dtb-$(CONFIG_ARCH_MESON) += \
meson-a1-ad401.dtb \
- meson-axg-s400.dtb \
- meson-axg-jethome-jethub-j100.dtb \
- meson-gxl-s805x-libretech-ac.dtb \
- meson-gxl-s905d-libretech-pc.dtb \
- meson-gxl-s905w-jethome-jethub-j80.dtb \
- meson-gxl-s905x-khadas-vim.dtb \
- meson-gxl-s905x-libretech-cc.dtb \
- meson-gxl-s905x-libretech-cc-v2.dtb \
- meson-gxl-s905x-p212.dtb \
- meson-gxm-gt1-ultimate.dtb \
- meson-gxm-khadas-vim2.dtb \
- meson-gxm-s912-libretech-pc.dtb \
- meson-gxm-wetek-core2.dtb \
meson-g12a-radxa-zero.dtb \
meson-g12a-sei510.dtb \
meson-g12a-u200.dtb \
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
- * Copyright (c) 2020 JetHome
- * Author: Aleksandr Kazantsev <ak@tvip.ru>
- * Author: Alexey Shevelkin <ash@tvip.ru>
- * Author: Vyacheslav Bocharov <adeep@lexina.in>
- */
-
-/dts-v1/;
-
-#include "meson-axg.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg";
- model = "JetHome JetHub J100";
- aliases {
- serial0 = &uart_AO; /* Console */
- serial1 = &uart_AO_B; /* External UART (Wireless Module) */
- ethernet0 = ðmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- /* 1024MB RAM */
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- reserved-memory {
- linux,cma {
- size = <0x0 0x400000>;
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_5v>;
- regulator-always-on;
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddio_boot: regulator-vddio_boot {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- usb_pwr: regulator-usb_pwr {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
- regulator-always-on;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
- };
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&scpi_sensors 0>;
- trips {
- cpu_passive: cpu-passive {
- temperature = <70000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- cpu_hot: cpu-hot {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "hot";
- };
-
- cpu_critical: cpu-critical {
- temperature = <100000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
- };
-
- cpu_cooling_maps: cooling-maps {
- map0 {
- trip = <&cpu_passive>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- map1 {
- trip = <&cpu_hot>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- onewire {
- compatible = "w1-gpio";
- gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
- #gpio-cells = <1>;
- };
-};
-
-&efuse {
- sn: sn@32 {
- reg = <0x32 0x20>;
- };
-
- eth_mac: eth_mac@0 {
- reg = <0x0 0x6>;
- };
-
- bt_mac: bt_mac@6 {
- reg = <0x6 0x6>;
- };
-
- wifi_mac: wifi_mac@c {
- reg = <0xc 0x6>;
- };
-
- bid: bid@12 {
- reg = <0x12 0x20>;
- };
-};
-
-ðmac {
- status = "okay";
- pinctrl-0 = <ð_rmii_x_pins>;
- pinctrl-names = "default";
- phy-handle = <ð_phy0>;
- phy-mode = "rmii";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
- eth_phy0: ethernet-phy@0 {
- /* compatible = "ethernet-phy-id0243.0c54";*/
- max-speed = <100>;
- reg = <0>;
-
- reset-assert-us = <10000>;
- reset-deassert-us = <10000>;
- reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-/* Internal I2C bus (on CPU module) */
-&i2c1 {
- status = "okay";
- pinctrl-0 = <&i2c1_z_pins>;
- pinctrl-names = "default";
-
- /* RTC */
- pcf8563: pcf8563@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- status = "okay";
- };
-};
-
-/* Peripheral I2C bus (on motherboard) */
-&i2c_AO {
- status = "okay";
- pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_ab {
- status = "okay";
- pinctrl-0 = <&pwm_a_x20_pins>;
- pinctrl-names = "default";
-};
-
-/* wifi module */
-&sd_emmc_b {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- sd-uhs-sdr104;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* emmc storage */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
-
- mmc-pwrseq = <&emmc_pwrseq>;
-
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/* UART Bluetooth */
-&uart_B {
- status = "okay";
- pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
- };
-};
-
-/* UART Console */
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-/* UART Wireless module */
-&uart_AO_B {
- status = "okay";
- pinctrl-0 = <&uart_ao_b_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- phy-supply = <&usb_pwr>;
-};
-
-&spicc1 {
- status = "okay";
- pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
- pinctrl-names = "default";
-};
-
-&gpio {
- gpio-line-names =
- "", "", "", "", "", // 0 - 4
- "", "", "", "", "", // 5 - 9
- "UserButton", "", "", "", "", // 10 - 14
- "", "", "", "", "", // 15 - 19
- "", "", "", "", "", // 20 - 24
- "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
- "Output1", "", "", "", "", // 30 - 34
- "", "ZigBeeBOOT", "", "", "", // 35 - 39
- "", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
- "Input2", "Input1", "", "", "", // 45 - 49
- "", "", "", "", "", // 50 - 54
- "", "", "", "", "", // 55 - 59
- "", "", "", "", "", // 60 - 64
- "", "", "", "", "", // 65 - 69
- "", "", "", "", "", // 70 - 74
- "", "", "", "", "", // 75 - 79
- "", "", "", "", "", // 80 - 84
- "", ""; // 85-86
-};
-
-&cpu0 {
- #cooling-cells = <2>;
-};
-
-&cpu1 {
- #cooling-cells = <2>;
-};
-
-&cpu2 {
- #cooling-cells = <2>;
-};
-
-&cpu3 {
- #cooling-cells = <2>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "meson-axg.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
- model = "Amlogic Meson AXG S400 Development Board";
-
- adc_keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
-
- button-next {
- label = "Next";
- linux,code = <KEY_NEXT>;
- press-threshold-microvolt = <1116000>; /* 62% */
- };
-
- button-prev {
- label = "Previous";
- linux,code = <KEY_PREVIOUS>;
- press-threshold-microvolt = <900000>; /* 50% */
- };
-
- button-wifi {
- label = "Wifi";
- linux,code = <KEY_WLAN>;
- press-threshold-microvolt = <684000>; /* 38% */
- };
-
- button-up {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- press-threshold-microvolt = <468000>; /* 26% */
- };
-
- button-down {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- press-threshold-microvolt = <252000>; /* 14% */
- };
-
- button-voice {
- label = "Voice";
- linux,code = <KEY_VOICECOMMAND>;
- press-threshold-microvolt = <0>; /* 0% */
- };
- };
-
- aliases {
- serial0 = &uart_AO;
- serial1 = &uart_A;
- };
-
- linein: audio-codec-0 {
- #sound-dai-cells = <0>;
- compatible = "everest,es7241";
- VDDA-supply = <&vcc_3v3>;
- VDDP-supply = <&vcc_3v3>;
- VDDD-supply = <&vcc_3v3>;
- status = "okay";
- sound-name-prefix = "Linein";
- };
-
- lineout: audio-codec-1 {
- #sound-dai-cells = <0>;
- compatible = "everest,es7154";
- VDD-supply = <&vcc_3v3>;
- PVDD-supply = <&vcc_5v>;
- status = "okay";
- sound-name-prefix = "Lineout";
- };
-
- spdif_dit: audio-codec-2 {
- #sound-dai-cells = <0>;
- compatible = "linux,spdif-dit";
- status = "okay";
- sound-name-prefix = "DIT";
- };
-
- dmics: audio-codec-3 {
- #sound-dai-cells = <0>;
- compatible = "dmic-codec";
- num-channels = <7>;
- wakeup-delay-ms = <50>;
- status = "okay";
- sound-name-prefix = "MIC";
- };
-
- spdif_dir: audio-codec-4 {
- #sound-dai-cells = <0>;
- compatible = "linux,spdif-dir";
- status = "okay";
- sound-name-prefix = "DIR";
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- main_12v: regulator-main_12v {
- compatible = "regulator-fixed";
- regulator-name = "12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&main_12v>;
-
- gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&main_12v>;
- regulator-always-on;
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddio_boot: regulator-vddio_boot {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- usb_pwr: regulator-usb_pwr {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- speaker-leds {
- compatible = "gpio-leds";
-
- aled1 {
- label = "speaker:aled1";
- gpios = <&gpio_speaker 7 0>;
- };
-
- aled2 {
- label = "speaker:aled2";
- gpios = <&gpio_speaker 6 0>;
- };
-
- aled3 {
- label = "speaker:aled3";
- gpios = <&gpio_speaker 5 0>;
- };
-
- aled4 {
- label = "speaker:aled4";
- gpios = <&gpio_speaker 4 0>;
- };
-
- aled5 {
- label = "speaker:aled5";
- gpios = <&gpio_speaker 3 0>;
- };
-
- aled6 {
- label = "speaker:aled6";
- gpios = <&gpio_speaker 2 0>;
- };
- };
-
- sound {
- compatible = "amlogic,axg-sound-card";
- model = "AXG-S400";
- audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
- <&tdmin_lb>, <&tdmout_c>;
- audio-widgets = "Line", "Lineout",
- "Line", "Linein",
- "Speaker", "Speaker1 Left",
- "Speaker", "Speaker1 Right";
- audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
- "SPDIFOUT IN 0", "FRDDR_A OUT 3",
- "TDMOUT_C IN 1", "FRDDR_B OUT 2",
- "SPDIFOUT IN 1", "FRDDR_B OUT 3",
- "TDMOUT_C IN 2", "FRDDR_C OUT 2",
- "SPDIFOUT IN 2", "FRDDR_C OUT 3",
- "TDM_C Playback", "TDMOUT_C OUT",
- "TDMIN_A IN 2", "TDM_C Capture",
- "TDMIN_A IN 5", "TDM_C Loopback",
- "TDMIN_B IN 2", "TDM_C Capture",
- "TDMIN_B IN 5", "TDM_C Loopback",
- "TDMIN_C IN 2", "TDM_C Capture",
- "TDMIN_C IN 5", "TDM_C Loopback",
- "TDMIN_LB IN 2", "TDM_C Loopback",
- "TDMIN_LB IN 5", "TDM_C Capture",
- "TODDR_A IN 0", "TDMIN_A OUT",
- "TODDR_B IN 0", "TDMIN_A OUT",
- "TODDR_C IN 0", "TDMIN_A OUT",
- "TODDR_A IN 1", "TDMIN_B OUT",
- "TODDR_B IN 1", "TDMIN_B OUT",
- "TODDR_C IN 1", "TDMIN_B OUT",
- "TODDR_A IN 2", "TDMIN_C OUT",
- "TODDR_B IN 2", "TDMIN_C OUT",
- "TODDR_C IN 2", "TDMIN_C OUT",
- "TODDR_A IN 3", "SPDIFIN Capture",
- "TODDR_B IN 3", "SPDIFIN Capture",
- "TODDR_C IN 3", "SPDIFIN Capture",
- "TODDR_A IN 4", "PDM Capture",
- "TODDR_B IN 4", "PDM Capture",
- "TODDR_C IN 4", "PDM Capture",
- "TODDR_A IN 6", "TDMIN_LB OUT",
- "TODDR_B IN 6", "TDMIN_LB OUT",
- "TODDR_C IN 6", "TDMIN_LB OUT",
- "Lineout", "Lineout AOUTL",
- "Lineout", "Lineout AOUTR",
- "Speaker1 Left", "SPK1 OUT_A",
- "Speaker1 Left", "SPK1 OUT_B",
- "Speaker1 Right", "SPK1 OUT_C",
- "Speaker1 Right", "SPK1 OUT_D",
- "Linein AINL", "Linein",
- "Linein AINR", "Linein";
- assigned-clocks = <&clkc CLKID_HIFI_PLL>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <589824000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&frddr_a>;
- };
-
- dai-link-1 {
- sound-dai = <&frddr_b>;
- };
-
- dai-link-2 {
- sound-dai = <&frddr_c>;
- };
-
- dai-link-3 {
- sound-dai = <&toddr_a>;
- };
-
- dai-link-4 {
- sound-dai = <&toddr_b>;
- };
-
- dai-link-5 {
- sound-dai = <&toddr_c>;
- };
-
- dai-link-6 {
- sound-dai = <&tdmif_c>;
- dai-format = "i2s";
- dai-tdm-slot-tx-mask-2 = <1 1>;
- dai-tdm-slot-rx-mask-1 = <1 1>;
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&lineout>;
- };
-
- codec-1 {
- sound-dai = <&speaker_amp1>;
- };
-
- codec-2 {
- sound-dai = <&linein>;
- };
-
- };
-
- dai-link-7 {
- sound-dai = <&spdifout>;
-
- codec {
- sound-dai = <&spdif_dit>;
- };
- };
-
- dai-link-8 {
- sound-dai = <&spdifin>;
-
- codec {
- sound-dai = <&spdif_dir>;
- };
- };
-
- dai-link-9 {
- sound-dai = <&pdm>;
-
- codec {
- sound-dai = <&dmics>;
- };
- };
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
- };
-};
-
-ðmac {
- status = "okay";
- pinctrl-0 = <ð_rgmii_y_pins>;
- pinctrl-names = "default";
- phy-handle = <ð_phy0>;
- phy-mode = "rgmii";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- eth_phy0: ethernet-phy@0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- interrupt-parent = <&gpio_intc>;
- interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
- eee-broken-1000t;
- };
- };
-};
-
-&frddr_a {
- status = "okay";
-};
-
-&frddr_b {
- status = "okay";
-};
-
-&frddr_c {
- status = "okay";
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&i2c1 {
- status = "okay";
- pinctrl-0 = <&i2c1_z_pins>;
- pinctrl-names = "default";
-
- speaker_amp1: audio-codec@1b {
- compatible = "ti,tas5707";
- reg = <0x1b>;
- reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
- #sound-dai-cells = <0>;
- AVDD-supply = <&vcc_3v3>;
- DVDD-supply = <&vcc_3v3>;
- PVDD_A-supply = <&main_12v>;
- PVDD_B-supply = <&main_12v>;
- PVDD_C-supply = <&main_12v>;
- PVDD_D-supply = <&main_12v>;
- sound-name-prefix = "SPK1";
- };
-};
-
-&i2c_AO {
- status = "okay";
- pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
- pinctrl-names = "default";
-
- gpio_speaker: gpio-controller@1f {
- compatible = "nxp,pca9557";
- reg = <0x1f>;
- gpio-controller;
- #gpio-cells = <2>;
- vcc-supply = <&vddao_3v3>;
- };
-};
-
-&pdm {
- pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
- <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&pcieA {
- reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&pcieB {
- reset-gpios = <&gpio GPIOZ_10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
- status = "okay";
-};
-
-&pwm_ab {
- status = "okay";
- pinctrl-0 = <&pwm_a_x20_pins>;
- pinctrl-names = "default";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_ao18>;
-};
-
-/* wifi module */
-&sd_emmc_b {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- sd-uhs-sdr104;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* emmc storage */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
-
- mmc-pwrseq = <&emmc_pwrseq>;
-
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-&spdifin {
- pinctrl-0 = <&spdif_in_a19_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&spdifout {
- pinctrl-0 = <&spdif_out_a20_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&tdmif_a {
- pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
- <&tdma_din0_pins>, <&tdma_dout0_x15_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&tdmif_b {
- pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
- <&tdmb_din3_pins>, <&mclk_b_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&tdmif_c {
- pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
- <&tdmc_din1_pins>, <&tdmc_dout2_pins>,
- <&mclk_c_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&tdmin_a {
- status = "okay";
-};
-
-&tdmin_b {
- status = "okay";
-};
-
-&tdmin_c {
- status = "okay";
-};
-
-&tdmin_lb {
- status = "okay";
-};
-
-&tdmout_c {
- status = "okay";
-};
-
-&toddr_a {
- status = "okay";
-};
-
-&toddr_b {
- status = "okay";
-};
-
-&toddr_c {
- status = "okay";
-};
-
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "otg";
- vbus-supply = <&usb_pwr>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
- */
-
-#include <dt-bindings/clock/axg-aoclkc.h>
-#include <dt-bindings/clock/axg-audio-clkc.h>
-#include <dt-bindings/clock/axg-clkc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/gpio/meson-axg-gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
-#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
-#include <dt-bindings/power/meson-axg-power.h>
-
-/ {
- compatible = "amlogic,meson-axg";
-
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- tdmif_a: audio-controller-0 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_A";
- clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
- <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_b: audio-controller-1 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_B";
- clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
- <&clkc_audio AUD_CLKID_MST_B_SCLK>,
- <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_c: audio-controller-2 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_C";
- clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
- <&clkc_audio AUD_CLKID_MST_C_SCLK>,
- <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- arm-pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
- cpus {
- #address-cells = <0x2>;
- #size-cells = <0x0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 0>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 0>;
- };
-
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x2>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 0>;
- };
-
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x3>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 0>;
- };
-
- l2: l2-cache0 {
- compatible = "cache";
- };
- };
-
- sm: secure-monitor {
- compatible = "amlogic,meson-gxbb-sm";
- };
-
- efuse: efuse {
- compatible = "amlogic,meson-gxbb-efuse";
- clocks = <&clkc CLKID_EFUSE>;
- #address-cells = <1>;
- #size-cells = <1>;
- read-only;
- secure-monitor = <&sm>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* 16 MiB reserved for Hardware ROM Firmware */
- hwrom_reserved: hwrom@0 {
- reg = <0x0 0x0 0x0 0x1000000>;
- no-map;
- };
-
- /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
- secmon_reserved: secmon@5000000 {
- reg = <0x0 0x05000000 0x0 0x300000>;
- no-map;
- };
- };
-
- scpi {
- compatible = "arm,scpi-pre-1.0";
- mboxes = <&mailbox 1 &mailbox 2>;
- shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-
- scpi_clocks: clocks {
- compatible = "arm,scpi-clocks";
-
- scpi_dvfs: clock-controller {
- compatible = "arm,scpi-dvfs-clocks";
- #clock-cells = <1>;
- clock-indices = <0>;
- clock-output-names = "vcpu";
- };
- };
-
- scpi_sensors: sensors {
- compatible = "amlogic,meson-gxbb-scpi-sensors";
- #thermal-sensor-cells = <1>;
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- pcieA: pcie@f9800000 {
- compatible = "amlogic,axg-pcie", "snps,dw-pcie";
- reg = <0x0 0xf9800000 0x0 0x400000>,
- <0x0 0xff646000 0x0 0x2000>,
- <0x0 0xf9f00000 0x0 0x100000>;
- reg-names = "elbi", "cfg", "config";
- interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
- bus-range = <0x0 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x82000000 0 0xf9c00000 0x0 0xf9c00000 0 0x00300000>;
