spi: Use BIT macro

Used BIT macro like 1 << nr as BIT(nr) where nr is 0...n

Cc: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>

diff --git a/include/spi.h b/include/spi.h
index 82e72ab38b221a52cbd9ca5b08fc50fdcc218d5a..dbd0df89a72492fd4166a3cb6568c25012fe8580 100644 (file)
--- a/include/spi.h
+++ b/include/spi.h
@@ -11,26 +11,26 @@
 #define _SPI_H_
 
 /* SPI mode flags */
-#define        SPI_CPHA        0x01                    /* clock phase */
-#define        SPI_CPOL        0x02                    /* clock polarity */
+#define        SPI_CPHA        BIT(0)                  /* clock phase */
+#define        SPI_CPOL        BIT(1)                  /* clock polarity */
 #define        SPI_MODE_0      (0|0)                   /* (original MicroWire) */
 #define        SPI_MODE_1      (0|SPI_CPHA)
 #define        SPI_MODE_2      (SPI_CPOL|0)
 #define        SPI_MODE_3      (SPI_CPOL|SPI_CPHA)
-#define        SPI_CS_HIGH     0x04                    /* CS active high */
-#define        SPI_LSB_FIRST   0x08                    /* per-word bits-on-wire */
-#define        SPI_3WIRE       0x10                    /* SI/SO signals shared */
-#define        SPI_LOOP        0x20                    /* loopback mode */
-#define        SPI_SLAVE       0x40                    /* slave mode */
-#define        SPI_PREAMBLE    0x80                    /* Skip preamble bytes */
-#define SPI_TX_BYTE    0x100                   /* transmit with 1 wire byte */
-#define SPI_TX_QUAD    0x200                   /* transmit with 4 wires */
+#define        SPI_CS_HIGH     BIT(2)                  /* CS active high */
+#define        SPI_LSB_FIRST   BIT(3)                  /* per-word bits-on-wire */
+#define        SPI_3WIRE       BIT(4)                  /* SI/SO signals shared */
+#define        SPI_LOOP        BIT(5)                  /* loopback mode */
+#define        SPI_SLAVE       BIT(6)                  /* slave mode */
+#define        SPI_PREAMBLE    BIT(7)                  /* Skip preamble bytes */
+#define SPI_TX_BYTE    BIT(8)                  /* transmit with 1 wire byte */
+#define SPI_TX_QUAD    BIT(9)                  /* transmit with 4 wires */
 
 /* SPI mode_rx flags */
-#define SPI_RX_SLOW            (1 << 0)
-#define SPI_RX_FAST            (1 << 1)
-#define SPI_RX_DUAL            (1 << 2)
-#define SPI_RX_QUAD            (1 << 4)
+#define SPI_RX_SLOW            BIT(0)
+#define SPI_RX_FAST            BIT(1)
+#define SPI_RX_DUAL            BIT(2)
+#define SPI_RX_QUAD            BIT(4)
 
 /* SPI bus connection options - see enum spi_dual_flash */
 #define SPI_CONN_DUAL_SHARED           (1 << 0)
@@ -116,12 +116,12 @@ struct spi_slave {
        u8 option;
 
        u8 flags;
-#define SPI_XFER_BEGIN         0x01    /* Assert CS before transfer */
-#define SPI_XFER_END           0x02    /* Deassert CS after transfer */
+#define SPI_XFER_BEGIN         BIT(0)  /* Assert CS before transfer */
+#define SPI_XFER_END           BIT(1)  /* Deassert CS after transfer */
 #define SPI_XFER_ONCE          (SPI_XFER_BEGIN | SPI_XFER_END)
-#define SPI_XFER_MMAP          0x04    /* Memory Mapped start */
-#define SPI_XFER_MMAP_END      0x08    /* Memory Mapped End */
-#define SPI_XFER_U_PAGE                0x10
+#define SPI_XFER_MMAP          BIT(2)  /* Memory Mapped start */
+#define SPI_XFER_MMAP_END      BIT(3)  /* Memory Mapped End */
+#define SPI_XFER_U_PAGE                BIT(4)
 };
 
 /**