return 0;
}
-/* The Integrator/AP timer1 is clocked at 24MHz
- * can be divided by 16 or 256
- * and is a 16-bit counter
- */
-/* U-Boot expects a 32 bit timer running at CONFIG_SYS_HZ*/
-static ulong timestamp; /* U-Boot ticks since startup */
-static ulong total_count = 0; /* Total timer count */
-static ulong lastdec; /* Timer reading at last call */
-static ulong div_clock = 256; /* Divisor applied to the timer clock */
-static ulong div_timer = 1; /* Divisor to convert timer reading
- * change to U-Boot ticks
- */
-/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
-
-#define TIMER_LOAD_VAL 0x0000FFFFL
-#define READ_TIMER ((*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4)) & 0x0000FFFFL)
-
-/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
- * - unless otherwise stated
- */
-
-/* starts a counter
- * - the Integrator/AP timer issues an interrupt
- * each time it reaches zero
- */
-int timer_init (void)
-{
- /* Load timer with initial value */
- *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
- /* Set timer to be
- * enabled 1
- * free-running 0
- * XX 00
- * divider 256 10
- * XX 00
- */
- *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
- total_count = 0;
- /* init the timestamp and lastdec value */
- reset_timer_masked();
-
- div_timer = CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ;
- div_timer /= div_clock;
-
- return (0);
-}
-
-/*
- * timer without interrupts
- */
-void reset_timer (void)
-{
- reset_timer_masked ();
-}
-
-ulong get_timer (ulong base_ticks)
-{
- return get_timer_masked () - base_ticks;
-}
-
-void set_timer (ulong ticks)
-{
- timestamp = ticks;
- total_count = ticks * div_timer;
- reset_timer_masked();
-}
-
-/* delay x useconds */
-void udelay (unsigned long usec)
-{
- ulong tmo, tmp;
-
- /* Convert to U-Boot ticks */
- tmo = usec * CONFIG_SYS_HZ;
- tmo /= (1000000L);
-
- tmp = get_timer_masked(); /* get current timestamp */
- tmo += tmp; /* wake up timestamp */
-
- while (get_timer_masked () < tmo) { /* loop till event */
- /*NOP*/;
- }
-}
-
-void reset_timer_masked (void)
-{
- /* reset time */
- lastdec = READ_TIMER; /* capture current decrementer value */
- timestamp = 0; /* start "advancing" time stamp from 0 */
-}
-
-/* converts the timer reading to U-Boot ticks */
-/* the timestamp is the number of ticks since reset */
-/* This routine does not detect wraps unless called regularly
- ASSUMES a call at least every 16 seconds to detect every reload */
-ulong get_timer_masked (void)
-{
- ulong now = READ_TIMER; /* current count */
-
- if (now > lastdec) {
- /* Must have wrapped */
- total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
- } else {
- total_count += lastdec - now;
- }
- lastdec = now;
- timestamp = total_count/div_timer;
-
- return timestamp;
-}
-
-/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
-{
- udelay(usec);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * Return the timebase clock frequency
- * i.e. how often the timer decrements
- */
-ulong get_tbclk (void)
-{
- return CONFIG_SYS_HZ_CLOCK/div_clock;
-}
-
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* The Integrator/AP timer1 is clocked at 24MHz
+ * can be divided by 16 or 256
+ * and is a 16-bit counter
+ */
+/* U-Boot expects a 32 bit timer running at CONFIG_SYS_HZ*/
+static ulong timestamp; /* U-Boot ticks since startup */
+static ulong total_count = 0; /* Total timer count */
+static ulong lastdec; /* Timer reading at last call */
+static ulong div_clock = 256; /* Divisor applied to the timer clock */
+static ulong div_timer = 1; /* Divisor to convert timer reading
+ * change to U-Boot ticks
+ */
+/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
+
+#define TIMER_LOAD_VAL 0x0000FFFFL
+#define READ_TIMER ((*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4)) & 0x0000FFFFL)
+
+/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
+ * - unless otherwise stated
+ */
+
+/* starts a counter
+ * - the Integrator/AP timer issues an interrupt
+ * each time it reaches zero
+ */
+int timer_init (void)
+{
+ /* Load timer with initial value */
+ *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
+ /* Set timer to be
+ * enabled 1
+ * free-running 0
+ * XX 00
+ * divider 256 10
+ * XX 00
+ */
+ *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
+ total_count = 0;
+ /* init the timestamp and lastdec value */
+ reset_timer_masked();
+
+ div_timer = CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ;
+ div_timer /= div_clock;
+
+ return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+void reset_timer (void)
+{
+ reset_timer_masked ();
+}
+
+ulong get_timer (ulong base_ticks)
+{
+ return get_timer_masked () - base_ticks;
+}
+
+void set_timer (ulong ticks)
+{
+ timestamp = ticks;
+ total_count = ticks * div_timer;
+ reset_timer_masked();
+}
+
+/* delay x useconds */
+void udelay (unsigned long usec)
+{
+ ulong tmo, tmp;
+
+ /* Convert to U-Boot ticks */
+ tmo = usec * CONFIG_SYS_HZ;
+ tmo /= (1000000L);
+
+ tmp = get_timer_masked(); /* get current timestamp */
+ tmo += tmp; /* wake up timestamp */
+
+ while (get_timer_masked () < tmo) { /* loop till event */
+ /*NOP*/;
+ }
+}
+
+void reset_timer_masked (void)
+{
+ /* reset time */
+ lastdec = READ_TIMER; /* capture current decrementer value */
+ timestamp = 0; /* start "advancing" time stamp from 0 */
+}
+
+/* converts the timer reading to U-Boot ticks */
+/* the timestamp is the number of ticks since reset */
+/* This routine does not detect wraps unless called regularly
+ ASSUMES a call at least every 16 seconds to detect every reload */
+ulong get_timer_masked (void)
+{
+ ulong now = READ_TIMER; /* current count */
+
+ if (now > lastdec) {
+ /* Must have wrapped */
+ total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
+ } else {
+ total_count += lastdec - now;
+ }
+ lastdec = now;
+ timestamp = total_count/div_timer;
+
+ return timestamp;
+}
+
+/* waits specified delay value and resets timestamp */
+void udelay_masked (unsigned long usec)
+{
+ udelay(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * Return the timebase clock frequency
+ * i.e. how often the timer decrements
+ */
+ulong get_tbclk (void)
+{
+ return CONFIG_SYS_HZ_CLOCK/div_clock;
+}
projects / u-boot.git / commitdiff