-       *MCR = 0x19000000;
+       /* gpmc_io_dir, MCR */
+       writel(0x4800008C, 0x19000000);
 
        /* NOR FLASH CS0 */
-       /* signal - Gpmc_clk;
-               pin - J4; offset - 0x0088; mode - 0; Byte-3  Pull/up - N/A */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3;
-       *MuxConfigReg = 0x00;
-
+       /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */
+       write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0);
        /* MPDB(Multi Port Debug Port) CS1 */
-       /* signal - gpmc_ncs1;
-               pin - N8; offset - 0x008C; mode - 0; Byte-1 Pull/up - N/A */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1;
-       *MuxConfigReg = 0x00;
-
-       /* signal - Gpmc_ncs2;
-               pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2;
-       *MuxConfigReg = 0x00;
-
-       /* signal - Gpmc_ncs3;
-               pin - N2; offset - 0x008C; mode - 0; Byte-3 Pull/up - N/A */
-       MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3;
-       *MuxConfigReg = 0x00;
-
-       MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000090);
-       *MuxConfigReg = 0x00;
-       MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000091);
-       *MuxConfigReg = 0x00;
-       MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000092);
-       *MuxConfigReg = 0x00;
-       MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000093);
-       *MuxConfigReg = 0x00;
+       /* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */
+       write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0);
+       /* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */
+       write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0);
+       /* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */
+       write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0);
+       /* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */
+       write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0);
+       /* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */
+       write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0);
+       /* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */
+       write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0);
+       /* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */
+       write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0);
 }
 
 /****************************************************************
- * Routine: muxSetupSDRC (ostboot)
+ * Routine: muxSetupSDRC  (ostboot)
  * Description: Configures balls which come up in protected mode
-****************************************************************/
+ ****************************************************************/
 void muxSetupSDRC(void)
 {
        /* It's set by IPL */

diff --git a/board/apollon/lowlevel_init.S b/board/apollon/lowlevel_init.S
index 76762599b1d5a85239d2bec3b7716436bcfa61f1..f254428c9caa0bfb8971029e64d219db866fa3de 100644 (file)
--- a/board/apollon/lowlevel_init.S
+++ b/board/apollon/lowlevel_init.S
@@ -34,13 +34,13 @@
 #define APOLLON_CS0_BASE        0x00000000
 
 #ifdef PRCM_CONFIG_I
-# define SDRC_ACTIM_CTRLA_0_VAL  0x7BA35907
-# define SDRC_ACTIM_CTRLB_0_VAL  0x00000013
-# define SDRC_RFR_CTRL_0_VAL     0x00044C01
+#define SDRC_ACTIM_CTRLA_0_VAL  0x7BA35907
+#define SDRC_ACTIM_CTRLB_0_VAL  0x00000013
+#define SDRC_RFR_CTRL_0_VAL     0x00044C01
 #elif defined(PRCM_CONFIG_II)
-# define SDRC_ACTIM_CTRLA_0_VAL  0x4A59B485
-# define SDRC_ACTIM_CTRLB_0_VAL  0x0000000C
-# define SDRC_RFR_CTRL_0_VAL     0x00030001
+#define SDRC_ACTIM_CTRLA_0_VAL  0x4A59B485
+#define SDRC_ACTIM_CTRLB_0_VAL  0x0000000C
+#define SDRC_RFR_CTRL_0_VAL     0x00030001
 #endif
 
 #define SDRAM_BASE_ADDRESS     0x80008000
@@ -56,7 +56,7 @@ lowlevel_init:
        mov     r0, pc, lsr #28
        cmp     r0, #8
        beq     prcm_setup
-       
+
 flash_setup:
        /* In Flash */
        ldr     r0, =WD2_BASE
@@ -203,7 +203,7 @@ prcm_setup:
 
        ldr     r1, =0x00000002
        str     r1, [r0, #0x340]
-       
+
         ldr     r1, =CM_CLKSEL1_CORE
 #ifdef PRCM_CONFIG_I
        ldr     r2, =0x08300C44
@@ -211,7 +211,7 @@ prcm_setup:
        ldr     r2, =0x04600C26
 #endif
         str     r2, [r1]
-       
+
         ldr     r0, =OMAP2420_CM_BASE
         ldr     r1, [r0, #0x084]
         and     r1, r1, #0x01

diff --git a/board/apollon/mem.c b/board/apollon/mem.c
index 8154d118120afcbc51797c59d894b810c18fa438..c0edca56e19f618a901454de5745346000eef49a 100644 (file)
--- a/board/apollon/mem.c
+++ b/board/apollon/mem.c
@@ -39,20 +39,19 @@
  *  is necessary until timers are accessible.
  *
  *  not inline to increase chances its in cache when called
-*************************************************************/
+ *************************************************************/
 void sdelay(unsigned long loops)
 {
-       __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
-                         "bne 1b":"=r" (loops):"0"(loops));
+       __asm__("1:\n" "subs %0, %1, #1\n"
+                 "bne 1b":"=r" (loops):"0"(loops));
 }
 
