--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Gary Jennejohn, DENX Software Engineering, gj@denx.de.
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <image.h>
+#include <asm/byteorder.h>
+#include <linux/mtd/nand.h>
+#include <fat.h>
+
+#include "auto_update.h"
+
+#ifdef CONFIG_AUTO_UPDATE
+
+#if !(CONFIG_COMMANDS & CFG_CMD_FAT)
+#error "must define CFG_CMD_FAT"
+#endif
+
+extern au_image_t au_image[];
+extern int N_AU_IMAGES;
+
+#define AU_DEBUG
+#undef AU_DEBUG
+
+#undef debug
+#ifdef AU_DEBUG
+#define debug(fmt,args...) printf (fmt ,##args)
+#else
+#define debug(fmt,args...)
+#endif /* AU_DEBUG */
+
+
+#define LOAD_ADDR ((unsigned char *)0x100000) /* where to load files into memory */
+#define MAX_LOADSZ 0x1e00000
+
+/* externals */
+extern int fat_register_device(block_dev_desc_t *, int);
+extern int file_fat_detectfs(void);
+extern long file_fat_read(const char *, void *, unsigned long);
+long do_fat_read (const char *filename, void *buffer, unsigned long maxsize, int dols);
+#ifdef CONFIG_VFD
+extern int trab_vfd (ulong);
+extern int transfer_pic(unsigned char, unsigned char *, int, int);
+#endif
+extern int flash_sect_erase(ulong, ulong);
+extern int flash_sect_protect (int, ulong, ulong);
+extern int flash_write (uchar *, ulong, ulong);
+/* change char* to void* to shutup the compiler */
+extern block_dev_desc_t *get_dev (char*, int);
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+/* references to names in cmd_nand.c */
+#define NANDRW_READ 0x01
+#define NANDRW_WRITE 0x00
+#define NANDRW_JFFS2 0x02
+#define NANDRW_JFFS2_SKIP 0x04
+extern struct nand_chip nand_dev_desc[];
+extern int nand_rw(struct nand_chip* nand, int cmd, size_t start, size_t len,
+ size_t * retlen, u_char * buf);
+extern int nand_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean);
+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
+
+extern block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
+
+
+int au_check_cksum_valid(int i, long nbytes)
+{
+ image_header_t *hdr;
+ unsigned long checksum;
+
+ hdr = (image_header_t *)LOAD_ADDR;
+
+ if ((au_image[i].type == AU_FIRMWARE) && (au_image[i].size != ntohl(hdr->ih_size))) {
+ printf ("Image %s has wrong size\n", au_image[i].name);
+ return -1;
+ }
+
+ if (nbytes != (sizeof(*hdr) + ntohl(hdr->ih_size))) {
+ printf ("Image %s bad total SIZE\n", au_image[i].name);
+ return -1;
+ }
+ /* check the data CRC */
+ checksum = ntohl(hdr->ih_dcrc);
+
+ if (crc32 (0, (char *)(LOAD_ADDR + sizeof(*hdr)), ntohl(hdr->ih_size))
+ != checksum) {
+ printf ("Image %s bad data checksum\n", au_image[i].name);
+ return -1;
+ }
+ return 0;
+}
+
+
+int au_check_header_valid(int i, long nbytes)
+{
+ image_header_t *hdr;
+ unsigned long checksum;
+
+ hdr = (image_header_t *)LOAD_ADDR;
+ /* check the easy ones first */
+#undef CHECK_VALID_DEBUG
+#ifdef CHECK_VALID_DEBUG
+ printf("magic %#x %#x ", ntohl(hdr->ih_magic), IH_MAGIC);
+ printf("arch %#x %#x ", hdr->ih_arch, IH_CPU_PPC);
+ printf("size %#x %#lx ", ntohl(hdr->ih_size), nbytes);
+ printf("type %#x %#x ", hdr->ih_type, IH_TYPE_KERNEL);
+#endif
+ if (nbytes < sizeof(*hdr))
+ {
+ printf ("Image %s bad header SIZE\n", au_image[i].name);
+ return -1;
+ }
+ if (ntohl(hdr->ih_magic) != IH_MAGIC || hdr->ih_arch != IH_CPU_PPC)
+ {
+ printf ("Image %s bad MAGIC or ARCH\n", au_image[i].name);
+ return -1;
+ }
+ /* check the hdr CRC */
+ checksum = ntohl(hdr->ih_hcrc);
+ hdr->ih_hcrc = 0;
+
+ if (crc32 (0, (char *)hdr, sizeof(*hdr)) != checksum) {
+ printf ("Image %s bad header checksum\n", au_image[i].name);
+ return -1;
+ }
+ hdr->ih_hcrc = htonl(checksum);
+
+ /* check the type - could do this all in one gigantic if() */
+ if ((au_image[i].type == AU_FIRMWARE) && (hdr->ih_type != IH_TYPE_FIRMWARE)) {
+ printf ("Image %s wrong type\n", au_image[i].name);
+ return -1;
+ }
+ if ((au_image[i].type == AU_SCRIPT) && (hdr->ih_type != IH_TYPE_SCRIPT)) {
+ printf ("Image %s wrong type\n", au_image[i].name);
+ return -1;
+ }
+
+ /* recycle checksum */
+ checksum = ntohl(hdr->ih_size);
+
+#if 0 /* test-only */
+ /* for kernel and app the image header must also fit into flash */
+ if (idx != IDX_DISK)
+ checksum += sizeof(*hdr);
+ /* check the size does not exceed space in flash. HUSH scripts */
+ /* all have ausize[] set to 0 */
+ if ((ausize[idx] != 0) && (ausize[idx] < checksum)) {
+ printf ("Image %s is bigger than FLASH\n", au_image[i].name);
+ return -1;
+ }
+#endif
+
+ return 0;
+}
+
+
+int au_do_update(int i, long sz)
+{
+ image_header_t *hdr;
+ char *addr;
+ long start, end;
+ int off, rc;
+ uint nbytes;
+ int k;
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+ int total;
+#endif
+
+ hdr = (image_header_t *)LOAD_ADDR;
+
+ switch (au_image[i].type) {
+ case AU_SCRIPT:
+ printf("Executing script %s\n", au_image[i].name);
+
+ /* execute a script */
+ if (hdr->ih_type == IH_TYPE_SCRIPT) {
+ addr = (char *)((char *)hdr + sizeof(*hdr));
+ /* stick a NULL at the end of the script, otherwise */
+ /* parse_string_outer() runs off the end. */
+ addr[ntohl(hdr->ih_size)] = 0;
+ addr += 8;
+
+ /*
+ * Replace cr/lf with ;
+ */
+ k = 0;
+ while (addr[k] != 0) {
+ if ((addr[k] == 10) || (addr[k] == 13)) {
+ addr[k] = ';';
+ }
+ k++;
+ }
+
+ run_command(addr, 0);
+ return 0;
+ }
+
+ break;
+
+ case AU_FIRMWARE:
+ case AU_NOR:
+ case AU_NAND:
+ start = au_image[i].start;
+ end = au_image[i].start + au_image[i].size - 1;
+
+ /* unprotect the address range */
+ /* this assumes that ONLY the firmware is protected! */
+ if (au_image[i].type == AU_FIRMWARE) {
+ flash_sect_protect(0, start, end);
+ }
+
+ /*
+ * erase the address range.
