arm:dts:k3-am64-sk: EMIF tool update to 0.8.0 with 1333MTs for lpddr4

arm:dts:k3-am64-sk: EMIF tool update to 0.8.0 with 1333MTs for lpddr4

EMIF tool for AM64 SK is now updated to 0.8.0 that includes
* disabled Write DQ training
* improve CA ODT to 60 ohms

The lpddr4 enabled with periodic WDQ training is causing periodic 26us
stall. This makes the SoC stall without doing anything which leads to
R5 interrupt latency in TCM memory. Due to this periodic training there
are some outstanding CPU transactions waiting for the lpddr4 to complete.

Hence, disable the periodic write DQ training during the
non-initialization stage of lpddr4 which results in an approximate 1us
stall. Also, update the lpddr4 config to improve CA ODT by 60 ohms

The rationales are as follows:
- PI_WDQLVL_EN: 2 Bits register field to support write DQ leveling,
  disable bit 1 that supports Write DQ during non-initialization to
  avoid ~26us stall during code execution.

- MR11_DATA_F1/F2_x register fields value changed to 0x66 that changes
  the CA ODT from 48ohm to 60ohm to improve the eye margin on CA bus by
  increasing the signal swing.

Signed-off-by: James Doublesin <doublesin@ti.com>
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>