--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef _SDRAM_S10_H_
+#define _SDRAM_S10_H_
+
+unsigned long sdram_calculate_size(void);
+int sdram_mmr_init_full(unsigned int sdr_phy_reg);
+int sdram_calibration_full(void);
+
+#define DDR_TWR 15
+#define DDR_READ_LATENCY_DELAY 40
+#define DDR_ACTIVATE_FAWBANK 0x1
+
+/* ECC HMC registers */
+#define DDRIOCTRL 0x8
+#define DDRCALSTAT 0xc
+#define DRAMADDRWIDTH 0xe0
+#define ECCCTRL1 0x100
+#define ECCCTRL2 0x104
+#define ERRINTEN 0x110
+#define INTMODE 0x11c
+#define INTSTAT 0x120
+#define AUTOWB_CORRADDR 0x138
+#define ECC_REG2WRECCDATABUS 0x144
+#define ECC_DIAGON 0x150
+#define ECC_DECSTAT 0x154
+#define HPSINTFCSEL 0x210
+#define RSTHANDSHAKECTRL 0x214
+#define RSTHANDSHAKESTAT 0x218
+
+#define DDR_HMC_DDRIOCTRL_IOSIZE_MSK 0x00000003
+#define DDR_HMC_DDRCALSTAT_CAL_MSK BIT(0)
+#define DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK BIT(16)
+#define DDR_HMC_ECCCTL_CNT_RST_SET_MSK BIT(8)
+#define DDR_HMC_ECCCTL_ECC_EN_SET_MSK BIT(0)
+#define DDR_HMC_ECCCTL2_RMW_EN_SET_MSK BIT(8)
+#define DDR_HMC_ECCCTL2_AWB_EN_SET_MSK BIT(0)
+#define DDR_HMC_ECC_DIAGON_ECCDIAGON_EN_SET_MSK BIT(16)
+#define DDR_HMC_ECC_DIAGON_WRDIAGON_EN_SET_MSK BIT(0)
+#define DDR_HMC_ERRINTEN_SERRINTEN_EN_SET_MSK BIT(0)
+#define DDR_HMC_ERRINTEN_DERRINTEN_EN_SET_MSK BIT(1)
+#define DDR_HMC_INTSTAT_SERRPENA_SET_MSK BIT(0)
+#define DDR_HMC_INTSTAT_DERRPENA_SET_MSK BIT(1)
+#define DDR_HMC_INTSTAT_ADDRMTCFLG_SET_MSK BIT(16)
+#define DDR_HMC_INTMODE_INTMODE_SET_MSK BIT(0)
+#define DDR_HMC_RSTHANDSHAKE_MASK 0x000000ff
+#define DDR_HMC_CORE2SEQ_INT_REQ 0xF
+#define DDR_HMC_SEQ2CORE_INT_RESP_MASK BIT(3)
+#define DDR_HMC_HPSINTFCSEL_ENABLE_MASK 0x001f1f1f
+
+/* NOC DDR scheduler */
+#define DDR_SCH_ID_COREID 0
+#define DDR_SCH_ID_REVID 0x4
+#define DDR_SCH_DDRCONF 0x8
+#define DDR_SCH_DDRTIMING 0xc
+#define DDR_SCH_DDRMODE 0x10
+#define DDR_SCH_READ_LATENCY 0x14
+#define DDR_SCH_ACTIVATE 0x38
+#define DDR_SCH_DEVTODEV 0x3c
+#define DDR_SCH_DDR4TIMING 0x40
+
+#define DDR_SCH_DDRTIMING_ACTTOACT_OFF 0
+#define DDR_SCH_DDRTIMING_RDTOMISS_OFF 6
+#define DDR_SCH_DDRTIMING_WRTOMISS_OFF 12
+#define DDR_SCH_DDRTIMING_BURSTLEN_OFF 18