+ */
+ if (au_image[i].type != AU_NAND) {
+ printf("Updating NOR FLASH with image %s\n", au_image[i].name);
+ debug ("flash_sect_erase(%lx, %lx);\n", start, end);
+ flash_sect_erase(start, end);
+ } else {
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+ printf("Updating NAND FLASH with image %s\n", au_image[i].name);
+ debug ("nand_erase(%lx, %lx);\n", start, end);
+ rc = nand_erase (nand_dev_desc, start, end - start + 1, 0);
+ debug ("nand_erase returned %x\n", rc);
+#endif
+ }
+
+ udelay(10000);
+
+ /* strip the header - except for the kernel and ramdisk */
+ if (au_image[i].type != AU_FIRMWARE) {
+ addr = (char *)hdr;
+ off = sizeof(*hdr);
+ nbytes = sizeof(*hdr) + ntohl(hdr->ih_size);
+ } else {
+ addr = (char *)((char *)hdr + sizeof(*hdr));
+ off = 0;
+ nbytes = ntohl(hdr->ih_size);
+ }
+
+ /*
+ * copy the data from RAM to FLASH
+ */
+ if (au_image[i].type != AU_NAND) {
+ debug ("flash_write(%p, %lx %x)\n", addr, start, nbytes);
+ rc = flash_write(addr, start, nbytes);
+ } else {
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+ debug ("nand_rw(%p, %lx %x)\n", addr, start, nbytes);
+ rc = nand_rw(nand_dev_desc, NANDRW_WRITE | NANDRW_JFFS2,
+ start, nbytes, &total, addr);
+ debug ("nand_rw: ret=%x total=%d nbytes=%d\n", rc, total, nbytes);
+#endif
+ }
+ if (rc != 0) {
+ printf("Flashing failed due to error %d\n", rc);
+ return -1;
+ }
+
+ /*
+ * check the dcrc of the copy
+ */
+ if (au_image[i].type != AU_NAND) {
+ rc = crc32 (0, (char *)(start + off), ntohl(hdr->ih_size));
+ } else {
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+ rc = nand_rw(nand_dev_desc, NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP,
+ start, nbytes, &total, addr);
+ rc = crc32 (0, (char *)(addr + off), ntohl(hdr->ih_size));
+#endif
+ }
+ if (rc != ntohl(hdr->ih_dcrc)) {
+ printf ("Image %s Bad Data Checksum After COPY\n", au_image[i].name);
+ return -1;
+ }
+
+ /* protect the address range */
+ /* this assumes that ONLY the firmware is protected! */
+ if (au_image[i].type == AU_FIRMWARE) {
+ flash_sect_protect(1, start, end);
+ }
+
+ break;
+
+ default:
+ printf("Wrong image type selected!\n");
+ }
+
+ return 0;
+}
+
+
+static void process_macros (const char *input, char *output)
+{
+ char c, prev;
+ const char *varname_start = NULL;
+ int inputcnt = strlen (input);
+ int outputcnt = CFG_CBSIZE;
+ int state = 0; /* 0 = waiting for '$' */
+ /* 1 = waiting for '(' or '{' */
+ /* 2 = waiting for ')' or '}' */
+ /* 3 = waiting for ''' */
+#ifdef DEBUG_PARSER
+ char *output_start = output;
+
+ printf ("[PROCESS_MACROS] INPUT len %d: \"%s\"\n", strlen(input), input);
+#endif
+
+ prev = '\0'; /* previous character */
+
+ while (inputcnt && outputcnt) {
+ c = *input++;
+ inputcnt--;
+
+ if (state!=3) {
+ /* remove one level of escape characters */
+ if ((c == '\\') && (prev != '\\')) {
+ if (inputcnt-- == 0)
+ break;
+ prev = c;
+ c = *input++;
+ }
+ }
+
+ switch (state) {
+ case 0: /* Waiting for (unescaped) $ */
+ if ((c == '\'') && (prev != '\\')) {
+ state = 3;
+ break;
+ }
+ if ((c == '$') && (prev != '\\')) {
+ state++;
+ } else {
+ *(output++) = c;
+ outputcnt--;
+ }
+ break;
+ case 1: /* Waiting for ( */
+ if (c == '(' || c == '{') {
+ state++;
+ varname_start = input;
+ } else {
+ state = 0;
+ *(output++) = '$';
+ outputcnt--;
+
+ if (outputcnt) {
+ *(output++) = c;
+ outputcnt--;
+ }
+ }
+ break;
+ case 2: /* Waiting for ) */
+ if (c == ')' || c == '}') {
+ int i;
+ char envname[CFG_CBSIZE], *envval;
+ int envcnt = input-varname_start-1; /* Varname # of chars */
+
+ /* Get the varname */
+ for (i = 0; i < envcnt; i++) {
+ envname[i] = varname_start[i];
+ }
+ envname[i] = 0;
+
+ /* Get its value */
+ envval = getenv (envname);
+
+ /* Copy into the line if it exists */
+ if (envval != NULL)
+ while ((*envval) && outputcnt) {
+ *(output++) = *(envval++);
+ outputcnt--;
+ }
+ /* Look for another '$' */
+ state = 0;
+ }
+ break;
+ case 3: /* Waiting for ' */
+ if ((c == '\'') && (prev != '\\')) {
+ state = 0;
+ } else {
+ *(output++) = c;
+ outputcnt--;
+ }
+ break;
+ }
+ prev = c;
+ }
+
+ if (outputcnt)
+ *output = 0;
+
+#ifdef DEBUG_PARSER
+ printf ("[PROCESS_MACROS] OUTPUT len %d: \"%s\"\n",
+ strlen(output_start), output_start);
+#endif
+}
+
+
+/*
+ * this is called from board_init() after the hardware has been set up
+ * and is usable. That seems like a good time to do this.
+ * Right now the return value is ignored.