-
- clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_A>, <&clkc CLKID_PCIE_CML_EN0>;
- clock-names = "general", "pclk", "port";
- resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>;
- reset-names = "port", "apb";
- num-lanes = <1>;
- phys = <&pcie_phy>;
- phy-names = "pcie";
- status = "disabled";
- };
-
- pcieB: pcie@fa000000 {
- compatible = "amlogic,axg-pcie", "snps,dw-pcie";
- reg = <0x0 0xfa000000 0x0 0x400000>,
- <0x0 0xff648000 0x0 0x2000>,
- <0x0 0xfa400000 0x0 0x100000>;
- reg-names = "elbi", "cfg", "config";
- interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
- bus-range = <0x0 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x82000000 0 0xfa500000 0x0 0xfa500000 0 0x00300000>;
-
- clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_B>, <&clkc CLKID_PCIE_CML_EN1>;
- clock-names = "general", "pclk", "port";
- resets = <&reset RESET_PCIE_B>, <&reset RESET_PCIE_APB>;
- reset-names = "port", "apb";
- num-lanes = <1>;
- phys = <&pcie_phy>;
- phy-names = "pcie";
- status = "disabled";
- };
-
- usb: usb@ffe09080 {
- compatible = "amlogic,meson-axg-usb-ctrl";
- reg = <0x0 0xffe09080 0x0 0x20>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
- clock-names = "usb_ctrl", "ddr";
- resets = <&reset RESET_USB_OTG>;
-
- dr_mode = "otg";
-
- phys = <&usb2_phy1>;
- phy-names = "usb2-phy1";
-
- dwc2: usb@ff400000 {
- compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
- reg = <0x0 0xff400000 0x0 0x40000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_USB1>;
- clock-names = "otg";
- phys = <&usb2_phy1>;
- dr_mode = "peripheral";
- g-rx-fifo-size = <192>;
- g-np-tx-fifo-size = <128>;
- g-tx-fifo-size = <128 128 16 16 16>;
- };
-
- dwc3: usb@ff500000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xff500000 0x0 0x100000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- maximum-speed = "high-speed";
- snps,dis_u2_susphy_quirk;
- };
- };
-
- ethmac: ethernet@ff3f0000 {
- compatible = "amlogic,meson-axg-dwmac",
- "snps,dwmac-3.70a",
- "snps,dwmac";
- reg = <0x0 0xff3f0000 0x0 0x10000>,
- <0x0 0xff634540 0x0 0x8>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "stmmaceth", "clkin0", "clkin1",
- "timing-adjustment";
- rx-fifo-depth = <4096>;
- tx-fifo-depth = <2048>;
- power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>;
- status = "disabled";
- };
-
- pcie_phy: phy@ff644000 {
- compatible = "amlogic,axg-pcie-phy";
- reg = <0x0 0xff644000 0x0 0x1c>;
- resets = <&reset RESET_PCIE_PHY>;
- phys = <&mipi_pcie_analog_dphy>;
- phy-names = "analog";
- #phy-cells = <0>;
- };
-
- pdm: audio-controller@ff632000 {
- compatible = "amlogic,axg-pdm";
- reg = <0x0 0xff632000 0x0 0x34>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "PDM";
- clocks = <&clkc_audio AUD_CLKID_PDM>,
- <&clkc_audio AUD_CLKID_PDM_DCLK>,
- <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
- clock-names = "pclk", "dclk", "sysclk";
- status = "disabled";
- };
-
- periphs: bus@ff634000 {
- compatible = "simple-bus";
- reg = <0x0 0xff634000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
-
- hwrng: rng@18 {
- compatible = "amlogic,meson-rng";
- reg = <0x0 0x18 0x0 0x4>;
- clocks = <&clkc CLKID_RNG0>;
- clock-names = "core";
- };
-
- pinctrl_periphs: pinctrl@480 {
- compatible = "amlogic,meson-axg-periphs-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio: bank@480 {
- reg = <0x0 0x00480 0x0 0x40>,
- <0x0 0x004e8 0x0 0x14>,
- <0x0 0x00520 0x0 0x14>,
- <0x0 0x00430 0x0 0x3c>;
- reg-names = "mux", "pull", "pull-enable", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_periphs 0 0 86>;
- };
-
- i2c0_pins: i2c0 {
- mux {
- groups = "i2c0_sck",
- "i2c0_sda";
- function = "i2c0";
- bias-disable;
- };
- };
-
- i2c1_x_pins: i2c1_x {
- mux {
- groups = "i2c1_sck_x",
- "i2c1_sda_x";
- function = "i2c1";
- bias-disable;
- };
- };
-
- i2c1_z_pins: i2c1_z {
- mux {
- groups = "i2c1_sck_z",
- "i2c1_sda_z";
- function = "i2c1";
- bias-disable;
- };
- };
-
- i2c2_a_pins: i2c2_a {
- mux {
- groups = "i2c2_sck_a",
- "i2c2_sda_a";
- function = "i2c2";
- bias-disable;
- };
- };
-
- i2c2_x_pins: i2c2_x {
- mux {
- groups = "i2c2_sck_x",
- "i2c2_sda_x";
- function = "i2c2";
- bias-disable;
- };
- };
-
- i2c3_a6_pins: i2c3_a6 {
- mux {
- groups = "i2c3_sda_a6",
- "i2c3_sck_a7";
- function = "i2c3";
- bias-disable;
- };
- };
-
- i2c3_a12_pins: i2c3_a12 {
- mux {
- groups = "i2c3_sda_a12",
- "i2c3_sck_a13";
- function = "i2c3";
- bias-disable;
- };
- };
-
- i2c3_a19_pins: i2c3_a19 {
- mux {
- groups = "i2c3_sda_a19",
- "i2c3_sck_a20";
- function = "i2c3";
- bias-disable;
- };
- };
-
- emmc_pins: emmc {
- mux-0 {
- groups = "emmc_nand_d0",
- "emmc_nand_d1",
- "emmc_nand_d2",
- "emmc_nand_d3",
- "emmc_nand_d4",
- "emmc_nand_d5",
- "emmc_nand_d6",
- "emmc_nand_d7",
- "emmc_cmd";
- function = "emmc";
- bias-pull-up;
- };
-
- mux-1 {
- groups = "emmc_clk";
- function = "emmc";
- bias-disable;
- };
- };
-
- emmc_ds_pins: emmc_ds {
- mux {
- groups = "emmc_ds";
- function = "emmc";
- bias-pull-down;
- };
- };
-
- emmc_clk_gate_pins: emmc_clk_gate {
- mux {
- groups = "BOOT_8";
- function = "gpio_periphs";
- bias-pull-down;
- };
- };
-
- eth_rgmii_x_pins: eth-x-rgmii {
- mux {
- groups = "eth_mdio_x",
- "eth_mdc_x",
- "eth_rgmii_rx_clk_x",
- "eth_rx_dv_x",
- "eth_rxd0_x",
- "eth_rxd1_x",
- "eth_rxd2_rgmii",
- "eth_rxd3_rgmii",
- "eth_rgmii_tx_clk",
- "eth_txen_x",
- "eth_txd0_x",
- "eth_txd1_x",
- "eth_txd2_rgmii",
- "eth_txd3_rgmii";
- function = "eth";
- bias-disable;
- };
- };
-
- eth_rgmii_y_pins: eth-y-rgmii {
- mux {
- groups = "eth_mdio_y",
- "eth_mdc_y",
- "eth_rgmii_rx_clk_y",
- "eth_rx_dv_y",
- "eth_rxd0_y",
- "eth_rxd1_y",
- "eth_rxd2_rgmii",
- "eth_rxd3_rgmii",
- "eth_rgmii_tx_clk",
- "eth_txen_y",
- "eth_txd0_y",
- "eth_txd1_y",
- "eth_txd2_rgmii",
- "eth_txd3_rgmii";
- function = "eth";
- bias-disable;
- };
- };
-
- eth_rmii_x_pins: eth-x-rmii {
- mux {
- groups = "eth_mdio_x",
- "eth_mdc_x",
- "eth_rgmii_rx_clk_x",
- "eth_rx_dv_x",
- "eth_rxd0_x",
- "eth_rxd1_x",
- "eth_txen_x",
- "eth_txd0_x",
- "eth_txd1_x";
- function = "eth";
- bias-disable;
- };
- };
-
- eth_rmii_y_pins: eth-y-rmii {
- mux {
- groups = "eth_mdio_y",
- "eth_mdc_y",
- "eth_rgmii_rx_clk_y",
- "eth_rx_dv_y",
- "eth_rxd0_y",
- "eth_rxd1_y",
- "eth_txen_y",
- "eth_txd0_y",
- "eth_txd1_y";
- function = "eth";
- bias-disable;
- };
- };
-
- mclk_b_pins: mclk_b {
- mux {
- groups = "mclk_b";
- function = "mclk_b";
- bias-disable;
- };
- };
-
- mclk_c_pins: mclk_c {
- mux {
- groups = "mclk_c";
- function = "mclk_c";
- bias-disable;
- };
- };
-
- pdm_dclk_a14_pins: pdm_dclk_a14 {
- mux {
- groups = "pdm_dclk_a14";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_dclk_a19_pins: pdm_dclk_a19 {
- mux {
- groups = "pdm_dclk_a19";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din0_pins: pdm_din0 {
- mux {
- groups = "pdm_din0";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din1_pins: pdm_din1 {
- mux {
- groups = "pdm_din1";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din2_pins: pdm_din2 {
- mux {
- groups = "pdm_din2";
- function = "pdm";
- bias-disable;
- };
- };
-
- pdm_din3_pins: pdm_din3 {
- mux {
- groups = "pdm_din3";
- function = "pdm";
- bias-disable;
- };
- };
-
- pwm_a_a_pins: pwm_a_a {
- mux {
- groups = "pwm_a_a";
- function = "pwm_a";
- bias-disable;
- };
- };
-
- pwm_a_x18_pins: pwm_a_x18 {
- mux {
- groups = "pwm_a_x18";
- function = "pwm_a";
- bias-disable;
- };
- };
-
- pwm_a_x20_pins: pwm_a_x20 {
- mux {
- groups = "pwm_a_x20";
- function = "pwm_a";
- bias-disable;
- };
- };
-
- pwm_a_z_pins: pwm_a_z {
- mux {
- groups = "pwm_a_z";
- function = "pwm_a";
- bias-disable;
- };
- };
-
- pwm_b_a_pins: pwm_b_a {
- mux {
- groups = "pwm_b_a";
- function = "pwm_b";
- bias-disable;
- };
- };
-
- pwm_b_x_pins: pwm_b_x {
- mux {
- groups = "pwm_b_x";
- function = "pwm_b";
- bias-disable;
- };
- };
-
- pwm_b_z_pins: pwm_b_z {
- mux {
- groups = "pwm_b_z";
- function = "pwm_b";
- bias-disable;
- };
- };
-
- pwm_c_a_pins: pwm_c_a {
- mux {
- groups = "pwm_c_a";
- function = "pwm_c";
- bias-disable;
- };
- };
-
- pwm_c_x10_pins: pwm_c_x10 {
- mux {
- groups = "pwm_c_x10";
- function = "pwm_c";
- bias-disable;
- };
- };
-
- pwm_c_x17_pins: pwm_c_x17 {
- mux {
- groups = "pwm_c_x17";
- function = "pwm_c";
- bias-disable;
- };
- };
-
- pwm_d_x11_pins: pwm_d_x11 {
- mux {
- groups = "pwm_d_x11";
- function = "pwm_d";
- bias-disable;
- };
- };
-
- pwm_d_x16_pins: pwm_d_x16 {
- mux {
- groups = "pwm_d_x16";
- function = "pwm_d";
- bias-disable;
- };
- };
-
- sdio_pins: sdio {
- mux-0 {
- groups = "sdio_d0",
- "sdio_d1",
- "sdio_d2",
- "sdio_d3",
- "sdio_cmd";
- function = "sdio";
- bias-pull-up;
- };
-
- mux-1 {
- groups = "sdio_clk";
- function = "sdio";
- bias-disable;
- };
- };
-
- sdio_clk_gate_pins: sdio_clk_gate {
- mux {
- groups = "GPIOX_4";
- function = "gpio_periphs";
- bias-pull-down;
- };
- };
-
- spdif_in_z_pins: spdif_in_z {
- mux {
- groups = "spdif_in_z";
- function = "spdif_in";
- bias-disable;
- };
- };
-
- spdif_in_a1_pins: spdif_in_a1 {
- mux {
- groups = "spdif_in_a1";
- function = "spdif_in";
- bias-disable;
- };
- };
-
- spdif_in_a7_pins: spdif_in_a7 {
- mux {
- groups = "spdif_in_a7";
- function = "spdif_in";
- bias-disable;
- };
- };
-
- spdif_in_a19_pins: spdif_in_a19 {
- mux {
- groups = "spdif_in_a19";
- function = "spdif_in";
- bias-disable;
- };
- };
-
- spdif_in_a20_pins: spdif_in_a20 {
- mux {
- groups = "spdif_in_a20";
- function = "spdif_in";
- bias-disable;
- };
- };
-
- spdif_out_a1_pins: spdif_out_a1 {
- mux {
- groups = "spdif_out_a1";
- function = "spdif_out";
- bias-disable;
- };
- };
-
- spdif_out_a11_pins: spdif_out_a11 {
- mux {
- groups = "spdif_out_a11";
- function = "spdif_out";
- bias-disable;
- };
- };
-
- spdif_out_a19_pins: spdif_out_a19 {
- mux {
- groups = "spdif_out_a19";
- function = "spdif_out";
- bias-disable;
- };
- };
-
- spdif_out_a20_pins: spdif_out_a20 {
- mux {
- groups = "spdif_out_a20";
- function = "spdif_out";
- bias-disable;
- };
- };
-
- spdif_out_z_pins: spdif_out_z {
- mux {
- groups = "spdif_out_z";
- function = "spdif_out";
- bias-disable;
- };
- };
-
- spi0_pins: spi0 {
- mux {
- groups = "spi0_miso",
- "spi0_mosi",
- "spi0_clk";
- function = "spi0";
- bias-disable;
- };
- };
-
- spi0_ss0_pins: spi0_ss0 {
- mux {
- groups = "spi0_ss0";
- function = "spi0";
- bias-disable;
- };
- };
-
- spi0_ss1_pins: spi0_ss1 {
- mux {
- groups = "spi0_ss1";
- function = "spi0";
- bias-disable;
- };
- };
-
- spi0_ss2_pins: spi0_ss2 {
- mux {
- groups = "spi0_ss2";
- function = "spi0";
- bias-disable;
- };
- };
-
- spi1_a_pins: spi1_a {
- mux {
- groups = "spi1_miso_a",
- "spi1_mosi_a",
- "spi1_clk_a";
- function = "spi1";
- bias-disable;
- };
- };
-
- spi1_ss0_a_pins: spi1_ss0_a {
- mux {
- groups = "spi1_ss0_a";
- function = "spi1";
- bias-disable;
- };
- };
-
- spi1_ss1_pins: spi1_ss1 {
- mux {
- groups = "spi1_ss1";
- function = "spi1";
- bias-disable;
- };
- };
-
- spi1_x_pins: spi1_x {
- mux {
- groups = "spi1_miso_x",
- "spi1_mosi_x",
- "spi1_clk_x";
- function = "spi1";
- bias-disable;
- };
- };
-
- spi1_ss0_x_pins: spi1_ss0_x {
- mux {
- groups = "spi1_ss0_x";
- function = "spi1";
- bias-disable;
- };
- };
-
- tdma_din0_pins: tdma_din0 {
- mux {
- groups = "tdma_din0";
- function = "tdma";
- bias-disable;
- };
- };
-
- tdma_dout0_x14_pins: tdma_dout0_x14 {
- mux {
- groups = "tdma_dout0_x14";
- function = "tdma";
- bias-disable;
- };
- };
-
- tdma_dout0_x15_pins: tdma_dout0_x15 {
- mux {
- groups = "tdma_dout0_x15";
- function = "tdma";
- bias-disable;
- };
- };
-
- tdma_dout1_pins: tdma_dout1 {
- mux {
- groups = "tdma_dout1";
- function = "tdma";
- bias-disable;
- };
- };
-
- tdma_din1_pins: tdma_din1 {
- mux {
- groups = "tdma_din1";
- function = "tdma";
- bias-disable;
- };
- };
-
- tdma_fs_pins: tdma_fs {
- mux {
- groups = "tdma_fs";
- function = "tdma";
- bias-disable;
- };
- };
-
- tdma_fs_slv_pins: tdma_fs_slv {
- mux {
- groups = "tdma_fs_slv";
- function = "tdma";
- bias-disable;
- };
- };
-
- tdma_sclk_pins: tdma_sclk {
- mux {
- groups = "tdma_sclk";
- function = "tdma";
- bias-disable;
- };
- };
-
- tdma_sclk_slv_pins: tdma_sclk_slv {
- mux {
- groups = "tdma_sclk_slv";
- function = "tdma";
- bias-disable;
- };
- };
-
- tdmb_din0_pins: tdmb_din0 {
- mux {
- groups = "tdmb_din0";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_din1_pins: tdmb_din1 {
- mux {
- groups = "tdmb_din1";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_din2_pins: tdmb_din2 {
- mux {
- groups = "tdmb_din2";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_din3_pins: tdmb_din3 {
- mux {
- groups = "tdmb_din3";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_dout0_pins: tdmb_dout0 {
- mux {
- groups = "tdmb_dout0";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_dout1_pins: tdmb_dout1 {
- mux {
- groups = "tdmb_dout1";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_dout2_pins: tdmb_dout2 {
- mux {
- groups = "tdmb_dout2";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_dout3_pins: tdmb_dout3 {
- mux {
- groups = "tdmb_dout3";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_fs_pins: tdmb_fs {
- mux {
- groups = "tdmb_fs";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_fs_slv_pins: tdmb_fs_slv {
- mux {
- groups = "tdmb_fs_slv";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_sclk_pins: tdmb_sclk {
- mux {
- groups = "tdmb_sclk";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmb_sclk_slv_pins: tdmb_sclk_slv {
- mux {
- groups = "tdmb_sclk_slv";
- function = "tdmb";
- bias-disable;
- };
- };
-
- tdmc_fs_pins: tdmc_fs {
- mux {
- groups = "tdmc_fs";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_fs_slv_pins: tdmc_fs_slv {
- mux {
- groups = "tdmc_fs_slv";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_sclk_pins: tdmc_sclk {
- mux {
- groups = "tdmc_sclk";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_sclk_slv_pins: tdmc_sclk_slv {
- mux {
- groups = "tdmc_sclk_slv";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_din0_pins: tdmc_din0 {
- mux {
- groups = "tdmc_din0";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_din1_pins: tdmc_din1 {
- mux {
- groups = "tdmc_din1";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_din2_pins: tdmc_din2 {
- mux {
- groups = "tdmc_din2";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_din3_pins: tdmc_din3 {
- mux {
- groups = "tdmc_din3";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_dout0_pins: tdmc_dout0 {
- mux {
- groups = "tdmc_dout0";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_dout1_pins: tdmc_dout1 {
- mux {
- groups = "tdmc_dout1";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_dout2_pins: tdmc_dout2 {
- mux {
- groups = "tdmc_dout2";
- function = "tdmc";
- bias-disable;
- };
- };
-
- tdmc_dout3_pins: tdmc_dout3 {
- mux {
- groups = "tdmc_dout3";
- function = "tdmc";
- bias-disable;
- };
- };
-
- uart_a_pins: uart_a {
- mux {
- groups = "uart_tx_a",
- "uart_rx_a";
- function = "uart_a";
- bias-disable;
- };
- };
-
- uart_a_cts_rts_pins: uart_a_cts_rts {
- mux {
- groups = "uart_cts_a",
- "uart_rts_a";
- function = "uart_a";
- bias-disable;
- };
- };
-
- uart_b_x_pins: uart_b_x {
- mux {
- groups = "uart_tx_b_x",
- "uart_rx_b_x";
- function = "uart_b";
- bias-disable;
- };
- };
-
- uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
- mux {
- groups = "uart_cts_b_x",
- "uart_rts_b_x";
- function = "uart_b";
- bias-disable;
- };
- };
-
- uart_b_z_pins: uart_b_z {
- mux {
- groups = "uart_tx_b_z",
- "uart_rx_b_z";
- function = "uart_b";
- bias-disable;
- };
- };
-
- uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
- mux {
- groups = "uart_cts_b_z",
- "uart_rts_b_z";
- function = "uart_b";
- bias-disable;
- };
- };
-
- uart_ao_b_z_pins: uart_ao_b_z {
- mux {
- groups = "uart_ao_tx_b_z",
- "uart_ao_rx_b_z";
- function = "uart_ao_b_z";
- bias-disable;
- };
- };
-
- uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
- mux {
- groups = "uart_ao_cts_b_z",
- "uart_ao_rts_b_z";
- function = "uart_ao_b_z";
- bias-disable;
- };
- };
- };
- };
-
- hiubus: bus@ff63c000 {
- compatible = "simple-bus";
- reg = <0x0 0xff63c000 0x0 0x1c00>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
-
- sysctrl: system-controller@0 {
- compatible = "amlogic,meson-axg-hhi-sysctrl",
- "simple-mfd", "syscon";
- reg = <0 0 0 0x400>;
-
- clkc: clock-controller {
- compatible = "amlogic,axg-clkc";
- #clock-cells = <1>;
- clocks = <&xtal>;
- clock-names = "xtal";
- };
-
- pwrc: power-controller {
- compatible = "amlogic,meson-axg-pwrc";
- #power-domain-cells = <1>;
- amlogic,ao-sysctrl = <&sysctrl_AO>;
- resets = <&reset RESET_VIU>,
- <&reset RESET_VENC>,
- <&reset RESET_VCBUS>,
- <&reset RESET_VENCL>,
- <&reset RESET_VID_LOCK>;
- reset-names = "viu", "venc", "vcbus",
- "vencl", "vid_lock";
- clocks = <&clkc CLKID_VPU>,
- <&clkc CLKID_VAPB>;
- clock-names = "vpu", "vapb";
- /*
- * VPU clocking is provided by two identical clock paths
- * VPU_0 and VPU_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- * Same for VAPB but with a final gate after the glitch free mux.
