Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate.
Convert tegra20_ source file and function names to tegra_, also.
Upcoming Tegra30 port will use common code/defines/names where possible.
Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
static int is_cpu_powered(void)
{
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0;
}
static void remove_cpu_io_clamps(void)
{
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
u32 reg;
/* Remove the clamps on the CPU I/O signals */
static void powerup_cpu(void)
{
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
u32 reg;
int timeout = IO_STABILIZATION_DELAY;
static void enable_cpu_power_rail(void)
{
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
u32 reg;
reg = readl(&pmc->pmc_cntrl);
static int do_enterrcm(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
puts("Entering RCM...\n");
udelay(50000);
SOBJS += lowlevel_init.o
COBJS-y += ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o
-COBJS-$(CONFIG_TEGRA20_LP0) += warmboot.o crypto.o warmboot_avp.o
+COBJS-$(CONFIG_TEGRA_LP0) += warmboot.o crypto.o warmboot_avp.o
COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
COBJS-$(CONFIG_TEGRA_PMU) += pmu.o
int tegra_get_chip_type(void)
{
struct apb_misc_gp_ctlr *gp;
- struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE;
+ struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
uint tegra_sku_id, rev;
/*
* APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
* Tegra30
*/
- gp = (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+ gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
tegra_sku_id = readl(&fuse->sku_info) & 0xff;
static void init_pmc_scratch(void)
{
- struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
u32 odmdata;
int i;
unsigned int query_sdram_size(void)
{
- struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
u32 reg;
reg = readl(&pmc->pmc_scratch20);
#endif /* CONFIG_DISPLAY_BOARDINFO */
static int uart_configs[] = {
-#if defined(CONFIG_TEGRA20_UARTA_UAA_UAB)
+#if defined(CONFIG_TEGRA_UARTA_UAA_UAB)
FUNCMUX_UART1_UAA_UAB,
-#elif defined(CONFIG_TEGRA20_UARTA_GPU)
+#elif defined(CONFIG_TEGRA_UARTA_GPU)
FUNCMUX_UART1_GPU,
-#elif defined(CONFIG_TEGRA20_UARTA_SDIO1)
+#elif defined(CONFIG_TEGRA_UARTA_SDIO1)
FUNCMUX_UART1_SDIO1,
#else
FUNCMUX_UART1_IRRX_IRTX,
{
int uart_ids = 0; /* bit mask of which UART ids to enable */
-#ifdef CONFIG_TEGRA20_ENABLE_UARTA
+#ifdef CONFIG_TEGRA_ENABLE_UARTA
uart_ids |= UARTA;
#endif
-#ifdef CONFIG_TEGRA20_ENABLE_UARTB
+#ifdef CONFIG_TEGRA_ENABLE_UARTB
uart_ids |= UARTB;
#endif
-#ifdef CONFIG_TEGRA20_ENABLE_UARTD
+#ifdef CONFIG_TEGRA_ENABLE_UARTD
uart_ids |= UARTD;
#endif
setup_uarts(uart_ids);
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_TEGRA_CLOCK_SCALING
-#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA20_LP0"
+#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA_LP0"
#endif
/*
u32 ram_code;
struct sdram_params sdram;
struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
struct apb_misc_gp_ctlr *gp =
- (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+ (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
struct emc_ctlr *emc = emc_get_controller(gd->fdt_blob);
union scratch2_reg scratch2;
union scratch4_reg scratch4;
{
u32 major_id;
struct apb_misc_gp_ctlr *gp =
- (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+ (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
major_id = (readl(&gp->hidrev) & HIDREV_MAJORPREV_MASK) >>
HIDREV_MAJORPREV_SHIFT;
static int ap20_is_odm_production_mode(void)
{
- struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE;
+ struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
if (!is_failure_analysis_mode(fuse) &&
is_odm_production_mode_fuse_set(fuse))
static int ap20_is_production_mode(void)