+ */
+int do_auto_update(void)
+{
+ block_dev_desc_t *stor_dev;
+ long sz;
+ int i, res, cnt, old_ctrlc, got_ctrlc;
+ char buffer[32];
+ char str[80];
+
+ /*
+ * Check whether a CompactFlash is inserted
+ */
+ if (ide_dev_desc[0].type == DEV_TYPE_UNKNOWN) {
+ return -1; /* no disk detected! */
+ }
+
+ /* check whether it has a partition table */
+ stor_dev = get_dev("ide", 0);
+ if (stor_dev == NULL) {
+ debug ("Uknown device type\n");
+ return -1;
+ }
+ if (fat_register_device(stor_dev, 1) != 0) {
+ debug ("Unable to register ide disk 0:1 for fatls\n");
+ return -1;
+ }
+
+ /*
+ * Check if magic file is present
+ */
+ if (do_fat_read(AU_MAGIC_FILE, buffer, sizeof(buffer), LS_NO) <= 0) {
+ return -1;
+ }
+
+#ifdef CONFIG_AUTO_UPDATE_SHOW
+ board_auto_update_show(1);
+#endif
+ puts("\nAutoUpdate Disk detected! Trying to update system...\n");
+
+ /* make sure that we see CTRL-C and save the old state */
+ old_ctrlc = disable_ctrlc(0);
+
+ /* just loop thru all the possible files */
+ for (i = 0; i < N_AU_IMAGES; i++) {
+ /*
+ * Try to expand the environment var in the fname
+ */
+ process_macros(au_image[i].name, str);
+ strcpy(au_image[i].name, str);
+
+ printf("Reading %s ...", au_image[i].name);
+ /* just read the header */
+ sz = do_fat_read(au_image[i].name, LOAD_ADDR, sizeof(image_header_t), LS_NO);
+ debug ("read %s sz %ld hdr %d\n",
+ au_image[i].name, sz, sizeof(image_header_t));
+ if (sz <= 0 || sz < sizeof(image_header_t)) {
+ puts(" not found\n");
+ continue;
+ }
+ if (au_check_header_valid(i, sz) < 0) {
+ puts(" header not valid\n");
+ continue;
+ }
+ sz = do_fat_read(au_image[i].name, LOAD_ADDR, MAX_LOADSZ, LS_NO);
+ debug ("read %s sz %ld hdr %d\n",
+ au_image[i].name, sz, sizeof(image_header_t));
+ if (sz <= 0 || sz <= sizeof(image_header_t)) {
+ puts(" not found\n");
+ continue;
+ }
+ if (au_check_cksum_valid(i, sz) < 0) {
+ puts(" checksum not valid\n");
+ continue;
+ }
+ puts(" done\n");
+
+ do {
+ res = au_do_update(i, sz);
+ /* let the user break out of the loop */
+ if (ctrlc() || had_ctrlc()) {
+ clear_ctrlc();
+ if (res < 0)
+ got_ctrlc = 1;
+ break;
+ }
+ cnt++;
+ } while (res < 0);
+ }
+
+ /* restore the old state */
+ disable_ctrlc(old_ctrlc);
+
+ puts("AutoUpdate finished\n\n");
+#ifdef CONFIG_AUTO_UPDATE_SHOW
+ board_auto_update_show(0);
+#endif
+
+ return 0;
+}
+
+
+int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ do_auto_update();
+
+ return 0;
+}
+U_BOOT_CMD(
+ autoupd, 1, 1, auto_update,
+ "autoupd - Automatically update images\n",
+ NULL
+);
+#endif /* CONFIG_AUTO_UPDATE */
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _AUTO_UPDATE_H_
+#define _AUTO_UPDATE_H_
+
+#define MBR_MAGIC 0x07081967
+#define MBR_MAGIC_ADDR 0x100 /* offset 0x100 should be free space */
+
+#define AU_MAGIC_FILE "__auto_update"
+
+#define AU_SCRIPT 1
+#define AU_FIRMWARE 2
+#define AU_NOR 3
+#define AU_NAND 4
+
+struct au_image_s {
+ char name[80];
+ ulong start;
+ ulong size;
+ int type;
+};
+
+typedef struct au_image_s au_image_t;
+
+int do_auto_update(void);
+#ifdef CONFIG_AUTO_UPDATE_SHOW
+void board_auto_update_show(int au_active);
+#endif
+
+#endif /* #ifndef _AUTO_UPDATE_H_ */
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break;
default: printf ("Unknown Vendor "); break;
}
break;
case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
break;
+ case FLASH_SST320: printf ("SST39LF/VF320 (32 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_SST640: printf ("SST39LF/VF640 (64 Mbit, uniform sector size)\n");
+ break;
default: printf ("Unknown Chip Type\n");
break;
}
case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
+ case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
+ info->flash_id = FLASH_MAN_EXCEL;
+ break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->sector_count = 128;
info->size = 0x00800000; break; /* => 8 MB */
+#if !(defined(CONFIG_ADCIOP) || defined(CONFIG_DASA_SIM))
case (CFG_FLASH_WORD_SIZE)SST_ID_xF800A:
info->flash_id += FLASH_SST800A;
info->sector_count = 16;
break; /* => 1 MB */
case (CFG_FLASH_WORD_SIZE)SST_ID_xF160A:
+ case (CFG_FLASH_WORD_SIZE)SST_ID_xF1601:
+ case (CFG_FLASH_WORD_SIZE)SST_ID_xF1602:
info->flash_id += FLASH_SST160A;
info->sector_count = 32;
info->size = 0x00200000;
break; /* => 2 MB */
+ case (CFG_FLASH_WORD_SIZE)SST_ID_xF3201:
+ case (CFG_FLASH_WORD_SIZE)SST_ID_xF3202:
+ info->flash_id += FLASH_SST320;
+ info->sector_count = 64;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE)SST_ID_xF6401:
+ case (CFG_FLASH_WORD_SIZE)SST_ID_xF6402:
+ info->flash_id += FLASH_SST640;
+ info->sector_count = 128;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+
default:
info->flash_id = FLASH_UNKNOWN;
return (0); /* => no or unknown flash */
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_AMD)
info->protect[i] = 0;
else
info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
int i;
/* Check if Flash is (sufficiently) erased */
- if ((*((volatile CFG_FLASH_WORD_SIZE *)dest) &
- (CFG_FLASH_WORD_SIZE)data) != (CFG_FLASH_WORD_SIZE)data) {
+ if ((*((vu_long *)dest) & data) != data) {
return (2);
}
+
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
/*
- * (C) Copyright 2001-2003
+ * (C) Copyright 2001-2004
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
#define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */
#define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */
-#define SET_FPGA(data) out32(GPIO0_OR, data)
+#ifndef SET_FPGA
+# define SET_FPGA(data) out32(GPIO0_OR, data)
+#endif
+
+#ifdef FPGA_PROG_ACTIVE_HIGH
+# define FPGA_PRG_LOW FPGA_PRG
+# define FPGA_PRG_HIGH 0
+#else
+# define FPGA_PRG_LOW 0
+# define FPGA_PRG_HIGH FPGA_PRG
+#endif
+
+#define FPGA_CLK_LOW 0
+#define FPGA_CLK_HIGH FPGA_CLK
-#define FPGA_WRITE_1 { \
- SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \
- SET_FPGA(FPGA_PRG | FPGA_DATA); /* set data to 1 */ \
- SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \
- SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
+#define FPGA_DATA_LOW 0
+#define FPGA_DATA_HIGH FPGA_DATA
+
+#define FPGA_WRITE_1 { \
+ SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW | FPGA_DATA_HIGH); /* set clock to 0 */ \
+ SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW | FPGA_DATA_HIGH); /* set data to 1 */ \
+ SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH); /* set clock to 1 */ \
+ SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);} /* set data to 1 */
#define FPGA_WRITE_0 { \
- SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \
- SET_FPGA(FPGA_PRG); /* set data to 0 */ \
- SET_FPGA(FPGA_PRG | FPGA_CLK); /* set clock to 1 */ \
- SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
+ SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW | FPGA_DATA_HIGH); /* set clock to 0 */ \
+ SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_LOW | FPGA_DATA_LOW); /* set data to 0 */ \
+ SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_LOW); /* set clock to 1 */ \
+ SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);} /* set data to 1 */
+
+#ifndef FPGA_DONE_STATE
+# define FPGA_DONE_STATE (in32(GPIO0_IR) & FPGA_DONE)
+#endif
+#ifndef FPGA_INIT_STATE
+# define FPGA_INIT_STATE (in32(GPIO0_IR) & FPGA_INIT)
+#endif
static int fpga_boot(unsigned char *fpgadata, int size)
/*
* Setup port pins for fpga programming
*/
+#ifndef CONFIG_M5249
out32(GPIO0_ODR, 0x00000000); /* no open drain pins */
out32(GPIO0_TCR, in32(GPIO0_TCR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* setup for output */
- out32(GPIO0_OR, in32(GPIO0_OR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set pins to high */
+#endif
+ SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH); /* set pins to high */
- DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
- DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+ DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
+ DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
/*
* Init fpga by asserting and deasserting PROGRAM*
*/
- SET_FPGA(FPGA_CLK | FPGA_DATA);
+ SET_FPGA(FPGA_PRG_LOW | FPGA_CLK_HIGH | FPGA_DATA_HIGH); /* set prog active */
/* Wait for FPGA init line low */
count = 0;
- while (in32(GPIO0_IR) & FPGA_INIT)
+ while (FPGA_INIT_STATE)
{
udelay(1000); /* wait 1ms */
/* Check for timeout - 100us max, so use 3ms */
}
}
- DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
- DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+ DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
+ DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
/* deassert PROGRAM* */
- SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
+ SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH); /* set prog inactive */
/* Wait for FPGA end of init period . */
count = 0;
- while (!(in32(GPIO0_IR) & FPGA_INIT))
+ while (!(FPGA_INIT_STATE))
{
udelay(1000); /* wait 1ms */
/* Check for timeout */
}
}
- DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
- DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+ DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
+ DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
DBG("write configuration data into fpga\n");
/* write configuration-data into fpga... */
}
#endif
- DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
- DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+ DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
+ DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
/*
* Check if fpga's DONE signal - correctly booted ?
