source "drivers/pinctrl/nxp/Kconfig"
source "drivers/pinctrl/uniphier/Kconfig"
+source "drivers/pinctrl/exynos/Kconfig"
endmenu
obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/
obj-$(CONFIG_PIC32_PINCTRL) += pinctrl_pic32.o
+obj-$(CONFIG_PINCTRL_EXYNOS) += exynos/
--- /dev/null
+config PINCTRL_EXYNOS
+ bool
+
+config PINCTRL_EXYNOS7420
+ bool "Samsung Exynos7420 pinctrl driver"
+ depends on ARCH_EXYNOS && PINCTRL_FULL
+ select PINCTRL_EXYNOS
+ help
+ Support pin multiplexing and pin configuration control on
+ Samsung's Exynos7420 SoC.
--- /dev/null
+#
+# Copyright (C) 2016 Samsung Electronics
+# Thomas Abraham <thomas.ab@samsung.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_PINCTRL_EXYNOS) += pinctrl-exynos.o
+obj-$(CONFIG_PINCTRL_EXYNOS7420) += pinctrl-exynos7420.o
--- /dev/null
+/*
+ * Exynos pinctrl driver common code.
+ * Copyright (C) 2016 Samsung Electronics
+ * Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include "pinctrl-exynos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * exynos_pinctrl_setup_peri: setup pinctrl for a peripheral.
+ * conf: soc specific pin configuration data array
+ * num_conf: number of configurations in the conf array.
+ * base: base address of the pin controller.
+ */
+void exynos_pinctrl_setup_peri(struct exynos_pinctrl_config_data *conf,
+ unsigned int num_conf, unsigned long base)
+{
+ unsigned int idx, val;
+
+ for (idx = 0; idx < num_conf; idx++) {
+ val = readl(base + conf[idx].offset);
+ val &= ~(conf[idx].mask);
+ val |= conf[idx].value;
+ writel(val, base + conf[idx].offset);
+ }
+}
+
+/* given a pin-name, return the address of pin config registers */
+static unsigned long pin_to_bank_base(struct udevice *dev, const char *pin_name,
+ u32 *pin)
+{
+ struct exynos_pinctrl_priv *priv = dev_get_priv(dev);
+ const struct samsung_pin_ctrl *pin_ctrl = priv->pin_ctrl;
+ const struct samsung_pin_bank_data *bank_data = pin_ctrl->pin_banks;
+ u32 nr_banks = pin_ctrl->nr_banks, idx = 0;
+ char bank[10];
+
+ /*
+ * The format of the pin name is <bank name>-<pin_number>.
+ * Example: gpa0-4 (gpa0 is the bank name and 4 is the pin number.
+ */
+ while (pin_name[idx] != '-') {
+ bank[idx] = pin_name[idx];
+ idx++;
+ }
+ bank[idx] = '\0';
+ *pin = pin_name[++idx] - '0';
+
+ /* lookup the pin bank data using the pin bank name */
+ for (idx = 0; idx < nr_banks; idx++)
+ if (!strcmp(bank, bank_data[idx].name))
+ break;
+
+ return priv->base + bank_data[idx].offset;
+}
+
+/**
+ * exynos_pinctrl_set_state: configure a pin state.
+ * dev: the pinctrl device to be configured.
+ * config: the state to be configured.
