From 9a1b96f1d8b69dc004458603aea2e807d1a6cf19 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 14 Oct 2020 17:12:10 +0800 Subject: [PATCH] doc: board: Convert i.MX6ULL EVK README to reST Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Peng Fan --- doc/board/freescale/index.rst | 1 + .../board/freescale/mx6ullevk.rst | 29 +++++++++++++------ 2 files changed, 21 insertions(+), 9 deletions(-) rename board/freescale/mx6ullevk/README => doc/board/freescale/mx6ullevk.rst (66%) diff --git a/doc/board/freescale/index.rst b/doc/board/freescale/index.rst index 046a839a52..313cf409a6 100644 --- a/doc/board/freescale/index.rst +++ b/doc/board/freescale/index.rst @@ -17,3 +17,4 @@ Freescale mx6sabreauto mx6sabresd mx6ul_14x14_evk + mx6ullevk diff --git a/board/freescale/mx6ullevk/README b/doc/board/freescale/mx6ullevk.rst similarity index 66% rename from board/freescale/mx6ullevk/README rename to doc/board/freescale/mx6ullevk.rst index 47a35f61a2..a26248a1e3 100644 --- a/board/freescale/mx6ullevk/README +++ b/doc/board/freescale/mx6ullevk.rst @@ -1,26 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +mx6ullevk +========= + How to use U-Boot on Freescale MX6ULL 14x14 EVK ----------------------------------------------- +----------------------------------------------- - First make sure you have installed the dtc package (device tree compiler): -$ sudo apt-get install device-tree-compiler +.. code-block:: bash + + $ sudo apt-get install device-tree-compiler - Build U-Boot for MX6ULL 14x14 EVK: -$ make mrproper -$ make mx6ull_14x14_evk_defconfig -$ make +.. code-block:: bash + + $ make mrproper + $ make mx6ull_14x14_evk_defconfig + $ make This generates the u-boot-dtb.imx image in the current directory. - Flash the u-boot-dtb.imx image into the micro SD card: -$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync +.. code-block:: bash + + $ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync -- Jumper settings: +- Jumper settings:: -SW601: 0 0 1 0 -Sw602: 1 0 + SW601: 0 0 1 0 + Sw602: 1 0 Where 0 means bottom position and 1 means top position (from the switch label numbers reference). -- 2.39.5