static int nand_wait(struct mtd_info *mtd, struct nand_chip *this);
+static int check_offs_len(struct mtd_info *mtd,
+ loff_t ofs, uint64_t len)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret = 0;
+
+ /* Start address must align on block boundary */
+ if (ofs & ((1 << chip->phys_erase_shift) - 1)) {
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
+ ret = -EINVAL;
+ }
+
+ /* Length must align on block boundary */
+ if (len & ((1 << chip->phys_erase_shift) - 1)) {
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
+ __func__);
+ ret = -EINVAL;
+ }
+
+ /* Do not allow past end of device */
+ if (ofs + len > mtd->size) {
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Past end of device\n",
+ __func__);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
/**
* nand_release_device - [GENERIC] release chip
* @mtd: MTD device structure
*/
static void nand_release_device(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd->priv;
- this->select_chip(mtd, -1); /* De-select the NAND device */
+ struct nand_chip *chip = mtd->priv;
+
+ /* De-select the NAND device */
+ chip->select_chip(mtd, -1);
}
/**
struct nand_chip *chip = mtd->priv;
u16 bad;
+ if (chip->options & NAND_BBT_SCANLASTPAGE)
+ ofs += mtd->erasesize - mtd->writesize;
+
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
if (getchip) {
bad = cpu_to_le16(chip->read_word(mtd));
if (chip->badblockpos & 0x1)
bad >>= 8;
- if ((bad & 0xFF) != 0xff)
- res = 1;
+ else
+ bad &= 0xFF;
} else {
chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page);
- if (chip->read_byte(mtd) != 0xff)
- res = 1;
+ bad = chip->read_byte(mtd);
}
+ if (likely(chip->badblockbits == 8))
+ res = bad != 0xFF;
+ else
+ res = hweight8(bad) < chip->badblockbits;
+
if (getchip)
nand_release_device(mtd);
{
struct nand_chip *chip = mtd->priv;
uint8_t buf[2] = { 0, 0 };
- int block, ret;
+ int block, ret, i = 0;
+
+ if (chip->options & NAND_BBT_SCANLASTPAGE)
+ ofs += mtd->erasesize - mtd->writesize;
/* Get block number */
block = (int)(ofs >> chip->bbt_erase_shift);
if (chip->options & NAND_USE_FLASH_BBT)
ret = nand_update_bbt(mtd, ofs);
else {
- /* We write two bytes, so we dont have to mess with 16 bit
- * access
- */
nand_get_device(chip, mtd, FL_WRITING);
- ofs += mtd->oobsize;
- chip->ops.len = chip->ops.ooblen = 2;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = buf;
- chip->ops.ooboffs = chip->badblockpos & ~0x01;
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ /* Write to first two pages and to byte 1 and 6 if necessary.
+ * If we write to more than one location, the first error
+ * encountered quits the procedure. We write two bytes per
+ * location, so we dont have to mess with 16 bit access.
+ */
+ do {
+ chip->ops.len = chip->ops.ooblen = 2;
+ chip->ops.datbuf = NULL;
+ chip->ops.oobbuf = buf;
+ chip->ops.ooboffs = chip->badblockpos & ~0x01;
+
+ ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+
+ if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) {
+ chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS
+ & ~0x01;
+ ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ }
+ i++;
+ ofs += mtd->writesize;
+ } while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) &&
+ i < 2);
+
nand_release_device(mtd);
}
if (!ret)
static int nand_check_wp(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
+
+ /* broken xD cards report WP despite being writable */
+ if (chip->options & NAND_BROKEN_XD)
+ return 0;
+
/* Check the WP bit */
chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
{
struct nand_chip *chip = mtd->priv;
- if (!(chip->options & NAND_BBT_SCANNED)) {
- chip->options |= NAND_BBT_SCANNED;
- chip->scan_bbt(mtd);
- }
-
if (!chip->bbt)
return chip->block_bad(mtd, ofs, getchip);
*
* Get the device and lock it for exclusive access
*/
-static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
+static int
+nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
{
- this->state = new_state;
+ chip->state = new_state;
return 0;
}
* Erase can take up to 400ms and program up to 20ms according to
* general NAND and SmartMedia specs
*/
-static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
+static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
unsigned long timeo;
- int state = this->state;
+ int state = chip->state;
u32 time_start;
if (state == FL_ERASING)
else
timeo = (CONFIG_SYS_HZ * 20) / 1000;
- if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
- this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
+ if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
+ chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
else
- this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
time_start = get_timer(0);
return 0x01;
}
- if (this->dev_ready) {
- if (this->dev_ready(mtd))
+ if (chip->dev_ready) {
+ if (chip->dev_ready(mtd))
break;
} else {
- if (this->read_byte(mtd) & NAND_STATUS_READY)
+ if (chip->read_byte(mtd) & NAND_STATUS_READY)
break;
}
}
;
#endif /* PPCHAMELON_NAND_TIMER_HACK */
- return this->read_byte(mtd);
+ return (int)chip->read_byte(mtd);
}
/**
int data_col_addr, i, gaps = 0;
int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+ int index = 0;
/* Column address wihin the page aligned to ECC size (256bytes). */
start_step = data_offs / chip->ecc.size;
} else {
/* send the command to read the particular ecc bytes */
/* take care about buswidth alignment in read_buf */
- aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+ index = start_step * chip->ecc.bytes;
+
+ aligned_pos = eccpos[index] & ~(busw - 1);
aligned_len = eccfrag_len;
- if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+ if (eccpos[index] & (busw - 1))
aligned_len++;
- if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+ if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
aligned_len++;
- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+ mtd->writesize + aligned_pos, -1);
chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
}
for (i = 0; i < eccfrag_len; i++)
- chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+ chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
p = bufpoi + data_col_addr;
for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
int stat;
- stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
- if (stat == -1)
+ stat = chip->ecc.correct(mtd, p,
+ &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+ if (stat < 0)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
+ uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ?
