From: Jonas Karlman Date: Sat, 2 Mar 2024 19:16:12 +0000 (+0000) Subject: rockchip: Use common bss and stack addresses on RK3308 X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=41098d2e3ec168eae94a57c3c17f76ca16033a47;p=u-boot.git rockchip: Use common bss and stack addresses on RK3308 Currently the following memory layout is typically used on RK3308: [ 0, 256K) - SPL binary [ 256K, 2M) - TF-A / reserved [ -X, 4M) - SPL pre-reloc stack (SPL_STACK) [ -8K, 4M) - pre-reloc malloc heap (SPL_SYS_MALLOC_F_LEN) [ 4M, +8K) - SPL bss (SPL_BSS_START_ADDR, SPL_BSS_MAX_SIZE) [ 6M, +X) - U-Boot proper binary (TEXT_BASE) [ -X, 8M) - U-Boot proper pre-reloc stack (CUSTOM_SYS_INIT_SP_ADDR) [ -8K, 8M) - pre-reloc malloc heap (SYS_MALLOC_F_LEN) [ -X, 12M) - SPL reloc stack (SPL_STACK_R_ADDR) [ 11M, 12M) - reloc malloc heap (SPL_STACK_R_MALLOC_SIMPLE_LEN) SPL can safely load U-Boot proper + FDT to [6M, 8M-8K) with this layout. Migrate to use common bss, stack and malloc heap size and addresses to remove this size limitation and extend the malloc heap size being used. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/Kconfig b/Kconfig index 5710934000..75f9563ce6 100644 --- a/Kconfig +++ b/Kconfig @@ -265,7 +265,7 @@ config SYS_MALLOC_F_LEN hex "Size of malloc() pool before relocation" depends on SYS_MALLOC_F default 0x400 if M68K || PPC || ROCKCHIP_PX30 || ROCKCHIP_RK3036 || \ - ROCKCHIP_RK3308 || ROCKCHIP_RV1108 + ROCKCHIP_RV1108 default 0x600 if ARCH_ZYNQMP_R5 || ARCH_ZYNQMP default 0x800 if ARCH_ZYNQ || ROCKCHIP_RK3128 || ROCKCHIP_RK3188 || \ ROCKCHIP_RK322X || X86 diff --git a/arch/arm/mach-rockchip/rk3308/Kconfig b/arch/arm/mach-rockchip/rk3308/Kconfig index 194353e4cd..749e9995d9 100644 --- a/arch/arm/mach-rockchip/rk3308/Kconfig +++ b/arch/arm/mach-rockchip/rk3308/Kconfig @@ -17,8 +17,11 @@ config ROCKCHIP_STIMER_BASE config SYS_SOC default "rk3308" -config SYS_MALLOC_F_LEN - default 0x400 +config ROCKCHIP_COMMON_STACK_ADDR + default y + +config TEXT_BASE + default 0x00600000 config SPL_SERIAL default y diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig index 2729060d6e..d57b2f6b8e 100644 --- a/configs/evb-rk3308_defconfig +++ b/configs/evb-rk3308_defconfig @@ -2,19 +2,11 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00600000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_EVB_RK3308=y -CONFIG_SPL_STACK_R_ADDR=0xc00000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFF0C0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -28,11 +20,6 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x400000 -CONFIG_SPL_BSS_MAX_SIZE=0x2000 -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set diff --git a/configs/roc-cc-rk3308_defconfig b/configs/roc-cc-rk3308_defconfig index 7502da5b1e..5e8f51ec01 100644 --- a/configs/roc-cc-rk3308_defconfig +++ b/configs/roc-cc-rk3308_defconfig @@ -2,19 +2,11 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00600000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_DEFAULT_DEVICE_TREE="rk3308-roc-cc" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_ROC_RK3308_CC=y -CONFIG_SPL_STACK_R_ADDR=0xc00000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFF0C0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -28,11 +20,6 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x400000 -CONFIG_SPL_BSS_MAX_SIZE=0x2000 -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set diff --git a/configs/rock-pi-s-rk3308_defconfig b/configs/rock-pi-s-rk3308_defconfig index 9908a4b4f4..1e9cd2c0fc 100644 --- a/configs/rock-pi-s-rk3308_defconfig +++ b/configs/rock-pi-s-rk3308_defconfig @@ -2,20 +2,12 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00600000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_DEFAULT_DEVICE_TREE="rk3308-rock-pi-s" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_EVB_RK3308=y -CONFIG_SPL_STACK_R_ADDR=0xc00000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFF0A0000 CONFIG_DEBUG_UART_CLOCK=24000000 # CONFIG_DEBUG_UART_BOARD_INIT is not set @@ -29,11 +21,6 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x400000 -CONFIG_SPL_BSS_MAX_SIZE=0x2000 -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set