From 7dd42be9f9d9c941844c3441b5b61a18e576c672 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 15 May 2021 14:44:19 +0200 Subject: [PATCH] ARM: integrator: Drop PCI support We didn't convert the Integrator to use DM for PCI in time, and we don't use it either so let's just drop PCI support from the Integrator. Signed-off-by: Linus Walleij Reviewed-by: Tom Rini --- board/armltd/integrator/Makefile | 1 - board/armltd/integrator/integrator.c | 1 - board/armltd/integrator/pci.c | 462 ------------------------ board/armltd/integrator/pci_v3.h | 187 ---------- configs/integratorap_cm720t_defconfig | 4 - configs/integratorap_cm920t_defconfig | 4 - configs/integratorap_cm926ejs_defconfig | 4 - configs/integratorap_cm946es_defconfig | 4 - 8 files changed, 667 deletions(-) delete mode 100644 board/armltd/integrator/pci.c delete mode 100644 board/armltd/integrator/pci_v3.h diff --git a/board/armltd/integrator/Makefile b/board/armltd/integrator/Makefile index 8c906e3f07..107e59bf0f 100644 --- a/board/armltd/integrator/Makefile +++ b/board/armltd/integrator/Makefile @@ -10,5 +10,4 @@ obj-y := lowlevel_init.o obj-y += integrator.o -obj-$(CONFIG_PCI) += pci.o obj-y += timer.o diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c index 3e864e8e7a..388795809d 100644 --- a/board/armltd/integrator/integrator.c +++ b/board/armltd/integrator/integrator.c @@ -181,7 +181,6 @@ int board_eth_init(struct bd_info *bis) #ifdef CONFIG_SMC91111 rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); #endif - rc += pci_eth_init(bis); return rc; } #endif diff --git a/board/armltd/integrator/pci.c b/board/armltd/integrator/pci.c deleted file mode 100644 index 28efc33f1f..0000000000 --- a/board/armltd/integrator/pci.c +++ /dev/null @@ -1,462 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, - * - * (C) Copyright 2003 - * Texas Instruments, - * Kshitij Gupta - * - * (C) Copyright 2004 - * ARM Ltd. - * Philippe Robin, - * - * (C) Copyright 2011 - * Linaro - * Linus Walleij - */ -#include -#include -#include -#include -#include -#include -#include -#include "integrator-sc.h" -#include "pci_v3.h" - -#define INTEGRATOR_BOOT_ROM_BASE 0x20000000 -#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000 - -/* - * These are in the physical addresses on the CPU side, i.e. - * where we read and write stuff - you don't want to try to - * move these around - */ -#define PHYS_PCI_MEM_BASE 0x40000000 -#define PHYS_PCI_IO_BASE 0x60000000 /* PCI I/O space base */ -#define PHYS_PCI_CONFIG_BASE 0x61000000 -#define PHYS_PCI_V3_BASE 0x62000000 /* V360EPC registers */ -#define SZ_256M 0x10000000 - -/* - * These are in the PCI BUS address space - * Set to 0x00000000 in the Linux kernel, 0x40000000 in Boot monitor - * we follow the example of the kernel, because that is the address - * range that devices actually use - what would they be doing at - * 0x40000000? - */ -#define PCI_BUS_NONMEM_START 0x00000000 -#define PCI_BUS_NONMEM_SIZE SZ_256M - -#define PCI_BUS_PREMEM_START (PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE) -#define PCI_BUS_PREMEM_SIZE SZ_256M - -#if PCI_BUS_NONMEM_START & 0x000fffff -#error PCI_BUS_NONMEM_START must be megabyte aligned -#endif -#if PCI_BUS_PREMEM_START & 0x000fffff -#error PCI_BUS_PREMEM_START must be megabyte aligned -#endif - -/* - * Initialize PCI Devices, report devices found. - */ - -#ifndef CONFIG_PCI_PNP -#define PCI_ENET0_IOADDR 0x60000000 /* First card in PCI I/O space */ -#define PCI_ENET0_MEMADDR 0x40000000 /* First card in PCI memory space */ -static struct pci_config_table pci_integrator_config_table[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID, - pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, - { } -}; -#endif /* CONFIG_PCI_PNP */ - -/* V3 access routines */ -#define v3_writeb(o, v) __raw_writeb(v, PHYS_PCI_V3_BASE + (unsigned int)(o)) -#define v3_readb(o) (__raw_readb(PHYS_PCI_V3_BASE + (unsigned int)(o))) - -#define v3_writew(o, v) __raw_writew(v, PHYS_PCI_V3_BASE + (unsigned int)(o)) -#define v3_readw(o) (__raw_readw(PHYS_PCI_V3_BASE + (unsigned int)(o))) - -#define v3_writel(o, v) __raw_writel(v, PHYS_PCI_V3_BASE + (unsigned int)(o)) -#define v3_readl(o) (__raw_readl(PHYS_PCI_V3_BASE + (unsigned int)(o))) - -static unsigned long v3_open_config_window(pci_dev_t bdf, int offset) -{ - unsigned int address, mapaddress; - unsigned int busnr = PCI_BUS(bdf); - unsigned int devfn = PCI_FUNC(bdf); - - /* - * Trap out illegal values - */ - if (offset > 255) - BUG(); - if (busnr > 255) - BUG(); - if (devfn > 255) - BUG(); - - if (busnr == 0) { - /* - * Linux calls the thing U-Boot calls "DEV" "SLOT" - * instead, but it's the same 5 bits - */ - int slot = PCI_DEV(bdf); - - /* - * local bus segment so need a type 0 config cycle - * - * build the PCI configuration "address" with one-hot in - * A31-A11 - * - * mapaddress: - * 3:1 = config cycle (101) - * 0 = PCI A1 & A0 are 0 (0) - */ - address = PCI_FUNC(bdf) << 8; - mapaddress = V3_LB_MAP_TYPE_CONFIG; - - if (slot > 12) - /* - * high order bits are handled by the MAP register - */ - mapaddress |= 1 << (slot - 5); - else - /* - * low order bits handled directly in the address - */ - address |= 1 << (slot + 11); - } else { - /* - * not the local bus segment so need a type 1 config cycle - * - * address: - * 23:16 = bus number - * 15:11 = slot number (7:3 of devfn) - * 10:8 = func number (2:0 of devfn) - * - * mapaddress: - * 3:1 = config cycle (101) - * 0 = PCI A1 & A0 from host bus (1) - */ - mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN; - address = (busnr << 16) | (devfn << 8); - } - - /* - * Set up base0 to see all 512Mbytes of memory space (not - * prefetchable), this frees up base1 for re-use by - * configuration memory - */ - v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | - V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE); - - /* - * Set up base1/map1 to point into configuration space. - */ - v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_CONFIG_BASE) | - V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP1, mapaddress); - - return PHYS_PCI_CONFIG_BASE + address + offset; -} - -static void v3_close_config_window(void) -{ - /* - * Reassign base1 for use by prefetchable PCI memory - */ - v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) | - V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH | - V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) | - V3_LB_MAP_TYPE_MEM_MULTIPLE); - - /* - * And shrink base0 back to a 256M window (NOTE: MAP0 already correct) - */ - v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | - V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE); -} - -static int pci_integrator_read_byte(struct pci_controller *hose, pci_dev_t bdf, - int offset, unsigned char *val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - *val = __raw_readb(addr); - v3_close_config_window(); - return 0; -} - -static int pci_integrator_read__word(struct pci_controller *hose, - pci_dev_t bdf, int