]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
imx: ventana: add GW5903 support
authorTim Harvey <tharvey@gateworks.com>
Fri, 17 Mar 2017 14:32:21 +0000 (07:32 -0700)
committerStefano Babic <sbabic@denx.de>
Mon, 20 Mar 2017 18:10:50 +0000 (19:10 +0100)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
board/gateworks/gw_ventana/common.c
board/gateworks/gw_ventana/eeprom.c
board/gateworks/gw_ventana/gw_ventana.c
board/gateworks/gw_ventana/gw_ventana_spl.c
board/gateworks/gw_ventana/ventana_eeprom.h

index 017494f85a071f9f8147c3a5aac19963ac105d13..ec040604684e9d26ab801fd6892638a5914f606c 100644 (file)
@@ -51,6 +51,17 @@ static iomux_v3_cfg_t const gw5904_emmc_pads[] = {
        IOMUX_PADS(PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
        IOMUX_PADS(PAD_SD3_RST__SD3_RESET  | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 };
+/* 4-bit microSD on SD2 */
+static iomux_v3_cfg_t const gw5904_mmc_pads[] = {
+       IOMUX_PADS(PAD_SD2_CLK__SD2_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD2_CMD__SD2_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       /* CD */
+       IOMUX_PADS(PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
 /* 8-bit eMMC on SD2/NAND */
 static iomux_v3_cfg_t const gw560x_emmc_sd2_pads[] = {
        IOMUX_PADS(PAD_SD2_CLK__SD2_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
@@ -412,6 +423,39 @@ static iomux_v3_cfg_t const gw560x_gpio_pads[] = {
        IOMUX_PADS(PAD_DISP0_DAT5__GPIO4_IO26 | DIO_PAD_CFG),
 };
 
+static iomux_v3_cfg_t const gw5903_gpio_pads[] = {
+       /* BKLT_12VEN */
+       IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
+       /* EMMY_PDN# */
+       IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02 | DIO_PAD_CFG),
+       /* EMMY_CFG1# */
+       IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03 | DIO_PAD_CFG),
+       /* EMMY_CFG1# */
+       IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04 | DIO_PAD_CFG),
+       /* USBH1_PEN (EHCI) */
+       IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
+       /* USBH2_PEN (OTG) */
+       IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
+       /* USBDPC_PEN */
+       IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
+       /* TOUCH_RST */
+       IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG),
+       /* AUDIO_RST# */
+       IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG),
+       /* UART1_TEN# */
+       IOMUX_PADS(PAD_CSI0_DAT12__GPIO5_IO30 | DIO_PAD_CFG),
+       /* MX6_LOCLED# */
+       IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG),
+       /* LVDS_BKLEN # */
+       IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
+       /* RGMII_PDWN# */
+       IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | DIO_PAD_CFG),
+       /* TOUCH_IRQ# */
+       IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
+       /* TOUCH_RST# */
+       IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG),
+};
+
 static iomux_v3_cfg_t const gw5904_gpio_pads[] = {
        /* USB_HUBRST# */
        IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
@@ -688,6 +732,9 @@ struct dio_cfg gw560x_dio[] = {
        },
 };
 
+struct dio_cfg gw5903_dio[] = {
+};
+
 struct dio_cfg gw5904_dio[] = {
        {
                { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
@@ -951,6 +998,19 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
                .mmc_cd = IMX_GPIO_NR(7, 0),
        },
 