+ mtd->oobavail : mtd->oobsize;
+
uint8_t *bufpoi, *oob, *buf;
stats = mtd->ecc_stats;
/* Transfer not aligned data */
if (!aligned) {
- if (!NAND_SUBPAGE_READ(chip) && !oob)
+ if (!NAND_SUBPAGE_READ(chip) && !oob &&
+ !(mtd->ecc_stats.failed - stats.failed))
chip->pagebuf = realpage;
memcpy(buf, chip->buffers->databuf + col, bytes);
}
buf += bytes;
if (unlikely(oob)) {
- /* Raw mode does data:oob:data:oob */
- if (ops->mode != MTD_OOB_RAW) {
- int toread = min(oobreadlen,
- chip->ecc.layout->oobavail);
- if (toread) {
- oob = nand_transfer_oob(chip,
- oob, ops, toread);
- oobreadlen -= toread;
- }
- } else
- buf = nand_transfer_oob(chip,
- buf, ops, mtd->oobsize);
+
+ int toread = min(oobreadlen, max_oobsize);
+
+ if (toread) {
+ oob = nand_transfer_oob(chip,
+ oob, ops, toread);
+ oobreadlen -= toread;
+ }
}
if (!(chip->options & NAND_NO_READRDY)) {
* nand_fill_oob - [Internal] Transfer client buffer to oob
* @chip: nand chip structure
* @oob: oob data buffer
+ * @len: oob data write length
* @ops: oob ops structure
*/
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob,
- struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
{
- size_t len = ops->ooblen;
-
switch (ops->mode) {
case MTD_OOB_PLACE:
return NULL;
}
-#define NOTALIGNED(x) (x & (chip->subpagesize - 1)) != 0
+#define NOTALIGNED(x) ((x & (chip->subpagesize - 1)) != 0)
/**
* nand_do_write_ops - [Internal] NAND write with ECC
int chipnr, realpage, page, blockmask, column;
struct nand_chip *chip = mtd->priv;
uint32_t writelen = ops->len;
+
+ uint32_t oobwritelen = ops->ooblen;
+ uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+ mtd->oobavail : mtd->oobsize;
+
uint8_t *oob = ops->oobbuf;
uint8_t *buf = ops->datbuf;
int ret, subpage;
if (likely(!oob))
memset(chip->oob_poi, 0xff, mtd->oobsize);
+ /* Don't allow multipage oob writes with offset */
+ if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
+ return -EINVAL;
+
while (1) {
WATCHDOG_RESET();
wbuf = chip->buffers->databuf;
}
- if (unlikely(oob))
- oob = nand_fill_oob(chip, oob, ops);
+ if (unlikely(oob)) {
+ size_t len = min(oobwritelen, oobmaxlen);
+ oob = nand_fill_oob(chip, oob, len, ops);
+ oobwritelen -= len;
+ }
ret = chip->write_page(mtd, chip, wbuf, page, cached,
(ops->mode == MTD_OOB_RAW));
chip->pagebuf = -1;
memset(chip->oob_poi, 0xff, mtd->oobsize);
- nand_fill_oob(chip, ops->oobbuf, ops);
+ nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
memset(chip->oob_poi, 0xff, mtd->oobsize);
__func__, (unsigned long long)instr->addr,
(unsigned long long)instr->len);
- /* Start address must align on block boundary */
- if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) {
- MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
+ if (check_offs_len(mtd, instr->addr, instr->len))
return -EINVAL;
- }
- /* Length must align on block boundary */
- if (instr->len & ((1 << chip->phys_erase_shift) - 1)) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "nand_erase: Length not block aligned\n");
- return -EINVAL;
- }
-
- /* Do not allow erase past end of device */
- if ((instr->len + instr->addr) > mtd->size) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "nand_erase: Erase past end of device\n");
- return -EINVAL;
- }
-
- instr->fail_addr = 0xffffffff;
+ instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
/* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_ERASING);
struct nand_chip *chip = mtd->priv;
int ret;
- if ((ret = nand_block_isbad(mtd, ofs))) {
+ ret = nand_block_isbad(mtd, ofs);
+ if (ret) {
/* If it was bad already, return success and do nothing. */
if (ret > 0)
return 0;
int i;
int val;
+ /* try ONFI for unknow chip or LP */
chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
if (!mtd->name)
mtd->name = p->model;
-