offset, - unsigned short *val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - *val = __raw_readw(addr); - v3_close_config_window(); - return 0; -} - -static int pci_integrator_read_dword(struct pci_controller *hose, - pci_dev_t bdf, int offset, - unsigned int *val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - *val = __raw_readl(addr); - v3_close_config_window(); - return 0; -} - -static int pci_integrator_write_byte(struct pci_controller *hose, - pci_dev_t bdf, int offset, - unsigned char val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - __raw_writeb((u8)val, addr); - __raw_readb(addr); - v3_close_config_window(); - return 0; -} - -static int pci_integrator_write_word(struct pci_controller *hose, - pci_dev_t bdf, int offset, - unsigned short val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - __raw_writew((u8)val, addr); - __raw_readw(addr); - v3_close_config_window(); - return 0; -} - -static int pci_integrator_write_dword(struct pci_controller *hose, - pci_dev_t bdf, int offset, - unsigned int val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - __raw_writel((u8)val, addr); - __raw_readl(addr); - v3_close_config_window(); - return 0; -} - -struct pci_controller integrator_hose = { -#ifndef CONFIG_PCI_PNP - config_table: pci_integrator_config_table, -#endif -}; - -void pci_init_board(void) -{ - struct pci_controller *hose = &integrator_hose; - u16 val; - - /* setting this register will take the V3 out of reset */ - __raw_writel(SC_PCI_PCIEN, SC_PCI); - - /* Wait for 230 ms (from spec) before accessing any V3 registers */ - mdelay(230); - - /* Now write the Base I/O Address Word to PHYS_PCI_V3_BASE + 0x6E */ - v3_writew(V3_LB_IO_BASE, (PHYS_PCI_V3_BASE >> 16)); - - /* Wait for the mailbox to settle */ - do { - v3_writeb(V3_MAIL_DATA, 0xAA); - v3_writeb(V3_MAIL_DATA + 4, 0x55); - } while (v3_readb(V3_MAIL_DATA) != 0xAA || - v3_readb(V3_MAIL_DATA + 4) != 0x55); - - /* Make sure that V3 register access is not locked, if it is, unlock it */ - if (v3_readw(V3_SYSTEM) & V3_SYSTEM_M_LOCK) - v3_writew(V3_SYSTEM, 0xA05F); - - /* - * Ensure that the slave accesses from PCI are disabled while we - * setup memory windows - */ - val = v3_readw(V3_PCI_CMD); - val &= ~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN); - v3_writew(V3_PCI_CMD, val); - - /* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */ - val = v3_readw(V3_SYSTEM); - val &= ~V3_SYSTEM_M_RST_OUT; - v3_writew(V3_SYSTEM, val); - - /* Make all accesses from PCI space retry until we're ready for them */ - val = v3_readw(V3_PCI_CFG); - val |= V3_PCI_CFG_M_RETRY_EN; - v3_writew(V3_PCI_CFG, val); - - /* - * Set up any V3 PCI Configuration Registers that we absolutely have to. - * LB_CFG controls Local Bus protocol. - * Enable LocalBus byte strobes for READ accesses too. - * set bit 7 BE_IMODE and bit 6 BE_OMODE - */ - val = v3_readw(V3_LB_CFG); - val |= 0x0C0; - v3_writew(V3_LB_CFG, val); - - /* PCI_CMD controls overall PCI operation. Enable PCI bus master. */ - val = v3_readw(V3_PCI_CMD); - val |= V3_COMMAND_M_MASTER_EN; - v3_writew(V3_PCI_CMD, val); - - /* - * PCI_MAP0 controls where the PCI to CPU memory window is on - * Local Bus - */ - v3_writel(V3_PCI_MAP0, - (INTEGRATOR_BOOT_ROM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_512MB | - V3_PCI_MAP_M_REG_EN | - V3_PCI_MAP_M_ENABLE)); - - /* PCI_BASE0 is the PCI address of the start of the window */ - v3_writel(V3_PCI_BASE0, INTEGRATOR_BOOT_ROM_BASE); - - /* PCI_MAP1 is LOCAL