-/*****************************************************************************
+/********************************************************************
  * prcm_init() - inits clocks for PRCM as defined in clocks.h
- * (config II default). Called from SRAM, or Flash (using temp SRAM stack).
- *****************************************************************************/
-void prcm_init(void)
-{
-}
+ * (config II default).
+ *   -- called from SRAM, or Flash (using temp SRAM stack).
+ ********************************************************************/
+void prcm_init(void) { }
 
 /**************************************************************************
  * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
@@ -69,6 +68,7 @@ void make_cs1_contiguous(void)
        a_add_high = (size & 3) << 8;   /* set up low field */
        a_add_low = (size & 0x3C) >> 2; /* set up high field */
        __raw_writel((a_add_high | a_add_low), SDRC_CS_CFG);
+
 }
 
 /********************************************************
@@ -81,13 +81,18 @@ u32 mem_ok(void)
        u32 val1, val2;
        u32 pattern = 0x12345678;
 
-       __raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400);   /* clear pos A */
-       __raw_writel(pattern, OMAP2420_SDRC_CS0);       /* pattern to pos B */
-       __raw_writel(0x0, OMAP2420_SDRC_CS0 + 4);       /* remove pattern off the bus */
-       val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400);  /* get pos A value */
+       /* clear pos A */
+       __raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400);
+       /* pattern to pos B */
+       __raw_writel(pattern, OMAP2420_SDRC_CS0);
+       /* remove pattern off the bus */
+       __raw_writel(0x0, OMAP2420_SDRC_CS0 + 4);
+       /* get pos A value */
+       val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400);
        val2 = __raw_readl(OMAP2420_SDRC_CS0);  /* get val2 */
 
-       if ((val1 != 0) || (val2 != pattern))   /* see if pos A value changed */
+       /* see if pos A value changed */
+       if ((val1 != 0) || (val2 != pattern))
                return (0);
        else
                return (1);
@@ -142,9 +147,11 @@ void gpmc_init(void)
        __raw_writel(0x0, GPMC_IRQENABLE);      /* isr's sources masked */
        __raw_writel(tval, GPMC_TIMEOUT_CONTROL);       /* timeout disable */
 #ifdef CFG_NAND_BOOT
-       __raw_writel(0x001, GPMC_CONFIG);       /* set nWP, disable limited addr */
+       /* set nWP, disable limited addr */
+       __raw_writel(0x001, GPMC_CONFIG);
 #else
-       __raw_writel(0x111, GPMC_CONFIG);       /* set nWP, disable limited addr */
+       /* set nWP, disable limited addr */
+       __raw_writel(0x111, GPMC_CONFIG);
 #endif
 
        /* discover bus connection from sysboot */
@@ -164,7 +171,8 @@ void gpmc_init(void)
        __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_0);
        __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_0);
        __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_0);
-       __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_0); #else
+       __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_0);
+#else
        __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth,
                     GPMC_CONFIG1_0);
        __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
@@ -172,7 +180,6 @@ void gpmc_init(void)
        __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
        __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
        __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0);
-       /* enable new mapping */
        __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);
 #endif
        sdelay(2000);

diff --git a/board/apollon/mem.h b/board/apollon/mem.h
index aed7e1d64d20d5bbf5da478d272ca16dc0f586e7..5bc96faa957f41a518eaf0833380d40bc0ef039a 100644 (file)
--- a/board/apollon/mem.h
+++ b/board/apollon/mem.h
@@ -44,15 +44,15 @@
 #define APOLLON_242x_SDRC_DLLAB_CTRL_166MHz    0x00000506
 