{
- struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE;
+ struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
if (get_major_version() == 0)
return 1;
{
u32 chip_id;
struct apb_misc_gp_ctlr *gp =
- (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+ (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
chip_id = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >>
HIDREV_CHIPID_SHIFT;
void wb_start(void)
{
struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
#define HALT_COP_EVENT_IRQ_1 (1 << 11)
#define HALT_COP_EVENT_FIQ_1 (1 << 9)
-/* Start up the tegra20 SOC */
-void tegra20_start(void);
-
/* This is the main entry into U-Boot, used by the Cortex-A9 */
extern void _start(void);
* MA 02111-1307 USA
*/
-#ifndef _TEGRA20_MMC_H_
-#define _TEGRA20_MMC_H_
+#ifndef _TEGRA_MMC_H_
+#define _TEGRA_MMC_H_
-int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
+int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
-#endif /* TEGRA20_MMC_H_ */
+#endif /* _TEGRA_MMC_H_ */
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
-struct tegra20_sysinfo {
+struct tegra_sysinfo {
char *board_string;
};
void invalidate_dcache(void);
-extern const struct tegra20_sysinfo sysinfo;
+extern const struct tegra_sysinfo sysinfo;
#endif
#define NV_PA_GPIO_BASE 0x6000D000
#define NV_PA_EVP_BASE 0x6000F000
#define NV_PA_APB_MISC_BASE 0x70000000
-#define TEGRA20_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800)
+#define NV_PA_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800)
#define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000)
#define NV_PA_APB_UARTB_BASE (NV_PA_APB_MISC_BASE + 0x6040)
#define NV_PA_APB_UARTC_BASE (NV_PA_APB_MISC_BASE + 0x6200)
#define NV_PA_APB_UARTD_BASE (NV_PA_APB_MISC_BASE + 0x6300)
#define NV_PA_APB_UARTE_BASE (NV_PA_APB_MISC_BASE + 0x6400)
-#define TEGRA20_NAND_BASE (NV_PA_APB_MISC_BASE + 0x8000)
-#define TEGRA20_SPI_BASE (NV_PA_APB_MISC_BASE + 0xC380)
-#define TEGRA20_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400)
-#define TEGRA20_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800)
+#define NV_PA_NAND_BASE (NV_PA_APB_MISC_BASE + 0x8000)
+#define NV_PA_SPI_BASE (NV_PA_APB_MISC_BASE + 0xC380)
+#define NV_PA_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400)
+#define NV_PA_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800)
#define NV_PA_CSITE_BASE 0x70040000
#define TEGRA_USB1_BASE 0xC5000000
#define TEGRA_USB3_BASE 0xC5008000
#define TEGRA_USB_ADDR_MASK 0xFFFFC000
-#define TEGRA20_SDRC_CS0 NV_PA_SDRAM_BASE
+#define NV_PA_SDRC_CS0 NV_PA_SDRAM_BASE
#define LOW_LEVEL_SRAM_STACK 0x4000FFFC
#define EARLY_AVP_STACK (NV_PA_SDRAM_BASE + 0x20000)
#define EARLY_CPU_STACK (EARLY_AVP_STACK - 4096)
};
#else /* __ASSEMBLY__ */
-#define PRM_RSTCTRL TEGRA20_PMC_BASE
+#define PRM_RSTCTRL NV_PA_PMC_BASE
#endif
#endif /* TEGRA20_H */
#ifndef __TEGRA_MMC_H_
#define __TEGRA_MMC_H_
-#define TEGRA20_SDMMC1_BASE 0xC8000000
-#define TEGRA20_SDMMC2_BASE 0xC8000200
-#define TEGRA20_SDMMC3_BASE 0xC8000400
-#define TEGRA20_SDMMC4_BASE 0xC8000600
+#define TEGRA_SDMMC1_BASE 0xC8000000
+#define TEGRA_SDMMC2_BASE 0xC8000200
+#define TEGRA_SDMMC3_BASE 0xC8000400
+#define TEGRA_SDMMC4_BASE 0xC8000600
#ifndef __ASSEMBLY__
-struct tegra20_mmc {
+struct tegra_mmc {
unsigned int sysad; /* _SYSTEM_ADDRESS_0 */
unsigned short blksize; /* _BLOCK_SIZE_BLOCK_COUNT_0 15:00 */
unsigned short blkcnt; /* _BLOCK_SIZE_BLOCK_COUNT_0 31:16 */
#define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE (1 << 1)
struct mmc_host {
- struct tegra20_mmc *reg;
+ struct tegra_mmc *reg;
unsigned int version; /* SDHCI spec. version */
unsigned int clock; /* Current clock (MHz) */
unsigned int base; /* Base address, SDMMC1/2/3/4 */
#define SPI_STAT_CUR_BLKCNT (1 << 15)