+#define DDR_SCH_DDRTIMING_RDTOWR_OFF 21
+#define DDR_SCH_DDRTIMING_WRTORD_OFF 26
+#define DDR_SCH_DDRTIMING_BWRATIO_OFF 31
+#define DDR_SCH_DDRMOD_BWRATIOEXTENDED_OFF 1
+#define DDR_SCH_ACTIVATE_RRD_OFF 0
+#define DDR_SCH_ACTIVATE_FAW_OFF 4
+#define DDR_SCH_ACTIVATE_FAWBANK_OFF 10
+#define DDR_SCH_DEVTODEV_BUSRDTORD_OFF 0
+#define DDR_SCH_DEVTODEV_BUSRDTOWR_OFF 2
+#define DDR_SCH_DEVTODEV_BUSWRTORD_OFF 4
+
+/* HMC MMR IO48 registers */
+#define CTRLCFG0 0x28
+#define CTRLCFG1 0x2c
+#define DRAMTIMING0 0x50
+#define CALTIMING0 0x7c
+#define CALTIMING1 0x80
+#define CALTIMING2 0x84
+#define CALTIMING3 0x88
+#define CALTIMING4 0x8c
+#define CALTIMING9 0xa0
+#define DRAMADDRW 0xa8
+#define DRAMSTS 0xec
+#define NIOSRESERVED0 0x110
+#define NIOSRESERVED1 0x114
+#define NIOSRESERVED2 0x118
+
+#define DRAMADDRW_CFG_COL_ADDR_WIDTH(x) \
+ (((x) >> 0) & 0x1F)
+#define DRAMADDRW_CFG_ROW_ADDR_WIDTH(x) \
+ (((x) >> 5) & 0x1F)
+#define DRAMADDRW_CFG_BANK_ADDR_WIDTH(x) \
+ (((x) >> 10) & 0xF)
+#define DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(x) \
+ (((x) >> 14) & 0x3)
+#define DRAMADDRW_CFG_CS_ADDR_WIDTH(x) \
+ (((x) >> 16) & 0x7)
+
+#define CTRLCFG0_CFG_MEMTYPE(x) \
+ (((x) >> 0) & 0xF)
+#define CTRLCFG0_CFG_DIMM_TYPE(x) \
+ (((x) >> 4) & 0x7)
+#define CTRLCFG0_CFG_AC_POS(x) \
+ (((x) >> 7) & 0x3)
+#define CTRLCFG0_CFG_CTRL_BURST_LEN(x) \
+ (((x) >> 9) & 0x1F)
+
+#define CTRLCFG1_CFG_DBC3_BURST_LEN(x) \
+ (((x) >> 0) & 0x1F)
+#define CTRLCFG1_CFG_ADDR_ORDER(x) \
+ (((x) >> 5) & 0x3)
+#define CTRLCFG1_CFG_CTRL_EN_ECC(x) \
+ (((x) >> 7) & 0x1)
+
+#define DRAMTIMING0_CFG_TCL(x) \
+ (((x) >> 0) & 0x7F)
+
+#define CALTIMING0_CFG_ACT_TO_RDWR(x) \
+ (((x) >> 0) & 0x3F)
+#define CALTIMING0_CFG_ACT_TO_PCH(x) \
+ (((x) >> 6) & 0x3F)
+#define CALTIMING0_CFG_ACT_TO_ACT(x) \
+ (((x) >> 12) & 0x3F)
+#define CALTIMING0_CFG_ACT_TO_ACT_DB(x) \
+ (((x) >> 18) & 0x3F)
+
+#define CALTIMING1_CFG_RD_TO_RD(x) \
+ (((x) >> 0) & 0x3F)
+#define CALTIMING1_CFG_RD_TO_RD_DC(x) \
+ (((x) >> 6) & 0x3F)
+#define CALTIMING1_CFG_RD_TO_RD_DB(x) \
+ (((x) >> 12) & 0x3F)
+#define CALTIMING1_CFG_RD_TO_WR(x) \
+ (((x) >> 18) & 0x3F)
+#define CALTIMING1_CFG_RD_TO_WR_DC(x) \
+ (((x) >> 24) & 0x3F)
