power: axp209: Use BIT() macro

Use the standard BIT() macro for bitfield definitions in headers.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Priit Laes <plaes@plaes.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

diff --git a/include/axp209.h b/include/axp209.h
index b7de6ed73ca9117ea281746408234d212aac62ff..3a4fc281960133de8f36f23b006bb3aa7e90fd40 100644 (file)
--- a/include/axp209.h
+++ b/include/axp209.h
@@ -3,6 +3,8 @@
  * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
  */
 
+#include <linux/bitops.h>
+
 enum axp209_reg {
        AXP209_POWER_STATUS = 0x00,
        AXP209_CHIP_VERSION = 0x03,
@@ -20,29 +22,29 @@ enum axp209_reg {
        AXP209_SHUTDOWN = 0x32,
 };
 
-#define AXP209_POWER_STATUS_ON_BY_DC   (1 << 0)
-#define AXP209_POWER_STATUS_VBUS_USABLE        (1 << 4)
+#define AXP209_POWER_STATUS_ON_BY_DC   BIT(0)
+#define AXP209_POWER_STATUS_VBUS_USABLE        BIT(4)
 
-#define AXP209_OUTPUT_CTRL_EXTEN       (1 << 0)
-#define AXP209_OUTPUT_CTRL_DCDC3       (1 << 1)
-#define AXP209_OUTPUT_CTRL_LDO2                (1 << 2)
-#define AXP209_OUTPUT_CTRL_LDO4                (1 << 3)
-#define AXP209_OUTPUT_CTRL_DCDC2       (1 << 4)
-#define AXP209_OUTPUT_CTRL_LDO3                (1 << 6)
+#define AXP209_OUTPUT_CTRL_EXTEN       BIT(0)
+#define AXP209_OUTPUT_CTRL_DCDC3       BIT(1)
+#define AXP209_OUTPUT_CTRL_LDO2                BIT(2)
+#define AXP209_OUTPUT_CTRL_LDO4                BIT(3)
+#define AXP209_OUTPUT_CTRL_DCDC2       BIT(4)
+#define AXP209_OUTPUT_CTRL_LDO3                BIT(6)
 
-#define AXP209_IRQ5_PEK_UP             (1 << 6)
-#define AXP209_IRQ5_PEK_DOWN           (1 << 5)
+#define AXP209_IRQ5_PEK_UP             BIT(6)
+#define AXP209_IRQ5_PEK_DOWN           BIT(5)
 
-#define AXP209_POWEROFF                        (1 << 7)
+#define AXP209_POWEROFF                        BIT(7)
 
 /* For axp_gpio.c */
 #define AXP_POWER_STATUS               0x00
-#define AXP_POWER_STATUS_VBUS_PRESENT          (1 << 5)
+#define AXP_POWER_STATUS_VBUS_PRESENT  BIT(5)
 #define AXP_GPIO0_CTRL                 0x90
 #define AXP_GPIO1_CTRL                 0x92
 #define AXP_GPIO2_CTRL                 0x93
-#define AXP_GPIO_CTRL_OUTPUT_LOW               0x00 /* Drive pin low */
-#define AXP_GPIO_CTRL_OUTPUT_HIGH              0x01 /* Drive pin high */
-#define AXP_GPIO_CTRL_INPUT                    0x02 /* Input */
+#define AXP_GPIO_CTRL_OUTPUT_LOW       0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH      0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT            0x02 /* Input */
 #define AXP_GPIO_STATE                 0x94
-#define AXP_GPIO_STATE_OFFSET                  4
+#define AXP_GPIO_STATE_OFFSET          4