armv8: ls2080aqds: Add support for SD boot

Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index cba0095e6a1d92449b46d5fc6ab7cb85a7cf4a1c..c4bb31156b42e3a1649f400be387151c7b7b208d 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -464,7 +464,7 @@ int cpu_eth_init(bd_t *bis)
 {
        int error = 0;
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
        error = fsl_mc_ldpaa_init(bis);
 #endif
 #ifdef CONFIG_FMAN_ENET
@@ -608,7 +608,7 @@ phys_size_t board_reserve_ram_top(phys_size_t ram_size)
 {
        phys_size_t ram_top = ram_size;
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
        /* The start address of MC reserved memory needs to be aligned. */
        ram_top -= mc_get_dram_block_size();
        ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
@@ -723,7 +723,7 @@ int dram_init_banksize(void)
        }
 #endif /* CONFIG_SYS_MEM_RESERVE_SECURE */
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
        /* Assign memory for MC */
 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
        if (gd->bd->bi_dram[2].size >=

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index 955e0b747854383a1de097f886d7aafae30fbf48..ef97556367c1b055120b573bbeafd43b1a5cf378 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -18,7 +18,7 @@ static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
 static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
 #endif
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 int xfi_dpmac[XFI8 + 1];
 int sgmii_dpmac[SGMII16 + 1];
 #endif
@@ -110,7 +110,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
                        debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
                else {
                        serdes_prtcl_map[lane_prtcl] = 1;
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
                        switch (lane_prtcl) {
                        case QSGMII_A:
                        case QSGMII_B:
@@ -141,7 +141,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
 
 void fsl_serdes_init(void)
 {
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
        int i , j;
 
        for (i = XFI1, j = 1; i <= XFI8; i++, j++)

diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c
index ecf4bd67ed3db08c2ede7ca23e34a22a072714b4..41417e9dc6914aed4b9a2f1b12b3f696702eec35 100644 (file)
--- a/board/freescale/ls2080a/ls2080a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -64,13 +64,13 @@ int board_eth_init(bd_t *bis)
        error = smc91111_initialize(0, CONFIG_SMC91111_BASE);
 #endif
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
        error = cpu_eth_init(bis);
 #endif
        return error;
 }
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 void fdt_fixup_board_enet(void *fdt)
 {
        int offset;
@@ -128,7 +128,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 
        fdt_fixup_memory_banks(blob, base, size, 2);
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
        fdt_fixup_board_enet(blob);
 #endif
 

diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index 79877d7774244e21d250029f4c1e6793592deb9f..62c8fac09c694f40e9fb066716680f5fd6d41495 100644 (file)
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -7,6 +7,7 @@ F:      include/configs/ls2080aqds.h
 F:     configs/ls2080aqds_defconfig
 F:     configs/ls2080aqds_nand_defconfig
 F:     configs/ls2080aqds_qspi_defconfig
+F:     configs/ls2080aqds_sdcard_defconfig
 
 LS2080A_SECURE_BOOT BOARD
 M:     Saksham Jain <saksham.jain@nxp.freescale.com>

diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README
index cad860eac2008fe93055a6caa006364b2486fe61..8e31e9e41e3e18744d93b6778924b10b9aa3a41b 100644 (file)
--- a/board/freescale/ls2080aqds/README
+++ b/board/freescale/ls2080aqds/README
@@ -102,6 +102,19 @@ DPAA2 DPL                  0x00D00000
 DPAA2 DPC                      0x00E00000
 Kernel.itb                     0x01000000
 
+Memory map for SD boot
+-------------------------
+Image                          Flash Offset    SD Card
+                                               Start Block No.
+RCW+PBI                                0x00000000      0x00008
+Boot firmware (U-Boot)         0x00100000      0x00800
+Boot firmware Environment      0x00300000      0x01800
+PPA firmware                   0x00400000      0x02000
+DPAA2 MC                       0x00A00000      0x05000
+DPAA2 DPL                      0x00D00000      0x06800
+DPAA2 DPC                      0x00E00000      0x07000
+Kernel.itb                     0x01000000      0x08000
+
 Environment Variables
 ---------------------
 - mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined

diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c
index 8c44aacdba36228baf94626a98c660776732e7cf..defcac52634fac2be3f595b935673df1b17560f5 100644 (file)
--- a/board/freescale/ls2080aqds/eth.c
+++ b/board/freescale/ls2080aqds/eth.c
@@ -23,7 +23,7 @@
 