mtd->writesize = le32_to_cpu(p->byte_per_page);
mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
if (le16_to_cpu(p->features) & 1)
*busw = NAND_BUSWIDTH_16;
+ chip->options &= ~NAND_CHIPOPTIONS_MSK;
+ chip->options |= (NAND_NO_READRDY |
+ NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK;
+
return 1;
}
#else
}
#endif
-static void nand_flash_detect_non_onfi(struct mtd_info *mtd,
- struct nand_chip *chip,
- const struct nand_flash_dev *type,
- int *busw)
-{
- /* Newer devices have all the information in additional id bytes */
- if (!type->pagesize) {
- int extid;
- /* The 3rd id byte holds MLC / multichip data */
- chip->cellinfo = chip->read_byte(mtd);
- /* The 4th id byte is the important one */
- extid = chip->read_byte(mtd);
- /* Calc pagesize */
- mtd->writesize = 1024 << (extid & 0x3);
- extid >>= 2;
- /* Calc oobsize */
- mtd->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9);
- extid >>= 2;
- /* Calc blocksize. Blocksize is multiples of 64KiB */
- mtd->erasesize = (64 * 1024) << (extid & 0x03);
- extid >>= 2;
- /* Get buswidth information */
- *busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-
- } else {
- /*
- * Old devices have chip data hardcoded in the device id table
- */
- mtd->erasesize = type->erasesize;
- mtd->writesize = type->pagesize;
- mtd->oobsize = mtd->writesize / 32;
- *busw = type->options & NAND_BUSWIDTH_16;
- }
-}
-
/*
* Get the flash and manufacturer id and lookup if the type is supported
*/
int *maf_id, int *dev_id,
const struct nand_flash_dev *type)
{
- int ret, maf_idx;
- int tmp_id, tmp_manf;
+ int i, maf_idx;
+ u8 id_data[8];
+ int ret;
/* Select the device */
chip->select_chip(mtd, 0);
chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
- /* Read manufacturer and device IDs */
-
- tmp_manf = chip->read_byte(mtd);
- tmp_id = chip->read_byte(mtd);
+ for (i = 0; i < 2; i++)
+ id_data[i] = chip->read_byte(mtd);
- if (tmp_manf != *maf_id || tmp_id != *dev_id) {
+ if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
printk(KERN_INFO "%s: second ID read did not match "
"%02x,%02x against %02x,%02x\n", __func__,
- *maf_id, *dev_id, tmp_manf, tmp_id);
+ *maf_id, *dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
if (*dev_id == type->id)
break;
- if (!type->name) {
- /* supress warning if there is no nand */
- if (*maf_id != 0x00 && *maf_id != 0xff &&
- *dev_id != 0x00 && *dev_id != 0xff)
- printk(KERN_INFO "%s: unknown NAND device: "
- "Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
- __func__, *maf_id, *dev_id);
- return ERR_PTR(-ENODEV);
+ chip->onfi_version = 0;
+ if (!type->name || !type->pagesize) {
+ /* Check is chip is ONFI compliant */
+ ret = nand_flash_detect_onfi(mtd, chip, &busw);
+ if (ret)
+ goto ident_done;
}
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+ /* Read entire ID string */
+
+ for (i = 0; i < 8; i++)
+ id_data[i] = chip->read_byte(mtd);
+
+ if (!type->name)
+ return ERR_PTR(-ENODEV);
+
if (!mtd->name)
mtd->name = type->name;
chip->chipsize = (uint64_t)type->chipsize << 20;
- chip->onfi_version = 0;
- ret = nand_flash_detect_onfi(mtd, chip, &busw);
- if (!ret)
- nand_flash_detect_non_onfi(mtd, chip, type, &busw);
+ if (!type->pagesize && chip->init_size) {
+ /* set the pagesize, oobsize, erasesize by the driver*/
+ busw = chip->init_size(mtd, chip, id_data);
+ } else if (!type->pagesize) {
+ int extid;
+ /* The 3rd id byte holds MLC / multichip data */
+ chip->cellinfo = id_data[2];
+ /* The 4th id byte is the important one */
+ extid = id_data[3];
+
+ /*
+ * Field definitions are in the following datasheets:
+ * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
+ * New style (6 byte ID): Samsung K9GBG08U0M (p.40)
+ *
+ * Check for wraparound + Samsung ID + nonzero 6th byte
+ * to decide what to do.