- */
- assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
- <&clkc CLKID_VPU_0>,
- <&clkc CLKID_VPU>, /* Glitch free mux */
- <&clkc CLKID_VAPB_0_SEL>,
- <&clkc CLKID_VAPB_0>,
- <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
- assigned-clock-parents = <&clkc CLKID_FCLK_DIV4>,
- <0>, /* Do Nothing */
- <&clkc CLKID_VPU_0>,
- <&clkc CLKID_FCLK_DIV4>,
- <0>, /* Do Nothing */
- <&clkc CLKID_VAPB_0>;
- assigned-clock-rates = <0>, /* Do Nothing */
- <250000000>,
- <0>, /* Do Nothing */
- <0>, /* Do Nothing */
- <250000000>,
- <0>; /* Do Nothing */
- };
-
- mipi_pcie_analog_dphy: phy {
- compatible = "amlogic,axg-mipi-pcie-analog-phy";
- #phy-cells = <0>;
- status = "disabled";
- };
- };
- };
-
- mailbox: mailbox@ff63c404 {
- compatible = "amlogic,meson-gxbb-mhu";
- reg = <0 0xff63c404 0 0x4c>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
- #mbox-cells = <1>;
- };
-
- mipi_dphy: phy@ff640000 {
- compatible = "amlogic,axg-mipi-dphy";
- reg = <0x0 0xff640000 0x0 0x100>;
- clocks = <&clkc CLKID_MIPI_DSI_PHY>;
- clock-names = "pclk";
- resets = <&reset RESET_MIPI_PHY>;
- reset-names = "phy";
- phys = <&mipi_pcie_analog_dphy>;
- phy-names = "analog";
- #phy-cells = <0>;
- status = "disabled";
- };
-
- audio: bus@ff642000 {
- compatible = "simple-bus";
- reg = <0x0 0xff642000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
-
- clkc_audio: clock-controller@0 {
- compatible = "amlogic,axg-audio-clkc";
- reg = <0x0 0x0 0x0 0xb4>;
- #clock-cells = <1>;
-
- clocks = <&clkc CLKID_AUDIO>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL3>,
- <&clkc CLKID_HIFI_PLL>,
- <&clkc CLKID_FCLK_DIV3>,
- <&clkc CLKID_FCLK_DIV4>,
- <&clkc CLKID_GP0_PLL>;
- clock-names = "pclk",
- "mst_in0",
- "mst_in1",
- "mst_in2",
- "mst_in3",
- "mst_in4",
- "mst_in5",
- "mst_in6",
- "mst_in7";
-
- resets = <&reset RESET_AUDIO>;
- };
-
- toddr_a: audio-controller@100 {
- compatible = "amlogic,axg-toddr";
- reg = <0x0 0x100 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "TODDR_A";
- interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
- resets = <&arb AXG_ARB_TODDR_A>;
- amlogic,fifo-depth = <512>;
- status = "disabled";
- };
-
- toddr_b: audio-controller@140 {
- compatible = "amlogic,axg-toddr";
- reg = <0x0 0x140 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "TODDR_B";
- interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
- resets = <&arb AXG_ARB_TODDR_B>;
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- toddr_c: audio-controller@180 {
- compatible = "amlogic,axg-toddr";
- reg = <0x0 0x180 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "TODDR_C";
- interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
- resets = <&arb AXG_ARB_TODDR_C>;
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- frddr_a: audio-controller@1c0 {
- compatible = "amlogic,axg-frddr";
- reg = <0x0 0x1c0 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "FRDDR_A";
- interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
- resets = <&arb AXG_ARB_FRDDR_A>;
- amlogic,fifo-depth = <512>;
- status = "disabled";
- };
-
- frddr_b: audio-controller@200 {
- compatible = "amlogic,axg-frddr";
- reg = <0x0 0x200 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "FRDDR_B";
- interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
- resets = <&arb AXG_ARB_FRDDR_B>;
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- frddr_c: audio-controller@240 {
- compatible = "amlogic,axg-frddr";
- reg = <0x0 0x240 0x0 0x2c>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "FRDDR_C";
- interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
- resets = <&arb AXG_ARB_FRDDR_C>;
- amlogic,fifo-depth = <256>;
- status = "disabled";
- };
-
- arb: reset-controller@280 {
- compatible = "amlogic,meson-axg-audio-arb";
- reg = <0x0 0x280 0x0 0x4>;
- #reset-cells = <1>;
- clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
- };
-
- tdmin_a: audio-controller@300 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x300 0x0 0x40>;
- sound-name-prefix = "TDMIN_A";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_b: audio-controller@340 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x340 0x0 0x40>;
- sound-name-prefix = "TDMIN_B";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_c: audio-controller@380 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x380 0x0 0x40>;
- sound-name-prefix = "TDMIN_C";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_lb: audio-controller@3c0 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x3c0 0x0 0x40>;
- sound-name-prefix = "TDMIN_LB";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- spdifin: audio-controller@400 {
- compatible = "amlogic,axg-spdifin";
- reg = <0x0 0x400 0x0 0x30>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFIN";
- interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
- <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
- clock-names = "pclk", "refclk";
- status = "disabled";
- };
-
- spdifout: audio-controller@480 {
- compatible = "amlogic,axg-spdifout";
- reg = <0x0 0x480 0x0 0x50>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFOUT";
- clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
- <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
- clock-names = "pclk", "mclk";
- status = "disabled";
- };
-
- tdmout_a: audio-controller@500 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x500 0x0 0x40>;
- sound-name-prefix = "TDMOUT_A";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_b: audio-controller@540 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x540 0x0 0x40>;
- sound-name-prefix = "TDMOUT_B";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_c: audio-controller@580 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x580 0x0 0x40>;
- sound-name-prefix = "TDMOUT_C";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
- };
-
- aobus: bus@ff800000 {
- compatible = "simple-bus";
- reg = <0x0 0xff800000 0x0 0x100000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
-
- sysctrl_AO: sys-ctrl@0 {
- compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
- reg = <0x0 0x0 0x0 0x100>;
-
- clkc_AO: clock-controller {
- compatible = "amlogic,meson-axg-aoclkc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- clocks = <&xtal>, <&clkc CLKID_CLK81>;
- clock-names = "xtal", "mpeg-clk";
- };
- };
-
- pinctrl_aobus: pinctrl@14 {
- compatible = "amlogic,meson-axg-aobus-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio_ao: bank@14 {
- reg = <0x0 0x00014 0x0 0x8>,
- <0x0 0x0002c 0x0 0x4>,
- <0x0 0x00024 0x0 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_aobus 0 0 15>;
- };
-
- i2c_ao_sck_4_pins: i2c_ao_sck_4 {
- mux {
- groups = "i2c_ao_sck_4";
- function = "i2c_ao";
- bias-disable;
- };
- };
-
- i2c_ao_sck_8_pins: i2c_ao_sck_8 {
- mux {
- groups = "i2c_ao_sck_8";
- function = "i2c_ao";
- bias-disable;
- };
- };
-
- i2c_ao_sck_10_pins: i2c_ao_sck_10 {
- mux {
- groups = "i2c_ao_sck_10";
- function = "i2c_ao";
- bias-disable;
- };
- };
-
- i2c_ao_sda_5_pins: i2c_ao_sda_5 {
- mux {
- groups = "i2c_ao_sda_5";
- function = "i2c_ao";
- bias-disable;
- };
- };
-
- i2c_ao_sda_9_pins: i2c_ao_sda_9 {
- mux {
- groups = "i2c_ao_sda_9";
- function = "i2c_ao";
- bias-disable;
- };
- };
-
- i2c_ao_sda_11_pins: i2c_ao_sda_11 {
- mux {
- groups = "i2c_ao_sda_11";
- function = "i2c_ao";
- bias-disable;
- };
- };
-
- remote_input_ao_pins: remote_input_ao {
- mux {
- groups = "remote_input_ao";
- function = "remote_input_ao";
- bias-disable;
- };
- };
-
- uart_ao_a_pins: uart_ao_a {
- mux {
- groups = "uart_ao_tx_a",
- "uart_ao_rx_a";
- function = "uart_ao_a";
- bias-disable;
- };
- };
-
- uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
- mux {
- groups = "uart_ao_cts_a",
- "uart_ao_rts_a";
- function = "uart_ao_a";
- bias-disable;
- };
- };
-
- uart_ao_b_pins: uart_ao_b {
- mux {
- groups = "uart_ao_tx_b",
- "uart_ao_rx_b";
- function = "uart_ao_b";
- bias-disable;
- };
- };
-
- uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
- mux {
- groups = "uart_ao_cts_b",
- "uart_ao_rts_b";
- function = "uart_ao_b";
- bias-disable;
- };
- };
- };
-
- sec_AO: ao-secure@140 {
- compatible = "amlogic,meson-gx-ao-secure", "syscon";
- reg = <0x0 0x140 0x0 0x140>;
- amlogic,has-chip-id;
- };
-
- pwm_AO_cd: pwm@2000 {
- compatible = "amlogic,meson-axg-ao-pwm";
- reg = <0x0 0x02000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- uart_AO: serial@3000 {
- compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
- reg = <0x0 0x3000 0x0 0x18>;
- interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
-
- uart_AO_B: serial@4000 {
- compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
- reg = <0x0 0x4000 0x0 0x18>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
-
- i2c_AO: i2c@5000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x05000 0x0 0x20>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_AO_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- pwm_AO_ab: pwm@7000 {
- compatible = "amlogic,meson-axg-ao-pwm";
- reg = <0x0 0x07000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- ir: ir@8000 {
- compatible = "amlogic,meson-gxbb-ir";
- reg = <0x0 0x8000 0x0 0x20>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
- saradc: adc@9000 {
- compatible = "amlogic,meson-axg-saradc",
- "amlogic,meson-saradc";
- reg = <0x0 0x9000 0x0 0x38>;
- #io-channel-cells = <1>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>,
- <&clkc_AO CLKID_AO_SAR_ADC>,
- <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
- <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
- clock-names = "clkin", "core", "adc_clk", "adc_sel";
- status = "disabled";
- };
- };
-
- ge2d: ge2d@ff940000 {
- compatible = "amlogic,axg-ge2d";
- reg = <0x0 0xff940000 0x0 0x10000>;
- interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_VAPB>;
- resets = <&reset RESET_GE2D>;
- };
-
- gic: interrupt-controller@ffc01000 {
- compatible = "arm,gic-400";
- reg = <0x0 0xffc01000 0 0x1000>,
- <0x0 0xffc02000 0 0x2000>,
- <0x0 0xffc04000 0 0x2000>,
- <0x0 0xffc06000 0 0x2000>;
- interrupt-controller;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
- #interrupt-cells = <3>;
- #address-cells = <0>;
- };
-
- cbus: bus@ffd00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffd00000 0x0 0x25000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
-
- reset: reset-controller@1004 {
- compatible = "amlogic,meson-axg-reset";
- reg = <0x0 0x01004 0x0 0x9c>;
- #reset-cells = <1>;
- };
-
- gpio_intc: interrupt-controller@f080 {
- compatible = "amlogic,meson-axg-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0xf080 0x0 0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
- };
-
- watchdog@f0d0 {
- compatible = "amlogic,meson-gxbb-wdt";
- reg = <0x0 0xf0d0 0x0 0x10>;
- clocks = <&xtal>;
- };
-
- pwm_ab: pwm@1b000 {
- compatible = "amlogic,meson-axg-ee-pwm";
- reg = <0x0 0x1b000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm_cd: pwm@1a000 {
- compatible = "amlogic,meson-axg-ee-pwm";
- reg = <0x0 0x1a000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- spicc0: spi@13000 {
- compatible = "amlogic,meson-axg-spicc";
- reg = <0x0 0x13000 0x0 0x3c>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_SPICC0>;
- clock-names = "core";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spicc1: spi@15000 {
- compatible = "amlogic,meson-axg-spicc";
- reg = <0x0 0x15000 0x0 0x3c>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_SPICC1>;
- clock-names = "core";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- clk_msr: clock-measure@18000 {
- compatible = "amlogic,meson-axg-clk-measure";
- reg = <0x0 0x18000 0x0 0x10>;
- };
-
- i2c3: i2c@1c000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1c000 0x0 0x20>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@1d000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1d000 0x0 0x20>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c1: i2c@1e000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1e000 0x0 0x20>;
- interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c0: i2c@1f000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1f000 0x0 0x20>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart_B: serial@23000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x23000 0x0 0x18>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- };
-
- uart_A: serial@24000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x24000 0x0 0x18>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- fifo-size = <128>;
- };
- };
-
- apb: bus@ffe00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffe00000 0x0 0x200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
-
- sd_emmc_b: sd@5000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x5000 0x0 0x800>;
- interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_B>,
- <&clkc CLKID_SD_EMMC_B_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_B>;
- };
-
- sd_emmc_c: mmc@7000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x7000 0x0 0x800>;
- interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_C>,
- <&clkc CLKID_SD_EMMC_C_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_C>;
- };
-
- usb2_phy1: phy@9020 {
- compatible = "amlogic,meson-gxl-usb2-phy";
- #phy-cells = <0>;
- reg = <0x0 0x9020 0x0 0x20>;
- clocks = <&clkc CLKID_USB>;
- clock-names = "phy";
- resets = <&reset RESET_USB_OTG>;
- reset-names = "phy";
- };
- };
-
- sram: sram@fffc0000 {
- compatible = "mmio-sram";
- reg = <0x0 0xfffc0000 0x0 0x20000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x0 0xfffc0000 0x20000>;
-
- cpu_scp_lpri: scp-sram@13000 {
- compatible = "amlogic,meson-axg-scp-shmem";
- reg = <0x13000 0x400>;
- };
-
- cpu_scp_hpri: scp-sram@13400 {
- compatible = "amlogic,meson-axg-scp-shmem";
- reg = <0x13400 0x400>;
- };
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- xtal: xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xtal";
- #clock-cells = <0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 BayLibre SAS.
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
-
- button-update {
- label = "update";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <1300000>;
- };
- };
-
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- spi0 = &spifc;
- };
-
- dio2133: analog-amplifier {
- compatible = "simple-audio-amplifier";
- sound-name-prefix = "AU2";
- VCC-supply = <&vcc5v>;
- enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cvbs-connector {
- compatible = "composite-video-connector";
- status = "disabled";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- power-button {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
- };
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- ao_5v: regulator-ao_5v {
- compatible = "regulator-fixed";
- regulator-name = "AO_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
- };
-
- dc_in: regulator-dc_in {
- compatible = "regulator-fixed";
- regulator-name = "DC_IN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-green {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_DISK_ACTIVITY;
- gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "disk-activity";
- };
-
- led-blue {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- panic-indicator;
- };
- };
-
- vcc_card: regulator-vcc_card {
- compatible = "regulator-fixed";
- regulator-name = "VCC_CARD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddio_ao3v3>;
-
- gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vcc5v: regulator-vcc5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&ao_5v>;
-
- gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&ao_5v>;
- regulator-always-on;
- };
-
- vddio_ao3v3: regulator-vddio_ao3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&ao_5v>;
- regulator-always-on;
- };
-
- vddio_boot: regulator-vddio_boot {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddio_ao3v3>;
- regulator-always-on;
- };
-
- vddio_card: regulator-vddio-card {
- compatible = "regulator-gpio";
- regulator-name = "VDDIO_CARD";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>;
- gpios-states = <0>;
-
- states = <3300000 0>,
- <1800000 1>;
-
- regulator-settling-time-up-us = <200>;
- regulator-settling-time-down-us = <50000>;
- };
-
- sound {
- compatible = "amlogic,gx-sound-card";
- model = "LIBRETECH-PC";
- audio-aux-devs = <&dio2133>;
- audio-widgets = "Speaker", "7J4-14 LEFT",
- "Speaker", "7J4-11 RIGHT";
- audio-routing = "AU2 INL", "ACODEC LOLN",
- "AU2 INR", "ACODEC LORN",
- "7J4-14 LEFT", "AU2 OUTL",
- "7J4-11 RIGHT", "AU2 OUTR";
- assigned-clocks = <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
- };
-
- dai-link-1 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
- dai-format = "i2s";
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
- };
-
- codec-1 {
- sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
- };
- };
-
- dai-link-2 {
- sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&hdmi_tx>;
- };
- };
-
- dai-link-3 {
- sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&acodec>;
- };
- };
- };
-};
-
-&acodec {
- AVDD-supply = <&vddio_ao18>;
- status = "okay";
-};
-
-&aiu {
- status = "okay";
-};
-
-&cec_AO {
- pinctrl-0 = <&ao_cec_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
- status = "okay";
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-ðmac {
- pinctrl-0 = <ð_pins>, <ð_phy_irq_pins>;
- pinctrl-names = "default";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
- phy-mode = "rgmii";
- status = "okay";
-};
-
-&external_mdio {
- external_phy: ethernet-phy@0 {
- reg = <0>;
- max-speed = <1000>;
- reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
- reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
- interrupt-parent = <&gpio_intc>;
- interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&pinctrl_periphs {
- /*
- * Make sure the reset pin of the usb HUB is driven high to take
- * it out of reset.
