Changes since U-Boot 1.1.4:
======================================================================
+* Add support for Lite5200B board.
+ Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
+
* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
timer and cpu_reset code from cpu/$(CPU) into the new
cpu/$(CPU)/$(SOC) directories
#########################################################################
LIST_5xxx=" \
- cpci5200 icecube_5100 icecube_5200 EVAL5200 \
- mcc200 o2dnt pf5200 PM520 \
- Total5100 Total5200 Total5200_Rev2 TQM5200_auto \
+ cpci5200 EVAL5200 icecube_5100 icecube_5200 \
+ lite5200b mcc200 o2dnt pf5200 \
+ PM520 Total5100 Total5200 Total5200_Rev2 \
+ TQM5200_auto \
"
#########################################################################
inka4x0_config: unconfig
@./mkconfig inka4x0 ppc mpc5xxx inka4x0
+lite5200b_config \
+lite5200b_LOWBOOT_config: unconfig
+ @ >include/config.h
+ @ echo "#define CONFIG_MPC5200_DDR" >>include/config.h
+ @ echo "... DDR memory revision"
+ @ echo "#define CONFIG_MPC5200" >>include/config.h
+ @ echo "#define CONFIG_LITE5200B" >>include/config.h
+ @[ -z "$(findstring LOWBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @ echo "... with MPC5200B processor"
+ @./mkconfig -a IceCube ppc mpc5xxx icecube
+
mcc200_config \
mcc200_lowboot_config: unconfig
@ >include/config.h
PowerPC based boards:
---------------------
- CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCIPPC2
- CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC6
- CONFIG_AMX860 CONFIG_GTH CONFIG_pcu_e
- CONFIG_AP1000 CONFIG_gw8260 CONFIG_PIP405
- CONFIG_AR405 CONFIG_hermes CONFIG_PM826
- CONFIG_BAB7xx CONFIG_hymod CONFIG_ppmc8260
- CONFIG_c2mon CONFIG_IAD210 CONFIG_QS823
- CONFIG_CANBT CONFIG_ICU862 CONFIG_QS850
- CONFIG_CCM CONFIG_IP860 CONFIG_QS860T
- CONFIG_CMI CONFIG_IPHASE4539 CONFIG_RBC823
- CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RPXClassic
- CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXlite
- CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXsuper
- CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_rsdproto
- CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_sacsng
- CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_Sandpoint8240
- CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8245
- CONFIG_CSB272 CONFIG_LANTEC CONFIG_sbc8260
- CONFIG_CU824 CONFIG_lwmon CONFIG_sbc8560
- CONFIG_DASA_SIM CONFIG_MBX CONFIG_SM850
- CONFIG_DB64360 CONFIG_MBX860T CONFIG_SPD823TS
- CONFIG_DB64460 CONFIG_MHPC CONFIG_STXGP3
- CONFIG_DU405 CONFIG_MIP405 CONFIG_SXNI855T
- CONFIG_DUET_ADS CONFIG_MOUSSE CONFIG_TQM823L
- CONFIG_EBONY CONFIG_MPC8260ADS CONFIG_TQM8260
- CONFIG_ELPPC CONFIG_MPC8540ADS CONFIG_TQM850L
- CONFIG_ELPT860 CONFIG_MPC8540EVAL CONFIG_TQM855L
- CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM860L
- CONFIG_ERIC CONFIG_MUSENKI CONFIG_TTTech
- CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_UTX8245
- CONFIG_ETX094 CONFIG_NETPHONE CONFIG_V37
- CONFIG_EVB64260 CONFIG_NETTA CONFIG_W7OLMC
- CONFIG_FADS823 CONFIG_NETVIA CONFIG_W7OLMG
- CONFIG_FADS850SAR CONFIG_NX823 CONFIG_WALNUT
- CONFIG_FADS860T CONFIG_OCRTC CONFIG_ZPC1900
- CONFIG_FLAGADM CONFIG_ORSG CONFIG_ZUMA
- CONFIG_FPS850L CONFIG_OXC
- CONFIG_FPS860L CONFIG_PCI405
+ CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCI405
+ CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC2
+ CONFIG_AMX860 CONFIG_GTH CONFIG_PCIPPC6
+ CONFIG_AP1000 CONFIG_gw8260 CONFIG_pcu_e
+ CONFIG_AR405 CONFIG_hermes CONFIG_PIP405
+ CONFIG_BAB7xx CONFIG_hymod CONFIG_PM826
+ CONFIG_c2mon CONFIG_IAD210 CONFIG_ppmc8260
+ CONFIG_CANBT CONFIG_ICU862 CONFIG_QS823
+ CONFIG_CCM CONFIG_IP860 CONFIG_QS850
+ CONFIG_CMI CONFIG_IPHASE4539 CONFIG_QS860T
+ CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RBC823
+ CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXClassic
+ CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXlite
+ CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_RPXsuper
+ CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_rsdproto
+ CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_sacsng
+ CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8240
+ CONFIG_CSB272 CONFIG_LANTEC CONFIG_Sandpoint8245
+ CONFIG_CU824 CONFIG_LITE5200B CONFIG_sbc8260
+ CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8560
+ CONFIG_DB64360 CONFIG_MBX CONFIG_SM850
+ CONFIG_DB64460 CONFIG_MBX860T CONFIG_SPD823TS
+ CONFIG_DU405 CONFIG_MHPC CONFIG_STXGP3
+ CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_SXNI855T
+ CONFIG_EBONY CONFIG_MOUSSE CONFIG_TQM823L
+ CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM8260
+ CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM850L
+ CONFIG_ep8260 CONFIG_MPC8540EVAL CONFIG_TQM855L
+ CONFIG_ERIC CONFIG_MPC8560ADS CONFIG_TQM860L
+ CONFIG_ESTEEM192E CONFIG_MUSENKI CONFIG_TTTech
+ CONFIG_ETX094 CONFIG_MVS1 CONFIG_UTX8245
+ CONFIG_EVB64260 CONFIG_NETPHONE CONFIG_V37
+ CONFIG_FADS823 CONFIG_NETTA CONFIG_W7OLMC
+ CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMG
+ CONFIG_FADS860T CONFIG_NX823 CONFIG_WALNUT
+ CONFIG_FLAGADM CONFIG_OCRTC CONFIG_ZPC1900
+ CONFIG_FPS850L CONFIG_ORSG CONFIG_ZUMA
+ CONFIG_FPS860L CONFIG_OXC
ARM based boards:
-----------------
#include <common.h>
+#ifndef CFG_FLASH_CFI_DRIVER
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
return (res);
}
+#endif /*CFG_FLASH_CFI_DRIVER*/
#include <mpc5xxx.h>
#include <pci.h>
-#if defined(CONFIG_MPC5200_DDR)
-#include "mt46v16m16-75.h"
+#if defined(CONFIG_LITE5200B)
+#include "mt46v32m16.h"
#else
+# if defined(CONFIG_MPC5200_DDR)
+# include "mt46v16m16-75.h"
+# else
#include "mt48lc16m16a2-75.h"
+# endif
#endif
-
#ifndef CFG_RAMBOOT
static void sdram_start (int hi_addr)
{
int checkboard (void)
{
-#if defined(CONFIG_MPC5200)
+#if defined (CONFIG_LITE5200B)
+ puts ("Board: Freescale Lite5200B\n");
+#elif defined(CONFIG_MPC5200)
puts ("Board: Motorola MPC5200 (IceCube)\n");
#elif defined(CONFIG_MGT5100)
puts ("Board: Motorola MGT5100 (IceCube)\n");
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR 1 /* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40090000
+#define SDRAM_CONTROL 0x704f0f00
+#define SDRAM_CONFIG1 0x73722930
+#define SDRAM_CONFIG2 0x47770000
+#define SDRAM_TAPDELAY 0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
/* System memory space */
pci_set_region(hose->regions + 3,
CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- gd->ram_size,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ CONFIG_PCI_SYS_MEM_PHYS,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
hose->region_count = 4;
/* System memory space */
pci_set_region(hose->regions + 3,
CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- gd->ram_size,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ CONFIG_PCI_SYS_MEM_PHYS,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
hose->region_count = 4;
data_crc(struct jffs2_raw_inode *node)
{
if (node->data_crc != crc32_no_comp(0, (unsigned char *)
- ((int) &node->node_crc + sizeof (node->node_crc)),
- node->csize)) {
+ ((int) &node->node_crc + sizeof (node->node_crc)),
+ node->csize)) {
return 0;
} else {
return 1;
# define CFG_LOWBOOT16 1
#endif
#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
+#if defined(CONFIG_LITE5200B)
+# error CFG_LOWBOOT08 is incompatible with the Lite5200B
+#else
# define CFG_LOWBOOT 1
# define CFG_LOWBOOT08 1
#endif
+#endif
/*
* Autobooting
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#if defined(CONFIG_LITE5200B)
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#else
+#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
#endif
+#endif /* CONFIG_MPC5200 */
/*
* I2C configuration
*/
/*
* Flash configuration
*/
+#if defined(CONFIG_LITE5200B)
+#define CFG_FLASH_BASE 0xFE000000
+#define CFG_FLASH_SIZE 0x01000000
+#if !defined(CFG_LOWBOOT)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x01760000 + 0x00800000)
+#else /* CFG_LOWBOOT */
+#if defined(CFG_LOWBOOT08)
+# error CFG_LOWBOOT08 is incompatible with the Lite5200B
+#endif
+#if defined(CFG_LOWBOOT16)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x01060000)
+#endif