#define SPI_TIMEOUT 1000
-#define TEGRA20_SPI_MAX_FREQ 52000000
+#define TEGRA_SPI_MAX_FREQ 52000000
#endif /* _TEGRA_SPI_H_ */
/* Tegra20 timer functions */
-#ifndef _TEGRA20_TIMER_H
-#define _TEGRA20_TIMER_H
+#ifndef _TEGRA_TIMER_H
+#define _TEGRA_TIMER_H
/* returns the current monotonic timer value in microseconds */
unsigned long timer_get_us(void);
pin_mux_mmc();
/* init dev 0, SD slot, with 4-bit bus */
- tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
+ tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
return 0;
}
debug("board_mmc_init: init eMMC\n");
/* init dev 0, eMMC chip, with 4-bit bus */
/* The board has an 8-bit bus, but 8-bit doesn't work yet */
- tegra20_mmc_init(0, 4, -1, -1);
+ tegra_mmc_init(0, 4, -1, -1);
debug("board_mmc_init: init SD slot\n");
/* init dev 3, SD slot, with 4-bit bus */
- tegra20_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
+ tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
return 0;
}
pin_mux_mmc();
/* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */
- tegra20_mmc_init(0, 4, -1, GPIO_PP1);
+ tegra_mmc_init(0, 4, -1, GPIO_PP1);
/* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */
- tegra20_mmc_init(3, 4, -1, -1);
+ tegra_mmc_init(3, 4, -1, -1);
return 0;
}
DECLARE_GLOBAL_DATA_PTR;
-const struct tegra20_sysinfo sysinfo = {
- CONFIG_TEGRA20_BOARD_STRING
+const struct tegra_sysinfo sysinfo = {
+ CONFIG_TEGRA_BOARD_STRING
};
#ifndef CONFIG_SPL_BUILD
static void power_det_init(void)
{
#if defined(CONFIG_TEGRA20)
- struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
/* turn off power detects */
writel(0, &pmc->pmc_pwr_det_latch);
board_usb_init(gd->fdt_blob);
#endif
-#ifdef CONFIG_TEGRA20_LP0
+#ifdef CONFIG_TEGRA_LP0
/* save Sdram params to PMC 2, 4, and 24 for WB0 */
warmboot_save_sdram_params();
debug("board_mmc_init: init SD slot J26\n");
/* init dev 0, SD slot J26, with 4-bit bus */
/* The board has an 8-bit bus, but 8-bit doesn't work yet */
- tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
+ tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
debug("board_mmc_init: init SD slot J5\n");
/* init dev 2, SD slot J5, with 4-bit bus */
- tegra20_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
+ tegra_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
return 0;
}
debug("board_mmc_init: init eMMC\n");
/* init dev 0, eMMC chip, with 4-bit bus */
/* The board has an 8-bit bus, but 8-bit doesn't work yet */
- tegra20_mmc_init(0, 4, -1, -1);
+ tegra_mmc_init(0, 4, -1, -1);
debug("board_mmc_init: init SD slot\n");
/* init dev 1, SD slot, with 4-bit bus */
- tegra20_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
+ tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
return 0;
}
pin_mux_mmc();
/* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */
- tegra20_mmc_init(0, 8, -1, -1);
+ tegra_mmc_init(0, 8, -1, -1);
/* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */
- tegra20_mmc_init(1, 8, -1, -1);
+ tegra_mmc_init(1, 8, -1, -1);
return 0;
}
#include <asm/gpio.h>
enum {
- TEGRA20_CMD_INFO,
- TEGRA20_CMD_PORT,
- TEGRA20_CMD_OUTPUT,
- TEGRA20_CMD_INPUT,
+ TEGRA_CMD_INFO,
+ TEGRA_CMD_PORT,
+ TEGRA_CMD_OUTPUT,
+ TEGRA_CMD_INPUT,
};
static struct gpio_names {
return error;
}
-static int tegra20_i2c_write_data(u32 addr, u8 *data, u32 len)
+static int tegra_i2c_write_data(u32 addr, u8 *data, u32 len)
{
int error;
struct i2c_trans_info trans_info;
error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
if (error)
- debug("tegra20_i2c_write_data: Error (%d) !!!\n", error);
+ debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
return error;
}
-static int tegra20_i2c_read_data(u32 addr, u8 *data, u32 len)
+static int tegra_i2c_read_data(u32 addr, u8 *data, u32 len)
{
int error;
struct i2c_trans_info trans_info;