 #ifdef PRCM_CONFIG_I
-# define APOLLON_2420_SDRC_ACTIM_CTRLA_0       APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz
-# define APOLLON_2420_SDRC_ACTIM_CTRLB_0       APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz
-# define APOLLON_2420_SDRC_RFR_CTRL            APOLLON_242X_SDRC_RFR_CTRL_166MHz
-# define APOLLON_2420_SDRC_DLLAB_CTRL          APOLLON_242x_SDRC_DLLAB_CTRL_166MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLA_0        APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLB_0        APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz
+#define APOLLON_2420_SDRC_RFR_CTRL     APOLLON_242X_SDRC_RFR_CTRL_166MHz
+#define APOLLON_2420_SDRC_DLLAB_CTRL   APOLLON_242x_SDRC_DLLAB_CTRL_166MHz
 #elif PRCM_CONFIG_II
-# define APOLLON_2420_SDRC_ACTIM_CTRLA_0       APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define APOLLON_2420_SDRC_ACTIM_CTRLB_0       APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define APOLLON_2420_SDRC_RFR_CTRL            APOLLON_242X_SDRC_RFR_CTRL_100MHz
-# define APOLLON_2420_SDRC_DLLAB_CTRL          APOLLON_242x_SDRC_DLLAB_CTRL_100MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLA_0        APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLB_0        APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz
+#define APOLLON_2420_SDRC_RFR_CTRL     APOLLON_242X_SDRC_RFR_CTRL_100MHz
+#define APOLLON_2420_SDRC_DLLAB_CTRL   APOLLON_242x_SDRC_DLLAB_CTRL_100MHz
 #endif
 
 /* GPMC settings */

diff --git a/board/apollon/sys_info.c b/board/apollon/sys_info.c
index 60c35b4586b814510e0d5a15fe96baf168fde8ff..26ac9a2c8d0e9a5bd626aa1870f078844cdd0ddc 100644 (file)
--- a/board/apollon/sys_info.c
+++ b/board/apollon/sys_info.c
@@ -39,6 +39,7 @@ static u32 get_prod_id(void)
        p = __raw_readl(PRODUCTION_ID); /* get production ID */
        return ((p & CPU_242X_PID_MASK) >> 16);
 }
+
 /**************************************************************************
  * get_cpu_type() - low level get cpu type
  * - no C globals yet.
@@ -68,7 +69,8 @@ u32 get_cpu_type(void)
 
        v = __raw_readl(TAP_IDCODE_REG);
        v &= CPU_24XX_ID_MASK;
-       if (v == CPU_2420_CHIPID) {     /* currently 2420 and 2422 have same id */
+       /* currently 2420 and 2422 have same id */
+       if (v == CPU_2420_CHIPID) {
                if (is_gpmc_muxed() == GPMC_MUXED)      /* if mux'ed */
                        return (CPU_2420);
                else
@@ -127,8 +129,7 @@ u32 get_mem_type(void)
                return (DDR_DISCRETE);  /* origional SDP */
 }
 
-/**********************************************************************
- *
+/***********************************************************************
  * get_cs0_size() - get size of chip select 0/1
  ************************************************************************/
 u32 get_sdr_cs_size(u32 offset)
@@ -140,8 +141,7 @@ u32 get_sdr_cs_size(u32 offset)
        return (size);
 }
 
-/**********************************************************************
- *
+/***********************************************************************
  * get_board_type() - get board type based on current production stats.
  *  --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
  *      when they are available we can get info from there.  This should
@@ -149,17 +149,12 @@ u32 get_sdr_cs_size(u32 offset)
  ************************************************************************/
 u32 get_board_type(void)
 {
-#if 0
-       if (i2c_probe(I2C_MENELAUS) == 0)
-               return (BOARD_H4_MENELAUS);
-       else
-#endif
-               return (BOARD_H4_SDP);
+       return (BOARD_H4_SDP);
 }
 
 /******************************************************************
  * get_sysboot_value() - get init word settings (dip switch on h4)
-******************************************************************/
+ ******************************************************************/
 inline u32 get_sysboot_value(void)
 {
        return (0x00000FFF & __raw_readl(CONTROL_STATUS));
@@ -175,7 +170,7 @@ inline u32 get_sysboot_value(void)
  *       -- 4 to flash
  *       -- 8 to enent
  *       -- c to wifi
- ***************************************************************************/
+ ****************************************************************************/
 u32 get_gpmc0_base(void)
 {
        u32 b;
@@ -231,8 +226,8 @@ u32 get_gpmc0_width(void)
  * wait_on_value() - common routine to allow waiting for changes in
  *   volatile regs.
  *********************************************************************/
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr,
-u32 bound) {
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
+{
        u32 i = 0, val;
        do {
                ++i;
@@ -304,7 +299,8 @@ void display_board_info(u32 btype)
        }
 
        printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev - 1);
-       printf("Samsung Apollon SDP Base Board + %s \n", mem_s); }
+       printf("Samsung Apollon SDP Base Board + %s \n", mem_s);
+}
 
