mmc: fsl_esdhc_imx: drop redundant clock settings

During mmc initialization, there are several calls to mmc_set_clock
and mmc_set_ios. When mmc_power_off, the mmc->clock will be set,
but the imx driver will use 400KHz. So the following calls
to mmc_set_ios will set the clock several times which is redundant
in fsl_esdhc_imx driver. So let's simplify to remove redundant
clock settings.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 43106dec7566d35b90d1ffcf8ab7b8e491590a24..67549036d41d044faf0635dacfb47014bbd726b6 100644 (file)
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -627,9 +627,6 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
        int sdhc_clk = priv->sdhc_clk;
        uint clk;
 
-       if (clock < mmc->cfg->f_min)
-               clock = mmc->cfg->f_min;
-
        while (sdhc_clk / (16 * pre_div * ddr_pre_div) > clock && pre_div < 256)
                pre_div *= 2;
 
@@ -958,6 +955,7 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 {
        struct fsl_esdhc *regs = priv->esdhc_regs;
        int ret __maybe_unused;
+       u32 clock;
 
 #ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
        /* Select to use peripheral clock */
@@ -966,8 +964,12 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
        esdhc_clock_control(priv, true);
 #endif
        /* Set the clock speed */
-       if (priv->clock != mmc->clock)
-               set_sysctl(priv, mmc, mmc->clock);
+       clock = mmc->clock;
+       if (clock < mmc->cfg->f_min)
+               clock = mmc->cfg->f_min;
+
+       if (priv->clock != clock)
+               set_sysctl(priv, mmc, clock);
 
 #ifdef MMC_SUPPORTS_TUNING
        if (mmc->clk_disable) {