error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
if (error)
- debug("tegra20_i2c_read_data: Error (%d) !!!\n", error);
+ debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
return error;
}
debug("\n");
/* Shift 7-bit address over for lower-level i2c functions */
- rc = tegra20_i2c_write_data(chip << 1, buffer, len);
+ rc = tegra_i2c_write_data(chip << 1, buffer, len);
if (rc)
debug("i2c_write_data(): rc=%d\n", rc);
debug("inside i2c_read_data():\n");
/* Shift 7-bit address over for lower-level i2c functions */
- rc = tegra20_i2c_read_data(chip << 1, buffer, len);
+ rc = tegra_i2c_read_data(chip << 1, buffer, len);
if (rc) {
debug("i2c_read_data(): rc=%d\n", rc);
return rc;
LIB := $(obj)libinput.o
COBJS-$(CONFIG_I8042_KBD) += i8042.o
-COBJS-$(CONFIG_TEGRA20_KEYBOARD) += tegra-kbc.o
+COBJS-$(CONFIG_TEGRA_KEYBOARD) += tegra-kbc.o
ifdef CONFIG_PS2KBD
COBJS-y += keyboard.o pc_keyb.o
COBJS-$(CONFIG_PS2MULT) += ps2mult.o ps2ser.o
#include <asm/io.h>
#include <asm/arch/clk_rst.h>
#include <asm/arch/clock.h>
-#include "tegra_mmc.h"
+#include <asm/arch/tegra_mmc.h>
/* support 4 mmc hosts */
struct mmc mmc_dev[4];
* @param host Structure to fill in (base, reg, mmc_id)
* @param dev_index Device index (0-3)
*/
-static void tegra20_get_setup(struct mmc_host *host, int dev_index)
+static void tegra_get_setup(struct mmc_host *host, int dev_index)
{
- debug("tegra20_get_base_mmc: dev_index = %d\n", dev_index);
+ debug("tegra_get_setup: dev_index = %d\n", dev_index);
switch (dev_index) {
case 1:
- host->base = TEGRA20_SDMMC3_BASE;
+ host->base = TEGRA_SDMMC3_BASE;
host->mmc_id = PERIPH_ID_SDMMC3;
break;
case 2:
- host->base = TEGRA20_SDMMC2_BASE;
+ host->base = TEGRA_SDMMC2_BASE;
host->mmc_id = PERIPH_ID_SDMMC2;
break;
case 3:
- host->base = TEGRA20_SDMMC1_BASE;
+ host->base = TEGRA_SDMMC1_BASE;
host->mmc_id = PERIPH_ID_SDMMC1;
break;
case 0:
default:
- host->base = TEGRA20_SDMMC4_BASE;
+ host->base = TEGRA_SDMMC4_BASE;
host->mmc_id = PERIPH_ID_SDMMC4;
break;
}
- host->reg = (struct tegra20_mmc *)host->base;
+ host->reg = (struct tegra_mmc *)host->base;
}
static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
debug(" mmc_change_clock called\n");
/*
- * Change Tegra20 SDMMCx clock divisor here. Source is 216MHz,
+ * Change Tegra SDMMCx clock divisor here. Source is 216MHz,
* PLLP_OUT0
*/
if (clock == 0)
return 0;
}
-int tegra20_mmc_getcd(struct mmc *mmc)
+int tegra_mmc_getcd(struct mmc *mmc)
{
struct mmc_host *host = (struct mmc_host *)mmc->priv;
- debug("tegra20_mmc_getcd called\n");
+ debug("tegra_mmc_getcd called\n");
if (host->cd_gpio >= 0)
return !gpio_get_value(host->cd_gpio);
return 1;
}
-int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
+int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
{
struct mmc_host *host;
char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */
struct mmc *mmc;
- debug(" tegra20_mmc_init: index %d, bus width %d "
+ debug(" tegra_mmc_init: index %d, bus width %d "
"pwr_gpio %d cd_gpio %d\n",
dev_index, bus_width, pwr_gpio, cd_gpio);
host->clock = 0;
host->pwr_gpio = pwr_gpio;
host->cd_gpio = cd_gpio;
- tegra20_get_setup(host, dev_index);
+ tegra_get_setup(host, dev_index);
clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
mmc = &mmc_dev[dev_index];
- sprintf(mmc->name, "Tegra20 SD/MMC");
+ sprintf(mmc->name, "Tegra SD/MMC");
mmc->priv = host;
mmc->send_cmd = mmc_send_cmd;
mmc->set_ios = mmc_set_ios;
mmc->init = mmc_core_init;
- mmc->getcd = tegra20_mmc_getcd;
+ mmc->getcd = tegra_mmc_getcd;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
if (bus_width == 8)
* max freq is highest HS eMMC clock as per the SD/MMC spec
* (actually 52MHz)
* Both of these are the closest equivalents w/216MHz source
- * clock and Tegra20 SDMMC divisors.