+ */
+ if (id_data[0] == id_data[6] && id_data[1] == id_data[7] &&
+ id_data[0] == NAND_MFR_SAMSUNG &&
+ (chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ id_data[5] != 0x00) {
+ /* Calc pagesize */
+ mtd->writesize = 2048 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ switch (extid & 0x03) {
+ case 1:
+ mtd->oobsize = 128;
+ break;
+ case 2:
+ mtd->oobsize = 218;
+ break;
+ case 3:
+ mtd->oobsize = 400;
+ break;
+ default:
+ mtd->oobsize = 436;
+ break;
+ }
+ extid >>= 2;
+ /* Calc blocksize */
+ mtd->erasesize = (128 * 1024) <<
+ (((extid >> 1) & 0x04) | (extid & 0x03));
+ busw = 0;
+ } else {
+ /* Calc pagesize */
+ mtd->writesize = 1024 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ mtd->oobsize = (8 << (extid & 0x01)) *
+ (mtd->writesize >> 9);
+ extid >>= 2;
+ /* Calc blocksize. Blocksize is multiples of 64KiB */
+ mtd->erasesize = (64 * 1024) << (extid & 0x03);
+ extid >>= 2;
+ /* Get buswidth information */
+ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+ }
+ } else {
+ /*
+ * Old devices have chip data hardcoded in the device id table
+ */
+ mtd->erasesize = type->erasesize;
+ mtd->writesize = type->pagesize;
+ mtd->oobsize = mtd->writesize / 32;
+ busw = type->options & NAND_BUSWIDTH_16;
+ /*
+ * Check for Spansion/AMD ID + repeating 5th, 6th byte since
+ * some Spansion chips have erasesize that conflicts with size
+ * listed in nand_ids table
+ * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
+ */
+ if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 &&
+ id_data[5] == 0x00 && id_data[6] == 0x00 &&
+ id_data[7] == 0x00 && mtd->writesize == 512) {
+ mtd->erasesize = 128 * 1024;
+ mtd->erasesize <<= ((id_data[3] & 0x03) << 1);
+ }
+ }
/* Get chip options, preserve non chip based options */
chip->options &= ~NAND_CHIPOPTIONS_MSK;
chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
+ /* Check if chip is a not a samsung device. Do not clear the
+ * options for chips which are not having an extended id.
+ */
+ if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
+ chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+ident_done:
+
/*
* Set chip as a default. Board drivers can override it, if necessary
*/
ffs(mtd->erasesize) - 1;
if (chip->chipsize & 0xffffffff)
chip->chip_shift = ffs((unsigned)chip->chipsize) - 1;
- else
- chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 31;
+ else {
+ chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32));
+ chip->chip_shift += 32 - 1;
+ }
+
+ chip->badblockbits = 8;
/* Set the bad block position */
- chip->badblockpos = mtd->writesize > 512 ?
- NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
+ if (mtd->writesize > 512 || (busw & NAND_BUSWIDTH_16))
+ chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+ else
+ chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
- /* Check if chip is a not a samsung device. Do not clear the
- * options for chips which are not having an extended id.
+ /*
+ * Bad block marker is stored in the last page of each block
+ * on Samsung and Hynix MLC devices; stored in first two pages
+ * of each block on Micron devices with 2KiB pages and on
+ * SLC Samsung, Hynix, Toshiba and AMD/Spansion. All others scan
+ * only the first page.