- */
- usb1_rst_pins: usb1_rst_irq {
- mux {
- groups = "GPIODV_3";
- function = "gpio_periphs";
- bias-disable;
- output-high;
- };
- };
-
- /* Make sure the phy irq pin is properly configured as input */
- eth_phy_irq_pins: eth_phy_irq {
- mux {
- groups = "GPIOZ_15";
- function = "gpio_periphs";
- bias-disable;
- output-disable;
- };
- };
-};
-
-&hdmi_tx {
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc5v>;
- status = "okay";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&ir {
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&i2c_C {
- pinctrl-0 = <&i2c_c_dv18_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- rtc: rtc@51 {
- reg = <0x51>;
- compatible = "nxp,pcf8563";
- #clock-cells = <0>;
- clock-output-names = "rtc_clkout";
- };
-};
-
-&pwm_AO_ab {
- pinctrl-0 = <&pwm_ao_a_3_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&pwm_ab {
- pinctrl-0 = <&pwm_b_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&pwm_ef {
- pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vddio_ao18>;
- status = "okay";
-};
-
-/* SD card */
-&sd_emmc_b {
- pinctrl-0 = <&sdcard_pins>;
- pinctrl-1 = <&sdcard_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-ddr50;
- max-frequency = <200000000>;
- disable-wp;
-
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
- vmmc-supply = <&vcc_card>;
- vqmmc-supply = <&vddio_card>;
-
- status = "okay";
-};
-
-/* eMMC */
-&sd_emmc_c {
- pinctrl-0 = <&emmc_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vddio_ao3v3>;
- vqmmc-supply = <&vddio_boot>;
-
- status = "okay";
-};
-
-&spifc {
- pinctrl-0 = <&nor_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- gd25lq128: flash@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <12000000>;
- };
-};
-
-&uart_AO {
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb {
- status = "okay";
- dr_mode = "host";
-};
-
-&usb2_phy0 {
- pinctrl-0 = <&usb1_rst_pins>;
- pinctrl-names = "default";
- phy-supply = <&vcc5v>;
-};
-
-&usb2_phy1 {
- phy-supply = <&vcc5v>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 BayLibre SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/ {
- gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-125000000 {
- opp-hz = /bits/ 64 <125000000>;
- opp-microvolt = <950000>;
- };
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <950000>;
- };
- opp-285714285 {
- opp-hz = /bits/ 64 <285714285>;
- opp-microvolt = <950000>;
- };
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <950000>;
- };
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <950000>;
- };
- opp-666666666 {
- opp-hz = /bits/ 64 <666666666>;
- opp-microvolt = <950000>;
- };
- opp-744000000 {
- opp-hz = /bits/ 64 <744000000>;
- opp-microvolt = <950000>;
- };
- };
-};
-
-&apb {
- mali: gpu@c0000 {
- compatible = "arm,mali-450";
- reg = <0x0 0xc0000 0x0 0x40000>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gp", "gpmmu", "pp", "pmu",
- "pp0", "ppmmu0", "pp1", "ppmmu1",
- "pp2", "ppmmu2";
- operating-points-v2 = <&gpu_opp_table>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either
- * the pin-compatible S912 (GXM) or S905D (GXL) SoCs.
- */
-
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- dio2133: analog-amplifier {
- compatible = "simple-audio-amplifier";
- sound-name-prefix = "AU2";
- VCC-supply = <&hdmi_5v>;
- enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
- };
-
- spdif_dit: audio-codec-0 {
- #sound-dai-cells = <0>;
- compatible = "linux,spdif-dit";
- status = "okay";
- sound-name-prefix = "DIT";
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- hdmi_5v: regulator-hdmi-5v {
- compatible = "regulator-fixed";
-
- regulator-name = "HDMI_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vddio_boot: regulator-vddio_boot {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- cvbs-connector {
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- sound {
- compatible = "amlogic,gx-sound-card";
- model = "P230-Q200";
- audio-aux-devs = <&dio2133>;
- audio-widgets = "Line", "Lineout";
- audio-routing = "AU2 INL", "ACODEC LOLP",
- "AU2 INR", "ACODEC LORP",
- "AU2 INL", "ACODEC LOLN",
- "AU2 INR", "ACODEC LORN",
- "Lineout", "AU2 OUTL",
- "Lineout", "AU2 OUTR";
- assigned-clocks = <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
- };
-
- dai-link-1 {
- sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
- };
-
- dai-link-2 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
- dai-format = "i2s";
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
- };
-
- codec-1 {
- sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
- };
- };
-
- dai-link-3 {
- sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
-
- codec-0 {
- sound-dai = <&spdif_dit>;
- };
- };
-
- dai-link-4 {
- sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&hdmi_tx>;
- };
- };
-
- dai-link-5 {
- sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&acodec>;
- };
- };
- };
-};
-
-&acodec {
- AVDD-supply = <&vddio_ao18>;
- status = "okay";
-};
-
-&aiu {
- status = "okay";
- pinctrl-0 = <&spdif_out_h_pins>;
- pinctrl-names = "default";
-
-};
-
-&cec_AO {
- status = "okay";
- pinctrl-0 = <&ao_cec_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-ðmac {
- status = "okay";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&hdmi_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_ao18>;
-};
-
-/* Wireless SDIO Module */
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power to be kept while in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_pins>;
- pinctrl-1 = <&sdcard_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "otg";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Andreas Färber
- *
- * Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/meson-gxbb-power.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- mmc0 = &sd_emmc_b; /* SD card */
- mmc1 = &sd_emmc_c; /* eMMC */
- mmc2 = &sd_emmc_a; /* SDIO */
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* 16 MiB reserved for Hardware ROM Firmware */
- hwrom_reserved: hwrom@0 {
- reg = <0x0 0x0 0x0 0x1000000>;
- no-map;
- };
-
- /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
- secmon_reserved: secmon@10000000 {
- reg = <0x0 0x10000000 0x0 0x200000>;
- no-map;
- };
-
- /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
- secmon_reserved_alt: secmon@5000000 {
- reg = <0x0 0x05000000 0x0 0x300000>;
- no-map;
- };
-
- /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
- secmon_reserved_bl32: secmon@5300000 {
- reg = <0x0 0x05300000 0x0 0x2000000>;
- no-map;
- };
-
- linux,cma {
- compatible = "shared-dma-pool";
- reusable;
- size = <0x0 0x10000000>;
- alignment = <0x0 0x400000>;
- linux,cma-default;
- };
- };
-
- chosen {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- simplefb_cvbs: framebuffer-cvbs {
- compatible = "amlogic,simple-framebuffer",
- "simple-framebuffer";
- amlogic,pipeline = "vpu-cvbs";
- power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
- status = "disabled";
- };
-
- simplefb_hdmi: framebuffer-hdmi {
- compatible = "amlogic,simple-framebuffer",
- "simple-framebuffer";
- amlogic,pipeline = "vpu-hdmi";
- power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
- status = "disabled";
- };
- };
-
- cpus {
- #address-cells = <0x2>;
- #size-cells = <0x0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 0>;
- #cooling-cells = <2>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 0>;
- #cooling-cells = <2>;
- };
-
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x2>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 0>;
- #cooling-cells = <2>;
- };
-
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x3>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 0>;
- #cooling-cells = <2>;
- };
-
- l2: l2-cache0 {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-
- thermal-zones {
- cpu-thermal {
- polling-delay-passive = <250>; /* milliseconds */
- polling-delay = <1000>; /* milliseconds */
-
- thermal-sensors = <&scpi_sensors 0>;
-
- trips {
- cpu_passive: cpu-passive {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- cpu_hot: cpu-hot {
- temperature = <90000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "hot";
- };
-
- cpu_critical: cpu-critical {
- temperature = <110000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cpu_cooling_maps: cooling-maps {
- map0 {
- trip = <&cpu_passive>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- map1 {
- trip = <&cpu_hot>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- arm-pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- xtal: xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xtal";
- #clock-cells = <0>;
- };
-
- firmware {
- sm: secure-monitor {
- compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
- };
- };
-
- efuse: efuse {
- compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
- #address-cells = <1>;
- #size-cells = <1>;
- read-only;
- secure-monitor = <&sm>;
-
- sn: sn@14 {
- reg = <0x14 0x10>;
- };
-
- eth_mac: eth-mac@34 {
- reg = <0x34 0x10>;
- };
-
- bid: bid@46 {
- reg = <0x46 0x30>;
- };
- };
-
- scpi {
- compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
- mboxes = <&mailbox 1 &mailbox 2>;
- shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-
- scpi_clocks: clocks {
- compatible = "arm,scpi-clocks";
-
- scpi_dvfs: clocks-0 {
- compatible = "arm,scpi-dvfs-clocks";
- #clock-cells = <1>;
- clock-indices = <0>;
- clock-output-names = "vcpu";
- };
- };
-
- scpi_sensors: sensors {
- compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
- #thermal-sensor-cells = <1>;
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- cbus: bus@c1100000 {
- compatible = "simple-bus";
- reg = <0x0 0xc1100000 0x0 0x100000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
-
- gpio_intc: interrupt-controller@9880 {
- compatible = "amlogic,meson-gpio-intc";
- reg = <0x0 0x9880 0x0 0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
- status = "disabled";
- };
-
- reset: reset-controller@4404 {
- compatible = "amlogic,meson-gxbb-reset";
- reg = <0x0 0x04404 0x0 0x9c>;
- #reset-cells = <1>;
- };
-
- aiu: audio-controller@5400 {
- compatible = "amlogic,aiu";
- #sound-dai-cells = <2>;
- sound-name-prefix = "AIU";
- reg = <0x0 0x5400 0x0 0x2ac>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "i2s", "spdif";
- status = "disabled";
- };
-
- uart_A: serial@84c0 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x84c0 0x0 0x18>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- fifo-size = <128>;
- };
-
- uart_B: serial@84dc {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x84dc 0x0 0x18>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
- i2c_A: i2c@8500 {
- compatible = "amlogic,meson-gxbb-i2c";
- reg = <0x0 0x08500 0x0 0x20>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- pwm_ab: pwm@8550 {
- compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
- reg = <0x0 0x08550 0x0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm_cd: pwm@8650 {
- compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
- reg = <0x0 0x08650 0x0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- saradc: adc@8680 {
- compatible = "amlogic,meson-saradc";
- reg = <0x0 0x8680 0x0 0x34>;
- #io-channel-cells = <1>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
- pwm_ef: pwm@86c0 {
- compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
- reg = <0x0 0x086c0 0x0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- uart_C: serial@8700 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x8700 0x0 0x18>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
- clock-measure@8758 {
- compatible = "amlogic,meson-gx-clk-measure";
- reg = <0x0 0x8758 0x0 0x10>;
- };
-
- i2c_B: i2c@87c0 {
- compatible = "amlogic,meson-gxbb-i2c";
- reg = <0x0 0x087c0 0x0 0x20>;
- interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c_C: i2c@87e0 {
- compatible = "amlogic,meson-gxbb-i2c";
- reg = <0x0 0x087e0 0x0 0x20>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spicc: spi@8d80 {
- compatible = "amlogic,meson-gx-spicc";
- reg = <0x0 0x08d80 0x0 0x80>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spifc: spi@8c80 {
- compatible = "amlogic,meson-gxbb-spifc";
- reg = <0x0 0x08c80 0x0 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- watchdog@98d0 {
- compatible = "amlogic,meson-gxbb-wdt";
- reg = <0x0 0x098d0 0x0 0x10>;
- clocks = <&xtal>;
- };
- };
-
- gic: interrupt-controller@c4301000 {
- compatible = "arm,gic-400";
- reg = <0x0 0xc4301000 0 0x1000>,
- <0x0 0xc4302000 0 0x2000>,
- <0x0 0xc4304000 0 0x2000>,
- <0x0 0xc4306000 0 0x2000>;
- interrupt-controller;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
- #interrupt-cells = <3>;
- #address-cells = <0>;
- };
-
- sram: sram@c8000000 {
- compatible = "mmio-sram";
- reg = <0x0 0xc8000000 0x0 0x14000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x0 0xc8000000 0x14000>;
-
- cpu_scp_lpri: scp-sram@0 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
- reg = <0x13000 0x400>;
- };
-
- cpu_scp_hpri: scp-sram@200 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
- reg = <0x13400 0x400>;
- };
- };
-
- aobus: bus@c8100000 {
- compatible = "simple-bus";
- reg = <0x0 0xc8100000 0x0 0x100000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
-
- sysctrl_AO: sys-ctrl@0 {
- compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
- reg = <0x0 0x0 0x0 0x100>;
-
- clkc_AO: clock-controller {
- compatible = "amlogic,meson-gx-aoclkc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
- };
-
- cec_AO: cec@100 {
- compatible = "amlogic,meson-gx-ao-cec";
- reg = <0x0 0x00100 0x0 0x14>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
- sec_AO: ao-secure@140 {
- compatible = "amlogic,meson-gx-ao-secure", "syscon";
- reg = <0x0 0x140 0x0 0x140>;
- amlogic,has-chip-id;
- };
-
- uart_AO: serial@4c0 {
- compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
- reg = <0x0 0x004c0 0x0 0x18>;
- interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
- uart_AO_B: serial@4e0 {
- compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
- reg = <0x0 0x004e0 0x0 0x18>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
- i2c_AO: i2c@500 {
- compatible = "amlogic,meson-gxbb-i2c";
- reg = <0x0 0x500 0x0 0x20>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- pwm_AO_ab: pwm@550 {
- compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
- reg = <0x0 0x00550 0x0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- ir: ir@580 {
- compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
- reg = <0x0 0x00580 0x0 0x40>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
- };
-
- vdec: video-codec@c8820000 {
- compatible = "amlogic,gx-vdec";
- reg = <0x0 0xc8820000 0x0 0x10000>,
- <0x0 0xc110a580 0x0 0xe4>;
- reg-names = "dos", "esparser";
-
- interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "vdec", "esparser";
-
- amlogic,ao-sysctrl = <&sysctrl_AO>;
- amlogic,canvas = <&canvas>;
- };
-
- periphs: bus@c8834000 {
- compatible = "simple-bus";
- reg = <0x0 0xc8834000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
-
- hwrng: rng@0 {
- compatible = "amlogic,meson-rng";
- reg = <0x0 0x0 0x0 0x4>;
- };
- };
-
- dmcbus: bus@c8838000 {
- compatible = "simple-bus";
- reg = <0x0 0xc8838000 0x0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
-
- canvas: video-lut@48 {
- compatible = "amlogic,canvas";
- reg = <0x0 0x48 0x0 0x14>;
- };
- };
-
- hiubus: bus@c883c000 {
- compatible = "simple-bus";
- reg = <0x0 0xc883c000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
-
- sysctrl: system-controller@0 {
- compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
- reg = <0 0 0 0x400>;
-
- pwrc: power-controller {
- compatible = "amlogic,meson-gxbb-pwrc";
- #power-domain-cells = <1>;
- amlogic,ao-sysctrl = <&sysctrl_AO>;
- };
- };
-
- mailbox: mailbox@404 {
- compatible = "amlogic,meson-gxbb-mhu";
- reg = <0 0x404 0 0x4c>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
- #mbox-cells = <1>;
- };
- };
-
- ethmac: ethernet@c9410000 {
- compatible = "amlogic,meson-gxbb-dwmac",
- "snps,dwmac-3.70a",
- "snps,dwmac";
- reg = <0x0 0xc9410000 0x0 0x10000>,
- <0x0 0xc8834540 0x0 0x4>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- rx-fifo-depth = <4096>;
- tx-fifo-depth = <2048>;
- power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
- status = "disabled";
- };
-
- apb: apb@d0000000 {
- compatible = "simple-bus";
- reg = <0x0 0xd0000000 0x0 0x200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
-
- sd_emmc_a: mmc@70000 {
- compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
- reg = <0x0 0x70000 0x0 0x800>;
- interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- sd_emmc_b: mmc@72000 {
- compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
- reg = <0x0 0x72000 0x0 0x800>;
- interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- sd_emmc_c: mmc@74000 {
- compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
- reg = <0x0 0x74000 0x0 0x800>;
- interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
- };
-
- vpu: vpu@d0100000 {
- compatible = "amlogic,meson-gx-vpu";
- reg = <0x0 0xd0100000 0x0 0x100000>,
- <0x0 0xc883c000 0x0 0x1000>;
- reg-names = "vpu", "hhi";
- interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- amlogic,canvas = <&canvas>;
-
- /* CVBS VDAC output port */
- cvbs_vdac_port: port@0 {
- reg = <0>;
- };
-
- /* HDMI-TX output port */
- hdmi_tx_port: port@1 {
- reg = <1>;
-
- hdmi_tx_out: endpoint {
- remote-endpoint = <&hdmi_tx_in>;
- };
- };
- };
-
- hdmi_tx: hdmi-tx@c883a000 {
- compatible = "amlogic,meson-gx-dw-hdmi";
- reg = <0x0 0xc883a000 0x0 0x1c>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "HDMITX";
- status = "disabled";
-
- /* VPU VENC Input */
- hdmi_tx_venc_port: port@0 {
- reg = <0>;
-
- hdmi_tx_in: endpoint {
- remote-endpoint = <&hdmi_tx_out>;
- };
- };
-
- /* TMDS Output */
- hdmi_tx_tmds_port: port@1 {
- reg = <1>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 BayLibre SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include "meson-gx-mali450.dtsi"
-
-&mali {
- compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
-
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
- clock-names = "bus", "core";
-
- assigned-clocks = <&clkc CLKID_GP0_PLL>;
- assigned-clock-rates = <744000000>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-#include "meson-gxl-s805x.dtsi"
-
-/ {
- compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
- "amlogic,meson-gxl";
- model = "Libre Computer AML-S805X-AC";
-
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- spi0 = &spifc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cvbs-connector {
- /*
- * The pads are present but no connector is soldered on
- * 2J2, so keep this off by default.