+       /* GW5903 */
+       {
+               .gpio_pads = gw5903_gpio_pads,
+               .num_pads = ARRAY_SIZE(gw5903_gpio_pads)/2,
+               .dio_cfg = gw5903_dio,
+               .dio_num = ARRAY_SIZE(gw5903_dio),
+               .leds = {
+                       IMX_GPIO_NR(6, 14),
+               },
+               .otgpwr_en = IMX_GPIO_NR(4, 15),
+               .mmc_cd = IMX_GPIO_NR(6, 11),
+       },
+
        /* GW5904 */
        {
                .gpio_pads = gw5904_gpio_pads,
@@ -1087,6 +1147,22 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info)
                gpio_request(IMX_GPIO_NR(4, 26), "12p0_en");
                gpio_direction_output(IMX_GPIO_NR(4, 26), 1);
                break;
+       case GW5903:
+               gpio_request(IMX_GPIO_NR(3, 31) , "usbh1-ehci_pwr");
+               gpio_direction_output(IMX_GPIO_NR(3, 31), 1);
+               gpio_request(IMX_GPIO_NR(4, 15) , "usbh2-otg_pwr");
+               gpio_direction_output(IMX_GPIO_NR(4, 15), 1);
+               gpio_request(IMX_GPIO_NR(4, 7) , "usbdpc_pwr");
+               gpio_direction_output(IMX_GPIO_NR(4, 15), 1);
+               gpio_request(IMX_GPIO_NR(1, 25) , "rgmii_en");
+               gpio_direction_output(IMX_GPIO_NR(1, 25), 1);
+               gpio_request(IMX_GPIO_NR(4, 6) , "touch_irq#");
+               gpio_direction_input(IMX_GPIO_NR(4, 6));
+               gpio_request(IMX_GPIO_NR(4, 8) , "touch_rst");
+               gpio_direction_output(IMX_GPIO_NR(4, 8), 1);
+               gpio_request(IMX_GPIO_NR(1, 7) , "bklt_12ven");
+               gpio_direction_output(IMX_GPIO_NR(1, 7), 1);
+               break;
        case GW5904:
                gpio_request(IMX_GPIO_NR(5, 11), "skt1_wdis#");
                gpio_direction_output(IMX_GPIO_NR(5, 11), 1);
@@ -1248,6 +1324,13 @@ void setup_pmic(void)
                        /* set SW3 (VDD_ARM) */
                        pmic_reg_write(p, LTC3676_DVB3A, 0x1f);
                        break;
+               case GW5903:
+                       /* mask PGOOD during SW4 transition */
+                       pmic_reg_write(p, LTC3676_DVB4B,
+                                      0x1f | LTC3676_PGOOD_MASK);
+                       /* set SW4 (VDD_SOC) */
+                       pmic_reg_write(p, LTC3676_DVB4A, 0x1f);
+                       break;
                default:
                        /* mask PGOOD during SW1 transition */
                        pmic_reg_write(p, LTC3676_DVB1B,
@@ -1299,6 +1382,21 @@ int board_mmc_init(bd_t *bis)
                usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
                usdhc_cfg[1].max_bus_width = 4;
                return fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
+       case GW5903:
+               /* usdhc3: 8-bit eMMC */
+               SETUP_IOMUX_PADS(gw5904_emmc_pads);
+               usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
+               usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+               usdhc_cfg[0].max_bus_width = 8;
+               ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+               if (ret)
+                       return ret;
+               /* usdhc2: 4-bit microSD */
+               SETUP_IOMUX_PADS(gw5904_mmc_pads);
+               usdhc_cfg[1].esdhc_base = USDHC2_BASE_ADDR;
+               usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+               usdhc_cfg[1].max_bus_width = 4;
+               return fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
        case GW5904:
                /* usdhc3: 8bit eMMC */
                SETUP_IOMUX_PADS(gw5904_emmc_pads);
@@ -1326,6 +1424,7 @@ int board_mmc_getcd(struct mmc *mmc)
                if (cfg->esdhc_base == USDHC2_BASE_ADDR)
                        return 1;
                break;
+       case GW5903:
        case GW5904:
                /* emmc is always present */
                if (cfg->esdhc_base == USDHC3_BASE_ADDR)
index cfd96b975a5de623ce40d582623d8353cf85abd8..2c07a84fffcb8e25201051513d0e887f1bc6a0d3 100644 (file)
@@ -98,6 +98,8 @@ read_eeprom(int bus, struct ventana_board_info *info)
                        type = GW560x;
                break;
        case '9':
+               if (info->model[4] == '0' && info->model[5] == '3')
+                       type = GW5903;
                if (info->model[4] == '0' && info->model[5] == '4')
                        type = GW5904;
                break;
index 5f25d8db4086810ef552c6c4d27ced4176162dd6..dc8cd883e904f278b977daf0bb2fa62c702e256e 100644 (file)
@@ -227,6 +227,18 @@ int board_phy_config(struct phy_device *phydev)
                phy_write(phydev, MDIO_DEVAD_NONE, 22, 0);
        }
 