+ */
+int exynos_pinctrl_set_state(struct udevice *dev, struct udevice *config)
+{
+ const void *fdt = gd->fdt_blob;
+ int node = config->of_offset;
+ unsigned int count, idx, pin_num, ret;
+ unsigned int pinfunc, pinpud, pindrv;
+ unsigned long reg, value;
+ const char *name;
+
+ /*
+ * refer to the following document for the pinctrl bindings
+ * linux/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+ */
+ count = fdt_count_strings(fdt, node, "samsung,pins");
+ if (count <= 0)
+ return -EINVAL;
+
+ pinfunc = fdtdec_get_int(fdt, node, "samsung,pin-function", -1);
+ pinpud = fdtdec_get_int(fdt, node, "samsung,pin-pud", -1);
+ pindrv = fdtdec_get_int(fdt, node, "samsung,pin-drv", -1);
+
+ for (idx = 0; idx < count; idx++) {
+ ret = fdt_get_string_index(fdt, node, "samsung,pins",
+ idx, &name);
+ if (ret < 0)
+ continue;
+ reg = pin_to_bank_base(dev, name, &pin_num);
+
+ if (pinfunc != -1) {
+ value = readl(reg + PIN_CON);
+ value &= ~(0xf << (pin_num << 2));
+ value |= (pinfunc << (pin_num << 2));
+ writel(value, reg + PIN_CON);
+ }
+
+ if (pinpud != -1) {
+ value = readl(reg + PIN_PUD);
+ value &= ~(0x3 << (pin_num << 1));
+ value |= (pinpud << (pin_num << 1));
+ writel(value, reg + PIN_PUD);
+ }
+
+ if (pindrv != -1) {
+ value = readl(reg + PIN_DRV);
+ value &= ~(0x3 << (pin_num << 1));
+ value |= (pindrv << (pin_num << 1));
+ writel(value, reg + PIN_DRV);
+ }
+ }
+
+ return 0;
+}
+
+int exynos_pinctrl_probe(struct udevice *dev)
+{
+ struct exynos_pinctrl_priv *priv;
+ fdt_addr_t base;
+
+ priv = dev_get_priv(dev);
+ if (!priv)
+ return -EINVAL;
+
+ base = dev_get_addr(dev);
+ if (base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->base = base;
+ priv->pin_ctrl = (struct samsung_pin_ctrl *)dev_get_driver_data(dev) +
+ dev->req_seq;
+
+ return 0;
+}
--- /dev/null
+/*
+ * Exynos pinctrl driver header.
+ * Copyright (C) 2016 Samsung Electronics
+ * Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PINCTRL_EXYNOS_H_
+#define __PINCTRL_EXYNOS__H_
+
+#define PIN_CON 0x00 /* Offset of pin function register */
+#define PIN_DAT 0x04 /* Offset of pin data register */
+#define PIN_PUD 0x08 /* Offset of pin pull up/down config register */
+#define PIN_DRV 0x0C /* Offset of pin drive strength register */
+
+/**
+ * struct samsung_pin_bank_data: represent a controller pin-bank data.
+ * @offset: starting offset of the pin-bank registers.
+ * @nr_pins: number of pins included in this bank.
+ * @name: name to be prefixed for each pin in this pin bank.
+ */
+struct samsung_pin_bank_data {
+ u32 offset;
+ u8 nr_pins;
+ const char *name;
+};
+
+#define EXYNOS_PIN_BANK(pins, reg, id) \
+ { \
+ .offset = reg, \
+ .nr_pins = pins, \
+ .name = id \
+ }
+
+/**
+ * struct samsung_pin_ctrl: represent a pin controller.
+ * @pin_banks: list of pin banks included in this controller.
+ * @nr_banks: number of pin banks.
+ */
+struct samsung_pin_ctrl {
+ const struct samsung_pin_bank_data *pin_banks;
+ u32 nr_banks;
+};
+
+/**
+ * struct exynos_pinctrl_priv: exynos pin controller driver private data
+ * @pin_ctrl: pin controller bank information.
+ * @base: base address of the pin controller instance.
+ * @num_banks: number of pin banks included in the pin controller.
+ */
+struct exynos_pinctrl_priv {
+ const struct samsung_pin_ctrl *pin_ctrl;
+ unsigned long base;
+ int num_banks;
+};
+
+/**
+ * struct exynos_pinctrl_config_data: configuration for a peripheral.
+ * @offset: offset of the config registers in the controller.
+ * @mask: value of the register to be masked with.
+ * @value: new value to be programmed.
+ */
+struct exynos_pinctrl_config_data {
+ const unsigned int offset;
+ const unsigned int mask;
+ const unsigned int value;
+};
+
+
+void exynos_pinctrl_setup_peri(struct exynos_pinctrl_config_data *conf,
+ unsigned int num_conf, unsigned long base);
+int exynos_pinctrl_set_state(struct udevice *dev,
+ struct udevice *config);
+int exynos_pinctrl_probe(struct udevice *dev);
+
+#endif /* __PINCTRL_EXYNOS_H_ */
--- /dev/null
+/*
+ * Exynos7420 pinctrl driver.
