spi: rk: Limit transfers to (64K - 1) bytes

spi: rk: Limit transfers to (64K - 1) bytes

The Rockchip SPI controller's length register only supports 16-bits,
yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
1"). Trying to transfer more than that (e.g., with a large SPI flash
read) will cause the driver to hang.

Now, it seems that while theoretically we should be able to program
CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to
cause the core to choke, so stick with a maximum of 64K - 1 bytes --
i.e., 0xffff.

Note, that the size is further divided into 'minus 1' while writing
into CTRLR1.

This change fixed two different read issues,

1. sf read failure when with > 0x10000

2. Boot from SPI flash failed during spi_flash_read call in
   common/spl/spl_spi.c

Observed and Tested in
- Rockpro64 with Gigadevice flash
- ROC-RK3399-PC with Winbond flash

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>