]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
TI OMAP3 Use arm init sequence to initialize i2c
authorTom Rix <Tom.Rix@windriver.com>
Tue, 29 Sep 2009 14:19:49 +0000 (10:19 -0400)
committerTom Rix <Tom.Rix@windriver.com>
Tue, 13 Oct 2009 11:17:37 +0000 (06:17 -0500)
This changes fixes an early i2c error.

It appears that I2C is working because once a read or write
error is detected, the omap24xx_i2c driver calls i2c_init
inside its error handling check.

While it is ok to attempt error handling this way, the boards
must not depend on this side effect to initialize it's i2c.

Instead of explicitly calling i2c_init for every board, use
the generic arm initialization in lib_arm/board.c. By defining
the config variable CONFIG_HARD_I2C, the omap3 i2c initialization
is included in the init_sequence table.

Run tested on Beagle.
Compile tested on the omap3's

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
include/configs/devkit8000.h
include/configs/omap3_beagle.h
include/configs/omap3_evm.h
include/configs/omap3_overo.h
include/configs/omap3_pandora.h
include/configs/omap3_zoom1.h
include/configs/omap3_zoom2.h

index cd40da632091166535f1c1899cd1828068969246..a8ac786c64cd6b8ba0cb54b5e41bf965ba51124c 100644 (file)
@@ -98,6 +98,7 @@
 #define CONFIG_DOS_PARTITION           1
 
 /* I2C */
+#define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
index 61629f8c4a265895a256bb45308530fafa952cb5..55eeb947fed687a1cc13f111fbb0729745a6acd1 100644 (file)
 #undef CONFIG_CMD_NFS          /* NFS support                  */
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
index 9f0f34bd8550a1240a95a8c01f4c705509b737f9..72e9626963400061059aa7205c9526823ddb02c7 100644 (file)
 #undef CONFIG_CMD_IMLS         /* List all found images        */
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
index 07a031bc8707d6384616e75e39bb87b5fc7da37f..154554d49a7cfc719ea515247bd70237af7dd149 100644 (file)
 #undef CONFIG_CMD_NFS          /* NFS support                  */
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
index 1cfd7e9694805076c83f06228295244abb46b00f..064c0bc69006348b3c6d74a71c82d5da27a05244 100644 (file)
 #undef CONFIG_CMD_NFS          /* NFS support                  */
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
index 61a41e7255035505086e68ba2303c61807431840..b55b8f02222d5e7268f1b9aaf577b6ac5d2aacc8 100644 (file)
 #undef CONFIG_CMD_NFS          /* NFS support                  */
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
index 03f92f58e75a6b1ad7389b1646835e6973b23278..75ab98098cb515f0d0915b32762cf22e5ac5631c 100644 (file)
 #undef CONFIG_CMD_NFS                  /* NFS support                  */
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0