Since commit [1] A53 u-boot proper is broken. This is because nodes
marked as 'bootph-pre-ram' are not available at u-boot proper before
relocation.
To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'.
[1]
9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")
Reported-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
};
memory@80000000 {
- bootph-pre-ram;
+ bootph-all;
};
/* Keep the LEDs on by default to indicate life */
leds {
- bootph-pre-ram;
+ bootph-all;
led-0 {
default-state = "on";
- bootph-pre-ram;
+ bootph-all;
};
led-1 {
default-state = "on";
- bootph-pre-ram;
+ bootph-all;
};
led-2 {
default-state = "on";
- bootph-pre-ram;
+ bootph-all;
};
led-3 {
default-state = "on";
- bootph-pre-ram;
+ bootph-all;
};
led-4 {
default-state = "on";
- bootph-pre-ram;
+ bootph-all;
};
};
};
&cbass_main {
- bootph-pre-ram;
+ bootph-all;
};
&main_timer0 {
clock-frequency = <25000000>;
- bootph-pre-ram;
+ bootph-all;
};
&dmss {
- bootph-pre-ram;
+ bootph-all;
};
&secure_proxy_main {
- bootph-pre-ram;
+ bootph-all;
};
&dmsc {
- bootph-pre-ram;
+ bootph-all;
};
&k3_pds {
- bootph-pre-ram;
+ bootph-all;
};
&k3_clks {
- bootph-pre-ram;
+ bootph-all;
};
&k3_reset {
- bootph-pre-ram;
+ bootph-all;
};
&dmsc {
- bootph-pre-ram;
+ bootph-all;
k3_sysreset: sysreset-controller {
compatible = "ti,sci-sysreset";
- bootph-pre-ram;
+ bootph-all;
};
};
&wkup_conf {
- bootph-pre-ram;
+ bootph-all;
};
&chipid {
- bootph-pre-ram;
+ bootph-all;
};
&main_pmx0 {
- bootph-pre-ram;
+ bootph-all;
};
&main_uart0 {
- bootph-pre-ram;
+ bootph-all;
};
&console_pins_default {
- bootph-pre-ram;
+ bootph-all;
};
&cbass_mcu {
- bootph-pre-ram;
+ bootph-all;
};
&cbass_wakeup {
- bootph-pre-ram;
+ bootph-all;
};
&mcu_pmx0 {
- bootph-pre-ram;
+ bootph-all;
};
&main_i2c0 {
- bootph-pre-ram;
+ bootph-all;
};
&local_i2c_pins_default {
- bootph-pre-ram;
+ bootph-all;
};
&gpio0_pins_default {
- bootph-pre-ram;
+ bootph-all;
};
&main_gpio0 {
- bootph-pre-ram;
+ bootph-all;
};
&main_gpio1 {
- bootph-pre-ram;
+ bootph-all;
};
&sdhci0 {
/* EMMC */
- bootph-pre-ram;
+ bootph-all;
};
&emmc_pins_default {
- bootph-pre-ram;
+ bootph-all;
};
&sd_pins_default {
- bootph-pre-ram;
+ bootph-all;
/* Force to use SDCD card detect pin */
pinctrl-single,pins = <
AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
};
&tps65219 {
- bootph-pre-ram;
+ bootph-all;
};
&sdhci1 {
- bootph-pre-ram;
+ bootph-all;
};
#ifdef CONFIG_TARGET_AM625_A53_EVM