board: qcs404-evb: Enable USB3 specific PMIC GPIO

For USB3 host controller to detect devices on the bus it is required to
enable a PMIC GPIO: usb_vbus_boost_pin. So enable that during board
specific initialization.

And since this PMIC GPIO parsing is quite u-boot specific, so add a
DT override to qcs404-evb-uboot.dtsi to represent usb_vbus_boost_pin.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

diff --git a/arch/arm/dts/qcs404-evb-uboot.dtsi b/arch/arm/dts/qcs404-evb-uboot.dtsi
index c18080a483404bbd4fa6a1d7eff231b297f7ecb4..c73d71e8c7c15896c6909f002d5c882f2078cc33 100644 (file)
--- a/arch/arm/dts/qcs404-evb-uboot.dtsi
+++ b/arch/arm/dts/qcs404-evb-uboot.dtsi
@@ -22,3 +22,9 @@
                };
        };
 };
+
+&pms405_gpios {
+       usb_vbus_boost_pin {
+               gpios = <&pms405_gpios 2 0>;
+       };
+};

diff --git a/board/qualcomm/qcs404-evb/qcs404-evb.c b/board/qualcomm/qcs404-evb/qcs404-evb.c
index f1e6e7f7eb5095c35e61eed3fc013ce6308903d3..249dca7e72f11a237f333d461beb13f5f1422159 100644 (file)
--- a/board/qualcomm/qcs404-evb/qcs404-evb.c
+++ b/board/qualcomm/qcs404-evb/qcs404-evb.c
@@ -11,6 +11,7 @@
 #include <env.h>
 #include <init.h>
 #include <asm/cache.h>
+#include <asm/gpio.h>
 #include <asm/global_data.h>
 #include <fdt_support.h>
 #include <asm/arch/dram.h>
@@ -24,6 +25,34 @@ int dram_init(void)
 
 int board_init(void)
 {
+       struct udevice *pmic_gpio;
+       struct gpio_desc usb_vbus_boost_pin;
+       int ret, node;
+
+       ret = uclass_get_device_by_name(UCLASS_GPIO,
+                                       "pms405_gpios@c000",
+                                       &pmic_gpio);
+       if (ret < 0) {
+               printf("Failed to find pms405_gpios@c000 node.\n");
+               return ret;
+       }
+
+       node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pmic_gpio),
+                                 "usb_vbus_boost_pin");
+       if (node < 0) {
+               printf("Failed to find usb_hub_reset_pm dt node.\n");
+               return node;
+       }
+       ret = gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0,
+                                        &usb_vbus_boost_pin, 0);
+       if (ret < 0) {
+               printf("Failed to request usb_hub_reset_pm gpio.\n");
+               return ret;
+       }
+
+       dm_gpio_set_dir_flags(&usb_vbus_boost_pin,
+                             GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+
        return 0;
 }