rockchip: rk3399-eaidk-610: Sync DT from v6.8 and update defconfig

Sync rk3399-eaidk-610 device tree from Linux kernel v6.8.

Add DM_RESET=y to support reset signals.

Change to SPL_MAX_SIZE=0x40000, SPL can be up to 256 KiB.

Add ROCKCHIP_IODOMAIN=y to configure io-domain voltage.

Add MMC_SDHCI_SDMA=y to use DMA transfer for eMMC.

Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY.

Add PHY_ROCKCHIP_INNO_USB2=y and PHY_ROCKCHIP_TYPEC=y to support USB PHY.

Remove REGULATOR_PWM=y, board does not use pwm-regulator compatible.

Remove SPL_TINY_MEMSET=y to use full memset in SPL.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/dts/rk3399-eaidk-610.dts b/arch/arm/dts/rk3399-eaidk-610.dts
index d1f343345f67499a737d83b3d791b47efce32deb..173da81fc23117f959b859e5587d44dcea7c1143 100644 (file)
--- a/arch/arm/dts/rk3399-eaidk-610.dts
+++ b/arch/arm/dts/rk3399-eaidk-610.dts
@@ -15,6 +15,7 @@
        compatible = "openailab,eaidk-610", "rockchip,rk3399";
 
        aliases {
+               ethernet0 = &gmac;
                mmc0 = &sdio0;
                mmc1 = &sdmmc;
                mmc2 = &sdhci;
@@ -773,7 +774,7 @@
                compatible = "brcm,bcm4329-fmac";
                reg = <1>;
                interrupt-parent = <&gpio0>;
-               interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+               interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-names = "host-wake";
                pinctrl-names = "default";
                pinctrl-0 = <&wifi_host_wake_l>;

diff --git a/configs/eaidk-610-rk3399_defconfig b/configs/eaidk-610-rk3399_defconfig
index eba6f90c605bd73d9bd210594eed1d69af8e5aea..d9cde9ecced578ba0b2065e60e8f9154869dbdba 100644 (file)
--- a/configs/eaidk-610-rk3399_defconfig
+++ b/configs/eaidk-610-rk3399_defconfig
@@ -5,6 +5,7 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-eaidk-610"
+CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
@@ -13,7 +14,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-eaidk-610.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
@@ -30,14 +31,19 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PMIC_RK8XX=y
-CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_BAUDRATE=1500000
@@ -50,5 +56,4 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
-CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y