 /*************************************************************************
  * get_board_rev() - setup to pass kernel board revision information
@@ -316,9 +312,8 @@ u32 get_board_rev(void)
        u32 rev = 0;
        u32 btype = get_board_type();
 
-       if (btype == BOARD_H4_MENELAUS) {
+       if (btype == BOARD_H4_MENELAUS)
                rev = 1;
-       }
        return (rev);
 }
 

diff --git a/board/apollon/u-boot.lds b/board/apollon/u-boot.lds
index 686d86b76ed557bf1f497a02736dc0f6748e244a..c67cd3cda7f0b88ef5b43a45995f91303482b013 100644 (file)
--- a/board/apollon/u-boot.lds
+++ b/board/apollon/u-boot.lds
@@ -36,7 +36,7 @@ SECTIONS
        . = 0x00000000;
 
        . = ALIGN(4);
-       .text    :
+       .text   :
        {
                cpu/arm1136/start.o     (.text)
                *(.text)
@@ -61,4 +61,3 @@ SECTIONS
        .bss : { *(.bss) }
        _end = .;
 }
-

diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-arm1136/mux.h
index 8bcd7a3685d86063921826182cf1fdc12cc99057..4fdb9c635fd5576749393ae6818bcca1ffe488ed 100644 (file)
--- a/include/asm-arm/arch-arm1136/mux.h
+++ b/include/asm-arm/arch-arm1136/mux.h
@@ -54,6 +54,10 @@ void muxSetupHDQ(void);
 #define CONTROL_PADCONF_GPMC_NCS0_BYTE1        ((volatile unsigned char *)0x4800008D)
 #define CONTROL_PADCONF_GPMC_NCS0_BYTE2        ((volatile unsigned char *)0x4800008E)
 #define CONTROL_PADCONF_GPMC_NCS0_BYTE3        ((volatile unsigned char *)0x4800008F)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE4        (0x48000090)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE5        (0x48000091)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE6        (0x48000092)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE7        (0x48000093)
 
 /* Pin Muxing registers used for SDRC */
 #define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0)
@@ -71,7 +75,7 @@ void muxSetupHDQ(void);
 #define CONTROL_PADCONF_SPI1_SIMO       ((volatile unsigned char *)0x48000100)
 #define CONTROL_PADCONF_SPI1_SOMI       ((volatile unsigned char *)0x48000101)
 #define CONTROL_PADCONF_SPI1_NCS0       ((volatile unsigned char *)0x48000102)
-#define CONTROL_PADCONF_SPI1_NCS1       ((volatile unsigned char *)0x48000103)
+#define CONTROL_PADCONF_SPI1_NCS1       (0x48000103)
 
 #define CONTROL_PADCONF_MCBSP1_FSR      ((volatile unsigned char *)0x4800010B)
 
@@ -153,8 +157,20 @@ void muxSetupHDQ(void);
 #define CONTROL_PADCONF_USB0_SE0               ((volatile uint8 *)0x48000122)
 #define CONTROL_PADCONF_USB0_DAT               ((volatile uint8 *)0x48000123)
 
+/* Pin Muxing registres used for USB1. */
+#define CONTROL_PADCONF_USB1_RCV       (0x480000EB)
+#define CONTROL_PADCONF_USB1_TXEN      (0x480000EC)
+
 /* Pin Muxing registers used for UART3/IRDA */
 #define CONTROL_PADCONF_UART3_TX_IRTX  ((volatile uint8 *)0x48000118)
 #define CONTROL_PADCONF_UART3_RX_IRRX  ((volatile uint8 *)0x48000119)
 
+/* Pin Muxing registers used for GPIO */
+#define CONTROL_PADCONF_GPIO69         (0x480000ED)
+#define CONTROL_PADCONF_GPIO70         (0x480000EE)
+#define CONTROL_PADCONF_GPIO102                (0x48000116)
+#define CONTROL_PADCONF_GPIO103                (0x48000117)
+#define CONTROL_PADCONF_GPIO104                (0x48000118)
+#define CONTROL_PADCONF_GPIO105                (0x48000119)
+
 #endif