 #define MC_BOOT_ENV_VAR "mcinitcmd"
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
  /* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks.
  *   Bank 1 -> Lanes A, B, C, D, E, F, G, H
  *   Bank 2 -> Lanes A,B, C, D, E, F, G, H
@@ -835,7 +835,7 @@ void ls2080a_handle_phy_interface_xsgmii(int i)
 int board_eth_init(bd_t *bis)
 {
        int error;
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
        struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
        int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
                                FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)

diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index 6da9c6cfe8313d4445d6153cb266f6f844c1fa98..f36fb9810bd2d7a365fd540a24a3560a63a73f90 100644 (file)
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -280,7 +280,7 @@ int arch_misc_init(void)
 }
 #endif
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 void fdt_fixup_board_enet(void *fdt)
 {
        int offset;
@@ -336,7 +336,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 
        fsl_fdt_fixup_dr_usb(blob, bd);
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
        fdt_fixup_board_enet(blob);
 #endif
 

diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig
new file mode 100644 (file)
index 0000000..a6d2f81
--- /dev/null
+++ b/configs/ls2080aqds_sdcard_defconfig
@@ -0,0 +1,56 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080AQDS=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_SPL=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_DATE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 43c5fef9b99547ba80b45efa1f588599a06a63e9..e311d0b149b01acbd9da9f0332256749646d9802 100644 (file)
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -208,9 +208,16 @@ unsigned long long get_qixis_addr(void);
                                "earlycon=uart8250,mmio,0x21c0500 " \
                                "ramdisk_size=0x2000000 default_hugepagesz=2m" \
                                " hugepagesz=2m hugepages=256"
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_BOOTCOMMAND     "mmc read 0x80200000 0x6800 0x800;"\
+                               " fsl_mc apply dpl 0x80200000 &&" \
+                               " mmc read $kernel_load $kernel_start" \
+                               " $kernel_size && bootm $kernel_load"
+#else
 #define CONFIG_BOOTCOMMAND     "fsl_mc apply dpl 0x580d00000 &&" \
                                " cp.b $kernel_start $kernel_load" \
                                " $kernel_size && bootm $kernel_load"
+#endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */

diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index e6ebec50ba846a60df0216d38a009fb1b2bd9c81..8a8ee9d351f9144b0459b1854e9c970989c5c340 100644 (file)
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -166,12 +166,14 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_LBMAP_DFLTBANK           0x00
 #define QIXIS_LBMAP_ALTBANK            0x04
 #define QIXIS_LBMAP_NAND               0x09
+#define QIXIS_LBMAP_SD                 0x00
 #define QIXIS_LBMAP_QSPI               0x0f
 #define QIXIS_RST_CTL_RESET            0x31
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE   0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START  0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE  0x08
 #define QIXIS_RCW_SRC_NAND             0x107
+#define QIXIS_RCW_SRC_SD               0x40
 #define QIXIS_RCW_SRC_QSPI             0x62
 #define        QIXIS_RST_FORCE_MEM             0x01
 
@@ -235,6 +237,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_PAD_TO              0x20000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (640 * 1024)
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET              0x200000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV         0
+#define CONFIG_ENV_SIZE                        0x20000
 #endif
 #else
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NOR0_CSPR_EXT
@@ -368,6 +375,22 @@ unsigned long get_board_ddr_clk(void);
        "esbc_validate 0x580740000;"            \
        "fsl_mc start mc 0x580a00000"           \
        " 0x580e00000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_EXTRA_ENV_SETTINGS              \
+       "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
+       "loadaddr=0x90100000\0"                 \
+       "kernel_addr=0x800\0"                \
+       "ramdisk_addr=0x800000\0"               \
+       "ramdisk_size=0x2000000\0"              \
+       "fdt_high=0xa0000000\0"                 \
+       "initrd_high=0xffffffffffffffff\0"      \
+       "kernel_start=0x8000\0"              \
+       "kernel_load=0xa0000000\0"              \
+       "kernel_size=0x14000\0"               \
+       "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
+       "mmc read 0x80100000 0x7000 0x800;" \
+       "fsl_mc start mc 0x80000000 0x80100000\0"       \
+       "mcmemsize=0x70000000 \0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
@@ -386,7 +409,7 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_SECURE_BOOT */
 
 
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 #define CONFIG_FSL_MEMAC
 #define        CONFIG_PHYLIB
 #define CONFIG_PHYLIB_10G