- */
- status = "disabled";
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- dc_5v: regulator-dc_5v {
- compatible = "regulator-fixed";
- regulator-name = "DC_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x20000000>;
- };
-
- vcck: regulator-vcck {
- compatible = "regulator-fixed";
- regulator-name = "VCCK";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_5v>;
-
- /*
- * This is controlled by GPIOAO_9 we reserve this but
- * claiming it as done below reset the board anyway
- * Need to investigate this
- *
- * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
- * enable-active-high;
- */
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_5v>;
- regulator-always-on;
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vddio_boot: regulator-vddio_boot {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- sound {
- compatible = "amlogic,gx-sound-card";
- model = "LIBRETECH-AC";
- audio-widgets = "Speaker", "9J5-3 LEFT",
- "Speaker", "9J5-2 RIGHT";
- audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
- "9J5-2 RIGHT", "ACODEC LORN";
- assigned-clocks = <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
- };
-
- dai-link-1 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
- dai-format = "i2s";
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
- };
-
- codec-1 {
- sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
- };
- };
-
- dai-link-2 {
- sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&hdmi_tx>;
- };
- };
-
- dai-link-3 {
- sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&acodec>;
- };
- };
- };
-};
-
-&acodec {
- AVDD-supply = <&vddio_ao18>;
- status = "okay";
-};
-
-&aiu {
- status = "okay";
-};
-
-&cec_AO {
- status = "okay";
- pinctrl-0 = <&ao_cec_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-ðmac {
- status = "okay";
-};
-
-&internal_phy {
- pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
- pinctrl-names = "default";
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&gpio_ao {
- gpio-line-names = "UART TX",
- "UART RX",
- "7J1 Header Pin31",
- "", "", "", "",
- "IR In",
- "HDMI CEC",
- "5V VCCK Regulator",
- /* GPIO_TEST_N */
- "";
-};
-
-&gpio {
- gpio-line-names = /* Bank GPIOZ */
- "", "", "", "", "", "", "",
- "", "", "", "", "", "", "",
- "Eth Link LED", "Eth Activity LED",
- /* Bank GPIOH */
- "HDMI HPD", "HDMI SDA", "HDMI SCL",
- "", "7J1 Header Pin13",
- "7J1 Header Pin15",
- "7J1 Header Pin7",
- "7J1 Header Pin12",
- "7J1 Header Pin16",
- "7J1 Header Pin18",
- /* Bank BOOT */
- "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
- "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
- "eMMC Clk", "eMMC Reset", "eMMC CMD",
- "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk",
- "", "SPI NOR Chip Select",
- /* Bank CARD */
- "", "", "", "", "", "", "",
- /* Bank GPIODV */
- "", "", "", "", "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "", "", "", "", "",
- "7J1 Header Pin27", "7J1 Header Pin28", "",
- "7J1 Header Pin29",
- "VCCK Regulator", "VDDEE Regulator",
- /* Bank GPIOX */
- "7J1 Header Pin22", "7J1 Header Pin26",
- "7J1 Header Pin36", "7J1 Header Pin38",
- "7J1 Header Pin40", "7J1 Header Pin37",
- "7J1 Header Pin33", "7J1 Header Pin35",
- "7J1 Header Pin19", "7J1 Header Pin21",
- "7J1 Header Pin24", "7J1 Header Pin23",
- "7J1 Header Pin8", "7J1 Header Pin10",
- "", "", "7J1 Header Pin32", "", "",
- /* Bank GPIOCLK */
- "", "";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_boot>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-&spifc {
- status = "okay";
- pinctrl-0 = <&nor_pins>;
- pinctrl-names = "default";
-
- w25q32: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <3000000>;
- };
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "host";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 BayLibre SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include "meson-gxl-s905x.dtsi"
-
-/ {
- compatible = "amlogic,s805x", "amlogic,meson-gxl";
-};
-
-/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
-&gpu_opp_table {
- opp-744000000 {
- status = "disabled";
- };
-};
-
-&mali {
- /delete-property/ assigned-clocks;
- /delete-property/ assigned-clock-rates;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 BayLibre SAS. All rights reserved.
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxl-s905d.dtsi"
-#include "meson-gx-libretech-pc.dtsi"
-
-/ {
- compatible = "libretech,aml-s905d-pc", "amlogic,s905d",
- "amlogic,meson-gxl";
- model = "Libre Computer AML-S905D-PC";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include "meson-gxl.dtsi"
-#include "meson-gxl-mali.dtsi"
-
-/ {
- compatible = "amlogic,s905d", "amlogic,meson-gxl";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
- * Copyright (c) 2020 JetHome
- * Author: Aleksandr Kazantsev <ak@tvip.ru>
- * Author: Alexey Shevelkin <ash@tvip.ru>
- * Author: Vyacheslav Bocharov <adeep@lexina.in>
- */
-
-/dts-v1/;
-
-#include "meson-gxl.dtsi"
-
-/ {
- compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl";
- model = "JetHome JetHub J80";
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- reserved-memory {
- linux,cma {
- size = <0x0 0x1000000>;
- };
- };
-
- aliases {
- serial0 = &uart_AO; /* Console */
- serial1 = &uart_A; /* Bluetooth */
- serial2 = &uart_AO_B; /* Wireless module 1 */
- serial3 = &uart_C; /* Wireless module 2 */
- ethernet0 = ðmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vddio_boot: regulator-vddio_boot {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-};
-
-&efuse {
- bt_mac: bt-mac@6 {
- reg = <0x6 0x6>;
- };
-
- wifi_mac: wifi-mac@c {
- reg = <0xc 0x6>;
- };
-};
-
-&sn {
- reg = <0x32 0x20>;
-};
-
-ð_mac {
- reg = <0x0 0x6>;
-};
-
-&bid {
- reg = <0x12 0x20>;
-};
-
-&usb {
- status = "okay";
- dr_mode = "host";
-};
-
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_ao18>;
-};
-
-/* Wireless SDIO Module */
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power to be kept while in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_pins>;
- pinctrl-1 = <&sdcard_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/* Console UART */
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-/* S905W only has access to its internal PHY */
-ðmac {
- status = "okay";
- phy-mode = "rmii";
- phy-handle = <&internal_phy>;
-};
-
-&internal_phy {
- status = "okay";
- pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
- pinctrl-names = "default";
-};
-
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&uart_C {
- status = "okay";
- pinctrl-0 = <&uart_c_pins>;
- pinctrl-names = "default";
-};
-
-&uart_AO_B {
- status = "okay";
- pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-};
-
-&i2c_B {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_b_pins>;
-
- pcf8563: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- status = "okay";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
- */
-
-/dts-v1/;
-
-#include "meson-gxl-s905x-p212.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
- compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
- model = "Khadas VIM";
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1710000>;
-
- button-function {
- label = "Function";
- linux,code = <KEY_FN>;
- press-threshold-microvolt = <10000>;
- };
- };
-
- aliases {
- serial2 = &uart_AO_B;
- ethernet0 = ðmac;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- power-button {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
- };
- };
-
- led-controller {
- compatible = "pwm-leds";
-
- led-1 {
- label = "vim:red:power";
- pwms = <&pwm_AO_ab 1 7812500 0>;
- max-brightness = <255>;
- linux,default-trigger = "default-on";
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- sound {
- compatible = "amlogic,gx-sound-card";
- model = "KHADAS-VIM";
- assigned-clocks = <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
- };
-
- dai-link-1 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
- dai-format = "i2s";
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
- };
- };
-
- dai-link-2 {
- sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&aiu {
- status = "okay";
-};
-
-&cec_AO {
- status = "okay";
- pinctrl-0 = <&ao_cec_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&hdmi_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&i2c_A {
- status = "okay";
- pinctrl-0 = <&i2c_a_pins>;
- pinctrl-names = "default";
-};
-
-&i2c_B {
- status = "okay";
- pinctrl-0 = <&i2c_b_pins>;
- pinctrl-names = "default";
-
- rtc: rtc@51 {
- status = "okay";
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-output-names = "xin32k";
- };
-};
-
-&ir {
- linux,rc-map-name = "rc-khadas";
-};
-
-&gpio_ao {
- gpio-line-names = "UART TX",
- "UART RX",
- "Power Key In",
- "J9 Header Pin35",
- "J9 Header Pin16",
- "J9 Header Pin15",
- "J9 Header Pin33",
- "IR In",
- "HDMI CEC",
- "SYS LED",
- /* GPIO_TEST_N */
- "";
-};
-
-&gpio {
- gpio-line-names = /* Bank GPIOZ */
- "", "", "", "", "", "", "",
- "", "", "", "", "", "", "",
- "Power OFF",
- "VCCK Enable",
- /* Bank GPIOH */
- "HDMI HPD", "HDMI SDA", "HDMI SCL",
- "HDMI_5V_EN", "SPDIF",
- "J9 Header Pin37",
- "J9 Header Pin30",
- "J9 Header Pin29",
- "J9 Header Pin32",
- "J9 Header Pin31",
- /* Bank BOOT */
- "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
- "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
- "eMMC Clk", "eMMC Reset", "eMMC CMD",
- "", "BOOT_MODE", "", "", "eMMC Data Strobe",
- /* Bank CARD */
- "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
- "SDCard D3", "SDCard D2", "SDCard Det",
- /* Bank GPIODV */
- "", "", "", "", "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "", "", "", "", "",
- "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
- "VCCK Regulator", "VDDEE Regulator",
- /* Bank GPIOX */
- "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
- "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
- "WIFI Power Enable", "WIFI WAKE HOST",
- "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
- "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
- "Bluetooth UART TX", "Bluetooth UART RX",
- "Bluetooth UART CTS", "Bluetooth UART RTS",
- "WIFI 32K", "Bluetooth Enable",
- "Bluetooth WAKE HOST",
- /* Bank GPIOCLK */
- "", "J9 Header Pin39";
-};
-
-&pwm_AO_ab {
- status = "okay";
- pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
- pinctrl-names = "default";
- clocks = <&xtal> , <&xtal>;
- clock-names = "clkin0", "clkin1" ;
-};
-
-&pwm_ef {
- pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
-};
-
-&sd_emmc_a {
- max-frequency = <100000000>;
-};
-
-/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
-&uart_AO {
- status = "okay";
-};
-
-/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
-&uart_AO_B {
- status = "okay";
- pinctrl-0 = <&uart_ao_b_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- dr_mode = "peripheral";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 BayLibre, SAS.
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-#include "meson-gxl-s905x.dtsi"
-
-/ {
- compatible = "libretech,aml-s905x-cc-v2", "amlogic,s905x",
- "amlogic,meson-gxl";
- model = "Libre Computer AML-S905X-CC V2";
-
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- spi0 = &spifc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-blue {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- panic-indicator;
- };
-
- led-green {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_DISK_ACTIVITY;
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "disk-activity";
- };
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- ao_5v: regulator-ao_5v {
- compatible = "regulator-fixed";
- regulator-name = "AO_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
- };
-
- dc_in: regulator-dc_in {
- compatible = "regulator-fixed";
- regulator-name = "DC_IN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vcck: regulator-vcck {
- compatible = "regulator-fixed";
- regulator-name = "VCCK";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&ao_5v>;
- regulator-always-on;
- };
-
- vcc_card: regulator-vcc_card {
- compatible = "regulator-fixed";
- regulator-name = "VCC_CARD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddio_ao3v3>;
-
- gpio = <&gpio GPIOCLK_1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vcc5v: regulator-vcc5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&ao_5v>;
-
- gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
- };
-
- vddio_ao3v3: regulator-vddio_ao3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&ao_5v>;
- regulator-always-on;
- };
-
- vddio_card: regulator-vddio-card {
- compatible = "regulator-gpio";
- regulator-name = "VDDIO_CARD";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
- gpios-states = <0>;
-
- states = <3300000 0>,
- <1800000 1>;
-
- regulator-settling-time-up-us = <200>;
- regulator-settling-time-down-us = <50000>;
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddio_ao3v3>;
- regulator-always-on;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC 1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddio_ao3v3>;
- regulator-always-on;
- };
-
- sound {
- compatible = "amlogic,gx-sound-card";
- model = "LIBRETECH-CC-V2";
- assigned-clocks = <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
- };
-
- dai-link-1 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
- dai-format = "i2s";
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
- };
- };
-
- dai-link-2 {
- sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&aiu {
- status = "okay";
-};
-
-&cec_AO {
- status = "okay";
- pinctrl-0 = <&ao_cec_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-ðmac {
- status = "okay";
-};
-
-&internal_phy {
- pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
- pinctrl-names = "default";
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- hdmi-supply = <&vcc5v>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_ao18>;
-};
-
-/* SD card */
-&sd_emmc_b {
- pinctrl-0 = <&sdcard_pins>;
- pinctrl-1 = <&sdcard_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-ddr50;
- max-frequency = <100000000>;
- disable-wp;
-
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
- vmmc-supply = <&vcc_card>;
- vqmmc-supply = <&vddio_card>;
-
- status = "okay";
-};
-
-/* eMMC */
-&sd_emmc_c {
- pinctrl-0 = <&emmc_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vddio_ao3v3>;
- vqmmc-supply = <&vcc_1v8>;
-
- status = "okay";
-};
-
-&spifc {
- status = "okay";
- pinctrl-0 = <&nor_pins>;
- pinctrl-names = "default";
-
- nor_4u1: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <3000000>;
- };
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "host";
-};
-
-&usb2_phy0 {
- phy-supply = <&vcc5v>;
-};
-
-&usb2_phy1 {
- phy-supply = <&vcc5v>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-#include "meson-gxl-s905x.dtsi"
-
-/ {
- compatible = "libretech,aml-s905x-cc", "amlogic,s905x",
- "amlogic,meson-gxl";
- model = "Libre Computer AML-S905X-CC";
-
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- dio2133: analog-amplifier {
- compatible = "simple-audio-amplifier";
- sound-name-prefix = "AU2";
- VCC-supply = <&hdmi_5v>;
- enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cvbs-connector {
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-system {
- label = "librecomputer:system-status";
- gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- panic-indicator;
- };
-
- led-blue {
- label = "librecomputer:blue";
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- hdmi_5v: regulator-hdmi-5v {
- compatible = "regulator-fixed";
-
- regulator-name = "HDMI_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc_card: regulator-vcc-card {
- compatible = "regulator-gpio";
-
- regulator-name = "VCC_CARD";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
- gpios-states = <0>;
-
- states = <3300000 0>,
- <1800000 1>;
-
- regulator-settling-time-up-us = <200>;
- regulator-settling-time-down-us = <50000>;
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- /* This is provided by LDOs on the eMMC daugther card */
- vddio_boot: regulator-vddio_boot {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- };
-
- sound {
- compatible = "amlogic,gx-sound-card";
- model = "LIBRETECH-CC";
- audio-aux-devs = <&dio2133>;
- audio-widgets = "Line", "Lineout";
- audio-routing = "AU2 INL", "ACODEC LOLN",
- "AU2 INR", "ACODEC LORN",
- "Lineout", "AU2 OUTL",
- "Lineout", "AU2 OUTR";
- assigned-clocks = <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
- };
-
- dai-link-1 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
- dai-format = "i2s";
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
- };
-
- codec-1 {
- sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
- };
- };
-
- dai-link-2 {
- sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&hdmi_tx>;
- };
- };
-
- dai-link-3 {
- sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&acodec>;
- };
- };
- };
-};
-
-&acodec {
- AVDD-supply = <&vddio_ao18>;
- status = "okay";
-};
-
-&aiu {
- status = "okay";
-};
-
-&cec_AO {
- status = "okay";
- pinctrl-0 = <&ao_cec_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-ðmac {
- status = "okay";
-};
-
-&internal_phy {
- pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
- pinctrl-names = "default";
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&hdmi_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&gpio_ao {
- gpio-line-names = "UART TX",
- "UART RX",
- "Blue LED",
- "SDCard Voltage Switch",
- "7J1 Header Pin5",
- "7J1 Header Pin3",
- "7J1 Header Pin12",
- "IR In",
- "9J3 Switch HDMI CEC/7J1 Header Pin11",
- "7J1 Header Pin13",
- /* GPIO_TEST_N */
- "7J1 Header Pin15";
-};
-
-&gpio {
- gpio-line-names = /* Bank GPIOZ */
- "", "", "", "", "", "", "",
- "", "", "", "", "", "", "",
- "Eth Link LED", "Eth Activity LED",
- /* Bank GPIOH */
- "HDMI HPD", "HDMI SDA", "HDMI SCL",
- "HDMI_5V_EN", "9J1 Header Pin2",
- "Analog Audio Mute",
- "2J3 Header Pin6",
- "2J3 Header Pin5",
- "2J3 Header Pin4",
- "2J3 Header Pin3",
- /* Bank BOOT */
- "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
- "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
- "eMMC Clk", "eMMC Reset", "eMMC CMD",
- "ALT BOOT MODE", "", "", "", "eMMC Data Strobe",
- /* Bank CARD */
- "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
- "SDCard D3", "SDCard D2", "SDCard Det",
- /* Bank GPIODV */
- "", "", "", "", "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "", "", "", "", "",
- "Green LED", "VCCK Enable",
- "7J1 Header Pin27", "7J1 Header Pin28",
- "VCCK Regulator", "VDDEE Regulator",
- /* Bank GPIOX */
- "7J1 Header Pin22", "7J1 Header Pin26",
- "7J1 Header Pin36", "7J1 Header Pin38",
- "7J1 Header Pin40", "7J1 Header Pin37",
- "7J1 Header Pin33", "7J1 Header Pin35",
- "7J1 Header Pin19", "7J1 Header Pin21",
- "7J1 Header Pin24", "7J1 Header Pin23",
- "7J1 Header Pin8", "7J1 Header Pin10",
- "7J1 Header Pin16", "7J1 Header Pin18",
- "7J1 Header Pin32", "7J1 Header Pin29",
- "7J1 Header Pin31",
- /* Bank GPIOCLK */
- "7J1 Header Pin7", "";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_ao18>;
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_pins>;
- pinctrl-1 = <&sdcard_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vcc_card>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- max-frequency = <200000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "host";
-};
-
-&usb2_phy0 {
- /*
- * even though the schematics don't show it:
- * HDMI_5V is also used as supply for the USB VBUS.
