ARM: uniphier: move SBC and Support Card init code to U-Boot proper

Initialize SBC and Support Card in U-Boot proper instead of SPL.

We may run different firmware (ex. ARM Trusted Firmware) before
U-Boot, and basic SoC initialization may be done there.  In that
case, SPL may not be used.

The motivation for preparing SBC and Support Card in SPL was to use
LED for early debugging, but this is not mandatory to boot SoCs.
With this commit, LED will be unavailable in SPL, but we can use a
debug serial instead.  So, this change will not be a big deal.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 7f1abd03dc981eb99ef8655237dd3126f2d30341..ab2c6dc99bea46c04d40e888ea4c05ac2a68a0ea 100644 (file)
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -7,7 +7,6 @@ ifdef CONFIG_SPL_BUILD
 obj-y += spl_board_init.o
 obj-y += memconf.o
 obj-y += bcu/
-obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/
 
 else
 
@@ -17,6 +16,9 @@ obj-y += board_init.o
 obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
 obj-y += reset.o
 
+obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/ micro-support-card.o
+obj-y += pinctrl-glue.o
+
 endif
 
 obj-y += boards.o
@@ -24,9 +26,7 @@ obj-y += soc_info.o
 obj-y += boot-mode/
 obj-y += clk/
 obj-y += dram/
-obj-y += pinctrl-glue.o
 
-obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
 obj-$(CONFIG_DEBUG_UART_UNIPHIER) += debug-uart/
 
 obj-$(CONFIG_CPU_V7) += arm32/

diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c
index d698dd59f1738204880175d76cea623c69253fcc..93330b05c76588f2110194dd1132e52fda9d446b 100644 (file)
--- a/arch/arm/mach-uniphier/board_init.c
+++ b/arch/arm/mach-uniphier/board_init.c
@@ -81,6 +81,7 @@ static void uniphier_ld20_misc_init(void)
 struct uniphier_initdata {
        enum uniphier_soc_id soc_id;
        bool nand_2cs;
+       void (*sbc_init)(void);
        void (*pll_init)(void);
        void (*clk_init)(void);
        void (*misc_init)(void);
@@ -91,6 +92,7 @@ struct uniphier_initdata uniphier_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_SLD3,
                .nand_2cs = true,
+               .sbc_init = uniphier_sbc_init_admulti,
                .pll_init = uniphier_sld3_pll_init,
                .clk_init = uniphier_ld4_clk_init,
        },
@@ -99,6 +101,7 @@ struct uniphier_initdata uniphier_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_LD4,
                .nand_2cs = true,
+               .sbc_init = uniphier_ld4_sbc_init,
                .pll_init = uniphier_ld4_pll_init,
                .clk_init = uniphier_ld4_clk_init,
        },
@@ -107,6 +110,7 @@ struct uniphier_initdata uniphier_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_PRO4,
                .nand_2cs = false,
+               .sbc_init = uniphier_sbc_init_savepin,
                .pll_init = uniphier_pro4_pll_init,
                .clk_init = uniphier_pro4_clk_init,
        },
@@ -115,6 +119,7 @@ struct uniphier_initdata uniphier_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_SLD8,
                .nand_2cs = true,
+               .sbc_init = uniphier_ld4_sbc_init,
                .pll_init = uniphier_ld4_pll_init,
                .clk_init = uniphier_ld4_clk_init,
        },
@@ -123,6 +128,7 @@ struct uniphier_initdata uniphier_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_PRO5,
                .nand_2cs = true,
+               .sbc_init = uniphier_sbc_init_savepin,
                .clk_init = uniphier_pro5_clk_init,
        },
 #endif
@@ -130,6 +136,7 @@ struct uniphier_initdata uniphier_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_PXS2,
                .nand_2cs = true,
+               .sbc_init = uniphier_pxs2_sbc_init,
                .clk_init = uniphier_pxs2_clk_init,
        },
 #endif
@@ -137,6 +144,7 @@ struct uniphier_initdata uniphier_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_LD6B,
                .nand_2cs = true,
+               .sbc_init = uniphier_pxs2_sbc_init,
                .clk_init = uniphier_pxs2_clk_init,
        },
 #endif
@@ -144,6 +152,7 @@ struct uniphier_initdata uniphier_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_LD11,
                .nand_2cs = false,
+               .sbc_init = uniphier_ld11_sbc_init,
                .pll_init = uniphier_ld11_pll_init,
                .clk_init = uniphier_ld11_clk_init,
                .misc_init = uniphier_ld11_misc_init,
@@ -153,6 +162,7 @@ struct uniphier_initdata uniphier_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_LD20,
                .nand_2cs = false,
+               .sbc_init = uniphier_ld11_sbc_init,
                .pll_init = uniphier_ld20_pll_init,
                .misc_init = uniphier_ld20_misc_init,
        },
@@ -187,6 +197,12 @@ int board_init(void)
                return -EINVAL;
        }
 