/* Wait for FPGA end of programming period . */
count = 0;
- while (!(in32(GPIO0_IR) & FPGA_DONE))
+ while (!(FPGA_DONE_STATE))
{
udelay(1000); /* wait 1ms */
/* Check for timeout */
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "lcd.h"
+
+
+int palette_index;
+int palette_value;
+
+
+#ifdef CFG_LCD_ENDIAN
+void lcd_setup(int lcd, int config)
+{
+ if (lcd == 0) {
+ /*
+ * Set endianess and reset lcd controller 0 (small)
+ */
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD0_RST); /* set reset to low */
+ udelay(10); /* wait 10us */
+ if (config == 1) {
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
+ } else {
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
+ }
+ udelay(10); /* wait 10us */
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD0_RST); /* set reset to high */
+ } else {
+ /*
+ * Set endianess and reset lcd controller 1 (big)
+ */
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD1_RST); /* set reset to low */
+ udelay(10); /* wait 10us */
+ if (config == 1) {
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
+ } else {
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
+ }
+ udelay(10); /* wait 10us */
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD1_RST); /* set reset to high */
+ }
+
+ /*
+ * CFG_LCD_ENDIAN may also be FPGA_RESET, so set inactive
+ */
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* set reset high again */
+}
+#endif /* #ifdef CFG_LCD_ENDIAN */
+
+
+void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
+ uchar *logo_bmp, ulong len)
+{
+ int i;
+ ushort s1dReg;
+ uchar s1dValue;
+ uchar *ptr;
+ ushort *ptr2;
+ ushort val;
+ unsigned char *dst;
+ int x, y;
+ int width, height, bpp, colors, line_size;
+ int header_size;
+ unsigned char *bmp;
+ unsigned char r, g, b;
+ BITMAPINFOHEADER *bm_info;
+ int reg_byte_swap;
+
+ /*
+ * Detect epson
+ */
+ if (lcd_reg[0] == 0x1c) {
+ /*
+ * Big epson detected
+ */
+ reg_byte_swap = FALSE;
+ palette_index = 0x1e2;
+ palette_value = 0x1e4;
+ puts("LCD: S1D13806");
+ } else if (lcd_reg[1] == 0x1c) {
+ /*
+ * Big epson detected (with register swap bug)
+ */
+ reg_byte_swap = TRUE;
+ palette_index = 0x1e3;
+ palette_value = 0x1e5;
+ puts("LCD: S1D13806S");
+ } else if (lcd_reg[0] == 0x18) {
+ /*
+ * Small epson detected (704)
+ */
+ reg_byte_swap = FALSE;
+ palette_index = 0x15;
+ palette_value = 0x17;
+ puts("LCD: S1D13704");
+ } else if (lcd_reg[0x10000] == 0x24) {
+ /*
+ * Small epson detected (705)
+ */
+ reg_byte_swap = FALSE;
+ palette_index = 0x15;
+ palette_value = 0x17;
+ lcd_reg += 0x10000; /* add offset for 705 regs */
+ puts("LCD: S1D13705");
+ } else {
+ puts("LCD: No controller detected!\n");
+ return;
+ }
+
+ for (i = 0; i<reg_count; i++) {
+ s1dReg = regs[i].Index;
+ if (reg_byte_swap) {
+ if ((s1dReg & 0x0001) == 0)
+ s1dReg |= 0x0001;
+ else
+ s1dReg &= ~0x0001;
+ }
+ s1dValue = regs[i].Value;
+ lcd_reg[s1dReg] = s1dValue;
+ }
+
+ /*
+ * Decompress bmp image
+ */
+ dst = malloc(CFG_LCD_LOGO_MAX_SIZE);
+ if (gunzip(dst, CFG_LCD_LOGO_MAX_SIZE, (uchar *)logo_bmp, &len) != 0) {
+ return;
+ }
+
+ /*
+ * Check for bmp mark 'BM'
+ */
+ if (*(ushort *)dst != 0x424d) {
+ printf("LCD: Unknown image format!\n");
+ free(dst);
+ return;
+ }
+
+ /*
+ * Get image info from bmp-header
+ */
+ bm_info = (BITMAPINFOHEADER *)(dst + 14);
+ bpp = LOAD_SHORT(bm_info->biBitCount);
+ width = LOAD_LONG(bm_info->biWidth);
+ height = LOAD_LONG(bm_info->biHeight);
+ switch (bpp) {
+ case 1:
+ colors = 1;
+ line_size = width >> 3;
+ break;
+ case 4:
+ colors = 16;
+ line_size = width >> 1;
+ break;
+ case 8:
+ colors = 256;
+ line_size = width;
+ break;
+ case 24:
+ colors = 0;
+ line_size = width * 3;
+ break;
+ default:
+ printf("LCD: Unknown bpp (%d) im image!\n", bpp);
+ free(dst);
+ return;
+ }
+ printf(" (%d*%d, %dbpp)\n", width, height, bpp);
+
+ /*
+ * Write color palette
+ */
+ if (colors <= 256) {
+ ptr = (unsigned char *)(dst + 14 + 40);
+ for (i=0; i<colors; i++) {
+ b = *ptr++;
+ g = *ptr++;
+ r = *ptr++;
+ ptr++;
+ S1D_WRITE_PALETTE(lcd_reg, i, r, g, b);
+ }
+ }
+
+ /*
+ * Write bitmap data into framebuffer
+ */
+ ptr = lcd_mem;
+ ptr2 = (ushort *)lcd_mem;
+ header_size = 14 + 40 + 4*colors; /* skip bmp header */
+ for (y=0; y<height; y++) {
+ bmp = &dst[(height-1-y)*line_size + header_size];
+ if (bpp == 24) {
+ for (x=0; x<width; x++) {
+ /*
+ * Generate epson 16bpp fb-format from 24bpp image
+ */
+ b = *bmp++ >> 3;
+ g = *bmp++ >> 2;
+ r = *bmp++ >> 3;
+ val = ((r & 0x1f) << 11) | ((g & 0x3f) << 5) | (b & 0x1f);
+ *ptr2++ = val;
+ }
+ } else {
+ for (x=0; x<line_size; x++) {
+ *ptr++ = *bmp++;
+ }
+ }
+ }
+
+ free(dst);
+}
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Neutralize little endians.