- */
- phy-supply = <&hdmi_5v>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxl-s905x-p212.dtsi"
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
- compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
- model = "Amlogic Meson GXL (S905X) P212 Development Board";
-
- dio2133: analog-amplifier {
- compatible = "simple-audio-amplifier";
- sound-name-prefix = "AU2";
- VCC-supply = <&hdmi_5v>;
- enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
- };
-
- cvbs-connector {
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- sound {
- compatible = "amlogic,gx-sound-card";
- model = "S905X-P212";
- audio-aux-devs = <&dio2133>;
- audio-widgets = "Line", "Lineout";
- audio-routing = "AU2 INL", "ACODEC LOLN",
- "AU2 INR", "ACODEC LORN",
- "Lineout", "AU2 OUTL",
- "Lineout", "AU2 OUTR";
- assigned-clocks = <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- dai-link-0 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
- };
-
- dai-link-1 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
- dai-format = "i2s";
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
- };
-
- codec-1 {
- sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
- };
- };
-
- dai-link-2 {
- sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&hdmi_tx>;
- };
- };
-
- dai-link-3 {
- sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&acodec>;
- };
- };
- };
-};
-
-&acodec {
- AVDD-supply = <&vddio_ao18>;
- status = "okay";
-};
-
-&aiu {
- status = "okay";
-};
-
-&cec_AO {
- status = "okay";
- pinctrl-0 = <&ao_cec_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&hdmi_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
- * Based on meson-gx-p23x-q20x.dtsi:
- * - Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- * - Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/* Common DTSI for devices which are based on the P212 reference board. */
-
-#include "meson-gxl-s905x.dtsi"
-
-/ {
- aliases {
- serial0 = &uart_AO;
- ethernet0 = ðmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- hdmi_5v: regulator-hdmi-5v {
- compatible = "regulator-fixed";
-
- regulator-name = "HDMI_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- vddio_boot: regulator-vddio_boot {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-};
-
-ðmac {
- status = "okay";
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_ao18>;
-};
-
-/* Wireless SDIO Module */
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power to be kept while in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_pins>;
- pinctrl-1 = <&sdcard_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/* This is connected to the Bluetooth module: */
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- max-speed = <2000000>;
- clocks = <&wifi32k>;
- clock-names = "lpo";
- };
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- dr_mode = "host";
-};
-
-&usb2_phy0 {
- /*
- * HDMI_5V is also used as supply for the USB VBUS.
- */
- phy-supply = <&hdmi_5v>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include "meson-gxl.dtsi"
-#include "meson-gxl-mali.dtsi"
-
-/ {
- compatible = "amlogic,s905x", "amlogic,meson-gxl";
-};
-
-/* S905X only has access to its internal PHY */
-ðmac {
- phy-mode = "rmii";
- phy-handle = <&internal_phy>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include "meson-gx.dtsi"
-#include <dt-bindings/clock/gxbb-clkc.h>
-#include <dt-bindings/clock/gxbb-aoclkc.h>
-#include <dt-bindings/gpio/meson-gxl-gpio.h>
-#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
-
-/ {
- compatible = "amlogic,meson-gxl";
-
- soc {
- usb: usb@d0078080 {
- compatible = "amlogic,meson-gxl-usb-ctrl";
- reg = <0x0 0xd0078080 0x0 0x20>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
- clock-names = "usb_ctrl", "ddr";
- resets = <&reset RESET_USB_OTG>;
-
- dr_mode = "otg";
-
- phys = <&usb2_phy0>, <&usb2_phy1>;
- phy-names = "usb2-phy0", "usb2-phy1";
-
- dwc2: usb@c9100000 {
- compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
- reg = <0x0 0xc9100000 0x0 0x40000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_USB1>;
- clock-names = "otg";
- phys = <&usb2_phy1>;
- dr_mode = "peripheral";
- g-rx-fifo-size = <192>;
- g-np-tx-fifo-size = <128>;
- g-tx-fifo-size = <128 128 16 16 16>;
- };
-
- dwc3: usb@c9000000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xc9000000 0x0 0x100000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- maximum-speed = "high-speed";
- snps,dis_u2_susphy_quirk;
- };
- };
-
- acodec: audio-controller@c8832000 {
- compatible = "amlogic,t9015";
- reg = <0x0 0xc8832000 0x0 0x14>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "ACODEC";
- clocks = <&clkc CLKID_ACODEC>;
- clock-names = "pclk";
- resets = <&reset RESET_ACODEC>;
- status = "disabled";
- };
-
- crypto: crypto@c883e000 {
- compatible = "amlogic,gxl-crypto";
- reg = <0x0 0xc883e000 0x0 0x36>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_BLKMV>;
- clock-names = "blkmv";
- status = "okay";
- };
- };
-};
-
-&aiu {
- compatible = "amlogic,aiu-gxl", "amlogic,aiu";
- clocks = <&clkc CLKID_AIU_GLUE>,
- <&clkc CLKID_I2S_OUT>,
- <&clkc CLKID_AOCLK_GATE>,
- <&clkc CLKID_CTS_AMCLK>,
- <&clkc CLKID_MIXER_IFACE>,
- <&clkc CLKID_IEC958>,
- <&clkc CLKID_IEC958_GATE>,
- <&clkc CLKID_CTS_MCLK_I958>,
- <&clkc CLKID_CTS_I958>;
- clock-names = "pclk",
- "i2s_pclk",
- "i2s_aoclk",
- "i2s_mclk",
- "i2s_mixer",
- "spdif_pclk",
- "spdif_aoclk",
- "spdif_mclk",
- "spdif_mclk_sel";
- resets = <&reset RESET_AIU>;
-};
-
-&apb {
- usb2_phy0: phy@78000 {
- compatible = "amlogic,meson-gxl-usb2-phy";
- #phy-cells = <0>;
- reg = <0x0 0x78000 0x0 0x20>;
- clocks = <&clkc CLKID_USB>;
- clock-names = "phy";
- resets = <&reset RESET_USB_OTG>;
- reset-names = "phy";
- status = "okay";
- };
-
- usb2_phy1: phy@78020 {
- compatible = "amlogic,meson-gxl-usb2-phy";
- #phy-cells = <0>;
- reg = <0x0 0x78020 0x0 0x20>;
- clocks = <&clkc CLKID_USB>;
- clock-names = "phy";
- resets = <&reset RESET_USB_OTG>;
- reset-names = "phy";
- status = "okay";
- };
-};
-
-&efuse {
- clocks = <&clkc CLKID_EFUSE>;
-};
-
-ðmac {
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
-
- mdio0: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- };
-};
-
-&aobus {
- pinctrl_aobus: pinctrl@14 {
- compatible = "amlogic,meson-gxl-aobus-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio_ao: bank@14 {
- reg = <0x0 0x00014 0x0 0x8>,
- <0x0 0x0002c 0x0 0x4>,
- <0x0 0x00024 0x0 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_aobus 0 0 14>;
- };
-
- uart_ao_a_pins: uart_ao_a {
- mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a";
- function = "uart_ao";
- bias-disable;
- };
- };
-
- uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
- mux {
- groups = "uart_cts_ao_a",
- "uart_rts_ao_a";
- function = "uart_ao";
- bias-disable;
- };
- };
-
- uart_ao_b_pins: uart_ao_b {
- mux {
- groups = "uart_tx_ao_b", "uart_rx_ao_b";
- function = "uart_ao_b";
- bias-disable;
- };
- };
-
- uart_ao_b_0_1_pins: uart_ao_b_0_1 {
- mux {
- groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
- function = "uart_ao_b";
- bias-disable;
- };
- };
-
- uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
- mux {
- groups = "uart_cts_ao_b",
- "uart_rts_ao_b";
- function = "uart_ao_b";
- bias-disable;
- };
- };
-
- remote_input_ao_pins: remote_input_ao {
- mux {
- groups = "remote_input_ao";
- function = "remote_input_ao";
- bias-disable;
- };
- };
-
- i2c_ao_pins: i2c_ao {
- mux {
- groups = "i2c_sck_ao",
- "i2c_sda_ao";
- function = "i2c_ao";
- bias-disable;
- };
- };
-
- pwm_ao_a_3_pins: pwm_ao_a_3 {
- mux {
- groups = "pwm_ao_a_3";
- function = "pwm_ao_a";
- bias-disable;
- };
- };
-
- pwm_ao_a_8_pins: pwm_ao_a_8 {
- mux {
- groups = "pwm_ao_a_8";
- function = "pwm_ao_a";
- bias-disable;
- };
- };
-
- pwm_ao_b_pins: pwm_ao_b {
- mux {
- groups = "pwm_ao_b";
- function = "pwm_ao_b";
- bias-disable;
- };
- };
-
- pwm_ao_b_6_pins: pwm_ao_b_6 {
- mux {
- groups = "pwm_ao_b_6";
- function = "pwm_ao_b";
- bias-disable;
- };
- };
-
- i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
- mux {
- groups = "i2s_out_ch23_ao";
- function = "i2s_out_ao";
- bias-disable;
- };
- };
-
- i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
- mux {
- groups = "i2s_out_ch45_ao";
- function = "i2s_out_ao";
- bias-disable;
- };
- };
-
- spdif_out_ao_6_pins: spdif_out_ao_6 {
- mux {
- groups = "spdif_out_ao_6";
- function = "spdif_out_ao";
- bias-disable;
- };
- };
-
- spdif_out_ao_9_pins: spdif_out_ao_9 {
- mux {
- groups = "spdif_out_ao_9";
- function = "spdif_out_ao";
- bias-disable;
- };
- };
-
- ao_cec_pins: ao_cec {
- mux {
- groups = "ao_cec";
- function = "cec_ao";
- bias-disable;
- };
- };
-
- ee_cec_pins: ee_cec {
- mux {
- groups = "ee_cec";
- function = "cec_ao";
- bias-disable;
- };
- };
- };
-};
-
-&cec_AO {
- clocks = <&clkc_AO CLKID_AO_CEC_32K>;
- clock-names = "core";
-};
-
-&clkc_AO {
- compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
- clocks = <&xtal>, <&clkc CLKID_CLK81>;
- clock-names = "xtal", "mpeg-clk";
-};
-
-&gpio_intc {
- compatible = "amlogic,meson-gxl-gpio-intc",
- "amlogic,meson-gpio-intc";
- status = "okay";
-};
-
-&hdmi_tx {
- compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
- resets = <&reset RESET_HDMITX_CAPB3>,
- <&reset RESET_HDMI_SYSTEM_RESET>,
- <&reset RESET_HDMI_TX>;
- reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
- <&clkc CLKID_GCLK_VENCI_INT0>;
- clock-names = "isfr", "iahb", "venci";
-};
-
-&sysctrl {
- clkc: clock-controller {
- compatible = "amlogic,gxl-clkc";
- #clock-cells = <1>;
- clocks = <&xtal>;
- clock-names = "xtal";
- };
-};
-
-&hwrng {
- clocks = <&clkc CLKID_RNG0>;
- clock-names = "core";
-};
-
-&i2c_A {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
- clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&periphs {
- pinctrl_periphs: pinctrl@4b0 {
- compatible = "amlogic,meson-gxl-periphs-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio: bank@4b0 {
- reg = <0x0 0x004b0 0x0 0x28>,
- <0x0 0x004e8 0x0 0x14>,
- <0x0 0x00520 0x0 0x14>,
- <0x0 0x00430 0x0 0x40>;
- reg-names = "mux", "pull", "pull-enable", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_periphs 0 0 100>;
- };
-
- emmc_pins: emmc {
- mux-0 {
- groups = "emmc_nand_d07",
- "emmc_cmd";
- function = "emmc";
- bias-pull-up;
- };
-
- mux-1 {
- groups = "emmc_clk";
- function = "emmc";
- bias-disable;
- };
- };
-
- emmc_ds_pins: emmc-ds {
- mux {
- groups = "emmc_ds";
- function = "emmc";
- bias-pull-down;
- };
- };
-
- emmc_clk_gate_pins: emmc_clk_gate {
- mux {
- groups = "BOOT_8";
- function = "gpio_periphs";
- bias-pull-down;
- };
- };
-
- nor_pins: nor {
- mux {
- groups = "nor_d",
- "nor_q",
- "nor_c",
- "nor_cs";
- function = "nor";
- bias-disable;
- };
- };
-
- spi_pins: spi-pins {
- mux {
- groups = "spi_miso",
- "spi_mosi",
- "spi_sclk";
- function = "spi";
- bias-disable;
- };
- };
-
- spi_idle_high_pins: spi-idle-high-pins {
- mux {
- groups = "spi_sclk";
- bias-pull-up;
- };
- };
-
- spi_idle_low_pins: spi-idle-low-pins {
- mux {
- groups = "spi_sclk";
- bias-pull-down;
- };
- };
-
- spi_ss0_pins: spi-ss0 {
- mux {
- groups = "spi_ss0";
- function = "spi";
- bias-disable;
- };
- };
-
- sdcard_pins: sdcard {
- mux-0 {
- groups = "sdcard_d0",
- "sdcard_d1",
- "sdcard_d2",
- "sdcard_d3",
- "sdcard_cmd";
- function = "sdcard";
- bias-pull-up;
- };
-
- mux-1 {
- groups = "sdcard_clk";
- function = "sdcard";
- bias-disable;
- };
- };
-
- sdcard_clk_gate_pins: sdcard_clk_gate {
- mux {
- groups = "CARD_2";
- function = "gpio_periphs";
- bias-pull-down;
- };
- };
-
- sdio_pins: sdio {
- mux-0 {
- groups = "sdio_d0",
- "sdio_d1",
- "sdio_d2",
- "sdio_d3",
- "sdio_cmd";
- function = "sdio";
- bias-pull-up;
- };
-
- mux-1 {
- groups = "sdio_clk";
- function = "sdio";
- bias-disable;
- };
- };
-
- sdio_clk_gate_pins: sdio_clk_gate {
- mux {
- groups = "GPIOX_4";
- function = "gpio_periphs";
- bias-pull-down;
- };
- };
-
- sdio_irq_pins: sdio_irq {
- mux {
- groups = "sdio_irq";
- function = "sdio";
- bias-disable;
- };
- };
-
- uart_a_pins: uart_a {
- mux {
- groups = "uart_tx_a",
- "uart_rx_a";
- function = "uart_a";
- bias-disable;
- };
- };
-
- uart_a_cts_rts_pins: uart_a_cts_rts {
- mux {
- groups = "uart_cts_a",
- "uart_rts_a";
- function = "uart_a";
- bias-disable;
- };
- };
-
- uart_b_pins: uart_b {
- mux {
- groups = "uart_tx_b",
- "uart_rx_b";
- function = "uart_b";
- bias-disable;
- };
- };
-
- uart_b_cts_rts_pins: uart_b_cts_rts {
- mux {
- groups = "uart_cts_b",
- "uart_rts_b";
- function = "uart_b";
- bias-disable;
- };
- };
-
- uart_c_pins: uart_c {
- mux {
- groups = "uart_tx_c",
- "uart_rx_c";
- function = "uart_c";
- bias-disable;
- };
- };
-
- uart_c_cts_rts_pins: uart_c_cts_rts {
- mux {
- groups = "uart_cts_c",
- "uart_rts_c";
- function = "uart_c";
- bias-disable;
- };
- };
-
- i2c_a_pins: i2c_a {
- mux {
- groups = "i2c_sck_a",
- "i2c_sda_a";
- function = "i2c_a";
- bias-disable;
- };
- };
-
- i2c_b_pins: i2c_b {
- mux {
- groups = "i2c_sck_b",
- "i2c_sda_b";
- function = "i2c_b";
- bias-disable;
- };
- };
-
- i2c_c_pins: i2c_c {
- mux {
- groups = "i2c_sck_c",
- "i2c_sda_c";
- function = "i2c_c";
- bias-disable;
- };
- };
-
- i2c_c_dv18_pins: i2c_c_dv18 {
- mux {
- groups = "i2c_sck_c_dv19",
- "i2c_sda_c_dv18";
- function = "i2c_c";
- bias-disable;
- };
- };
-
- eth_pins: eth_c {
- mux {
- groups = "eth_mdio",
- "eth_mdc",
- "eth_clk_rx_clk",
- "eth_rx_dv",
- "eth_rxd0",
- "eth_rxd1",
- "eth_rxd2",
- "eth_rxd3",
- "eth_rgmii_tx_clk",
- "eth_tx_en",
- "eth_txd0",
- "eth_txd1",
- "eth_txd2",
- "eth_txd3";
- function = "eth";
- bias-disable;
- };
- };
-
- eth_link_led_pins: eth_link_led {
- mux {
- groups = "eth_link_led";
- function = "eth_led";
- bias-disable;
- };
- };
-
- eth_act_led_pins: eth_act_led {
- mux {
- groups = "eth_act_led";
- function = "eth_led";
- };
- };
-
- pwm_a_pins: pwm_a {
- mux {
- groups = "pwm_a";
- function = "pwm_a";
- bias-disable;
- };
- };
-
- pwm_b_pins: pwm_b {
- mux {
- groups = "pwm_b";
- function = "pwm_b";
- bias-disable;
- };
- };
-
- pwm_c_pins: pwm_c {
- mux {
- groups = "pwm_c";
- function = "pwm_c";
- bias-disable;
- };
- };
-
- pwm_d_pins: pwm_d {
- mux {
- groups = "pwm_d";
- function = "pwm_d";
- bias-disable;
- };
- };
-
- pwm_e_pins: pwm_e {
- mux {
- groups = "pwm_e";
- function = "pwm_e";
- bias-disable;
- };
- };
-
- pwm_f_clk_pins: pwm_f_clk {
- mux {
- groups = "pwm_f_clk";
- function = "pwm_f";
- bias-disable;
- };
- };
-
- pwm_f_x_pins: pwm_f_x {
- mux {
- groups = "pwm_f_x";
- function = "pwm_f";
- bias-disable;
- };
- };
-
- hdmi_hpd_pins: hdmi_hpd {
- mux {
- groups = "hdmi_hpd";
- function = "hdmi_hpd";
- bias-disable;
- };
- };
-
- hdmi_i2c_pins: hdmi_i2c {
- mux {
- groups = "hdmi_sda", "hdmi_scl";
- function = "hdmi_i2c";
- bias-disable;
- };
- };
-
- i2s_am_clk_pins: i2s_am_clk {
- mux {
- groups = "i2s_am_clk";
- function = "i2s_out";
- bias-disable;
- };
- };
-
- i2s_out_ao_clk_pins: i2s_out_ao_clk {
- mux {
- groups = "i2s_out_ao_clk";
- function = "i2s_out";
- bias-disable;
- };
- };
-
- i2s_out_lr_clk_pins: i2s_out_lr_clk {
- mux {
- groups = "i2s_out_lr_clk";
- function = "i2s_out";
- bias-disable;
- };
- };
-
- i2s_out_ch01_pins: i2s_out_ch01 {
- mux {
- groups = "i2s_out_ch01";
- function = "i2s_out";
- bias-disable;
- };
- };
- i2sout_ch23_z_pins: i2sout_ch23_z {
- mux {
- groups = "i2sout_ch23_z";
- function = "i2s_out";
- bias-disable;
- };
- };
-
- i2sout_ch45_z_pins: i2sout_ch45_z {
- mux {
- groups = "i2sout_ch45_z";
- function = "i2s_out";
- bias-disable;
- };
- };
-
- i2sout_ch67_z_pins: i2sout_ch67_z {
- mux {
- groups = "i2sout_ch67_z";
- function = "i2s_out";
- bias-disable;
- };
- };
-
- spdif_out_h_pins: spdif_out_ao_h {
- mux {
- groups = "spdif_out_h";
- function = "spdif_out";
- bias-disable;
- };
- };
- };
-
- eth_phy_mux: mdio@558 {
- reg = <0x0 0x558 0x0 0xc>;
- compatible = "amlogic,gxl-mdio-mux";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "ref";
- mdio-parent-bus = <&mdio0>;
-
- external_mdio: mdio@0 {
- reg = <0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- internal_mdio: mdio@1 {
- reg = <0x1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- internal_phy: ethernet-phy@8 {
- compatible = "ethernet-phy-id0181.4400";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <8>;
- max-speed = <100>;
- };
- };
- };
-};
-
-&pwrc {
- resets = <&reset RESET_VIU>,
- <&reset RESET_VENC>,
- <&reset RESET_VCBUS>,
- <&reset RESET_BT656>,
- <&reset RESET_DVIN_RESET>,
- <&reset RESET_RDMA>,
- <&reset RESET_VENCI>,
- <&reset RESET_VENCP>,
- <&reset RESET_VDAC>,
- <&reset RESET_VDI6>,
- <&reset RESET_VENCL>,
- <&reset RESET_VID_LOCK>;
- reset-names = "viu", "venc", "vcbus", "bt656",
- "dvin", "rdma", "venci", "vencp",
- "vdac", "vdi6", "vencl", "vid_lock";
- clocks = <&clkc CLKID_VPU>,
- <&clkc CLKID_VAPB>;
- clock-names = "vpu", "vapb";
- /*
- * VPU clocking is provided by two identical clock paths
- * VPU_0 and VPU_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- * Same for VAPB but with a final gate after the glitch free mux.
