ddr, fsl: add DM_I2C support

add DM_I2C support for this driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c
index ac0783b428e8bdb2b1637dddaf0b3b6f36ca86df..0aa6aedae7e16c6bf145c12bcc55b4defd77a5eb 100644 (file)
--- a/drivers/ddr/fsl/main.c
+++ b/drivers/ddr/fsl/main.c
@@ -10,6 +10,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <i2c.h>
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr.h>
@@ -82,20 +83,82 @@ u8 spd_i2c_addr[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
 
 #endif
 
+#if defined(CONFIG_DM_I2C)
+#define DEV_TYPE struct udevice
+#else
+/* Local udevice */
+struct ludevice {
+       u8 chip;
+};
+
+#define DEV_TYPE struct ludevice
+
+#endif
+
 #define SPD_SPA0_ADDRESS       0x36
 #define SPD_SPA1_ADDRESS       0x37
 
-static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
+static int ddr_i2c_read(DEV_TYPE *dev, unsigned int addr,
+                       int alen, uint8_t *buf, int len)
 {
        int ret;
+
+#ifdef CONFIG_DM_I2C
+       ret = dm_i2c_read(dev, 0, buf, len);
+#else
+       ret = i2c_read(dev->chip, addr, alen, buf, len);
+#endif
+
+       return ret;
+}
+
 #ifdef CONFIG_SYS_FSL_DDR4
-       uint8_t dummy = 0;
+static int ddr_i2c_dummy_write(unsigned int chip_addr)
+{
+       uint8_t buf = 0;
+
+#ifdef CONFIG_DM_I2C
+       struct udevice *dev;
+       int ret;
+
+       ret = i2c_get_chip_for_busnum(CONFIG_SYS_SPD_BUS_NUM, chip_addr,
+                                     1, &dev);
+       if (ret) {
+               printf("%s: Cannot find udev for a bus %d\n", __func__,
+                      CONFIG_SYS_SPD_BUS_NUM);
+               return ret;
+       }
+
+       return dm_i2c_write(dev, 0, &buf, 1);
+#else
+       return i2c_write(chip_addr, 0, 1, &buf, 1);
 #endif
 
-#ifndef CONFIG_DM_I2C
-       i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
+       return 0;
+}
 #endif
 
+static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
+{
+       int ret;
+       DEV_TYPE *dev;
+
+#if defined(CONFIG_DM_I2C)
+       ret = i2c_get_chip_for_busnum(CONFIG_SYS_SPD_BUS_NUM, i2c_address,
+                                     1, &dev);
+       if (ret) {
+               printf("%s: Cannot find udev for a bus %d\n", __func__,
+                      CONFIG_SYS_SPD_BUS_NUM);
+               return;
+       }
+#else /* Non DM I2C support - will be removed */
+       struct ludevice ldev = {
+               .chip = i2c_address,
+       };
+       dev = &ldev;
+
+       i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
+#endif
 
 #ifdef CONFIG_SYS_FSL_DDR4
        /*
@@ -104,49 +167,19 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
         * To access the upper 256 bytes, we need to set EE page address to 1
         * See Jedec standar No. 21-C for detail
         */
-#ifndef CONFIG_DM_I2C
-       i2c_write(SPD_SPA0_ADDRESS, 0, 1, &dummy, 1);
-       ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, 256);
+       ddr_i2c_dummy_write(SPD_SPA0_ADDRESS);
+       ret = ddr_i2c_read(dev, 0, 1, (uchar *)spd, 256);
        if (!ret) {
-               i2c_write(SPD_SPA1_ADDRESS, 0, 1, &dummy, 1);
-               ret = i2c_read(i2c_address, 0, 1,
-                              (uchar *)((ulong)spd + 256),
-                              min(256,
-                                  (int)sizeof(generic_spd_eeprom_t) - 256));
+               ddr_i2c_dummy_write(SPD_SPA1_ADDRESS);
+               ret = ddr_i2c_read(dev, 0, 1, (uchar *)((ulong)spd + 256),
+                                  min(256,
+                                      (int)sizeof(generic_spd_eeprom_t)
+                                      - 256));
        }
-#else
-       struct udevice *dev;
-       int read_len = min(256, (int)sizeof(generic_spd_eeprom_t) - 256);
 
-       ret = i2c_get_chip_for_busnum(0, SPD_SPA0_ADDRESS, 1, &dev);
-       if (!ret)
-               dm_i2c_write(dev, 0, &dummy, 1);
-       ret = i2c_get_chip_for_busnum(0, i2c_address, 1, &dev);
-       if (!ret) {
-               if (!dm_i2c_read(dev, 0, (uchar *)spd, 256)) {
-                       if (!i2c_get_chip_for_busnum(0, SPD_SPA1_ADDRESS,
-                                                    1, &dev))
-                               dm_i2c_write(dev, 0, &dummy, 1);
-                       if (!i2c_get_chip_for_busnum(0, i2c_address, 1, &dev))
-                               ret = dm_i2c_read(dev, 0,
-                                                 (uchar *)((ulong)spd + 256),
-                                                 read_len);
-               }
-       }
-#endif
-
-#else
-
-#ifndef CONFIG_DM_I2C
-       ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
-                       sizeof(generic_spd_eeprom_t));
 #else
-       ret = i2c_get_chip_for_busnum(0, i2c_address, 1, &dev);
-       if (!ret)
-               ret = dm_i2c_read(dev, 0, (uchar *)spd,
-                                 sizeof(generic_spd_eeprom_t));
-#endif
-
+       ret = ddr_i2c_read(dev, 0, 1, (uchar *)spd,
+                          sizeof(generic_spd_eeprom_t));
 #endif
 
        if (ret) {