fix s3c2410_nand timing default values

The attached patch fixes wrong timing default values and adds the
possibility to specify board specific timing value in the board config file.

Signed-off-by: David Mueller <d.mueller@elsoft.ch>

diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c
index f70daefbfe126c5910dffd444697e79b00312773..27351fb7a05f347c0312e324ca5981ab4e89cb64 100644 (file)
--- a/drivers/mtd/nand/s3c2410_nand.c
+++ b/drivers/mtd/nand/s3c2410_nand.c
@@ -133,9 +133,15 @@ int board_nand_init(struct nand_chip *nand)
        writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
 
        /* initialize hardware */
-       twrph0 = 3;
-       twrph1 = 0;
-       tacls = 0;
+#if defined(CONFIG_S3C24XX_CUSTOM_NAND_TIMING)
+       tacls  = CONFIG_S3C24XX_TACLS;
+       twrph0 = CONFIG_S3C24XX_TWRPH0;
+       twrph1 =  CONFIG_S3C24XX_TWRPH1;
+#else
+       tacls = 4;
+       twrph0 = 8;
+       twrph1 = 8;
+#endif
 
        cfg = S3C2410_NFCONF_EN;
        cfg |= S3C2410_NFCONF_TACLS(tacls - 1);