+       /* TI DP83867 */
+       else if (phydev->phy_id == 0x2000a231) {
+               /* configure register 0x170 for ref CLKOUT */
+               phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x001f);
+               phy_write(phydev, MDIO_DEVAD_NONE, 14, 0x0170);
+               phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x401f);
+               val = phy_read(phydev, MDIO_DEVAD_NONE, 14);
+               val &= ~0x1f00;
+               val |= 0x0b00; /* chD tx clock*/
+               phy_write(phydev, MDIO_DEVAD_NONE, 14, val);
+       }
+
        if (phydev->drv->config)
                phydev->drv->config(phydev);
 
@@ -695,6 +707,7 @@ static const struct boot_mode board_boot_modes[] = {
        /* NAND: 64pages per block, 3 row addr cycles, 2 copies of FCB/DBBT */
        { "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) },
        { "emmc2", MAKE_CFGVAL(0x60, 0x48, 0x00, 0x00) }, /* GW5600 */
+       { "emmc3", MAKE_CFGVAL(0x60, 0x50, 0x00, 0x00) }, /* GW5903/GW5904 */
        { NULL, 0 },
 };
 #endif
index 136b5fcd7798f06cef92a09ee38e789622b36b17..6060b4421680d90789009105924b1e780044253c 100644 (file)
@@ -374,6 +374,25 @@ static struct mx6_mmdc_calibration mx6sdl_256x64_mmdc_calib = {
        .p1_mpwrdlctl = 0x383A3930,
 };
 
+static struct mx6_mmdc_calibration mx6sdl_256x64x2_mmdc_calib = {
+       /* write leveling calibration determine */
+       .p0_mpwldectrl0 = 0x001F003F,
+       .p0_mpwldectrl1 = 0x001F001F,
+       .p1_mpwldectrl0 = 0x001F004E,
+       .p1_mpwldectrl1 = 0x0059001F,
+       /* Read DQS Gating calibration */
+       .p0_mpdgctrl0   = 0x42220225,
+       .p0_mpdgctrl1   = 0x0213021F,
+       .p1_mpdgctrl0   = 0x022C0242,
+       .p1_mpdgctrl1   = 0x022C0244,
+       /* Read Calibration: DQS delay relative to DQ read access */
+       .p0_mprddlctl   = 0x474A4C4A,
+       .p1_mprddlctl   = 0x48494C45,
+       /* Write Calibration: DQ/DM delay relative to DQS write access */
+       .p0_mpwrdlctl   = 0x3F3F3F36,
+       .p1_mpwrdlctl   = 0x3F36363F,
+};
+
 static struct mx6_mmdc_calibration mx6dq_512x32_mmdc_calib = {
        /* write leveling calibration determine */
        .p0_mpwldectrl0 = 0x002A0025,
@@ -510,10 +529,25 @@ static void spl_dram_init(int width, int size_mb, int board_model)
                        calib = &mx6sdl_256x64_mmdc_calib;
                debug("4gB density\n");
        } else if (width == 64 && size_mb == 4096) {
-               mem = &mt41k512m16ha_125;
-               if (is_cpu_type(MXC_CPU_MX6Q))
-                       calib = &mx6dq_512x64_mmdc_calib;
-               debug("8gB density\n");
+               switch(board_model) {
+               case GW5903:
+                       /* 8xMT41K256M16 (4GiB) fly-by mirrored 2-chipsels */
+                       mem = &mt41k256m16ha_125;
+                       debug("4gB density\n");
+                       if (!is_cpu_type(MXC_CPU_MX6Q)) {
+                               calib = &mx6sdl_256x64x2_mmdc_calib;
+                               sysinfo.ncs = 2;
+                               sysinfo.cs_density = 18; /* CS0_END=71 */
+                               sysinfo.cs1_mirror = 1; /* mirror enabled */
+                       }
+                       break;
+               default:
+                       mem = &mt41k512m16ha_125;
+                       if (is_cpu_type(MXC_CPU_MX6Q))
+                               calib = &mx6dq_512x64_mmdc_calib;
+                       debug("8gB density\n");
+                       break;
+               }
        }
 
        if (!(mem && calib)) {
index b6daf9bcce1f3f8d48ac1588d8664344edef01b0..8a42d67ba190f8b0266ff3ee47492cb11c1325e5 100644 (file)
@@ -113,6 +113,7 @@ enum {
        GW552x,
        GW553x,
        GW560x,
+       GW5903,
        GW5904,
        GW_UNKNOWN,
        GW_BADCRC,