+       initdata->sbc_init();
+
+       support_card_init();
+
+       led_puts("U0");
+
        if (IS_ENABLED(CONFIG_NAND_DENALI)) {
                ret = uniphier_pin_init(initdata->nand_2cs ?
                                        "nand2cs_grp" : "nand_grp");

diff --git a/arch/arm/mach-uniphier/spl_board_init.c b/arch/arm/mach-uniphier/spl_board_init.c
index d1e1ea74bc13e5d16f099540e0633c4a1af82c44..f4e1cb9c66a663355ee19915244d563463c14d5e 100644 (file)
--- a/arch/arm/mach-uniphier/spl_board_init.c
+++ b/arch/arm/mach-uniphier/spl_board_init.c
@@ -17,7 +17,6 @@ struct uniphier_spl_initdata {
        enum uniphier_soc_id soc_id;
        void (*bcu_init)(const struct uniphier_board_data *bd);
        void (*early_clk_init)(void);
-       void (*sbc_init)(void);
        int (*dpll_init)(const struct uniphier_board_data *bd);
        int (*memconf_init)(const struct uniphier_board_data *bd);
        void (*dram_clk_init)(void);
@@ -30,7 +29,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
                .soc_id = SOC_UNIPHIER_SLD3,
                .bcu_init = uniphier_sld3_bcu_init,
                .early_clk_init = uniphier_sld3_early_clk_init,
-               .sbc_init = uniphier_sbc_init_admulti,
                .dpll_init = uniphier_sld3_dpll_init,
                .memconf_init = uniphier_memconf_3ch_no_disbit_init,
                .dram_clk_init = uniphier_sld3_dram_clk_init,
@@ -42,7 +40,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
                .soc_id = SOC_UNIPHIER_LD4,
                .bcu_init = uniphier_ld4_bcu_init,
                .early_clk_init = uniphier_sld3_early_clk_init,
-               .sbc_init = uniphier_ld4_sbc_init,
                .dpll_init = uniphier_ld4_dpll_init,
                .memconf_init = uniphier_memconf_2ch_init,
                .dram_clk_init = uniphier_sld3_dram_clk_init,
@@ -53,7 +50,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_PRO4,
                .early_clk_init = uniphier_sld3_early_clk_init,
-               .sbc_init = uniphier_sbc_init_savepin,
                .dpll_init = uniphier_pro4_dpll_init,
                .memconf_init = uniphier_memconf_2ch_init,
                .dram_clk_init = uniphier_sld3_dram_clk_init,
@@ -65,7 +61,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
                .soc_id = SOC_UNIPHIER_SLD8,
                .bcu_init = uniphier_ld4_bcu_init,
                .early_clk_init = uniphier_sld3_early_clk_init,
-               .sbc_init = uniphier_ld4_sbc_init,
                .dpll_init = uniphier_sld8_dpll_init,
                .memconf_init = uniphier_memconf_2ch_init,
                .dram_clk_init = uniphier_sld3_dram_clk_init,
@@ -76,7 +71,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_PRO5,
                .early_clk_init = uniphier_sld3_early_clk_init,
-               .sbc_init = uniphier_sbc_init_savepin,
                .dpll_init = uniphier_pro5_dpll_init,
                .memconf_init = uniphier_memconf_2ch_init,
                .dram_clk_init = uniphier_pro5_dram_clk_init,
@@ -87,7 +81,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_PXS2,
                .early_clk_init = uniphier_sld3_early_clk_init,
-               .sbc_init = uniphier_pxs2_sbc_init,
                .dpll_init = uniphier_pxs2_dpll_init,
                .memconf_init = uniphier_memconf_3ch_init,
                .dram_clk_init = uniphier_pxs2_dram_clk_init,
@@ -98,7 +91,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_LD6B,
                .early_clk_init = uniphier_sld3_early_clk_init,
-               .sbc_init = uniphier_pxs2_sbc_init,
                .dpll_init = uniphier_pxs2_dpll_init,
                .memconf_init = uniphier_memconf_3ch_init,
                .dram_clk_init = uniphier_pxs2_dram_clk_init,
@@ -109,7 +101,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_LD11,
                .early_clk_init = uniphier_ld11_early_clk_init,
-               .sbc_init = uniphier_ld11_sbc_init,
                .dpll_init = uniphier_ld11_dpll_init,
                .memconf_init = uniphier_memconf_2ch_init,
                .dram_clk_init = uniphier_ld11_dram_clk_init,
@@ -120,7 +111,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
        {
                .soc_id = SOC_UNIPHIER_LD20,
                .early_clk_init = uniphier_ld11_early_clk_init,
-               .sbc_init = uniphier_ld11_sbc_init,
                .dpll_init = uniphier_ld20_dpll_init,
                .memconf_init = uniphier_memconf_3ch_init,
                .dram_clk_init = uniphier_ld20_dram_clk_init,
@@ -165,45 +155,31 @@ void spl_board_init(void)
        if (initdata->bcu_init)
                initdata->bcu_init(bd);
 
-       initdata->sbc_init();
 
        initdata->early_clk_init();
 
-       support_card_init();
-
-       led_puts("L0");
 
 #ifdef CONFIG_SPL_SERIAL_SUPPORT
        preloader_console_init();
 #endif
 
-       led_puts("L1");
-
        ret = initdata->dpll_init(bd);
        if (ret) {
                pr_err("failed to init DPLL\n");
                hang();
        }
 
-       led_puts("L2");
-
        ret = initdata->memconf_init(bd);
        if (ret) {
                pr_err("failed to init MEMCONF\n");
                hang();
        }
 
-       led_puts("L3");
-
        initdata->dram_clk_init();
 
-       led_puts("L4");
-
        ret = initdata->umc_init(bd);
        if (ret) {
                pr_err("failed to init DRAM\n");
                hang();
        }
-
-       led_puts("L5");
 }