*/
- if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
- chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+ if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ (*maf_id == NAND_MFR_SAMSUNG ||
+ *maf_id == NAND_MFR_HYNIX))
+ chip->options |= NAND_BBT_SCANLASTPAGE;
+ else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ (*maf_id == NAND_MFR_SAMSUNG ||
+ *maf_id == NAND_MFR_HYNIX ||
+ *maf_id == NAND_MFR_TOSHIBA ||
+ *maf_id == NAND_MFR_AMD)) ||
+ (mtd->writesize == 2048 &&
+ *maf_id == NAND_MFR_MICRON))
+ chip->options |= NAND_BBT_SCAN2NDPAGE;
+
+ /*
+ * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
+ */
+ if (!(busw & NAND_BUSWIDTH_16) &&
+ *maf_id == NAND_MFR_STMICRO &&
+ mtd->writesize == 2048) {
+ chip->options |= NAND_BBT_SCANBYTE1AND6;
+ chip->badblockpos = 0;
+ }
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
+ /* TODO onfi flash name */
MTDDEBUG (MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
- nand_manuf_ids[maf_idx].name, type->name);
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
+ nand_manuf_ids[maf_idx].name,
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+ chip->onfi_version ? chip->onfi_params.model : type->name);
+#else
+ type->name);
+#endif
return type;
}
chip->ecc.write_page_raw = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
chip->ecc.write_oob = nand_write_oob_std;
- chip->ecc.size = 256;
+ if (!chip->ecc.size)
+ chip->ecc.size = 256;
chip->ecc.bytes = 3;
break;
/* Fill in remaining MTD driver data */
mtd->type = MTD_NANDFLASH;
- mtd->flags = MTD_CAP_NANDFLASH;
+ mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
+ MTD_CAP_NANDFLASH;
mtd->erase = nand_erase;
mtd->point = NULL;
mtd->unpoint = NULL;
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
- chip->options |= NAND_BBT_SCANNED;
+ return 0;
- return 0;
+ /* Build bad block table */
+ return chip->scan_bbt(mtd);
}
/**
kfree(chip->bbt);
if (!(chip->options & NAND_OWN_BUFFERS))
kfree(chip->buffers);
+
+ /* Free bad block descriptor memory */
+ if (chip->badblock_pattern && chip->badblock_pattern->options
+ & NAND_BBT_DYNAMICSTRUCT)
+ kfree(chip->badblock_pattern);
}
/*
* linux/include/linux/mtd/nand.h
*
- * Copyright (c) 2000 David Woodhouse <dwmw2@infradead.org>
- * Steven J. Hill <sjhill@realitydiluted.com>
- * Thomas Gleixner <tglx@linutronix.de>
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ * Steven J. Hill <sjhill@realitydiluted.com>
+ * Thomas Gleixner <tglx@linutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
extern int nand_scan_tail(struct mtd_info *mtd);
/* Free resources held by the NAND device */
-extern void nand_release (struct mtd_info *mtd);
+extern void nand_release(struct mtd_info *mtd);
/* Internal helper for board drivers which need to override command function */
extern void nand_wait_ready(struct mtd_info *mtd);
-/* This constant declares the max. oobsize / page, which
+/*
+ * This constant declares the max. oobsize / page, which
* is supported now. If you add a chip with bigger oobsize/page
* adjust this accordingly.
*/
-#define NAND_MAX_OOBSIZE 218
-#define NAND_MAX_PAGESIZE 4096
+#define NAND_MAX_OOBSIZE 576
+#define NAND_MAX_PAGESIZE 8192
/*
* Constants for hardware specific CLE/ALE/NCE function
#define NAND_CMD_SEQIN 0x80
#define NAND_CMD_RNDIN 0x85
#define NAND_CMD_READID 0x90
-#define NAND_CMD_PARAM 0xec
#define NAND_CMD_ERASE2 0xd0
+#define NAND_CMD_PARAM 0xec
#define NAND_CMD_RESET 0xff
+#define NAND_CMD_LOCK 0x2a
+#define NAND_CMD_UNLOCK1 0x23
+#define NAND_CMD_UNLOCK2 0x24
+
/* Extended commands for large page devices */
#define NAND_CMD_READSTART 0x30
#define NAND_CMD_RNDOUTSTART 0xE0
#define NAND_GET_DEVICE 0x80
-/* Option constants for bizarre disfunctionality and real
-* features
-*/
+/*
+ * Option constants for bizarre disfunctionality and real
+ * features.
+ */
/* Chip can not auto increment pages */
#define NAND_NO_AUTOINCR 0x00000001
/* Buswitdh is 16 bit */
#define NAND_CACHEPRG 0x00000008
/* Chip has copy back function */
#define NAND_COPYBACK 0x00000010
-/* AND Chip which has 4 banks and a confusing page / block
- * assignment. See Renesas datasheet for further information */
+/*
+ * AND Chip which has 4 banks and a confusing page / block
+ * assignment. See Renesas datasheet for further information.
+ */
#define NAND_IS_AND 0x00000020
-/* Chip has a array of 4 pages which can be read without
- * additional ready /busy waits */
+/*
+ * Chip has a array of 4 pages which can be read without
+ * additional ready /busy waits.
+ */
#define NAND_4PAGE_ARRAY 0x00000040
-/* Chip requires that BBT is periodically rewritten to prevent
+/*
+ * Chip requires that BBT is periodically rewritten to prevent
* bits from adjacent blocks from 'leaking' in altering data.
- * This happens with the Renesas AG-AND chips, possibly others. */
+ * This happens with the Renesas AG-AND chips, possibly others.
+ */
#define BBT_AUTO_REFRESH 0x00000080
-/* Chip does not require ready check on read. True
+/*
+ * Chip does not require ready check on read. True
* for all large page devices, as they do not support
- * autoincrement.*/
+ * autoincrement.