+ * Copyright (C) 2016 Samsung Electronics
+ * Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <dm/pinctrl.h>
+#include <dm/root.h>
+#include <fdtdec.h>
+#include <asm/arch/pinmux.h>
+#include "pinctrl-exynos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GPD1_OFFSET 0xc0
+
+static struct exynos_pinctrl_config_data serial2_conf[] = {
+ {
+ .offset = GPD1_OFFSET + PIN_CON,
+ .mask = 0x00ff0000,
+ .value = 0x00220000,
+ }, {
+ .offset = GPD1_OFFSET + PIN_PUD,
+ .mask = 0x00000f00,
+ .value = 0x00000f00,
+ },
+};
+
+static int exynos7420_pinctrl_request(struct udevice *dev, int peripheral,
+ int flags)
+{
+ struct exynos_pinctrl_priv *priv = dev_get_priv(dev);
+ unsigned long base = priv->base;
+
+ switch (PERIPH_ID_UART2) {
+ case PERIPH_ID_UART2:
+ exynos_pinctrl_setup_peri(serial2_conf,
+ ARRAY_SIZE(serial2_conf), base);
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct pinctrl_ops exynos7420_pinctrl_ops = {
+ .set_state = exynos_pinctrl_set_state,
+ .request = exynos7420_pinctrl_request,
+};
+
+/* pin banks of Exynos7420 pin-controller - BUS0 */
+static const struct samsung_pin_bank_data exynos7420_pin_banks0[] = {
+ EXYNOS_PIN_BANK(5, 0x000, "gpb0"),
+ EXYNOS_PIN_BANK(8, 0x020, "gpc0"),
+ EXYNOS_PIN_BANK(2, 0x040, "gpc1"),
+ EXYNOS_PIN_BANK(6, 0x060, "gpc2"),
+ EXYNOS_PIN_BANK(8, 0x080, "gpc3"),
+ EXYNOS_PIN_BANK(4, 0x0a0, "gpd0"),
+ EXYNOS_PIN_BANK(6, 0x0c0, "gpd1"),
+ EXYNOS_PIN_BANK(8, 0x0e0, "gpd2"),
+ EXYNOS_PIN_BANK(5, 0x100, "gpd4"),
+ EXYNOS_PIN_BANK(4, 0x120, "gpd5"),
+ EXYNOS_PIN_BANK(6, 0x140, "gpd6"),
+ EXYNOS_PIN_BANK(3, 0x160, "gpd7"),
+ EXYNOS_PIN_BANK(2, 0x180, "gpd8"),
+ EXYNOS_PIN_BANK(2, 0x1a0, "gpg0"),
+ EXYNOS_PIN_BANK(4, 0x1c0, "gpg3"),
+};
+
+/* pin banks of Exynos7420 pin-controller - FSYS0 */
+static const struct samsung_pin_bank_data exynos7420_pin_banks1[] = {
+ EXYNOS_PIN_BANK(7, 0x000, "gpr4"),
+};
+
+/* pin banks of Exynos7420 pin-controller - FSYS1 */
+static const struct samsung_pin_bank_data exynos7420_pin_banks2[] = {
+ EXYNOS_PIN_BANK(4, 0x000, "gpr0"),
+ EXYNOS_PIN_BANK(8, 0x020, "gpr1"),
+ EXYNOS_PIN_BANK(5, 0x040, "gpr2"),
+ EXYNOS_PIN_BANK(8, 0x060, "gpr3"),
+};
+
+const struct samsung_pin_ctrl exynos7420_pin_ctrl[] = {
+ {
+ /* pin-controller instance BUS0 data */
+ .pin_banks = exynos7420_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynos7420_pin_banks0),
+ }, {
+ /* pin-controller instance FSYS0 data */
+ .pin_banks = exynos7420_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynos7420_pin_banks1),
+ }, {
+ /* pin-controller instance FSYS1 data */
+ .pin_banks = exynos7420_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynos7420_pin_banks2),
+ },
+};
+
+static const struct udevice_id exynos7420_pinctrl_ids[] = {
+ { .compatible = "samsung,exynos7420-pinctrl",
+ .data = (ulong)exynos7420_pin_ctrl },
+ { }
+};
+
+U_BOOT_DRIVER(pinctrl_exynos7420) = {
+ .name = "pinctrl_exynos7420",
+ .id = UCLASS_PINCTRL,
+ .of_match = exynos7420_pinctrl_ids,
+ .priv_auto_alloc_size = sizeof(struct exynos_pinctrl_priv),
+ .ops = &exynos7420_pinctrl_ops,
+ .probe = exynos_pinctrl_probe,
+ .flags = DM_FLAG_PRE_RELOC
+};
projects / u-boot.git / commitdiff