+ */
+#define SWAP_LONG(data) ((unsigned long) \
+ (((unsigned long)(data) >> 24) | \
+ ((unsigned long)(data) << 24) | \
+ (((unsigned long)(data) >> 8) & 0x0000ff00 ) | \
+ (((unsigned long)(data) << 8) & 0x00ff0000 )))
+#define SWAP_SHORT(data) ((unsigned short) \
+ (((unsigned short)(data) >> 8 ) | \
+ ((unsigned short)(data) << 8 )))
+#define LOAD_LONG(data) SWAP_LONG(data)
+#define LOAD_SHORT(data) SWAP_SHORT(data)
+
+#ifndef FALSE
+#define FALSE 0
+#define TRUE (!FALSE)
+#endif
+
+#define S1D_WRITE_PALETTE(p,i,r,g,b) \
+ { \
+ ((volatile uchar*)(p))[palette_index] = (uchar)(i); \
+ ((volatile uchar*)(p))[palette_value] = (uchar)(r); \
+ ((volatile uchar*)(p))[palette_value] = (uchar)(g); \
+ ((volatile uchar*)(p))[palette_value] = (uchar)(b); \
+ }
+
+typedef struct
+{
+ ushort Index;
+ uchar Value;
+} S1D_REGS;
+
+typedef struct /**** BMP file info structure ****/
+{
+ unsigned int biSize; /* Size of info header */
+ int biWidth; /* Width of image */
+ int biHeight; /* Height of image */
+ unsigned short biPlanes; /* Number of color planes */
+ unsigned short biBitCount; /* Number of bits per pixel */
+ unsigned int biCompression; /* Type of compression to use */
+ unsigned int biSizeImage; /* Size of image data */
+ int biXPelsPerMeter; /* X pixels per meter */
+ int biYPelsPerMeter; /* Y pixels per meter */
+ unsigned int biClrUsed; /* Number of colors used */
+ unsigned int biClrImportant; /* Number of important colors */
+} BITMAPINFOHEADER;
+
--- /dev/null
+/*
+ *
+ * Generic Header information generated by 13704CFG.EXE (Build 10)
+ *
+ * Copyright (c) 2000,2001 Epson Research and Development, Inc.
+ * All rights reserved.
+ *
+ * Panel: 320x240x4bpp 78Hz Mono 4-Bit STN, Disabled (PCLK=6.666MHz)
+ *
+ * This file defines the configuration environment and registers,
+ * which can be used by any software, such as display drivers.
+ *
+ * PLEASE NOTE: If you FTP this file to a non-Windows platform, make
+ * sure you transfer this file using ASCII, not BINARY
+ * mode.
+ *
+ */
+
+static S1D_REGS regs_13704_320_240_4bpp[] =
+{
+ { 0x00, 0x00 }, /* Revision Code Register */
+ { 0x01, 0x04 }, /*00*/ /* Mode Register 0 Register */
+ { 0x02, 0xA4 }, /*a0*/ /* Mode Register 1 Register */
+ { 0x03, 0x83 }, /*03*/ /* Mode Register 2 Register - bit7 is LUT bypass */
+ { 0x04, 0x27 }, /* Horizontal Panel Size Register */
+ { 0x05, 0xEF }, /* Vertical Panel Size Register (LSB) */
+ { 0x06, 0x00 }, /* Vertical Panel Size Register (MSB) */
+ { 0x07, 0x00 }, /* FPLINE Start Position Register */
+ { 0x08, 0x00 }, /* Horizontal Non-Display Period Register */
+ { 0x09, 0x00 }, /* FPFRAME Start Position Register */
+ { 0x0A, 0x02 }, /* Vertical Non-Display Period Register */
+ { 0x0B, 0x00 }, /* MOD Rate Register */
+ { 0x0C, 0x00 }, /* Screen 1 Start Address Register (LSB) */
+ { 0x0D, 0x00 }, /* Screen 1 Start Address Register (MSB) */
+ { 0x0E, 0x00 }, /* Not Used */
+ { 0x0F, 0x00 }, /* Screen 2 Start Address Register (LSB) */
+ { 0x10, 0x00 }, /* Screen 2 Start Address Register (MSB) */
+ { 0x11, 0x00 }, /* Not Used */
+ { 0x12, 0x00 }, /* Memory Address Offset Register */
+ { 0x13, 0xFF }, /* Screen 1 Vertical Size Register (LSB) */
+ { 0x14, 0x03 }, /* Screen 1 Vertical Size Register (MSB) */
+ { 0x15, 0x00 }, /* Look-Up Table Address Register */
+ { 0x16, 0x00 }, /* Look-Up Table Bank Select Register */
+ { 0x17, 0x00 }, /* Look-Up Table Data Register */
+ { 0x18, 0x01 }, /* GPIO Configuration Control Register */
+ { 0x19, 0x01 }, /* GPIO Status/Control Register */
+ { 0x1A, 0x00 }, /* Scratch Pad Register */
+ { 0x1B, 0x00 }, /* SwivelView Mode Register */
+ { 0x1C, 0xA0 }, /* Line Byte Count Register */
+ { 0x1D, 0x00 }, /* Not Used */
+ { 0x1E, 0x00 }, /* Not Used */
+ { 0x1F, 0x00 }, /* Not Used */
+};
--- /dev/null
+/*
+ *
+ * Generic Header information generated by 13704CFG.EXE (Build 10)
+ *
+ * Copyright (c) 2000,2001 Epson Research and Development, Inc.
+ * All rights reserved.
+ *
+ * Panel: 320x240x8bpp 78Hz Mono 8-Bit STN, Disabled (PCLK=6.666MHz)
+ *
+ * This file defines the configuration environment and registers,
+ * which can be used by any software, such as display drivers.
+ *
+ * PLEASE NOTE: If you FTP this file to a non-Windows platform, make
+ * sure you transfer this file using ASCII, not BINARY
+ * mode.
+ *
+ */
+
+static S1D_REGS regs_13705_320_240_8bpp[] =
+{
+ { 0x00, 0x00 }, /* Revision Code Register */
+ { 0x01, 0x23 }, /* Mode Register 0 Register */
+ { 0x02, 0xE0 }, /* Mode Register 1 Register */
+ { 0x03, 0x03 }, /* Mode Register 2 Register - bit7 is LUT bypass */
+ { 0x04, 0x27 }, /* Horizontal Panel Size Register */
+ { 0x05, 0xEF }, /* Vertical Panel Size Register (LSB) */
+ { 0x06, 0x00 }, /* Vertical Panel Size Register (MSB) */
+ { 0x07, 0x00 }, /* FPLINE Start Position Register */
+ { 0x08, 0x00 }, /* Horizontal Non-Display Period Register */
+ { 0x09, 0x01 }, /* FPFRAME Start Position Register */
+ { 0x0A, 0x02 }, /* Vertical Non-Display Period Register */
+ { 0x0B, 0x00 }, /* MOD Rate Register */
+ { 0x0C, 0x00 }, /* Screen 1 Start Address Register (LSB) */
+ { 0x0D, 0x00 }, /* Screen 1 Start Address Register (MSB) */
+ { 0x0E, 0x00 }, /* Not Used */
+ { 0x0F, 0x00 }, /* Screen 2 Start Address Register (LSB) */
+ { 0x10, 0x00 }, /* Screen 2 Start Address Register (MSB) */
+ { 0x11, 0x00 }, /* Not Used */
+ { 0x12, 0x00 }, /* Memory Address Offset Register */
+ { 0x13, 0xFF }, /* Screen 1 Vertical Size Register (LSB) */
+ { 0x14, 0x03 }, /* Screen 1 Vertical Size Register (MSB) */
+ { 0x15, 0x00 }, /* Look-Up Table Address Register */
+ { 0x16, 0x00 }, /* Look-Up Table Bank Select Register */
+ { 0x17, 0x00 }, /* Look-Up Table Data Register */
+ { 0x18, 0x01 }, /* GPIO Configuration Control Register */
+ { 0x19, 0x01 }, /* GPIO Status/Control Register */
+ { 0x1A, 0x00 }, /* Scratch Pad Register */
+ { 0x1B, 0x00 }, /* SwivelView Mode Register */
+ { 0x1C, 0xFF }, /* Line Byte Count Register */
+ { 0x1D, 0x00 }, /* Not Used */
+ { 0x1E, 0x00 }, /* Not Used */
+ { 0x1F, 0x00 }, /* Not Used */
+};
--- /dev/null
+/*
+ *
+ * File generated by S1D13806CFG.EXE
+ *
+ * Copyright (c) 2000,2001 Epson Research and Development, Inc.