+ */
#define NAND_NO_READRDY 0x00000100
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
+/* Device is one of 'new' xD cards that expose fake nand command set */
+#define NAND_BROKEN_XD 0x00000400
+
+/* Device behaves just like nand, but is readonly */
+#define NAND_ROM 0x00000800
/* Options valid for Samsung large page devices */
#define NAND_SAMSUNG_LP_OPTIONS \
#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR)
/* Non chip related options */
-/* Use a flash based bad block table. This option is passed to the
- * default bad block table function. */
+/*
+ * Use a flash based bad block table. OOB identifier is saved in OOB area.
+ * This option is passed to the default bad block table function.
+ */
#define NAND_USE_FLASH_BBT 0x00010000
/* This option skips the bbt scan during initialization. */
#define NAND_SKIP_BBTSCAN 0x00020000
-/* This option is defined if the board driver allocates its own buffers
- (e.g. because it needs them DMA-coherent */
+/*
+ * This option is defined if the board driver allocates its own buffers
+ * (e.g. because it needs them DMA-coherent).
+ */
#define NAND_OWN_BUFFERS 0x00040000
+/* Chip may not exist, so silence any errors in scan */
+#define NAND_SCAN_SILENT_NODEV 0x00080000
+/*
+ * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch
+ * the OOB area.
+ */
+#define NAND_USE_FLASH_BBT_NO_OOB 0x00800000
+/* Create an empty BBT with no vendor information if the BBT is available */
+#define NAND_CREATE_EMPTY_BBT 0x01000000
+
/* Options set by nand scan */
-/* bbt has already been read */
-#define NAND_BBT_SCANNED 0x40000000
/* Nand scan has allocated controller struct */
#define NAND_CONTROLLER_ALLOC 0x80000000
#define ONFI_CRC_BASE 0x4F4E
-
/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
* @active: the mtd device which holds the controller currently
- * @wq: wait queue to sleep on if a NAND operation is in progress
- * used instead of the per chip wait queue when a hw controller is available
+ * @wq: wait queue to sleep on if a NAND operation is in
+ * progress used instead of the per chip wait queue
+ * when a hw controller is available.
*/
struct nand_hw_control {
/* XXX U-BOOT XXX */
* @prepad: padding information for syndrome based ecc generators
* @postpad: padding information for syndrome based ecc generators
* @layout: ECC layout control struct pointer
- * @priv: pointer to private ecc control data
+ * @priv: pointer to private ecc control data
* @hwctl: function to control hardware ecc generator. Must only
* be provided if an hardware ECC is available
* @calculate: function for ecc calculation or readback from ecc hardware
* @correct: function for ecc correction, matching to ecc generator (sw/hw)
* @read_page_raw: function to read a raw page without ECC
* @write_page_raw: function to write a raw page without ECC
- * @read_page: function to read a page according to the ecc generator requirements
- * @write_page: function to write a page according to the ecc generator requirements
+ * @read_page: function to read a page according to the ecc generator
+ * requirements.
+ * @read_subpage: function to read parts of the page covered by ECC.
+ * @write_page: function to write a page according to the ecc generator
+ * requirements.
* @read_oob: function to read chip OOB data
* @write_oob: function to write chip OOB data
*/
struct nand_ecc_ctrl {
- nand_ecc_modes_t mode;
- int steps;
- int size;
- int bytes;
- int total;
- int prepad;
- int postpad;
+ nand_ecc_modes_t mode;
+ int steps;
+ int size;
+ int bytes;
+ int total;
+ int prepad;
+ int postpad;
struct nand_ecclayout *layout;
- void *priv;
- void (*hwctl)(struct mtd_info *mtd, int mode);
- int (*calculate)(struct mtd_info *mtd,
- const uint8_t *dat,
- uint8_t *ecc_code);
- int (*correct)(struct mtd_info *mtd, uint8_t *dat,
- uint8_t *read_ecc,
- uint8_t *calc_ecc);
- int (*read_page_raw)(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int page);
- void (*write_page_raw)(struct mtd_info *mtd,
- struct nand_chip *chip,
- const uint8_t *buf);
- int (*read_page)(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int page);
- int (*read_subpage)(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint32_t offs, uint32_t len,
- uint8_t *buf);
- void (*write_page)(struct mtd_info *mtd,
- struct nand_chip *chip,
- const uint8_t *buf);
- int (*read_oob)(struct mtd_info *mtd,
- struct nand_chip *chip,
- int page,
- int sndcmd);
- int (*write_oob)(struct mtd_info *mtd,
- struct nand_chip *chip,
- int page);
+ void *priv;
+ void (*hwctl)(struct mtd_info *mtd, int mode);
+ int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
+ uint8_t *ecc_code);
+ int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
+ uint8_t *calc_ecc);
+ int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page);
+ void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf);
+ int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page);
+ int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offs, uint32_t len, uint8_t *buf);
+ void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf);
+ int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
+ int sndcmd);
+ int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
};
/**
/**
* struct nand_chip - NAND Private Flash Chip Data
- * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
- * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
+ * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the
+ * flash device
+ * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the
+ * flash device.
