From: Marek Vasut Date: Sat, 31 Aug 2024 20:33:37 +0000 (+0200) Subject: ARM: dts: renesas: Minimize R8A779G0 V4H RPC SPI DT node X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=3faeb78378ea32922fbd00e9ddf675ce0aa526a3;p=u-boot.git ARM: dts: renesas: Minimize R8A779G0 V4H RPC SPI DT node The RPC SPI DT node is now part of mainline Linux DT, remove the duplicate content from U-Boot DT extras. The SPI flash DT node name has been changed from "spi-flash@0" to "flash@0", reflect this change in this patch. Retain "bank-width" and "num-cs" DT properties which are used by U-Boot. Retain "spi-rx-bus-width" and "spi-tx-bus-width" DT properties to indicate the bus should always be operated in 1-1-1 mode as the U-Boot RPC SPI driver does not support higher bus width modes yet. Signed-off-by: Marek Vasut --- diff --git a/arch/arm/dts/r8a779g0-u-boot.dtsi b/arch/arm/dts/r8a779g0-u-boot.dtsi index cc8becac99..f60eba531e 100644 --- a/arch/arm/dts/r8a779g0-u-boot.dtsi +++ b/arch/arm/dts/r8a779g0-u-boot.dtsi @@ -8,7 +8,6 @@ #include "r8a779x-u-boot.dtsi" &rpc { - reg = <0 0xee200000 0 0x200>, <0 0x08000000 0 0x04000000>; bank-width = <2>; num-cs = <1>; }; diff --git a/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi b/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi index a102639010..c3704d789e 100644 --- a/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi +++ b/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi @@ -13,29 +13,9 @@ }; }; -&pfc { - qspi0_pins: qspi0 { - groups = "qspi0_ctrl", "qspi0_data4"; - function = "qspi0"; - }; -}; - &rpc { - pinctrl-0 = <&qspi0_pins>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <40000000>; - status = "disabled"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "s25fs512s", "jedec,spi-nor"; - reg = <0>; + flash@0 { spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; - spi-max-frequency = <40000000>; }; };