+
+#define CALTIMING2_CFG_RD_TO_WR_DB(x) \
+ (((x) >> 0) & 0x3F)
+#define CALTIMING2_CFG_RD_TO_WR_PCH(x) \
+ (((x) >> 6) & 0x3F)
+#define CALTIMING2_CFG_RD_AP_TO_VALID(x) \
+ (((x) >> 12) & 0x3F)
+#define CALTIMING2_CFG_WR_TO_WR(x) \
+ (((x) >> 18) & 0x3F)
+#define CALTIMING2_CFG_WR_TO_WR_DC(x) \
+ (((x) >> 24) & 0x3F)
+
+#define CALTIMING3_CFG_WR_TO_WR_DB(x) \
+ (((x) >> 0) & 0x3F)
+#define CALTIMING3_CFG_WR_TO_RD(x) \
+ (((x) >> 6) & 0x3F)
+#define CALTIMING3_CFG_WR_TO_RD_DC(x) \
+ (((x) >> 12) & 0x3F)
+#define CALTIMING3_CFG_WR_TO_RD_DB(x) \
+ (((x) >> 18) & 0x3F)
+#define CALTIMING3_CFG_WR_TO_PCH(x) \
+ (((x) >> 24) & 0x3F)
+
+#define CALTIMING4_CFG_WR_AP_TO_VALID(x) \
+ (((x) >> 0) & 0x3F)
+#define CALTIMING4_CFG_PCH_TO_VALID(x) \
+ (((x) >> 6) & 0x3F)
+#define CALTIMING4_CFG_PCH_ALL_TO_VALID(x) \
+ (((x) >> 12) & 0x3F)
+#define CALTIMING4_CFG_ARF_TO_VALID(x) \
+ (((x) >> 18) & 0xFF)
+#define CALTIMING4_CFG_PDN_TO_VALID(x) \
+ (((x) >> 26) & 0x3F)
+
+#define CALTIMING9_CFG_4_ACT_TO_ACT(x) \
+ (((x) >> 0) & 0xFF)
+
+#endif /* _SDRAM_S10_H_ */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <wait_bit.h>
+#include <asm/arch/firewall_s10.h>
+#include <asm/arch/sdram_s10.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/reset_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_system_manager *sysmgr_regs =
+ (void *)SOCFPGA_SYSMGR_ADDRESS;
+
+#define DDR_CONFIG(A, B, C, R) (((A) << 24) | ((B) << 16) | ((C) << 8) | (R))
+
+/* The followring are the supported configurations */
+u32 ddr_config[] = {
+ /* DDR_CONFIG(Address order,Bank,Column,Row) */
+ /* List for DDR3 or LPDDR3 (pinout order > chip, row, bank, column) */
+ DDR_CONFIG(0, 3, 10, 12),
+ DDR_CONFIG(0, 3, 9, 13),
+ DDR_CONFIG(0, 3, 10, 13),
+ DDR_CONFIG(0, 3, 9, 14),
+ DDR_CONFIG(0, 3, 10, 14),
+ DDR_CONFIG(0, 3, 10, 15),
+ DDR_CONFIG(0, 3, 11, 14),
+ DDR_CONFIG(0, 3, 11, 15),
+ DDR_CONFIG(0, 3, 10, 16),
+ DDR_CONFIG(0, 3, 11, 16),
+ DDR_CONFIG(0, 3, 12, 15), /* 0xa */
+ /* List for DDR4 only (pinout order > chip, bank, row, column) */
+ DDR_CONFIG(1, 3, 10, 14),
+ DDR_CONFIG(1, 4, 10, 14),
+ DDR_CONFIG(1, 3, 10, 15),
+ DDR_CONFIG(1, 4, 10, 15),
+ DDR_CONFIG(1, 3, 10, 16),