+ * clock and Tegra SDMMC divisors.
*/
mmc->f_min = 375000;
mmc->f_max = 48000000;
return NULL;
}
- if (max_hz > TEGRA20_SPI_MAX_FREQ) {
+ if (max_hz > TEGRA_SPI_MAX_FREQ) {
printf("SPI error: unsupported frequency %d Hz. Max frequency"
- " is %d Hz\n", max_hz, TEGRA20_SPI_MAX_FREQ);
+ " is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ);
return NULL;
}
spi->slave.bus = bus;
spi->slave.cs = cs;
spi->freq = max_hz;
- spi->regs = (struct spi_tegra *)TEGRA20_SPI_BASE;
+ spi->regs = (struct spi_tegra *)NV_PA_SPI_BASE;
spi->mode = mode;
return &spi->slave;
/* High-level configuration options */
#define V_PROMPT "Tegra20 (Harmony) # "
-#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Harmony"
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Harmony"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD
+#define CONFIG_TEGRA_ENABLE_UARTD
/* UARTD: keyboard satellite board UART, default */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
-#ifdef CONFIG_TEGRA20_ENABLE_UARTA
+#ifdef CONFIG_TEGRA_ENABLE_UARTA
/* UARTA: debug board UART */
#define CONFIG_SYS_NS16550_COM2 NV_PA_APB_UARTA_BASE
#endif
#define CONFIG_CMD_NAND
#define CONFIG_TEGRA_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE TEGRA20_NAND_BASE
+#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE
/* Environment in NAND (which is 512M), aligned to start of last sector */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
#endif /* __CONFIG_H */
/* High-level configuration options */
#define V_PROMPT "Tegra20 (Medcom) # "
-#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Medcom"
+#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Medcom"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */
+#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#define CONFIG_BOARD_EARLY_INIT_F
"ext2load mmc 0 0x17000000 /boot/uImage;" \
"bootm"
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
#endif /* __CONFIG_H */
/* High-level configuration options */
#define V_PROMPT "Tegra20 (Paz00) MOD # "
-#define CONFIG_TEGRA20_BOARD_STRING "Compal Paz00"
+#define CONFIG_TEGRA_BOARD_STRING "Compal Paz00"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTA
+#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_PAZ00
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
#endif /* __CONFIG_H */
/* High-level configuration options */
#define V_PROMPT "Tegra20 (Plutux) # "
-#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Plutux"
+#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Plutux"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */
+#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#define CONFIG_BOARD_EARLY_INIT_F
"ext2load mmc 0 0x17000000 /boot/uImage;" \
"bootm"
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
#endif /* __CONFIG_H */
#include <asm/sizes.h>
/* LP0 suspend / resume */
-#define CONFIG_TEGRA20_LP0
+#define CONFIG_TEGRA_LP0
#define CONFIG_AES
#define CONFIG_TEGRA_PMU
#define CONFIG_TPS6586X_POWER
/* High-level configuration options */
#define V_PROMPT "Tegra20 (SeaBoard) # "
-#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Seaboard"
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD
+#define CONFIG_TEGRA_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
#define CONFIG_CMD_DHCP
/* Enable keyboard */
-#define CONFIG_TEGRA20_KEYBOARD
+#define CONFIG_TEGRA_KEYBOARD
#define CONFIG_KEYBOARD
-#undef TEGRA20_DEVICE_SETTINGS
-#define TEGRA20_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \
- "stdout=serial\0" \
- "stderr=serial\0"
+#undef TEGRA_DEVICE_SETTINGS
+#define TEGRA_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0"
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
/* Somewhat oddly, the NAND base address must be a config option */
-#define CONFIG_SYS_NAND_BASE TEGRA20_NAND_BASE
