configs: defconfig for Sipeed Maix in S-mode

Provide a defconfig that can be used to build U-Boot for the Maix boards
running upon OpenSBI.

Update the documentation.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>

diff --git a/board/sipeed/maix/MAINTAINERS b/board/sipeed/maix/MAINTAINERS
index e7bb9ec43303226d0b7d66a8b62c8c218cbdaa29..0778af7a552ec241ccd3313303db35d981a09f6d 100644 (file)
--- a/board/sipeed/maix/MAINTAINERS
+++ b/board/sipeed/maix/MAINTAINERS
@@ -4,7 +4,7 @@ S:      Maintained
 F:     arch/riscv/dts/k210.dtsi
 F:     arch/riscv/dts/k210-maix-bit.dts
 F:     board/sipeed/maix/
-F:     configs/sipeed_maix_bitm_defconfig
+F:     configs/sipeed_maix*_defconfig
 F:     doc/board/sipeed/
 F:     include/configs/sipeed-maix.h
 F:     include/dt-bindings/*/k210-sysctl.h

diff --git a/configs/sipeed_maix_smode_defconfig b/configs/sipeed_maix_smode_defconfig
new file mode 100644 (file)
index 0000000..2516bb7
--- /dev/null
+++ b/configs/sipeed_maix_smode_defconfig
@@ -0,0 +1,10 @@
+CONFIG_RISCV=y
+CONFIG_SYS_TEXT_BASE=0x80020000
+CONFIG_TARGET_SIPEED_MAIX=y
+CONFIG_ARCH_RV64I=y
+CONFIG_RISCV_SMODE=y
+CONFIG_STACK_SIZE=0x100000
+# CONFIG_NET is not set
+# CONFIG_INPUT is not set
+# CONFIG_DM_ETH is not set
+# CONFIG_EFI_UNICODE_CAPITALIZATION is not set

diff --git a/doc/board/sipeed/maix.rst b/doc/board/sipeed/maix.rst
index b1894f3a6fa06efb36a0c64403d2653b2de84545..efcde9aebf73c2af8bc52e917d332cb467a8f4ab 100644 (file)
--- a/doc/board/sipeed/maix.rst
+++ b/doc/board/sipeed/maix.rst
@@ -75,6 +75,49 @@ console shall be opened immediately. Boot output should look like the following:
     Err:   serial@38000000
     =>
 
+OpenSBI
+^^^^^^^
+
+OpenSBI is an open source supervisor execution environment implementing the
+RISC-V Supervisor Binary Interface Specification [1]. One of its features is
+to intercept run-time exceptions, e.g. for unaligned access or illegal
+instructions, and to emulate the failing instructions.
+
+The OpenSBI source can be downloaded via:
+
+.. code-block:: bash
+
+    git clone https://github.com/riscv/opensbi
+
+As OpenSBI will be loaded at 0x80000000 we have to adjust the U-Boot text base.
+Furthermore we have to enable building U-Boot for S-mode::
+
+    CONFIG_SYS_TEXT_BASE=0x80020000
+    CONFIG_RISCV_SMODE=y
+
+Both settings are contained in sipeed_maix_smode_defconfig so we can build
+U-Boot with:
+
+.. code-block:: bash
+
+    make sipeed_maix_smode_defconfig
+    make
+
+To build OpenSBI with U-Boot as a payload:
+
+.. code-block:: bash
+
+    cd opensbi
+    make \
+    PLATFORM=kendryte/k210 \
+    FW_PAYLOAD=y \
+    FW_PAYLOAD_OFFSET=0x20000 \
+    FW_PAYLOAD_PATH=<path to U-Boot>/u-boot-dtb.bin
+
+The value of FW_PAYLOAD_OFFSET must match CONFIG_SYS_TEXT_BASE - 0x80000000.
+
+The file to flash is build/platform/kendryte/k210/firmware/fw_payload.bin.
+
 Loading Images
 ^^^^^^^^^^^^^^
 
@@ -363,3 +406,9 @@ Address    Size      Description
                      interrupts)
 0x8801f000 0x1000    credits
 ========== ========= ===========
+
+Links
+-----
+
+[1] https://github.com/riscv/riscv-sbi-doc
+    RISC-V Supervisor Binary Interface Specification