arm64: zynqmp: Use ethernet-phy as node name for ethernet phys

Ethernet phys based on devicetree specification should be using
ethernet-phy@ node name instead of pure phy@.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
index ae834bc2a692f27c37740020a5a71e8ac5e3cfca..6e5a0d2c5be6083880eea78ae4d7b8ab09340d85 100644 (file)
--- a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
@@ -58,7 +58,7 @@
        phy-handle = <&phy0>;
        phy-mode = "sgmii";
        is-internal-pcspma;
-       phy0: phy@0 { /* marwell m88e1512 */
+       phy0: ethernet-phy@0 { /* marwell m88e1512 */
                reg = <0>;
                reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
 /*             xlnx,phy-type = <PHY_TYPE_SGMII>; */

diff --git a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
index 65eeea1b26b61578ba99ca887401521f2611fc97..889491456aa41aafa5f4069fe0ac25fdf5ad78dc 100644 (file)
--- a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
@@ -89,7 +89,7 @@
        phy-handle = <&phy0>;
        phy-mode = "sgmii"; /* DTG generates this properly  1512 */
        phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
-       phy0: phy@0 { /* marwell m88e1512 - SGMII */
+       phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
                reg = <0>;
 /*             xlnx,phy-type = <PHY_TYPE_SGMII>; */
        };

diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
index f49da8162a018dda94e9e82b45be6948bed81897..04d5fc9f933fa938bb6ebb73518c63f74d2e56c9 100644 (file)
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
@@ -76,7 +76,7 @@
        phy-mode = "sgmii"; /* DTG generates this properly  1512 */
        is-internal-pcspma;
        /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
-       phy0: phy@0 {
+       phy0: ethernet-phy@0 {
                reg = <0>;
        };
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index 8824f5cc02729535f31428176fe5a02d273e0396..bb6a94eefb8fdfe5cdf62f15476204916e9a4506 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -75,7 +75,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@0 {
+       phy0: ethernet-phy@0 {
                reg = <0>;
        };
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index afa90a8a5b09df60fa4230c4ce64e5175898d2a8..b8cc5ed22e6178172d0dc58bdf7efff0678fbd49 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -85,7 +85,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@5 {
+       phy0: ethernet-phy@5 {
                reg = <5>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
index d6a010355bb88014699475ae952df5a2c1e51126..2ead8dd24d57a6327f1c1bdedefd0a0ecd3be72d 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
@@ -76,7 +76,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@0 { /* VSC8211 */
+       phy0: ethernet-phy@0 { /* VSC8211 */
                reg = <0>;
        };
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
index 0632b18ccf00c0c9d783e3b6b0db095bceac02e8..12c0173c55998e7fb6c4d3a38be45d7e19b4dafc 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -73,7 +73,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@0 {
+       phy0: ethernet-phy@0 {
                reg = <0>;
        };
 };

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 6e22871713139517ad5f7f1d2e659690233bd946..e2a49a61cd15a63638aa9394208d3a73015bb777 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -110,7 +110,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@21 {
+       phy0: ethernet-phy@21 {
                reg = <21>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
index af4d86882a5c30611b116abbaa8e4257efc40fbf..08a4887401cf078dda1f30f48c57be5a5978192d 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -16,7 +16,7 @@
 
 &gem3 {
        phy-handle = <&phyc>;
-       phyc: phy@c {
+       phyc: ethernet-phy@c {
                reg = <0xc>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index c7a3cdcf61df9fdbef05134766eddea8856b01c4..3e63765c6b47210d26060f9e8c6d94c586ab75d2 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -54,7 +54,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@c {
+       phy0: ethernet-phy@c {
                reg = <0xc>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index 7df16b047ceb01b595313dee316bc194eb94db51..8d8cabfcb280619649a3b3978fe7179623d121d0 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -55,7 +55,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@c {
+       phy0: ethernet-phy@c {
                reg = <0xc>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 9fd3953fb44bb1ff578128f7f518b0fc0cffbeb9..74d501df38ba5b1de12fbf65fb32c65465209152 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -110,7 +110,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@c {
+       phy0: ethernet-phy@c {
                reg = <0xc>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 2e28a3934fd307d39993d3aaf5a63a8e1f60c44b..d23e4ea156e59335731fb2cbcf6977c713978643 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -106,7 +106,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@c {
+       phy0: ethernet-phy@c {
                reg = <0xc>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;