+ DDR_CONFIG(1, 4, 10, 16),
+ DDR_CONFIG(1, 3, 10, 17),
+ DDR_CONFIG(1, 4, 10, 17),
+};
+
+static u32 hmc_readl(u32 reg)
+{
+ return readl(((void __iomem *)SOCFPGA_HMC_MMR_IO48_ADDRESS + (reg)));
+}
+
+static u32 hmc_ecc_readl(u32 reg)
+{
+ return readl((void __iomem *)SOCFPGA_SDR_ADDRESS + (reg));
+}
+
+static u32 hmc_ecc_writel(u32 data, u32 reg)
+{
+ return writel(data, (void __iomem *)SOCFPGA_SDR_ADDRESS + (reg));
+}
+
+static u32 ddr_sch_writel(u32 data, u32 reg)
+{
+ return writel(data,
+ (void __iomem *)SOCFPGA_SDR_SCHEDULER_ADDRESS + (reg));
+}
+
+int match_ddr_conf(u32 ddr_conf)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ddr_config); i++) {
+ if (ddr_conf == ddr_config[i])
+ return i;
+ }
+ return 0;
+}
+
+static int emif_clear(void)
+{
+ hmc_ecc_writel(0, RSTHANDSHAKECTRL);
+
+ return wait_for_bit_le32((const void *)(SOCFPGA_SDR_ADDRESS +
+ RSTHANDSHAKESTAT),
+ DDR_HMC_RSTHANDSHAKE_MASK,
+ false, 1000, false);
+}
+
+static int emif_reset(void)
+{
+ u32 c2s, s2c, ret;
+
+ c2s = hmc_ecc_readl(RSTHANDSHAKECTRL) & DDR_HMC_RSTHANDSHAKE_MASK;
+ s2c = hmc_ecc_readl(RSTHANDSHAKESTAT) & DDR_HMC_RSTHANDSHAKE_MASK;
+
+ debug("DDR: c2s=%08x s2c=%08x nr0=%08x nr1=%08x nr2=%08x dst=%08x\n",
+ c2s, s2c, hmc_readl(NIOSRESERVED0), hmc_readl(NIOSRESERVED1),
+ hmc_readl(NIOSRESERVED2), hmc_readl(DRAMSTS));
+
+ if (s2c && emif_clear()) {
+ printf("DDR: emif_clear() failed\n");
+ return -1;
+ }
+
+ debug("DDR: Triggerring emif reset\n");
+ hmc_ecc_writel(DDR_HMC_CORE2SEQ_INT_REQ, RSTHANDSHAKECTRL);
+
+ /* if seq2core[3] = 0, we are good */
+ ret = wait_for_bit_le32((const void *)(SOCFPGA_SDR_ADDRESS +
+ RSTHANDSHAKESTAT),
+ DDR_HMC_SEQ2CORE_INT_RESP_MASK,
+ false, 1000, false);
+ if (ret) {
+ printf("DDR: failed to get ack from EMIF\n");
+ return ret;
+ }
+
+ ret = emif_clear();
+ if (ret) {
+ printf("DDR: emif_clear() failed\n");
+ return ret;
+ }
+
+ debug("DDR: %s triggered successly\n", __func__);
+ return 0;
+}
+
+static int poll_hmc_clock_status(void)
+{
+ return wait_for_bit_le32(&sysmgr_regs->hmc_clk,
+ SYSMGR_HMC_CLK_STATUS_MSK, true, 1000, false);
+}
+
+/**
+ * sdram_mmr_init_full() - Function to initialize SDRAM MMR
+ *
+ * Initialize the SDRAM MMR.
