mpc512x: MPC5121ADS: Add NAND support

This patch adds NAND support to the MPC5121ADS board. Please
note that the image size increased since NAND support didn't
fit in the current image size (256k).

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Wolfgang Denk <wd@denx.de>

diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c
index 102e6ff8be98be935978e29221d2f04cc1f50c2f..ec74fd35d2d24d655ae7b84fc30609a0d8d11165 100644 (file)
--- a/board/freescale/mpc5121ads/mpc5121ads.c
+++ b/board/freescale/mpc5121ads/mpc5121ads.c
@@ -31,6 +31,9 @@
 #include <i2c.h>
 #endif
 
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
 extern int mpc5121_diu_init(void);
@@ -38,24 +41,48 @@ extern void ide_set_reset(int idereset);
 
 /* Clocks in use */
 #define SCCR1_CLOCKS_EN        (CLOCK_SCCR1_CFG_EN |                           \
-                        CLOCK_SCCR1_LPC_EN |                           \
-                        CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |       \
-                        CLOCK_SCCR1_PSCFIFO_EN |                       \
                         CLOCK_SCCR1_DDR_EN |                           \
                         CLOCK_SCCR1_FEC_EN |                           \
+                        CLOCK_SCCR1_LPC_EN |                           \
+                        CLOCK_SCCR1_NFC_EN |                           \
                         CLOCK_SCCR1_PATA_EN |                          \
                         CLOCK_SCCR1_PCI_EN |                           \
+                        CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |       \
+                        CLOCK_SCCR1_PSCFIFO_EN |                       \
                         CLOCK_SCCR1_TPR_EN)
 
-#define SCCR2_CLOCKS_EN        (CLOCK_SCCR2_MEM_EN |           \
-                        CLOCK_SCCR2_SPDIF_EN |         \
-                        CLOCK_SCCR2_DIU_EN |           \
-                        CLOCK_SCCR2_I2C_EN)
+#define SCCR2_CLOCKS_EN        (CLOCK_SCCR2_DIU_EN |           \
+                        CLOCK_SCCR2_I2C_EN |           \
+                        CLOCK_SCCR2_MEM_EN |           \
+                        CLOCK_SCCR2_SPDIF_EN)
 
 #define CSAW_START(start)      ((start) & 0xFFFF0000)
 #define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
 
 long int fixed_sdram(void);
+void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip);
+
+/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */
+extern int mpc5121_nfc_chip;
+
+/* Control chips select signal on MPC5121ADS board */
+void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+       unsigned char *csreg = (u8 *)CONFIG_SYS_CPLD_BASE + 0x09;
+       u8 v;
+
+       v = in_8(csreg);
+       v |= 0x0F;
+
+       if (chip >= 0) {
+               __mpc5121_nfc_select_chip(mtd, 0);
+               v &= ~(1 << mpc5121_nfc_chip);
+       } else {
+               __mpc5121_nfc_select_chip(mtd, -1);
+       }
+
+       out_8(csreg, v);
+}
 
 int board_early_init_f (void)
 {

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index dff7f1a4f12ce42a66c0a5c3305ab4ce9bd3b607..45a004eb2c2e72d440fa6d95f3892b0ec3bfaea3 100644 (file)
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -199,6 +199,26 @@
 
 #undef CONFIG_SYS_FLASH_CHECKSUM
 
+/*
+ * NAND FLASH
+ * drivers/mtd/nand/mpc5121_mpc.c (rev 2 silicon only)
+ */
+#define CONFIG_CMD_NAND
+#define CONFIG_NAND_MPC5121_NFC
+#define CONFIG_SYS_NAND_BASE            0x40000000
+
+#define CONFIG_SYS_MAX_NAND_DEVICE      2
+#define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_NAND_SELECT_DEVICE  /* driver supports mutipl. chips */
+
+/*
+ * Configuration parameters for MPC5121 NAND driver
+ */
+#define CONFIG_FSL_NFC_WIDTH 1
+#define CONFIG_FSL_NFC_WRITE_SIZE 2048
+#define CONFIG_FSL_NFC_SPARE_SIZE 64
+#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
+
 /*
  * CPLD registers area is really only 32 bytes in size, but the smallest possible LP
  * window is 64KB
@@ -222,7 +242,7 @@
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE        TEXT_BASE               /* Start of monitor */
-#define CONFIG_SYS_MONITOR_LEN         (256 * 1024)            /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)            /* Reserve 512 kB for Mon */
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_MALLOC_LEN          (6 * 1024 * 1024)       /* Reserved for malloc */
 #else