+#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE
#endif /* __CONFIG_H */
/* High-level configuration options */
#define V_PROMPT "Tegra20 (TEC) # "
-#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier"
+#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier"
#define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */
+#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_CMD_NAND
#define CONFIG_TEGRA_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE TEGRA20_NAND_BASE
+#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE
/* Environment in NAND, aligned to start of last sector */
#define CONFIG_ENV_IS_IN_NAND
"ext2load mmc 0 0x17000000 /boot/uImage;" \
"bootm"
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
#endif /* __CONFIG_H */
* MA 02111-1307 USA
*/
-#ifndef __TEGRA20_COMMON_POST_H
-#define __TEGRA20_COMMON_POST_H
+#ifndef __TEGRA_COMMON_POST_H
+#define __TEGRA_COMMON_POST_H
#ifdef CONFIG_BOOTCOMMAND
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
- TEGRA20_DEVICE_SETTINGS \
+ TEGRA_DEVICE_SETTINGS \
"fdt_load=0x01000000\0" \
"fdt_high=01100000\0" \
BOOTCMDS_COMMON
#ifdef CONFIG_GENERIC_MMC
#undef CONFIG_GENERIC_MMC
#endif
-#ifdef CONFIG_TEGRA20_MMC
-#undef CONFIG_TEGRA20_MMC
+#ifdef CONFIG_TEGRA_MMC
+#undef CONFIG_TEGRA_MMC
#endif
#ifdef CONFIG_CMD_MMC
#undef CONFIG_CMD_MMC
#endif /* CONFIG_SPL_BUILD */
-#endif /* __TEGRA20_COMMON_POST_H */
+#endif /* __TEGRA_COMMON_POST_H */
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
-#ifdef CONFIG_TEGRA20_LP0
+#ifdef CONFIG_TEGRA_LP0
#define TEGRA_LP0_ADDR 0x1C406000
#define TEGRA_LP0_SIZE 0x2000
#define TEGRA_LP0_VEC \
/* Environment information, boards can override if required */
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define TEGRA20_DEVICE_SETTINGS "stdin=serial\0" \
- "stdout=serial\0" \
- "stderr=serial\0"
+#define TEGRA_DEVICE_SETTINGS "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0"
#define CONFIG_LOADADDR 0x408000 /* def. location for kernel */
#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-#define CONFIG_SYS_MEMTEST_START (TEGRA20_SDRC_CS0 + 0x600000)
+#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
#define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 TEGRA20_SDRC_CS0
+#define PHYS_SDRAM_1 NV_PA_SDRC_CS0
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_TEXT_BASE 0x0010c000
/* High-level configuration options */
#define V_PROMPT "Tegra20 (TrimSlice) # "
-#define CONFIG_TEGRA20_BOARD_STRING "Compulab Trimslice"
+#define CONFIG_TEGRA_BOARD_STRING "Compulab Trimslice"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTA
-#define CONFIG_TEGRA20_UARTA_GPU
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_GPU
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_TRIMSLICE
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
#endif /* __CONFIG_H */
/* High-level configuration options */
#define V_PROMPT "Tegra20 (Ventana) # "
-#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Ventana"
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Ventana"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTD
+#define CONFIG_TEGRA_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_VENTANA
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
#endif /* __CONFIG_H */
/* High-level configuration options */
#define V_PROMPT "Tegra20 (Whistler) # "
-#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Whistler"
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA20_ENABLE_UARTA
-#define CONFIG_TEGRA20_UARTA_UAA_UAB
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_UAA_UAB
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra20-common-post.h"
+#include "tegra-common-post.h"
#endif /* __CONFIG_H */
projects / u-boot.git / commitdiff