+ */
+int sdram_mmr_init_full(unsigned int unused)
+{
+ u32 update_value, io48_value, ddrioctl;
+ u32 i;
+ int ret;
+
+ /* Enable access to DDR from CPU master */
+ clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_DDRREG),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE0),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1A),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1B),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1C),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1D),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1E),
+ CCU_ADBASE_DI_MASK);
+
+ /* Enable access to DDR from IO master */
+ clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE0),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1A),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1B),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1C),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1D),
+ CCU_ADBASE_DI_MASK);
+ clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1E),
+ CCU_ADBASE_DI_MASK);
+
+ /* this enables nonsecure access to DDR */
+ /* mpuregion0addr_limit */
+ FW_MPU_DDR_SCR_WRITEL(0xFFFF0000, FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMIT);
+ FW_MPU_DDR_SCR_WRITEL(0x1F, FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMITEXT);
+
+ /* nonmpuregion0addr_limit */
+ FW_MPU_DDR_SCR_WRITEL(0xFFFF0000,
+ FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMIT);
+ FW_MPU_DDR_SCR_WRITEL(0x1F, FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMITEXT);
+
+ /* Enable mpuregion0enable and nonmpuregion0enable */
+ FW_MPU_DDR_SCR_WRITEL(MPUREGION0_ENABLE | NONMPUREGION0_ENABLE,
+ FW_MPU_DDR_SCR_EN_SET);
+
+ /* Ensure HMC clock is running */
+ if (poll_hmc_clock_status()) {
+ puts("DDR: Error as HMC clock not running\n");
+ return -1;
+ }
+
+ /* release DDR scheduler from reset */
+ socfpga_per_reset(SOCFPGA_RESET(SDR), 0);
+
+ /* Try 3 times to do a calibration */
+ for (i = 0; i < 3; i++) {
+ ret = wait_for_bit_le32((const void *)(SOCFPGA_SDR_ADDRESS +
+ DDRCALSTAT),
+ DDR_HMC_DDRCALSTAT_CAL_MSK, true, 1000,
+ false);
+ if (!ret)
+ break;
+
+ emif_reset();
+ }
+
+ if (ret) {
+ puts("DDR: Error as SDRAM calibration failed\n");
+ return -1;
+ }
+ debug("DDR: Calibration success\n");
+
+ u32 ctrlcfg0 = hmc_readl(CTRLCFG0);
+ u32 ctrlcfg1 = hmc_readl(CTRLCFG1);
+ u32 dramaddrw = hmc_readl(DRAMADDRW);
+ u32 dramtim0 = hmc_readl(DRAMTIMING0);
+ u32 caltim0 = hmc_readl(CALTIMING0);
+ u32 caltim1 = hmc_readl(CALTIMING1);
+ u32 caltim2 = hmc_readl(CALTIMING2);
+ u32 caltim3 = hmc_readl(CALTIMING3);
+ u32 caltim4 = hmc_readl(CALTIMING4);
+ u32 caltim9 = hmc_readl(CALTIMING9);
+
+ /*
+ * Configure the DDR IO size [0xFFCFB008]
+ * niosreserve0: Used to indicate DDR width &
+ * bit[7:0] = Number of data bits (bit[6:5] 0x01=32bit, 0x10=64bit)
+ * bit[8] = 1 if user-mode OCT is present
+ * bit[9] = 1 if warm reset compiled into EMIF Cal Code
+ * bit[10] = 1 if warm reset is on during generation in EMIF Cal
+ * niosreserve1: IP ADCDS version encoded as 16 bit value
+ * bit[2:0] = Variant (0=not special,1=FAE beta, 2=Customer beta,
+ * 3=EAP, 4-6 are reserved)
+ * bit[5:3] = Service Pack # (e.g. 1)
+ * bit[9:6] = Minor Release #
+ * bit[14:10] = Major Release #
+ */
+ update_value = hmc_readl(NIOSRESERVED0);
+ hmc_ecc_writel(((update_value & 0xFF) >> 5), DDRIOCTRL);
+ ddrioctl = hmc_ecc_readl(DDRIOCTRL);
+
+ /* enable HPS interface to HMC */
+ hmc_ecc_writel(DDR_HMC_HPSINTFCSEL_ENABLE_MASK, HPSINTFCSEL);
+
+ /* Set the DDR Configuration */
+ io48_value = DDR_CONFIG(CTRLCFG1_CFG_ADDR_ORDER(ctrlcfg1),
+ (DRAMADDRW_CFG_BANK_ADDR_WIDTH(dramaddrw) +
+ DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(dramaddrw)),
+ DRAMADDRW_CFG_COL_ADDR_WIDTH(dramaddrw),
+ DRAMADDRW_CFG_ROW_ADDR_WIDTH(dramaddrw));
+
+ update_value = match_ddr_conf(io48_value);
+ if (update_value)
+ ddr_sch_writel(update_value, DDR_SCH_DDRCONF);
+
+ /* Configure HMC dramaddrw */
+ hmc_ecc_writel(hmc_readl(DRAMADDRW), DRAMADDRWIDTH);
+
+ /*
+ * Configure DDR timing
+ * RDTOMISS = tRTP + tRP + tRCD - BL/2
+ * WRTOMISS = WL + tWR + tRP + tRCD and
+ * WL = RL + BL/2 + 2 - rd-to-wr ; tWR = 15ns so...
