]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
ARM: dts: rmobile: Add Renesas R8A77990 SoC support
authorYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Wed, 11 Apr 2018 09:37:41 +0000 (18:37 +0900)
committerMarek Vasut <marex@denx.de>
Fri, 1 Jun 2018 07:47:02 +0000 (09:47 +0200)
This patch adds basic support for the Renesas R-Car E3 (R8A77990) SoC:
  - PSCI
  - CPU (single)
  - Cache controller
  - Main clocks and controller
  - Interrupt controller
  - Timer
  - PMU
  - Reset controller
  - Product register
  - System controller
  - UART for console

Inspried by a patch by Takeshi Kihara in the BSP.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
arch/arm/dts/r8a77990.dtsi [new file with mode: 0644]

diff --git a/arch/arm/dts/r8a77990.dtsi b/arch/arm/dts/r8a77990.dtsi
new file mode 100644 (file)
index 0000000..310bfd9
--- /dev/null
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree Source for the r8a77990 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+       compatible = "renesas,r8a77990";
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               /* 1 core only at this point */
+               a53_0: cpu@0 {
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       reg = <0x0>;
+                       device_type = "cpu";
+                       power-domains = <&sysc 5>;
+                       next-level-cache = <&L2_CA53>;
+                       enable-method = "psci";
+               };
+
+               L2_CA53: cache-controller@0 {
+                       compatible = "cache";
+                       reg = <0>;
+                       power-domains = <&sysc 21>;
+                       cache-unified;
+                       cache-level = <2>;
+               };
+       };
+
+       extal_clk: extal {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               /* This value must be overridden by the board */
+               clock-frequency = <0>;
+       };
+
+       psci {
+               compatible = "arm,psci-0.2";
+               method = "smc";
+       };
+
+       soc: soc {
+               compatible = "simple-bus";
+               interrupt-parent = <&gic>;
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               gic: interrupt-controller@f1010000 {
+                       compatible = "arm,gic-400";
+                       #interrupt-cells = <3>;
+                       #address-cells = <0>;
+                       interrupt-controller;
+                       reg = <0x0 0xf1010000 0 0x1000>,
+                             <0x0 0xf1020000 0 0x20000>,
+                             <0x0 0xf1040000 0 0x20000>,
+                             <0x0 0xf1060000 0 0x20000>;
+                       interrupts = <GIC_PPI 9
+                                       (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+                       clocks = <&cpg CPG_MOD 408>;
+                       clock-names = "clk";
+                       power-domains = <&sysc 32>;
+                       resets = <&cpg 408>;
+               };
+
+               timer {
+                       compatible = "arm,armv8-timer";
+                       interrupts = <GIC_PPI 13
+                                       (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+                                    <GIC_PPI 14
+                                       (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+                                    <GIC_PPI 11
+                                       (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+                                    <GIC_PPI 10
+                                       (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+               };
+
+               pmu_a53 {
+                       compatible = "arm,cortex-a53-pmu";
+                       interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-affinity = <&a53_0>;
+               };
+
+               cpg: clock-controller@e6150000 {
+                       compatible = "renesas,r8a77990-cpg-mssr";
+                       reg = <0 0xe6150000 0 0x1000>;
+                       clocks = <&extal_clk>;
+                       clock-names = "extal";
+                       #clock-cells = <2>;
+                       #power-domain-cells = <0>;
+                       #reset-cells = <1>;
+               };
+
+               rst: reset-controller@e6160000 {
+                       compatible = "renesas,r8a77990-rst";
+                       reg = <0 0xe6160000 0 0x0200>;
+               };
+
+               prr: chipid@fff00044 {
+                       compatible = "renesas,prr";
+                       reg = <0 0xfff00044 0 4>;
+               };
+
+               sysc: system-controller@e6180000 {
+                       compatible = "renesas,r8a77990-sysc";
+                       reg = <0 0xe6180000 0 0x0400>;
+                       #power-domain-cells = <1>;
+               };
+
+               scif2: serial@e6e88000 {
+                       compatible = "renesas,scif-r8a77990",
+                                    "renesas,rcar-gen3-scif", "renesas,scif";
+                       reg = <0 0xe6e88000 0 64>;
+                       interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&cpg CPG_MOD 310>;
+                       clock-names = "fck";
+                       power-domains = <&sysc 32>;
+                       resets = <&cpg 310>;
+                       status = "disabled";
+               };
+       };
+};