From: Ovidiu Panait <ovidiu.panait@windriver.com>
Date: Tue, 30 Nov 2021 16:33:55 +0000 (+0200)
Subject: microblaze: add Kconfig symbol for the vector base address
X-Git-Tag: v2025.01-rc5-pxa1908~1573^2~20
X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=b6aef109799614f1efa921bdb8a73e461d9bcbdd;p=u-boot.git

microblaze: add Kconfig symbol for the vector base address

MicroBlaze vector base address is configurable (hdl C_BASE_VECTORS
configuration parameter). Current code assumes that the reset vector
location is always 0x0.

Add the XILINX_MICROBLAZE0_VECTOR_BASE_ADDR Kconfig option so the user
can adjust the reset vector address.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/20211130163358.2531677-8-ovidiu.panait@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/board/xilinx/microblaze-generic/Kconfig b/board/xilinx/microblaze-generic/Kconfig
index 3e3eca0e80..e31257d335 100644
--- a/board/xilinx/microblaze-generic/Kconfig
+++ b/board/xilinx/microblaze-generic/Kconfig
@@ -47,4 +47,11 @@ config XILINX_MICROBLAZE0_USR_EXCEP
 	  the exception vector table. The user exception vector is located at
 	  C_BASE_VECTORS + 0x8 address.
 
+config XILINX_MICROBLAZE0_VECTOR_BASE_ADDR
+	hex "Location of MicroBlaze vectors"
+	default 0x0
+	help
+	  Memory address location of the exception vector table. It is
+	  configurable via the C_BASE_VECTORS hdl parameter.
+
 endif