+ * First part of equation is in memory clock units so divide by 2
+ * for HMC clock units. 1066MHz is close to 1ns so use 15 directly.
+ * WRTOMISS = ((RL + BL/2 + 2 + tWR) >> 1)- rd-to-wr + tRP + tRCD
+ */
+ u32 burst_len = CTRLCFG0_CFG_CTRL_BURST_LEN(ctrlcfg0);
+
+ update_value = CALTIMING2_CFG_RD_TO_WR_PCH(caltim2) +
+ CALTIMING4_CFG_PCH_TO_VALID(caltim4) +
+ CALTIMING0_CFG_ACT_TO_RDWR(caltim0) -
+ (burst_len >> 2);
+ io48_value = (((DRAMTIMING0_CFG_TCL(dramtim0) + 2 + DDR_TWR +
+ (burst_len >> 1)) >> 1) -
+ /* Up to here was in memory cycles so divide by 2 */
+ CALTIMING1_CFG_RD_TO_WR(caltim1) +
+ CALTIMING0_CFG_ACT_TO_RDWR(caltim0) +
+ CALTIMING4_CFG_PCH_TO_VALID(caltim4));
+
+ ddr_sch_writel(((CALTIMING0_CFG_ACT_TO_ACT(caltim0) <<
+ DDR_SCH_DDRTIMING_ACTTOACT_OFF) |
+ (update_value << DDR_SCH_DDRTIMING_RDTOMISS_OFF) |
+ (io48_value << DDR_SCH_DDRTIMING_WRTOMISS_OFF) |
+ ((burst_len >> 2) << DDR_SCH_DDRTIMING_BURSTLEN_OFF) |
+ (CALTIMING1_CFG_RD_TO_WR(caltim1) <<
+ DDR_SCH_DDRTIMING_RDTOWR_OFF) |
+ (CALTIMING3_CFG_WR_TO_RD(caltim3) <<
+ DDR_SCH_DDRTIMING_WRTORD_OFF) |
+ (((ddrioctl == 1) ? 1 : 0) <<
+ DDR_SCH_DDRTIMING_BWRATIO_OFF)),
+ DDR_SCH_DDRTIMING);
+
+ /* Configure DDR mode [precharge = 0] */
+ ddr_sch_writel(((ddrioctl ? 0 : 1) <<
+ DDR_SCH_DDRMOD_BWRATIOEXTENDED_OFF),
+ DDR_SCH_DDRMODE);
+
+ /* Configure the read latency */
+ ddr_sch_writel((DRAMTIMING0_CFG_TCL(dramtim0) >> 1) +
+ DDR_READ_LATENCY_DELAY,
+ DDR_SCH_READ_LATENCY);
+
+ /*
+ * Configuring timing values concerning activate commands
+ * [FAWBANK alway 1 because always 4 bank DDR]
+ */
+ ddr_sch_writel(((CALTIMING0_CFG_ACT_TO_ACT_DB(caltim0) <<
+ DDR_SCH_ACTIVATE_RRD_OFF) |
+ (CALTIMING9_CFG_4_ACT_TO_ACT(caltim9) <<
+ DDR_SCH_ACTIVATE_FAW_OFF) |
+ (DDR_ACTIVATE_FAWBANK <<
+ DDR_SCH_ACTIVATE_FAWBANK_OFF)),
+ DDR_SCH_ACTIVATE);
+
+ /*
+ * Configuring timing values concerning device to device data bus
+ * ownership change
+ */
+ ddr_sch_writel(((CALTIMING1_CFG_RD_TO_RD_DC(caltim1) <<