- */
- assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
- <&clkc CLKID_VPU_0>,
- <&clkc CLKID_VPU>, /* Glitch free mux */
- <&clkc CLKID_VAPB_0_SEL>,
- <&clkc CLKID_VAPB_0>,
- <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
- assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
- <0>, /* Do Nothing */
- <&clkc CLKID_VPU_0>,
- <&clkc CLKID_FCLK_DIV4>,
- <0>, /* Do Nothing */
- <&clkc CLKID_VAPB_0>;
- assigned-clock-rates = <0>, /* Do Nothing */
- <666666666>,
- <0>, /* Do Nothing */
- <0>, /* Do Nothing */
- <250000000>,
- <0>; /* Do Nothing */
-};
-
-&saradc {
- compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
- clocks = <&xtal>,
- <&clkc CLKID_SAR_ADC>,
- <&clkc CLKID_SAR_ADC_CLK>,
- <&clkc CLKID_SAR_ADC_SEL>;
- clock-names = "clkin", "core", "adc_clk", "adc_sel";
-};
-
-&sd_emmc_a {
- clocks = <&clkc CLKID_SD_EMMC_A>,
- <&clkc CLKID_SD_EMMC_A_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_A>;
-};
-
-&sd_emmc_b {
- clocks = <&clkc CLKID_SD_EMMC_B>,
- <&clkc CLKID_SD_EMMC_B_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_B>;
-};
-
-&sd_emmc_c {
- clocks = <&clkc CLKID_SD_EMMC_C>,
- <&clkc CLKID_SD_EMMC_C_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_C>;
-};
-
-&simplefb_hdmi {
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
- <&clkc CLKID_GCLK_VENCI_INT0>;
-};
-
-&spicc {
- clocks = <&clkc CLKID_SPICC>;
- clock-names = "core";
- resets = <&reset RESET_PERIPHS_SPICC>;
- num-cs = <1>;
-};
-
-&spifc {
- clocks = <&clkc CLKID_SPI>;
-};
-
-&uart_A {
- clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_AO {
- clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_AO_B {
- clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_B {
- clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_C {
- clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&vpu {
- compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
- power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
-};
-
-&vdec {
- compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
- clocks = <&clkc CLKID_DOS_PARSER>,
- <&clkc CLKID_DOS>,
- <&clkc CLKID_VDEC_1>,
- <&clkc CLKID_VDEC_HEVC>;
- clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
- resets = <&reset RESET_PARSER>;
- reset-names = "esparser";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxm.dtsi"
-#include "meson-gx-p23x-q20x.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm";
- model = "Beelink GT1 Ultimate";
-
- leds {
- compatible = "gpio-leds";
-
- led-white {
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_POWER;
- gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- panic-indicator;
- };
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1710000>;
-
- button-function {
- label = "update";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <10000>;
- };
- };
-};
-
-ðmac {
- pinctrl-0 = <ð_pins>;
- pinctrl-names = "default";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
- phy-mode = "rgmii";
-};
-
-&external_mdio {
- external_phy: ethernet-phy@0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_15 */
- interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&ir {
- linux,rc-map-name = "rc-beelink-gs1";
-};
-
-&sd_emmc_a {
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- max-speed = <2000000>;
- clocks = <&wifi32k>;
- clock-names = "lpo";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
- * Copyright (c) 2017 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxm.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
- compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
- model = "Khadas VIM2";
-
- aliases {
- serial0 = &uart_AO;
- serial2 = &uart_AO_B;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1710000>;
-
- button-function {
- label = "Function";
- linux,code = <KEY_FN>;
- press-threshold-microvolt = <10000>;
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- gpio_fan: gpio-fan {
- compatible = "gpio-fan";
- gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH
- &gpio GPIODV_15 GPIO_ACTIVE_HIGH>;
- /* Dummy RPM values since fan is optional */
- gpio-fan,speed-map =
- <0 0>,
- <1 1>,
- <2 2>,
- <3 3>;
- #cooling-cells = <2>;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- power-button {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
- led-controller {
- compatible = "pwm-leds";
-
- led-1 {
- label = "vim:red:power";
- pwms = <&pwm_AO_ab 1 7812500 0>;
- max-brightness = <255>;
- linux,default-trigger = "default-on";
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- hdmi_5v: regulator-hdmi-5v {
- compatible = "regulator-fixed";
-
- regulator-name = "HDMI_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vddio_boot: regulator-vddio_boot {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
-
- sound {
- compatible = "amlogic,gx-sound-card";
- model = "KHADAS-VIM2";
- assigned-clocks = <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>;
- assigned-clock-parents = <0>, <0>, <0>;
- assigned-clock-rates = <294912000>,
- <270950400>,
- <393216000>;
- status = "okay";
-
- dai-link-0 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
- };
-
- dai-link-1 {
- sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
- dai-format = "i2s";
- mclk-fs = <256>;
-
- codec-0 {
- sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
- };
- };
-
- dai-link-2 {
- sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
- codec-0 {
- sound-dai = <&hdmi_tx>;
- };
- };
- };
-};
-
-&aiu {
- status = "okay";
-};
-
-&cec_AO {
- status = "okay";
- pinctrl-0 = <&ao_cec_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cpu_cooling_maps {
- map0 {
- cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
- };
-
- map1 {
- cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-};
-
-ðmac {
- pinctrl-0 = <ð_pins>;
- pinctrl-names = "default";
-
- /* Select external PHY by default */
- phy-handle = <&external_phy>;
-
- amlogic,tx-delay-ns = <2>;
-
- /* External PHY is in RGMII */
- phy-mode = "rgmii";
-
- status = "okay";
-};
-
-&external_mdio {
- external_phy: ethernet-phy@0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
-
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_15 */
- interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&hdmi_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&i2c_A {
- status = "okay";
- pinctrl-0 = <&i2c_a_pins>;
- pinctrl-names = "default";
-};
-
-&i2c_B {
- status = "okay";
- pinctrl-0 = <&i2c_b_pins>;
- pinctrl-names = "default";
-
- rtc: rtc@51 {
- status = "okay";
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-output-names = "xin32k";
- };
-};
-
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
- linux,rc-map-name = "rc-khadas";
-};
-
-&pwm_AO_ab {
- status = "okay";
- pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-&pwm_ef {
- status = "okay";
- pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
- pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
-};
-
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <100000000>;
-
- non-removable;
- disable-wp;
-
- /* WiFi firmware requires power to be kept while in suspend */
- keep-power-in-suspend;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_pins>;
- pinctrl-1 = <&sdcard_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
-};
-
-/*
- * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe
- * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled
- */
-&spifc {
- status = "disabled";
- pinctrl-0 = <&nor_pins>;
- pinctrl-names = "default";
-
- w25q32: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q16", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- };
-};
-
-/* This one is connected to the Bluetooth module */
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- max-speed = <2000000>;
- clocks = <&wifi32k>;
- clock-names = "lpo";
- };
-};
-
-/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
-&uart_AO_B {
- status = "okay";
- pinctrl-0 = <&uart_ao_b_pins>;
- pinctrl-names = "default";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vddio_ao18>;
-};
-
-&usb {
- status = "okay";
- dr_mode = "peripheral";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 BayLibre SAS. All rights reserved.
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxm.dtsi"
-#include "meson-gx-libretech-pc.dtsi"
-
-/ {
- compatible = "libretech,aml-s912-pc", "amlogic,s912",
- "amlogic,meson-gxm";
- model = "Libre Computer AML-S912-PC";
-
- typec2_vbus: regulator-typec2_vbus {
- compatible = "regulator-fixed";
- regulator-name = "TYPEC2_VBUS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v>;
-
- gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&pinctrl_periphs {
- /*
- * Make sure the irq pin of the TYPE C controller is not driven
- * by the SoC.
- */
- fusb302_irq_pins: fusb302_irq {
- mux {
- groups = "GPIODV_0";
- function = "gpio_periphs";
- bias-pull-up;
- output-disable;
- };
- };
-};
-
-&i2c_C {
- fusb302@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
-
- pinctrl-0 = <&fusb302_irq_pins>;
- pinctrl-names = "default";
- interrupt-parent = <&gpio_intc>;
- interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
-
- vbus-supply = <&typec2_vbus>;
-
- status = "okay";
- };
-};
-
-&usb2_phy2 {
- phy-supply = <&typec2_vbus>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxm.dtsi"
-#include "meson-gx-p23x-q20x.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
- model = "WeTek Core 2";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-blue {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_STATUS;
- gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1710000>;
-
- button-update {
- label = "update";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <10000>;
- };
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- button-power {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-/* Disabled as Realtek RTL8152 USB provides Ethernet */
-ðmac {
- status = "disabled";
-};
-
-&internal_phy {
- status = "disabled";
-};
-
-&ir {
- linux,rc-map-name = "rc-wetek-play2";
-};
-
-/* This is connected to the Bluetooth module: */
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- max-speed = <2000000>;
- clocks = <&wifi32k>;
- clock-names = "lpo";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include "meson-gxl.dtsi"
-
-/ {
- compatible = "amlogic,meson-gxm";
-
- cpus {
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&cpu0>;
- };
- core1 {
- cpu = <&cpu1>;
- };
- core2 {
- cpu = <&cpu2>;
- };
- core3 {
- cpu = <&cpu3>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&cpu4>;
- };
- core1 {
- cpu = <&cpu5>;
- };
- core2 {
- cpu = <&cpu6>;
- };
- core3 {
- cpu = <&cpu7>;
- };
- };
- };
-
- cpu0: cpu@0 {
- capacity-dmips-mhz = <1024>;
- };
-
- cpu1: cpu@1 {
- capacity-dmips-mhz = <1024>;
- };
-
- cpu2: cpu@2 {
- capacity-dmips-mhz = <1024>;
- };
-
- cpu3: cpu@3 {
- capacity-dmips-mhz = <1024>;
- };
-
- cpu4: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x100>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 1>;
- #cooling-cells = <2>;
- };
-
- cpu5: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x101>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 1>;
- #cooling-cells = <2>;
- };
-
- cpu6: cpu@102 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x102>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 1>;
- #cooling-cells = <2>;
- };
-
- cpu7: cpu@103 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x103>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
- clocks = <&scpi_dvfs 1>;
- #cooling-cells = <2>;
- };
- };
-
- gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-125000000 {
- opp-hz = /bits/ 64 <125000000>;
- opp-microvolt = <950000>;
- };
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <950000>;
- };
- opp-285714285 {
- opp-hz = /bits/ 64 <285714285>;
- opp-microvolt = <950000>;
- };
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <950000>;
- };
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <950000>;
- };
- opp-666666666 {
- opp-hz = /bits/ 64 <666666666>;
- opp-microvolt = <950000>;
- };
- };
-};
-
-&apb {
- usb2_phy2: phy@78040 {
- compatible = "amlogic,meson-gxl-usb2-phy";
- #phy-cells = <0>;
- reg = <0x0 0x78040 0x0 0x20>;
- clocks = <&clkc CLKID_USB>;
- clock-names = "phy";
- resets = <&reset RESET_USB_OTG>;
- reset-names = "phy";
- status = "okay";
- };
-
- mali: gpu@c0000 {
- compatible = "amlogic,meson-gxm-mali", "arm,mali-t820";
- reg = <0x0 0xc0000 0x0 0x40000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "job", "mmu", "gpu";
- clocks = <&clkc CLKID_MALI>;
- resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
- operating-points-v2 = <&gpu_opp_table>;
- };
-};
-
-&clkc_AO {
- compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
-};
-
-&cpu_cooling_maps {
- map0 {
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- map1 {
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-};
-
-&saradc {
- compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
-};
-
-&scpi_dvfs {
- clock-indices = <0 1>;
- clock-output-names = "vbig", "vlittle";
-};
-
-&vpu {
- compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
-};
-
-&hdmi_tx {
- compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
-};
-
-&usb {
- compatible = "amlogic,meson-gxm-usb-ctrl";
-
- phy-names = "usb2-phy0", "usb2-phy1", "usb2-phy2";
- phys = <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
-};
-
-&vdec {
- compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec";
-};
+++ /dev/null
-/*
- * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
- * Author: Xingyu Chen <xingyu.chen@amlogic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _DT_BINDINGS_MESON_AXG_GPIO_H
-#define _DT_BINDINGS_MESON_AXG_GPIO_H
-
-/* First GPIO chip */
-#define GPIOAO_0 0
-#define GPIOAO_1 1
-#define GPIOAO_2 2
-#define GPIOAO_3 3
-#define GPIOAO_4 4
-#define GPIOAO_5 5
-#define GPIOAO_6 6
-#define GPIOAO_7 7
-#define GPIOAO_8 8
-#define GPIOAO_9 9
-#define GPIOAO_10 10
-#define GPIOAO_11 11
-#define GPIOAO_12 12
-#define GPIOAO_13 13
-#define GPIO_TEST_N 14
-
-/* Second GPIO chip */
-#define GPIOZ_0 0
-#define GPIOZ_1 1
-#define GPIOZ_2 2
-#define GPIOZ_3 3
-#define GPIOZ_4 4
-#define GPIOZ_5 5
-#define GPIOZ_6 6
-#define GPIOZ_7 7
-#define GPIOZ_8 8
-#define GPIOZ_9 9
-#define GPIOZ_10 10
-#define BOOT_0 11
-#define BOOT_1 12
-#define BOOT_2 13
-#define BOOT_3 14
-#define BOOT_4 15
-#define BOOT_5 16
-#define BOOT_6 17
-#define BOOT_7 18