+ * All rights reserved.
+ *
+ * PLEASE NOTE: If you FTP this file to a non-Windows platform, make
+ * sure you transfer this file using ASCII, not BINARY mode.
+ *
+ * Panel: (active) 1024x768 34Hz TFT Single 12-bit (PCLK=BUSCLK=33.333MHz)
+ * Memory: Embedded SDRAM (MCLK=CLKI=49.100MHz) (BUSCLK=33.333MHz)
+ *
+ */
+
+static S1D_REGS regs_13806_1024_768_8bpp[] =
+{
+ {0x0001,0x00}, /* Miscellaneous Register */
+ {0x01FC,0x00}, /* Display Mode Register */
+ {0x0004,0x00}, /* General IO Pins Configuration Register 0 */
+ {0x0005,0x00}, /* General IO Pins Configuration Register 1 */
+ {0x0008,0x00}, /* General IO Pins Control Register 0 */
+ {0x0009,0x00}, /* General IO Pins Control Register 1 */
+ {0x0010,0x00}, /* Memory Clock Configuration Register */
+ {0x0014,0x01}, /* LCD Pixel Clock Configuration Register */
+ {0x0018,0x00}, /* CRT/TV Pixel Clock Configuration Register */
+ {0x001C,0x02}, /* MediaPlug Clock Configuration Register */
+ {0x001E,0x01}, /* CPU To Memory Wait State Select Register */
+ {0x0021,0x03}, /* DRAM Refresh Rate Register */
+ {0x002A,0x00}, /* DRAM Timings Control Register 0 */
+ {0x002B,0x01}, /* DRAM Timings Control Register 1 */
+ {0x0020,0x80}, /* Memory Configuration Register */
+ {0x0030,0x55}, /* Panel Type Register */
+ {0x0031,0x00}, /* MOD Rate Register */
+ {0x0032,0x7F}, /* LCD Horizontal Display Width Register */
+ {0x0034,0x12}, /* LCD Horizontal Non-Display Period Register */
+ {0x0035,0x01}, /* TFT FPLINE Start Position Register */
+ {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */
+ {0x0038,0xFF}, /* LCD Vertical Display Height Register 0 */
+ {0x0039,0x02}, /* LCD Vertical Display Height Register 1 */
+ {0x003A,0x2C}, /* LCD Vertical Non-Display Period Register */
+ {0x003B,0x0A}, /* TFT FPFRAME Start Position Register */
+ {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */
+ {0x0040,0x03}, /* LCD Display Mode Register */
+ {0x0041,0x00}, /* LCD Miscellaneous Register */
+ {0x0042,0x00}, /* LCD Display Start Address Register 0 */
+ {0x0043,0x00}, /* LCD Display Start Address Register 1 */
+ {0x0044,0x00}, /* LCD Display Start Address Register 2 */
+ {0x0046,0x00}, /* LCD Memory Address Offset Register 0 */
+ {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */
+ {0x0048,0x00}, /* LCD Pixel Panning Register */
+ {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */
+ {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */
+ {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */
+ {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */
+ {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */
+ {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */
+ {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */
+ {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */
+ {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */
+ {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */
+ {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */
+ {0x005B,0x10}, /* TV Output Control Register */
+ {0x0060,0x03}, /* CRT/TV Display Mode Register */
+ {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */
+ {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */
+ {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */
+ {0x0066,0x40}, /* CRT/TV Memory Address Offset Register 0 */
+ {0x0067,0x01}, /* CRT/TV Memory Address Offset Register 1 */
+ {0x0068,0x00}, /* CRT/TV Pixel Panning Register */
+ {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */
+ {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */
+ {0x0070,0x00}, /* LCD Ink/Cursor Control Register */
+ {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */
+ {0x0072,0x00}, /* LCD Cursor X Position Register 0 */
+ {0x0073,0x00}, /* LCD Cursor X Position Register 1 */
+ {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */
+ {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */
+ {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */
+ {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */
+ {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */
+ {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */
+ {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */
+ {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */
+ {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */
+ {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */
+ {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */
+ {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */
+ {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */
+ {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */
+ {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */
+ {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */
+ {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */
+ {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */
+ {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */
+ {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */
+ {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */
+ {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */
+ {0x0100,0x00}, /* BitBlt Control Register 0 */
+ {0x0101,0x00}, /* BitBlt Control Register 1 */
+ {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */
+ {0x0103,0x00}, /* BitBlt Operation Register */
+ {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */
+ {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */
+ {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */
+ {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */
+ {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */
+ {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */
+ {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */
+ {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */
+ {0x0110,0x00}, /* BitBlt Width Register 0 */
+ {0x0111,0x00}, /* BitBlt Width Register 1 */
+ {0x0112,0x00}, /* BitBlt Height Register 0 */
+ {0x0113,0x00}, /* BitBlt Height Register 1 */
+ {0x0114,0x00}, /* BitBlt Background Color Register 0 */
+ {0x0115,0x00}, /* BitBlt Background Color Register 1 */
+ {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */
+ {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */
+ {0x01E0,0x00}, /* Look-Up Table Mode Register */
+ {0x01E2,0x00}, /* Look-Up Table Address Register */
+ {0x01F0,0x10}, /* Power Save Configuration Register */
+ {0x01F1,0x00}, /* Power Save Status Register */
+ {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */
+ {0x01FC,0x01}, /* Display Mode Register */
+};
+
--- /dev/null
+/*
+ *
+ * File generated by S1D13806CFG.EXE
+ *
+ * Copyright (c) 2000,2001 Epson Research and Development, Inc.
+ * All rights reserved.
+ *
+ * PLEASE NOTE: If you FTP this file to a non-Windows platform, make
+ * sure you transfer this file using ASCII, not BINARY mode.