+ DDR_SCH_DEVTODEV_BUSRDTORD_OFF) |
+ (CALTIMING1_CFG_RD_TO_WR_DC(caltim1) <<
+ DDR_SCH_DEVTODEV_BUSRDTOWR_OFF) |
+ (CALTIMING3_CFG_WR_TO_RD_DC(caltim3) <<
+ DDR_SCH_DEVTODEV_BUSWRTORD_OFF)),
+ DDR_SCH_DEVTODEV);
+
+ /* assigning the SDRAM size */
+ unsigned long long size = sdram_calculate_size();
+ /* If the size is invalid, use default Config size */
+ if (size <= 0)
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+ else
+ gd->ram_size = size;
+
+ /* Enable or disable the SDRAM ECC */
+ if (CTRLCFG1_CFG_CTRL_EN_ECC(ctrlcfg1)) {
+ setbits_le32(SOCFPGA_SDR_ADDRESS + ECCCTRL1,
+ (DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK |
+ DDR_HMC_ECCCTL_CNT_RST_SET_MSK |
+ DDR_HMC_ECCCTL_ECC_EN_SET_MSK));
+ clrbits_le32(SOCFPGA_SDR_ADDRESS + ECCCTRL1,
+ (DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK |
+ DDR_HMC_ECCCTL_CNT_RST_SET_MSK));
+ setbits_le32(SOCFPGA_SDR_ADDRESS + ECCCTRL2,
+ (DDR_HMC_ECCCTL2_RMW_EN_SET_MSK |
+ DDR_HMC_ECCCTL2_AWB_EN_SET_MSK));
+ } else {
+ clrbits_le32(SOCFPGA_SDR_ADDRESS + ECCCTRL1,
+ (DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK |
+ DDR_HMC_ECCCTL_CNT_RST_SET_MSK |
+ DDR_HMC_ECCCTL_ECC_EN_SET_MSK));
+ clrbits_le32(SOCFPGA_SDR_ADDRESS + ECCCTRL2,
+ (DDR_HMC_ECCCTL2_RMW_EN_SET_MSK |
+ DDR_HMC_ECCCTL2_AWB_EN_SET_MSK));
+ }
+
+ debug("DDR: HMC init success\n");
+ return 0;
+}
+
+/**
+ * sdram_calculate_size() - Calculate SDRAM size
+ *
+ * Calculate SDRAM device size based on SDRAM controller parameters.
+ * Size is specified in bytes.
+ */
+unsigned long sdram_calculate_size(void)
+{
+ u32 dramaddrw = hmc_readl(DRAMADDRW);
+
+ u32 size = 1 << (DRAMADDRW_CFG_CS_ADDR_WIDTH(dramaddrw) +
+ DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(dramaddrw) +
+ DRAMADDRW_CFG_BANK_ADDR_WIDTH(dramaddrw) +
+ DRAMADDRW_CFG_ROW_ADDR_WIDTH(dramaddrw) +
+ DRAMADDRW_CFG_COL_ADDR_WIDTH(dramaddrw));
+
+ size *= (2 << (hmc_ecc_readl(DDRIOCTRL) &
+ DDR_HMC_DDRIOCTRL_IOSIZE_MSK));
+
+ return size;
+}
projects / u-boot.git / commitdiff