+#endif /* CFG_LOWBOOT */
+#else /* !CONFIG_LITE5200B (IceCube)*/
#define CFG_FLASH_BASE 0xFF000000
#define CFG_FLASH_SIZE 0x01000000
#if !defined(CFG_LOWBOOT)
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000)
#endif
#endif /* CFG_LOWBOOT */
+#endif /* CONFIG_LITE5200B */
#define CFG_MAX_FLASH_BANKS 2 /* max num of memory banks */
#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
#undef CONFIG_FLASH_16BIT /* Flash is 8-bit */
+#if defined(CONFIG_LITE5200B)
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_BANKS_LIST {CFG_CS1_START,CFG_CS0_START}
+#endif
+
/*
* Environment settings
*/
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x10000
+#if defined(CONFIG_LITE5200B)
+#define CFG_ENV_SECT_SIZE 0x20000
+#else
#define CFG_ENV_SECT_SIZE 0x10000
+#endif
#define CONFIG_ENV_OVERWRITE 1
/*
*/
/* #define CONFIG_FEC_10MBIT 1 */
#define CONFIG_PHY_ADDR 0x00
+#if defined(CONFIG_LITE5200B)
+#define CONFIG_FEC_MII100 1
+#endif
/*
* GPIO configuration
#define CFG_HID0_FINAL 0
#endif
+#if defined(CONFIG_LITE5200B)
+#define CFG_CS1_START CFG_FLASH_BASE
+#define CFG_CS1_SIZE CFG_FLASH_SIZE
+#define CFG_CS1_CFG 0x00047800
+#define CFG_CS0_START (CFG_FLASH_BASE + CFG_FLASH_SIZE)
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_START CFG_CS0_START
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x00047800
+#else /* IceCube aka Lite5200 */
#ifdef CONFIG_MPC5200_DDR
#define CFG_BOOTCS_START (CFG_CS1_START + CFG_CS1_SIZE)
#define CFG_CS0_SIZE CFG_FLASH_SIZE
#endif /* CONFIG_MPC5200_DDR */
+#endif /*CONFIG_LITE5200B */
#define CFG_CS_BURST 0x00000000
#define CFG_CS_DEADCYCLE 0x33333333
*/
/* #define DEBUG 1 */
-/* #define DEPLOYMENT 1 */
+/* #define DEPLOYMENT 1 */
#undef CONFIG_MPC860
#define CONFIG_MPC823 1 /* This is a MPC823e CPU. */
#define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */
#ifdef DEBUG
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
-#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */
+#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */
#ifdef DEPLOYMENT
-#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n"
-#define CONFIG_AUTOBOOT_STOP_STR "st"
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n"
+#define CONFIG_AUTOBOOT_STOP_STR "st"
#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_RESET_TO_RETRY 1
-#define CONFIG_BOOT_RETRY_MIN 1
+#define CONFIG_RESET_TO_RETRY 1
+#define CONFIG_BOOT_RETRY_MIN 1
#endif /* DEPLOYMENT */
#endif /* DEBUG */
/* pre-boot commands */
-#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial"
+#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-#if 1 /* Enable this staff could make image enlarge about 25KB. Mask it if you
- don't want the advanced function */
+#if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you
+ don't want the advanced function */
-#ifdef CONFIG_SPLASH_SCREEN
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+#ifdef CONFIG_SPLASH_SCREEN
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
- CFG_CMD_BMP | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_PING | \
- CFG_CMD_ELF | \
+ CFG_CMD_BMP | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_PING | \
+ CFG_CMD_ELF | \
CFG_CMD_REGINFO | \
- CFG_CMD_DHCP )
+ CFG_CMD_DHCP )
#else
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_PING | \
- CFG_CMD_ELF | \
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_PING | \
+ CFG_CMD_ELF | \
CFG_CMD_REGINFO | \
- CFG_CMD_DHCP )
-#endif /* CONFIG_SPLASH_SCREEN */
+ CFG_CMD_DHCP )
+#endif /* CONFIG_SPLASH_SCREEN */
/* test-only */
-#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
+#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
#define CONFIG_NETCONSOLE
-#endif /* 1 */
+#endif /* 1 */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#if defined(RPXlite_64MHz)
#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */
#else
-#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */
+#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */
#endif
/*-----------------------------------------------------------------------
projects / u-boot.git / commitdiff