+ *
+ * Panel: (active) 320x240 62Hz STN Single 4-bit (PCLK=CLKI2/4=6.250MHz)
+ * Memory: Embedded SDRAM (MCLK=CLKI=49.500MHz) (BUSCLK=33.333MHz)
+ *
+ */
+
+static S1D_REGS regs_13806_320_240_4bpp[] =
+{
+ {0x0001,0x00}, /* Miscellaneous Register */
+ {0x01FC,0x00}, /* Display Mode Register */
+ {0x0004,0x08}, /* General IO Pins Configuration Register 0 */
+ {0x0005,0x08}, /* General IO Pins Configuration Register 1 */
+ {0x0008,0x08}, /* General IO Pins Control Register 0 */
+ {0x0009,0x00}, /* General IO Pins Control Register 1 */
+ {0x0010,0x00}, /* Memory Clock Configuration Register */
+ {0x0014,0x32}, /* LCD Pixel Clock Configuration Register */
+ {0x0018,0x00}, /* CRT/TV Pixel Clock Configuration Register */
+ {0x001C,0x02}, /* MediaPlug Clock Configuration Register */
+ {0x001E,0x01}, /* CPU To Memory Wait State Select Register */
+ {0x0021,0x03}, /* DRAM Refresh Rate Register */
+ {0x002A,0x00}, /* DRAM Timings Control Register 0 */
+ {0x002B,0x01}, /* DRAM Timings Control Register 1 */
+ {0x0020,0x80}, /* Memory Configuration Register */
+ {0x0030,0x00}, /* Panel Type Register */
+ {0x0031,0x00}, /* MOD Rate Register */
+ {0x0032,0x27}, /* LCD Horizontal Display Width Register */
+ {0x0034,0x03}, /* LCD Horizontal Non-Display Period Register */
+ {0x0035,0x01}, /* TFT FPLINE Start Position Register */
+ {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */
+ {0x0038,0xEF}, /* LCD Vertical Display Height Register 0 */
+ {0x0039,0x00}, /* LCD Vertical Display Height Register 1 */
+ {0x003A,0x2C}, /* LCD Vertical Non-Display Period Register */
+ {0x003B,0x0A}, /* TFT FPFRAME Start Position Register */
+ {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */
+ {0x0040,0x02}, /* LCD Display Mode Register */
+ {0x0041,0x00}, /* LCD Miscellaneous Register */
+ {0x0042,0x00}, /* LCD Display Start Address Register 0 */
+ {0x0043,0x00}, /* LCD Display Start Address Register 1 */
+ {0x0044,0x00}, /* LCD Display Start Address Register 2 */
+ {0x0046,0x50}, /* LCD Memory Address Offset Register 0 */
+ {0x0047,0x00}, /* LCD Memory Address Offset Register 1 */
+ {0x0048,0x00}, /* LCD Pixel Panning Register */
+ {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */
+ {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */
+ {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */
+ {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */
+ {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */
+ {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */
+ {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */
+ {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */
+ {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */
+ {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */
+ {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */
+ {0x005B,0x10}, /* TV Output Control Register */
+ {0x0060,0x03}, /* CRT/TV Display Mode Register */
+ {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */
+ {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */
+ {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */
+ {0x0066,0x40}, /* CRT/TV Memory Address Offset Register 0 */
+ {0x0067,0x01}, /* CRT/TV Memory Address Offset Register 1 */
+ {0x0068,0x00}, /* CRT/TV Pixel Panning Register */
+ {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */
+ {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */
+ {0x0070,0x00}, /* LCD Ink/Cursor Control Register */
+ {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */
+ {0x0072,0x00}, /* LCD Cursor X Position Register 0 */
+ {0x0073,0x00}, /* LCD Cursor X Position Register 1 */
+ {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */
+ {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */
+ {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */
+ {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */
+ {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */
+ {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */
+ {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */
+ {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */
+ {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */
+ {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */
+ {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */
+ {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */
+ {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */
+ {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */
+ {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */
+ {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */
+ {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */
+ {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */
+ {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */
+ {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */
+ {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */
+ {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */
+ {0x0100,0x00}, /* BitBlt Control Register 0 */
+ {0x0101,0x00}, /* BitBlt Control Register 1 */
+ {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */
+ {0x0103,0x00}, /* BitBlt Operation Register */
+ {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */
+ {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */
+ {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */
+ {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */
+ {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */
+ {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */
+ {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */
+ {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */
+ {0x0110,0x00}, /* BitBlt Width Register 0 */
+ {0x0111,0x00}, /* BitBlt Width Register 1 */
+ {0x0112,0x00}, /* BitBlt Height Register 0 */
+ {0x0113,0x00}, /* BitBlt Height Register 1 */
+ {0x0114,0x00}, /* BitBlt Background Color Register 0 */
+ {0x0115,0x00}, /* BitBlt Background Color Register 1 */
+ {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */
+ {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */
+ {0x01E0,0x00}, /* Look-Up Table Mode Register */
+ {0x01E2,0x00}, /* Look-Up Table Address Register */
+ {0x01F0,0x10}, /* Power Save Configuration Register */
+ {0x01F1,0x00}, /* Power Save Status Register */
+ {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */
+ {0x01FC,0x01}, /* Display Mode Register */
+};
+
--- /dev/null
+/*
+ *
+ * File generated by S1D13806CFG.EXE
+ *
+ * Copyright (c) 2000,2001 Epson Research and Development, Inc.
+ * All rights reserved.
+ *
+ * PLEASE NOTE: If you FTP this file to a non-Windows platform, make
+ * sure you transfer this file using ASCII, not BINARY mode.
+ *
+ * Panel: (active) 640x480 59Hz TFT Single 18-bit (PCLK=CLKI2=25.000MHz)
+ * Memory: Embedded SDRAM (MCLK=CLKI=49.152MHz) (BUSCLK=33.333MHz)
+ *
+ */
+
+static S1D_REGS regs_13806_640_480_16bpp[] =
+{
+ {0x0001,0x00}, /* Miscellaneous Register */
+ {0x01FC,0x00}, /* Display Mode Register */
+ {0x0004,0x18}, /* General IO Pins Configuration Register 0 */
+ {0x0005,0x00}, /* General IO Pins Configuration Register 1 */
+ {0x0008,0x18}, /* General IO Pins Control Register 0 */
+ {0x0009,0x00}, /* General IO Pins Control Register 1 */
+ {0x0010,0x00}, /* Memory Clock Configuration Register */
+ {0x0014,0x02}, /* LCD Pixel Clock Configuration Register */
+ {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */
+ {0x001C,0x02}, /* MediaPlug Clock Configuration Register */
+ {0x001E,0x01}, /* CPU To Memory Wait State Select Register */
+ {0x0021,0x03}, /* DRAM Refresh Rate Register */
+ {0x002A,0x00}, /* DRAM Timings Control Register 0 */
+ {0x002B,0x01}, /* DRAM Timings Control Register 1 */
+ {0x0020,0x80}, /* Memory Configuration Register */
+ {0x0030,0x25}, /* Panel Type Register */
+ {0x0031,0x00}, /* MOD Rate Register */
+ {0x0032,0x4F}, /* LCD Horizontal Display Width Register */
+ {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */
+ {0x0035,0x00}, /* TFT FPLINE Start Position Register */
+ {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */
+ {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */
+ {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */
+ {0x003A,0x24}, /* LCD Vertical Non-Display Period Register */
+ {0x003B,0x00}, /* TFT FPFRAME Start Position Register */
+ {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */
+ {0x0040,0x05}, /* LCD Display Mode Register */
+ {0x0041,0x00}, /* LCD Miscellaneous Register */
+ {0x0042,0x00}, /* LCD Display Start Address Register 0 */
+ {0x0043,0x00}, /* LCD Display Start Address Register 1 */
+ {0x0044,0x00}, /* LCD Display Start Address Register 2 */
+ {0x0046,0x80}, /* LCD Memory Address Offset Register 0 */
+ {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */
+ {0x0048,0x00}, /* LCD Pixel Panning Register */
+ {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */
+ {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */
+ {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */
+ {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */
+ {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */
+ {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */
+ {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */
+ {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */
+ {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */
+ {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */
+ {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */
+ {0x005B,0x10}, /* TV Output Control Register */
+ {0x0060,0x05}, /* CRT/TV Display Mode Register */
+ {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */
+ {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */
+ {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */
+ {0x0066,0x80}, /* CRT/TV Memory Address Offset Register 0 */
+ {0x0067,0x02}, /* CRT/TV Memory Address Offset Register 1 */