address of the start of the window */ - v3_writel(V3_PCI_MAP1, - (INTEGRATOR_HDR0_SDRAM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_1GB | - V3_PCI_MAP_M_REG_EN | - V3_PCI_MAP_M_ENABLE)); - - /* PCI_BASE1 is the PCI address of the start of the window */ - v3_writel(V3_PCI_BASE1, INTEGRATOR_HDR0_SDRAM_BASE); - - /* - * Set up memory the windows from local bus memory into PCI - * configuration, I/O and Memory regions. - * PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. - */ - v3_writew(V3_LB_BASE2, - v3_addr_to_lb_map(PHYS_PCI_IO_BASE) | V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP2, 0); - - /* PCI Configuration, use LB_BASE1/LB_MAP1. */ - - /* - * PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 - * Map first 256Mbytes as non-prefetchable via BASE0/MAP0 - */ - v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | - V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP0, - v3_addr_to_lb_map(PCI_BUS_NONMEM_START) | V3_LB_MAP_TYPE_MEM); - - /* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */ - v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) | - V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH | - V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) | - V3_LB_MAP_TYPE_MEM_MULTIPLE); - - /* Dump PCI to local address space mappings */ - debug("LB_BASE0 = %08x\n", v3_readl(V3_LB_BASE0)); - debug("LB_MAP0 = %04x\n", v3_readw(V3_LB_MAP0)); - debug("LB_BASE1 = %08x\n", v3_readl(V3_LB_BASE1)); - debug("LB_MAP1 = %04x\n", v3_readw(V3_LB_MAP1)); - debug("LB_BASE2 = %04x\n", v3_readw(V3_LB_BASE2)); - debug("LB_MAP2 = %04x\n", v3_readw(V3_LB_MAP2)); - debug("LB_IO_BASE = %04x\n", v3_readw(V3_LB_IO_BASE)); - - /* - * Allow accesses to PCI Configuration space and set up A1, A0 for - * type 1 config cycles - */ - val = v3_readw(V3_PCI_CFG); - val &= ~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1); - val |= V3_PCI_CFG_M_AD_LOW0; - v3_writew(V3_PCI_CFG, val); - - /* now we can allow incoming PCI MEMORY accesses */ - val = v3_readw(V3_PCI_CMD); - val |= V3_COMMAND_M_MEM_EN; - v3_writew(V3_PCI_CMD, val); - - /* - * Set RST_OUT to take the PCI bus is out of reset, PCI devices can - * now initialise. - */ - val = v3_readw(V3_SYSTEM); - val |= V3_SYSTEM_M_RST_OUT; - v3_writew(V3_SYSTEM, val); - - /* Lock the V3 system register so that no one else can play with it */ - val = v3_readw(V3_SYSTEM); - val |= V3_SYSTEM_M_LOCK; - v3_writew(V3_SYSTEM, val); - - /* - * Configure and register the PCI hose - */ - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* System memory space, window 0 256 MB non-prefetchable */ - pci_set_region(hose->regions + 0, - PCI_BUS_NONMEM_START, PHYS_PCI_MEM_BASE, - SZ_256M, - PCI_REGION_MEM); - - /* System memory space, window 1 256 MB prefetchable */ - pci_set_region(hose->regions + 1, - PCI_BUS_PREMEM_START, PHYS_PCI_MEM_BASE + SZ_256M, - SZ_256M, - PCI_REGION_MEM | - PCI_REGION_PREFETCH); - - /* PCI I/O space */ - pci_set_region(hose->regions + 2, - 0x00000000, PHYS_PCI_IO_BASE, 0x01000000, - PCI_REGION_IO); - - /* PCI Memory - config space */ - pci_set_region(hose->regions + 3, - 0x00000000, PHYS_PCI_CONFIG_BASE, 0x01000000, - PCI_REGION_MEM); - /* PCI V3 regs */ - pci_set_region(hose->regions + 4, - 0x00000000, PHYS_PCI_V3_BASE, 0x01000000, - PCI_REGION_MEM); - - hose->region_count = 5; - - pci_set_ops(hose, - pci_integrator_read_byte, - pci_integrator_read__word, - pci_integrator_read_dword, - pci_integrator_write_byte, - pci_integrator_write_word, - pci_integrator_write_dword); - - pci_register_hose(hose); - - pciauto_config_init(hose); - pciauto_config_device(hose, 