-#define BOOT_8 19
-#define BOOT_9 20
-#define BOOT_10 21
-#define BOOT_11 22
-#define BOOT_12 23
-#define BOOT_13 24
-#define BOOT_14 25
-#define GPIOA_0 26
-#define GPIOA_1 27
-#define GPIOA_2 28
-#define GPIOA_3 29
-#define GPIOA_4 30
-#define GPIOA_5 31
-#define GPIOA_6 32
-#define GPIOA_7 33
-#define GPIOA_8 34
-#define GPIOA_9 35
-#define GPIOA_10 36
-#define GPIOA_11 37
-#define GPIOA_12 38
-#define GPIOA_13 39
-#define GPIOA_14 40
-#define GPIOA_15 41
-#define GPIOA_16 42
-#define GPIOA_17 43
-#define GPIOA_18 44
-#define GPIOA_19 45
-#define GPIOA_20 46
-#define GPIOX_0 47
-#define GPIOX_1 48
-#define GPIOX_2 49
-#define GPIOX_3 50
-#define GPIOX_4 51
-#define GPIOX_5 52
-#define GPIOX_6 53
-#define GPIOX_7 54
-#define GPIOX_8 55
-#define GPIOX_9 56
-#define GPIOX_10 57
-#define GPIOX_11 58
-#define GPIOX_12 59
-#define GPIOX_13 60
-#define GPIOX_14 61
-#define GPIOX_15 62
-#define GPIOX_16 63
-#define GPIOX_17 64
-#define GPIOX_18 65
-#define GPIOX_19 66
-#define GPIOX_20 67
-#define GPIOX_21 68
-#define GPIOX_22 69
-#define GPIOY_0 70
-#define GPIOY_1 71
-#define GPIOY_2 72
-#define GPIOY_3 73
-#define GPIOY_4 74
-#define GPIOY_5 75
-#define GPIOY_6 76
-#define GPIOY_7 77
-#define GPIOY_8 78
-#define GPIOY_9 79
-#define GPIOY_10 80
-#define GPIOY_11 81
-#define GPIOY_12 82
-#define GPIOY_13 83
-#define GPIOY_14 84
-#define GPIOY_15 85
-
-#endif /* _DT_BINDINGS_MESON_AXG_GPIO_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIO definitions for Amlogic Meson GXBB SoCs
- *
- * Copyright (C) 2016 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_GXBB_GPIO_H
-#define _DT_BINDINGS_MESON_GXBB_GPIO_H
-
-#define GPIOAO_0 0
-#define GPIOAO_1 1
-#define GPIOAO_2 2
-#define GPIOAO_3 3
-#define GPIOAO_4 4
-#define GPIOAO_5 5
-#define GPIOAO_6 6
-#define GPIOAO_7 7
-#define GPIOAO_8 8
-#define GPIOAO_9 9
-#define GPIOAO_10 10
-#define GPIOAO_11 11
-#define GPIOAO_12 12
-#define GPIOAO_13 13
-#define GPIO_TEST_N 14
-
-#define GPIOZ_0 0
-#define GPIOZ_1 1
-#define GPIOZ_2 2
-#define GPIOZ_3 3
-#define GPIOZ_4 4
-#define GPIOZ_5 5
-#define GPIOZ_6 6
-#define GPIOZ_7 7
-#define GPIOZ_8 8
-#define GPIOZ_9 9
-#define GPIOZ_10 10
-#define GPIOZ_11 11
-#define GPIOZ_12 12
-#define GPIOZ_13 13
-#define GPIOZ_14 14
-#define GPIOZ_15 15
-#define GPIOH_0 16
-#define GPIOH_1 17
-#define GPIOH_2 18
-#define GPIOH_3 19
-#define BOOT_0 20
-#define BOOT_1 21
-#define BOOT_2 22
-#define BOOT_3 23
-#define BOOT_4 24
-#define BOOT_5 25
-#define BOOT_6 26
-#define BOOT_7 27
-#define BOOT_8 28
-#define BOOT_9 29
-#define BOOT_10 30
-#define BOOT_11 31
-#define BOOT_12 32
-#define BOOT_13 33
-#define BOOT_14 34
-#define BOOT_15 35
-#define BOOT_16 36
-#define BOOT_17 37
-#define CARD_0 38
-#define CARD_1 39
-#define CARD_2 40
-#define CARD_3 41
-#define CARD_4 42
-#define CARD_5 43
-#define CARD_6 44
-#define GPIODV_0 45
-#define GPIODV_1 46
-#define GPIODV_2 47
-#define GPIODV_3 48
-#define GPIODV_4 49
-#define GPIODV_5 50
-#define GPIODV_6 51
-#define GPIODV_7 52
-#define GPIODV_8 53
-#define GPIODV_9 54
-#define GPIODV_10 55
-#define GPIODV_11 56
-#define GPIODV_12 57
-#define GPIODV_13 58
-#define GPIODV_14 59
-#define GPIODV_15 60
-#define GPIODV_16 61
-#define GPIODV_17 62
-#define GPIODV_18 63
-#define GPIODV_19 64
-#define GPIODV_20 65
-#define GPIODV_21 66
-#define GPIODV_22 67
-#define GPIODV_23 68
-#define GPIODV_24 69
-#define GPIODV_25 70
-#define GPIODV_26 71
-#define GPIODV_27 72
-#define GPIODV_28 73
-#define GPIODV_29 74
-#define GPIOY_0 75
-#define GPIOY_1 76
-#define GPIOY_2 77
-#define GPIOY_3 78
-#define GPIOY_4 79
-#define GPIOY_5 80
-#define GPIOY_6 81
-#define GPIOY_7 82
-#define GPIOY_8 83
-#define GPIOY_9 84
-#define GPIOY_10 85
-#define GPIOY_11 86
-#define GPIOY_12 87
-#define GPIOY_13 88
-#define GPIOY_14 89
-#define GPIOY_15 90
-#define GPIOY_16 91
-#define GPIOX_0 92
-#define GPIOX_1 93
-#define GPIOX_2 94
-#define GPIOX_3 95
-#define GPIOX_4 96
-#define GPIOX_5 97
-#define GPIOX_6 98
-#define GPIOX_7 99
-#define GPIOX_8 100
-#define GPIOX_9 101
-#define GPIOX_10 102
-#define GPIOX_11 103
-#define GPIOX_12 104
-#define GPIOX_13 105
-#define GPIOX_14 106
-#define GPIOX_15 107
-#define GPIOX_16 108
-#define GPIOX_17 109
-#define GPIOX_18 110
-#define GPIOX_19 111
-#define GPIOX_20 112
-#define GPIOX_21 113
-#define GPIOX_22 114
-#define GPIOCLK_0 115
-#define GPIOCLK_1 116
-#define GPIOCLK_2 117
-#define GPIOCLK_3 118
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIO definitions for Amlogic Meson GXL SoCs
- *
- * Copyright (C) 2016 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_GXL_GPIO_H
-#define _DT_BINDINGS_MESON_GXL_GPIO_H
-
-#define GPIOAO_0 0
-#define GPIOAO_1 1
-#define GPIOAO_2 2
-#define GPIOAO_3 3
-#define GPIOAO_4 4
-#define GPIOAO_5 5
-#define GPIOAO_6 6
-#define GPIOAO_7 7
-#define GPIOAO_8 8
-#define GPIOAO_9 9
-#define GPIO_TEST_N 10
-
-#define GPIOZ_0 0
-#define GPIOZ_1 1
-#define GPIOZ_2 2
-#define GPIOZ_3 3
-#define GPIOZ_4 4
-#define GPIOZ_5 5
-#define GPIOZ_6 6
-#define GPIOZ_7 7
-#define GPIOZ_8 8
-#define GPIOZ_9 9
-#define GPIOZ_10 10
-#define GPIOZ_11 11
-#define GPIOZ_12 12
-#define GPIOZ_13 13
-#define GPIOZ_14 14
-#define GPIOZ_15 15
-#define GPIOH_0 16
-#define GPIOH_1 17
-#define GPIOH_2 18
-#define GPIOH_3 19
-#define GPIOH_4 20
-#define GPIOH_5 21
-#define GPIOH_6 22
-#define GPIOH_7 23
-#define GPIOH_8 24
-#define GPIOH_9 25
-#define BOOT_0 26
-#define BOOT_1 27
-#define BOOT_2 28
-#define BOOT_3 29
-#define BOOT_4 30
-#define BOOT_5 31
-#define BOOT_6 32
-#define BOOT_7 33
-#define BOOT_8 34
-#define BOOT_9 35
-#define BOOT_10 36
-#define BOOT_11 37
-#define BOOT_12 38
-#define BOOT_13 39
-#define BOOT_14 40
-#define BOOT_15 41
-#define CARD_0 42
-#define CARD_1 43
-#define CARD_2 44
-#define CARD_3 45
-#define CARD_4 46
-#define CARD_5 47
-#define CARD_6 48
-#define GPIODV_0 49
-#define GPIODV_1 50
-#define GPIODV_2 51
-#define GPIODV_3 52
-#define GPIODV_4 53
-#define GPIODV_5 54
-#define GPIODV_6 55
-#define GPIODV_7 56
-#define GPIODV_8 57
-#define GPIODV_9 58
-#define GPIODV_10 59
-#define GPIODV_11 60
-#define GPIODV_12 61
-#define GPIODV_13 62
-#define GPIODV_14 63
-#define GPIODV_15 64
-#define GPIODV_16 65
-#define GPIODV_17 66
-#define GPIODV_18 67
-#define GPIODV_19 68
-#define GPIODV_20 69
-#define GPIODV_21 70
-#define GPIODV_22 71
-#define GPIODV_23 72
-#define GPIODV_24 73
-#define GPIODV_25 74
-#define GPIODV_26 75
-#define GPIODV_27 76
-#define GPIODV_28 77
-#define GPIODV_29 78
-#define GPIOX_0 79
-#define GPIOX_1 80
-#define GPIOX_2 81
-#define GPIOX_3 82
-#define GPIOX_4 83
-#define GPIOX_5 84
-#define GPIOX_6 85
-#define GPIOX_7 86
-#define GPIOX_8 87
-#define GPIOX_9 88
-#define GPIOX_10 89
-#define GPIOX_11 90
-#define GPIOX_12 91
-#define GPIOX_13 92
-#define GPIOX_14 93
-#define GPIOX_15 94
-#define GPIOX_16 95
-#define GPIOX_17 96
-#define GPIOX_18 97
-#define GPIOCLK_0 98
-#define GPIOCLK_1 99
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
-/*
- * Copyright (c) 2020 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_AXG_POWER_H
-#define _DT_BINDINGS_MESON_AXG_POWER_H
-
-#define PWRC_AXG_VPU_ID 0
-#define PWRC_AXG_ETHERNET_MEM_ID 1
-#define PWRC_AXG_AUDIO_ID 2
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_GXBB_POWER_H
-#define _DT_BINDINGS_MESON_GXBB_POWER_H
-
-#define PWRC_GXBB_VPU_ID 0
-#define PWRC_GXBB_ETHERNET_MEM_ID 1
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
-/*
- * Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * Copyright (c) 2017 Amlogic, inc.
- * Author: Yixun Lan <yixun.lan@amlogic.com>
- *
- */
-
-#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H
-#define _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H
-
-/* RESET0 */
-#define RESET_HIU 0
-#define RESET_PCIE_A 1
-#define RESET_PCIE_B 2
-#define RESET_DDR_TOP 3
-/* 4 */
-#define RESET_VIU 5
-#define RESET_PCIE_PHY 6
-#define RESET_PCIE_APB 7
-/* 8 */
-/* 9 */
-#define RESET_VENC 10
-#define RESET_ASSIST 11
-/* 12 */
-#define RESET_VCBUS 13
-/* 14 */
-/* 15 */
-#define RESET_GIC 16
-#define RESET_CAPB3_DECODE 17
-/* 18-21 */
-#define RESET_SYS_CPU_CAPB3 22
-#define RESET_CBUS_CAPB3 23
-#define RESET_AHB_CNTL 24
-#define RESET_AHB_DATA 25
-#define RESET_VCBUS_CLK81 26
-#define RESET_MMC 27
-/* 28-31 */
-/* RESET1 */
-/* 32 */
-/* 33 */
-#define RESET_USB_OTG 34
-#define RESET_DDR 35
-#define RESET_AO_RESET 36
-/* 37 */
-#define RESET_AHB_SRAM 38
-/* 39 */
-/* 40 */
-#define RESET_DMA 41
-#define RESET_ISA 42
-#define RESET_ETHERNET 43
-/* 44 */
-#define RESET_SD_EMMC_B 45
-#define RESET_SD_EMMC_C 46
-#define RESET_ROM_BOOT 47
-#define RESET_SYS_CPU_0 48
-#define RESET_SYS_CPU_1 49
-#define RESET_SYS_CPU_2 50
-#define RESET_SYS_CPU_3 51
-#define RESET_SYS_CPU_CORE_0 52
-#define RESET_SYS_CPU_CORE_1 53
-#define RESET_SYS_CPU_CORE_2 54
-#define RESET_SYS_CPU_CORE_3 55
-#define RESET_SYS_PLL_DIV 56
-#define RESET_SYS_CPU_AXI 57
-#define RESET_SYS_CPU_L2 58
-#define RESET_SYS_CPU_P 59
-#define RESET_SYS_CPU_MBIST 60
-/* 61-63 */
-/* RESET2 */
-/* 64 */
-/* 65 */
-#define RESET_AUDIO 66
-/* 67 */
-#define RESET_MIPI_HOST 68
-#define RESET_AUDIO_LOCKER 69
-#define RESET_GE2D 70
-/* 71-76 */
-#define RESET_AO_CPU_RESET 77
-/* 78-95 */
-/* RESET3 */
-#define RESET_RING_OSCILLATOR 96
-/* 97-127 */
-/* RESET4 */
-/* 128 */
-/* 129 */
-#define RESET_MIPI_PHY 130
-/* 131-140 */
-#define RESET_VENCL 141
-#define RESET_I2C_MASTER_2 142
-#define RESET_I2C_MASTER_1 143
-/* 144-159 */
-/* RESET5 */
-/* 160-191 */
-/* RESET6 */
-#define RESET_PERIPHS_GENERAL 192
-#define RESET_PERIPHS_SPICC 193
-/* 194 */
-/* 195 */
-#define RESET_PERIPHS_I2C_MASTER_0 196
-/* 197-200 */
-#define RESET_PERIPHS_UART_0 201
-#define RESET_PERIPHS_UART_1 202
-/* 203-204 */
-#define RESET_PERIPHS_SPI_0 205
-#define RESET_PERIPHS_I2C_MASTER_3 206
-/* 207-223 */
-/* RESET7 */
-#define RESET_USB_DDR_0 224
-#define RESET_USB_DDR_1 225
-#define RESET_USB_DDR_2 226
-#define RESET_USB_DDR_3 227
-/* 228 */
-#define RESET_DEVICE_MMC_ARB 229
-/* 230 */
-#define RESET_VID_LOCK 231
-#define RESET_A9_DMC_PIPEL 232
-#define RESET_DMC_VPU_PIPEL 233
-/* 234-255 */
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
-/*
- * Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
-#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
-
-/* RESET0 */
-#define RESET_HIU 0
-/* 1 */
-#define RESET_DOS_RESET 2
-#define RESET_DDR_TOP 3
-#define RESET_DCU_RESET 4
-#define RESET_VIU 5
-#define RESET_AIU 6
-#define RESET_VID_PLL_DIV 7
-/* 8 */
-#define RESET_PMUX 9
-#define RESET_VENC 10
-#define RESET_ASSIST 11
-#define RESET_AFIFO2 12
-#define RESET_VCBUS 13
-/* 14 */
-/* 15 */
-#define RESET_GIC 16
-#define RESET_CAPB3_DECODE 17
-#define RESET_NAND_CAPB3 18
-#define RESET_HDMITX_CAPB3 19
-#define RESET_MALI_CAPB3 20
-#define RESET_DOS_CAPB3 21
-#define RESET_SYS_CPU_CAPB3 22
-#define RESET_CBUS_CAPB3 23
-#define RESET_AHB_CNTL 24
-#define RESET_AHB_DATA 25
-#define RESET_VCBUS_CLK81 26
-#define RESET_MMC 27
-#define RESET_MIPI_0 28
-#define RESET_MIPI_1 29
-#define RESET_MIPI_2 30
-#define RESET_MIPI_3 31
-/* RESET1 */
-#define RESET_CPPM 32
-#define RESET_DEMUX 33
-#define RESET_USB_OTG 34
-#define RESET_DDR 35
-#define RESET_AO_RESET 36
-#define RESET_BT656 37
-#define RESET_AHB_SRAM 38
-/* 39 */
-#define RESET_PARSER 40
-#define RESET_BLKMV 41
-#define RESET_ISA 42
-#define RESET_ETHERNET 43
-#define RESET_SD_EMMC_A 44
-#define RESET_SD_EMMC_B 45
-#define RESET_SD_EMMC_C 46
-#define RESET_ROM_BOOT 47
-#define RESET_SYS_CPU_0 48
-#define RESET_SYS_CPU_1 49
-#define RESET_SYS_CPU_2 50
-#define RESET_SYS_CPU_3 51
-#define RESET_SYS_CPU_CORE_0 52
-#define RESET_SYS_CPU_CORE_1 53
-#define RESET_SYS_CPU_CORE_2 54
-#define RESET_SYS_CPU_CORE_3 55
-#define RESET_SYS_PLL_DIV 56
-#define RESET_SYS_CPU_AXI 57
-#define RESET_SYS_CPU_L2 58
-#define RESET_SYS_CPU_P 59
-#define RESET_SYS_CPU_MBIST 60
-#define RESET_ACODEC 61
-/* 62 */
-/* 63 */
-/* RESET2 */
-#define RESET_VD_RMEM 64
-#define RESET_AUDIN 65
-#define RESET_HDMI_TX 66
-/* 67 */
-/* 68 */
-/* 69 */
-#define RESET_GE2D 70
-#define RESET_PARSER_REG 71
-#define RESET_PARSER_FETCH 72
-#define RESET_PARSER_CTL 73
-#define RESET_PARSER_TOP 74
-/* 75 */
-/* 76 */
-#define RESET_AO_CPU_RESET 77
-#define RESET_MALI 78
-#define RESET_HDMI_SYSTEM_RESET 79
-/* 80-95 */
-/* RESET3 */
-#define RESET_RING_OSCILLATOR 96
-#define RESET_SYS_CPU 97
-#define RESET_EFUSE 98
-#define RESET_SYS_CPU_BVCI 99
-#define RESET_AIFIFO 100
-#define RESET_TVFE 101
-#define RESET_AHB_BRIDGE_CNTL 102
-/* 103 */
-#define RESET_AUDIO_DAC 104
-#define RESET_DEMUX_TOP 105
-#define RESET_DEMUX_DES 106
-#define RESET_DEMUX_S2P_0 107
-#define RESET_DEMUX_S2P_1 108
-#define RESET_DEMUX_RESET_0 109
-#define RESET_DEMUX_RESET_1 110
-#define RESET_DEMUX_RESET_2 111
-/* 112-127 */
-/* RESET4 */
-/* 128 */
-/* 129 */
-/* 130 */
-/* 131 */
-#define RESET_DVIN_RESET 132
-#define RESET_RDMA 133
-#define RESET_VENCI 134
-#define RESET_VENCP 135
-/* 136 */
-#define RESET_VDAC 137
-#define RESET_RTC 138
-/* 139 */
-#define RESET_VDI6 140
-#define RESET_VENCL 141
-#define RESET_I2C_MASTER_2 142
-#define RESET_I2C_MASTER_1 143
-/* 144-159 */
-/* RESET5 */
-/* 160-191 */
-/* RESET6 */
-#define RESET_PERIPHS_GENERAL 192
-#define RESET_PERIPHS_SPICC 193
-#define RESET_PERIPHS_SMART_CARD 194
-#define RESET_PERIPHS_SAR_ADC 195
-#define RESET_PERIPHS_I2C_MASTER_0 196
-#define RESET_SANA 197
-/* 198 */
-#define RESET_PERIPHS_STREAM_INTERFACE 199
-#define RESET_PERIPHS_SDIO 200
-#define RESET_PERIPHS_UART_0 201
-#define RESET_PERIPHS_UART_1_2 202
-#define RESET_PERIPHS_ASYNC_0 203
-#define RESET_PERIPHS_ASYNC_1 204
-#define RESET_PERIPHS_SPI_0 205
-#define RESET_PERIPHS_SDHC 206
-#define RESET_UART_SLIP 207
-/* 208-223 */
-/* RESET7 */
-#define RESET_USB_DDR_0 224
-#define RESET_USB_DDR_1 225
-#define RESET_USB_DDR_2 226
-#define RESET_USB_DDR_3 227
-/* 228 */
-#define RESET_DEVICE_MMC_ARB 229
-/* 230 */
-#define RESET_VID_LOCK 231
-#define RESET_A9_DMC_PIPEL 232
-/* 233-255 */
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_MESON_AIU_H
-#define __DT_MESON_AIU_H
-
-#define AIU_CPU 0
-#define AIU_HDMI 1
-#define AIU_ACODEC 2
-
-#define CPU_I2S_FIFO 0
-#define CPU_SPDIF_FIFO 1
-#define CPU_I2S_ENCODER 2
-#define CPU_SPDIF_ENCODER 3
-
-#define CTRL_I2S 0
-#define CTRL_PCM 1
-#define CTRL_OUT 2
-
-#endif /* __DT_MESON_AIU_H */
projects / u-boot.git / commitdiff