+ {0x0068,0x00}, /* CRT/TV Pixel Panning Register */
+ {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */
+ {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */
+ {0x0070,0x00}, /* LCD Ink/Cursor Control Register */
+ {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */
+ {0x0072,0x00}, /* LCD Cursor X Position Register 0 */
+ {0x0073,0x00}, /* LCD Cursor X Position Register 1 */
+ {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */
+ {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */
+ {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */
+ {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */
+ {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */
+ {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */
+ {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */
+ {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */
+ {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */
+ {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */
+ {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */
+ {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */
+ {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */
+ {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */
+ {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */
+ {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */
+ {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */
+ {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */
+ {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */
+ {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */
+ {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */
+ {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */
+ {0x0100,0x00}, /* BitBlt Control Register 0 */
+ {0x0101,0x00}, /* BitBlt Control Register 1 */
+ {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */
+ {0x0103,0x00}, /* BitBlt Operation Register */
+ {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */
+ {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */
+ {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */
+ {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */
+ {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */
+ {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */
+ {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */
+ {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */
+ {0x0110,0x00}, /* BitBlt Width Register 0 */
+ {0x0111,0x00}, /* BitBlt Width Register 1 */
+ {0x0112,0x00}, /* BitBlt Height Register 0 */
+ {0x0113,0x00}, /* BitBlt Height Register 1 */
+ {0x0114,0x00}, /* BitBlt Background Color Register 0 */
+ {0x0115,0x00}, /* BitBlt Background Color Register 1 */
+ {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */
+ {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */
+ {0x01E0,0x00}, /* Look-Up Table Mode Register */
+ {0x01E2,0x00}, /* Look-Up Table Address Register */
+ {0x01F0,0x10}, /* Power Save Configuration Register */
+ {0x01F1,0x00}, /* Power Save Status Register */
+ {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */
+ {0x01FC,0x01}, /* Display Mode Register */
+};
+
--- /dev/null
+/*
+ *
+ * File generated by S1D13806CFG.EXE
+ *
+ * Copyright (c) 2000,2001 Epson Research and Development, Inc.
+ * All rights reserved.
+ *
+ * PLEASE NOTE: If you FTP this file to a non-Windows platform, make
+ * sure you transfer this file using ASCII, not BINARY mode.
+ *
+ * Panel: (active) 640x480 59Hz TFT Single 18-bit (PCLK=CLKI2=25.000MHz)
+ * Memory: Embedded SDRAM (MCLK=CLKI=49.152MHz) (BUSCLK=33.333MHz)
+ *
+ */
+
+static S1D_REGS regs_13806_640_320_16bpp[] =
+{
+ {0x0001,0x00}, /* Miscellaneous Register */
+ {0x01FC,0x00}, /* Display Mode Register */
+ {0x0004,0x18}, /* General IO Pins Configuration Register 0 */
+ {0x0005,0x00}, /* General IO Pins Configuration Register 1 */
+ {0x0008,0x18}, /* General IO Pins Control Register 0 */
+ {0x0009,0x00}, /* General IO Pins Control Register 1 */
+ {0x0010,0x00}, /* Memory Clock Configuration Register */
+ {0x0014,0x02}, /* LCD Pixel Clock Configuration Register */
+ {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */
+ {0x001C,0x02}, /* MediaPlug Clock Configuration Register */
+ {0x001E,0x01}, /* CPU To Memory Wait State Select Register */
+ {0x0021,0x03}, /* DRAM Refresh Rate Register */
+ {0x002A,0x00}, /* DRAM Timings Control Register 0 */
+ {0x002B,0x01}, /* DRAM Timings Control Register 1 */
+ {0x0020,0x80}, /* Memory Configuration Register */
+ {0x0030,0x25}, /* Panel Type Register */
+ {0x0031,0x00}, /* MOD Rate Register */
+ {0x0032,0x4F}, /* LCD Horizontal Display Width Register */
+ {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */
+ {0x0035,0x00}, /* TFT FPLINE Start Position Register */
+ {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */
+ {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */
+ {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */
+ {0x003A,0x24}, /* LCD Vertical Non-Display Period Register */
+ {0x003B,0x00}, /* TFT FPFRAME Start Position Register */
+ {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */
+ {0x0040,0x03}, /* LCD Display Mode Register (8bpp) */
+ {0x0041,0x00}, /* LCD Miscellaneous Register */
+ {0x0042,0x00}, /* LCD Display Start Address Register 0 */
+ {0x0043,0x00}, /* LCD Display Start Address Register 1 */
+ {0x0044,0x00}, /* LCD Display Start Address Register 2 */
+ {0x0046,0x80}, /* LCD Memory Address Offset Register 0 */
+ {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */
+ {0x0048,0x00}, /* LCD Pixel Panning Register */
+ {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */
+ {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */
+ {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */
+ {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */
+ {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */
+ {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */
+ {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */
+ {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */
+ {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */
+ {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */
+ {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */
+ {0x005B,0x10}, /* TV Output Control Register */
+ {0x0060,0x05}, /* CRT/TV Display Mode Register */
+ {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */
+ {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */
+ {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */
+ {0x0066,0x80}, /* CRT/TV Memory Address Offset Register 0 */
+ {0x0067,0x02}, /* CRT/TV Memory Address Offset Register 1 */
+ {0x0068,0x00}, /* CRT/TV Pixel Panning Register */
+ {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */
+ {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */
+ {0x0070,0x00}, /* LCD Ink/Cursor Control Register */
+ {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */
+ {0x0072,0x00}, /* LCD Cursor X Position Register 0 */
+ {0x0073,0x00}, /* LCD Cursor X Position Register 1 */
+ {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */
+ {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */
+ {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */
+ {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */
+ {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */
+ {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */
+ {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */
+ {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */
+ {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */
+ {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */
+ {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */
+ {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */
+ {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */
+ {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */
+ {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */
+ {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */
+ {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */
+ {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */
+ {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */
+ {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */
+ {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */
+ {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */
+ {0x0100,0x00}, /* BitBlt Control Register 0 */
+ {0x0101,0x00}, /* BitBlt Control Register 1 */
+ {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */
+ {0x0103,0x00}, /* BitBlt Operation Register */
+ {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */
+ {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */
+ {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */
+ {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */
+ {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */
+ {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */
+ {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */
+ {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */
+ {0x0110,0x00}, /* BitBlt Width Register 0 */
+ {0x0111,0x00}, /* BitBlt Width Register 1 */
+ {0x0112,0x00}, /* BitBlt Height Register 0 */
+ {0x0113,0x00}, /* BitBlt Height Register 1 */
+ {0x0114,0x00}, /* BitBlt Background Color Register 0 */
+ {0x0115,0x00}, /* BitBlt Background Color Register 1 */
+ {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */
+ {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */
+ {0x01E0,0x00}, /* Look-Up Table Mode Register */
+ {0x01E2,0x00}, /* Look-Up Table Address Register */
+ {0x01F0,0x10}, /* Power Save Configuration Register */
+ {0x01F1,0x00}, /* Power Save Status Register */
+ {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */
+ {0x01FC,0x01}, /* Display Mode Register */
+};
+
projects / u-boot.git / commitdiff