fsl-ddr: Fix power-down timing settings

1. TIMING_CFG_0[ACT_PD_EXIT] was set to 6 clocks, but
   It should be set to tXP parameter, tXP=max(3CK, 7.5ns)
2. TIMING_CFG_0[PRE_PD_EXIT] was set to 6 clocks, but
   It should be set to tXP (if MR0[A12]=1) else to tXPDLL parameter
   We are setting the mode register MR0[A12]='1'

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c
index 250504145045b0bb8c55daba0add464eb91cacd9..a92f1a330bd525288dec210cf067d836962bfc17 100644 (file)
--- a/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -188,12 +188,13 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr)
         * The DDR3 spec has not tXARD,
         * we use the tXP instead of it.
         * tXP=max(3nCK, 7.5ns) for DDR3.
-        * we use the tXP=6
         * spec has not the tAXPD, we use
         * tAXPD=8, need design to confirm.
         */
-       act_pd_exit_mclk = 6;
-       pre_pd_exit_mclk = 6;
+       int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
+       act_pd_exit_mclk = picos_to_mclk(tXP);
+       /* Mode register MR0[A12] is '1' - fast exit */
+       pre_pd_exit_mclk = act_pd_exit_mclk;
        taxpd_mclk = 8;
        tmrd_mclk = 4;
 #else /* CONFIG_FSL_DDR2 */