* @read_byte: [REPLACEABLE] read one byte from the chip
* @read_word: [REPLACEABLE] read one word from the chip
* @write_buf: [REPLACEABLE] write data from the buffer to the chip
* @read_buf: [REPLACEABLE] read data from the chip into the buffer
- * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data
+ * @verify_buf: [REPLACEABLE] verify buffer contents against the chip
+ * data.
* @select_chip: [REPLACEABLE] select chip nr
* @block_bad: [REPLACEABLE] check, if the block is bad
* @block_markbad: [REPLACEABLE] mark the block bad
- * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific funtion for controlling
+ * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling
* ALE/CLE/nCE. Also used to write command and address
- * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
- * If set to NULL no access to ready/busy is available and the ready/busy information
- * is read from the chip status register
- * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip
- * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready
+ * @init_size: [BOARDSPECIFIC] hardwarespecific function for setting
+ * mtd->oobsize, mtd->writesize and so on.
+ * @id_data contains the 8 bytes values of NAND_CMD_READID.
+ * Return with the bus width.
+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing
+ * device ready/busy line. If set to NULL no access to
+ * ready/busy is available and the ready/busy information
+ * is read from the chip status register.
+ * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing
+ * commands to the chip.
+ * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
+ * ready.
* @ecc: [BOARDSPECIFIC] ecc control ctructure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
* @ops: oob operation operands
- * @erase_cmd: [INTERN] erase command write function, selectable due to AND support
+ * @erase_cmd: [INTERN] erase command write function, selectable due
+ * to AND support.
* @scan_bbt: [REPLACEABLE] function to scan bad block table
- * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
- * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress
+ * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
+ * data from array to read regs (tR).
* @state: [INTERN] the current state of the NAND device
* @oob_poi: poison value buffer
- * @page_shift: [INTERN] number of address bits in a page (column address bits)
+ * @page_shift: [INTERN] number of address bits in a page (column
+ * address bits).
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
* @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
* @chip_shift: [INTERN] number of address bits in one chip
- * @datbuf: [INTERN] internal buffer for one page + oob
- * @oobbuf: [INTERN] oob buffer for one eraseblock
- * @oobdirty: [INTERN] indicates that oob_buf must be reinitialized
- * @data_poi: [INTERN] pointer to a data buffer
- * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
- * special functionality. See the defines for further explanation
- * @badblockpos: [INTERN] position of the bad block marker in the oob area
+ * @options: [BOARDSPECIFIC] various chip options. They can partly
+ * be set to inform nand_scan about special functionality.
+ * See the defines for further explanation.
+ * @badblockpos: [INTERN] position of the bad block marker in the oob
+ * area.
+ * @badblockbits: [INTERN] number of bits to left-shift the bad block
+ * number
* @cellinfo: [INTERN] MLC/multichip data from chip ident
* @numchips: [INTERN] number of physical chips
* @chipsize: [INTERN] the size of one chip for multichip arrays
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
- * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf
+ * @pagebuf: [INTERN] holds the pagenumber which is currently in
+ * data_buf.
* @subpagesize: [INTERN] holds the subpagesize
+ * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
+ * non 0 if ONFI supported.
+ * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
+ * supported, 0 otherwise.
* @ecclayout: [REPLACEABLE] the default ecc placement scheme
* @bbt: [INTERN] bad block table pointer
- * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup
+ * @bbt_td: [REPLACEABLE] bad block table descriptor for flash
+ * lookup.
* @bbt_md: [REPLACEABLE] bad block table mirror descriptor
- * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan
- * @controller: [REPLACEABLE] a pointer to a hardware controller structure
- * which is shared among multiple independend devices
+ * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
+ * bad block scan.
+ * @controller: [REPLACEABLE] a pointer to a hardware controller
+ * structure which is shared among multiple independend
+ * devices.
* @priv: [OPTIONAL] pointer to private chip date
- * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks
- * (determine if errors are correctable)
+ * @errstat: [OPTIONAL] hardware specific function to perform
+ * additional error status checks (determine if errors are
+ * correctable).
