arm: dts: imx8mp-venice-gw74xx: update M2 gpio hogs

Update the M2 socket gpio hogs such that they are not active on boot by
flagging them as GPIO_ACTIVE_HIGH so that 'output-high' drives high.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

diff --git a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi
index 8a3b4b6c56285abba145f1df86f2a21c3ab5889b..d87211245265eb88906eb7a9d504ce3c89d9bad2 100644 (file)
--- a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi
@@ -86,21 +86,21 @@
 
        m2_dis2_hog {
                gpio-hog;
-               gpios = <0 GPIO_ACTIVE_LOW>;
+               gpios = <0 GPIO_ACTIVE_HIGH>;
                output-high;
                line-name = "m2_gdis#";
        };
 
        m2rst_hog {
                gpio-hog;
-               gpios = <6 GPIO_ACTIVE_LOW>;
+               gpios = <6 GPIO_ACTIVE_HIGH>;
                output-high;
                line-name = "m2_rst#";
        };
 
        m2_off_hog {
                gpio-hog;
-               gpios = <14 GPIO_ACTIVE_LOW>;
+               gpios = <14 GPIO_ACTIVE_HIGH>;
                output-high;
                line-name = "m2_off#";
        };
@@ -111,7 +111,7 @@
 
        m2_dis1_hog {
                gpio-hog;
-               gpios = <18 GPIO_ACTIVE_LOW>;
+               gpios = <18 GPIO_ACTIVE_HIGH>;
                output-high;
                line-name = "m2_wdis#";
        };