]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm: socfpga: Sync Cyclone V DK PLL configuration
authorMarek Vasut <marex@denx.de>
Tue, 30 Dec 2014 18:41:17 +0000 (19:41 +0100)
committerMarek Vasut <marex@denx.de>
Wed, 4 Mar 2015 22:07:04 +0000 (23:07 +0100)
Sync SoCFPGA Cyclone V development kit pinmux configuration with
Rocketboard U-Boot v2013.01.01-114-g9381569 (ACDS14.1_REL_GSRD_PR).

NOTE: This change is useless until we get proper SPL support, at
      which point this will likely need further rework.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@opensource.altera.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Pavel Machek <pavel@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Vince Bridgers <vbridger@opensource.altera.com>
board/altera/socfpga/pll_config.h

index f0f59a9519ecd835ee289dc7bf2f46870165dd9f..8130fa47444c8415b83845a3aca82de58d03d5f0 100644 (file)
@@ -16,9 +16,9 @@
 #define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT               (0)
 #define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT              (0)
 #define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT             (0)
-#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT          (3)
-#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT     (3)
-#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT       (12)
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT          (511)
+#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT     (511)
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT       (15)
 #define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK          (1)
 #define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK          (1)
 #define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK          (1)
@@ -36,7 +36,7 @@
 
 /* Peripheral PLL */
 #define CONFIG_HPS_PERPLLGRP_VCO_DENOM                 (1)
-#define CONFIG_HPS_PERPLLGRP_VCO_NUMER                 (79)
+#define CONFIG_HPS_PERPLLGRP_VCO_NUMER                 (39)
 /*
  * To tell where is the VCOs source:
  * 0 = EOSC1
  */
 #define CONFIG_HPS_PERPLLGRP_VCO_PSRC                  (0)
 #define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT              (3)
-#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT              (3)
-#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT            (1)
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT              (511)
+#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT            (511)
 #define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT       (4)
 #define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT            (4)
-#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT           (9)
+#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT           (511)
 #define CONFIG_HPS_PERPLLGRP_DIV_USBCLK                        (0)
-#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK               (0)
+#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK               (4)
 #define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK               (1)
 #define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK               (1)
 #define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK         (6249)
 #define CONFIG_HPS_PERPLLGRP_SRC_QSPI                  (1)
 
 /* SDRAM PLL */
-#ifdef CONFIG_SOCFPGA_ARRIA5
-/* Arria V SDRAM will run at 533MHz while Cyclone V still at 400MHz
- * This if..else... is not required if generated by tools */
 #define CONFIG_HPS_SDRPLLGRP_VCO_DENOM                 (2)
-#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER                 (127)
-#else
-#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM                 (0)
-#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER                 (31)
-#endif /* CONFIG_SOCFPGA_ARRIA5 */
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER                 (79)
 
 /*
  * To tell where is the VCOs source:
 
 /* Info for driver */
 #define CONFIG_HPS_CLK_OSC1_HZ                 (25000000)
-#define CONFIG_HPS_CLK_OSC2_HZ                 0
+#define CONFIG_HPS_CLK_OSC2_HZ                 (25000000)
 #define CONFIG_HPS_CLK_F2S_SDR_REF_HZ          0
 #define CONFIG_HPS_CLK_F2S_PER_REF_HZ          0
 #define CONFIG_HPS_CLK_MAINVCO_HZ              (1600000000)
 #define CONFIG_HPS_CLK_PERVCO_HZ               (1000000000)
-#ifdef CONFIG_SOCFPGA_ARRIA5
-/* The if..else... is not required if generated by tools */
-#define CONFIG_HPS_CLK_SDRVCO_HZ               (1066000000)
-#else
-#define CONFIG_HPS_CLK_SDRVCO_HZ               (800000000)
-#endif
+#define CONFIG_HPS_CLK_SDRVCO_HZ               (666666666)
 #define CONFIG_HPS_CLK_EMAC0_HZ                        (250000000)
 #define CONFIG_HPS_CLK_EMAC1_HZ                        (250000000)
 #define CONFIG_HPS_CLK_USBCLK_HZ               (200000000)