* @write_page: [REPLACEABLE] High-level page write function
*/
struct nand_chip {
- void __iomem *IO_ADDR_R;
- void __iomem *IO_ADDR_W;
-
- uint8_t (*read_byte)(struct mtd_info *mtd);
- u16 (*read_word)(struct mtd_info *mtd);
- void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
- void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
- int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
- void (*select_chip)(struct mtd_info *mtd, int chip);
- int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
- int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
- void (*cmd_ctrl)(struct mtd_info *mtd, int dat,
- unsigned int ctrl);
- int (*dev_ready)(struct mtd_info *mtd);
- void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
- int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
- void (*erase_cmd)(struct mtd_info *mtd, int page);
- int (*scan_bbt)(struct mtd_info *mtd);
- int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page);
- int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int page, int cached, int raw);
-
- int chip_delay;
- unsigned int options;
-
- int page_shift;
- int phys_erase_shift;
- int bbt_erase_shift;
- int chip_shift;
- int numchips;
- uint64_t chipsize;
- int pagemask;
- int pagebuf;
- int subpagesize;
- uint8_t cellinfo;
- int badblockpos;
- int onfi_version;
+ void __iomem *IO_ADDR_R;
+ void __iomem *IO_ADDR_W;
+
+ uint8_t (*read_byte)(struct mtd_info *mtd);
+ u16 (*read_word)(struct mtd_info *mtd);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+ int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+ int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ int (*init_size)(struct mtd_info *mtd, struct nand_chip *this,
+ u8 *id_data);
+ int (*dev_ready)(struct mtd_info *mtd);
+ void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
+ int page_addr);
+ int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
+ void (*erase_cmd)(struct mtd_info *mtd, int page);
+ int (*scan_bbt)(struct mtd_info *mtd);
+ int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
+ int status, int page);
+ int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int page, int cached, int raw);
+
+ int chip_delay;
+ unsigned int options;
+
+ int page_shift;
+ int phys_erase_shift;
+ int bbt_erase_shift;
+ int chip_shift;
+ int numchips;
+ uint64_t chipsize;
+ int pagemask;
+ int pagebuf;
+ int subpagesize;
+ uint8_t cellinfo;
+ int badblockpos;
+ int badblockbits;
+
+ int onfi_version;
#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
struct nand_onfi_params onfi_params;
#endif
- int state;
+ int state;
- uint8_t *oob_poi;
- struct nand_hw_control *controller;
- struct nand_ecclayout *ecclayout;
+ uint8_t *oob_poi;
+ struct nand_hw_control *controller;
+ struct nand_ecclayout *ecclayout;
struct nand_ecc_ctrl ecc;
struct nand_buffers *buffers;
-
struct nand_hw_control hwcontrol;
struct mtd_oob_ops ops;
- uint8_t *bbt;
- struct nand_bbt_descr *bbt_td;
- struct nand_bbt_descr *bbt_md;
+ uint8_t *bbt;
+ struct nand_bbt_descr *bbt_td;
+ struct nand_bbt_descr *bbt_md;
- struct nand_bbt_descr *badblock_pattern;
+ struct nand_bbt_descr *badblock_pattern;
- void *priv;
+ void *priv;
};
/*
*/
struct nand_manufacturers {
int id;
- char * name;
+ char *name;
};
extern const struct nand_flash_dev nand_flash_ids[];
extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt);
extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, uint8_t * buf);
+ size_t *retlen, uint8_t *buf);
/*
* Constants for oob configuration
* @priv: hardware controller specific settings
*/
struct platform_nand_chip {
- int nr_chips;
- int chip_offset;
- int nr_partitions;
- struct mtd_partition *partitions;
- struct nand_ecclayout *ecclayout;
- int chip_delay;
- unsigned int options;
- const char **part_probe_types;
- void *priv;
+ int nr_chips;
+ int chip_offset;
+ int nr_partitions;
+ struct mtd_partition *partitions;
+ struct nand_ecclayout *ecclayout;
+ int chip_delay;
+ unsigned int options;
+ const char **part_probe_types;
+ void *priv;
};
+/* Keep gcc happy */
+struct platform_device;
+
/**
* struct platform_nand_ctrl - controller level device structure
* @hwcontrol: platform specific hardware control structure
* All fields are optional and depend on the hardware driver requirements
*/
struct platform_nand_ctrl {
- void (*hwcontrol)(struct mtd_info *mtd, int cmd);
- int (*dev_ready)(struct mtd_info *mtd);
- void (*select_chip)(struct mtd_info *mtd, int chip);
- void (*cmd_ctrl)(struct mtd_info *mtd, int dat,
- unsigned int ctrl);
- void *priv;
+ void (*hwcontrol)(struct mtd_info *mtd, int cmd);
+ int (*dev_ready)(struct mtd_info *mtd);
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ void *priv;
};
/**
* @ctrl: controller level device structure
*/
struct platform_nand_data {
- struct platform_nand_chip chip;
- struct platform_nand_ctrl ctrl;
+ struct platform_nand_chip chip;
+ struct platform_nand_ctrl ctrl;
};
/* Some helpers to access the data structures */
projects / u-boot.git / commitdiff