0); - - hose->last_busno = pci_hose_scan(hose); -} diff --git a/board/armltd/integrator/pci_v3.h b/board/armltd/integrator/pci_v3.h deleted file mode 100644 index 8d09e6966d..0000000000 --- a/board/armltd/integrator/pci_v3.h +++ /dev/null @@ -1,187 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * arch/arm/include/asm/hardware/pci_v3.h - * - * Internal header file PCI V3 chip - * - * Copyright (C) ARM Limited - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - */ -#ifndef ASM_ARM_HARDWARE_PCI_V3_H -#define ASM_ARM_HARDWARE_PCI_V3_H - -/* ------------------------------------------------------------------------------- - * V3 Local Bus to PCI Bridge definitions - * ------------------------------------------------------------------------------- - * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04 - * All V3 register names are prefaced by V3_ to avoid clashing with any other - * PCI definitions. Their names match the user's manual. - * - * I'm assuming that I20 is disabled. - * - */ -#define V3_PCI_VENDOR 0x00000000 -#define V3_PCI_DEVICE 0x00000002 -#define V3_PCI_CMD 0x00000004 -#define V3_PCI_STAT 0x00000006 -#define V3_PCI_CC_REV 0x00000008 -#define V3_PCI_HDR_CFG 0x0000000C -#define V3_PCI_IO_BASE 0x00000010 -#define V3_PCI_BASE0 0x00000014 -#define V3_PCI_BASE1 0x00000018 -#define V3_PCI_SUB_VENDOR 0x0000002C -#define V3_PCI_SUB_ID 0x0000002E -#define V3_PCI_ROM 0x00000030 -#define V3_PCI_BPARAM 0x0000003C -#define V3_PCI_MAP0 0x00000040 -#define V3_PCI_MAP1 0x00000044 -#define V3_PCI_INT_STAT 0x00000048 -#define V3_PCI_INT_CFG 0x0000004C -#define V3_LB_BASE0 0x00000054 -#define V3_LB_BASE1 0x00000058 -#define V3_LB_MAP0 0x0000005E -#define V3_LB_MAP1 0x00000062 -#define V3_LB_BASE2 0x00000064 -#define V3_LB_MAP2 0x00000066 -#define V3_LB_SIZE 0x00000068 -#define V3_LB_IO_BASE 0x0000006E -#define V3_FIFO_CFG 0x00000070 -#define V3_FIFO_PRIORITY 0x00000072 -#define V3_FIFO_STAT 0x00000074 -#define V3_LB_ISTAT 0x00000076 -#define V3_LB_IMASK 0x00000077 -#define V3_SYSTEM 0x00000078 -#define V3_LB_CFG 0x0000007A -#define V3_PCI_CFG 0x0000007C -#define V3_DMA_PCI_ADR0 0x00000080 -#define V3_DMA_PCI_ADR1 0x00000090 -#define V3_DMA_LOCAL_ADR0 0x00000084 -#define V3_DMA_LOCAL_ADR1 0x00000094 -#define V3_DMA_LENGTH0 0x00000088 -#define V3_DMA_LENGTH1 0x00000098 -#define V3_DMA_CSR0 0x0000008B -#define V3_DMA_CSR1 0x0000009B -#define V3_DMA_CTLB_ADR0 0x0000008C -#define V3_DMA_CTLB_ADR1 0x0000009C -#define V3_DMA_DELAY 0x000000E0 -#define V3_MAIL_DATA 0x000000C0 -#define V3_PCI_MAIL_IEWR 0x000000D0 -#define V3_PCI_MAIL_IERD 0x000000D2 -#define V3_LB_MAIL_IEWR 0x000000D4 -#define V3_LB_MAIL_IERD 0x000000D6 -#define V3_MAIL_WR_STAT 0x000000D8 -#define V3_MAIL_RD_STAT 0x000000DA -#define V3_QBA_MAP 0x000000DC - -/* PCI COMMAND REGISTER bits - */ -#define V3_COMMAND_M_FBB_EN (1 << 9) -#define V3_COMMAND_M_SERR_EN (1 << 8) -#define V3_COMMAND_M_PAR_EN (1 << 6) -#define V3_COMMAND_M_MASTER_EN (1 << 2) -#define V3_COMMAND_M_MEM_EN (1 << 1) -#define V3_COMMAND_M_IO_EN (1 << 0) - -/* SYSTEM REGISTER bits - */ -#define V3_SYSTEM_M_RST_OUT (1 << 15) -#define V3_SYSTEM_M_LOCK (1 << 14) - -/* PCI_CFG bits - */ -#define V3_PCI_CFG_M_I2O_EN (1 << 15) -#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14) -#define V3_PCI_CFG_M_IO_DIS (1 << 13) -#define V3_PCI_CFG_M_EN3V (1 << 12) -#define V3_PCI_CFG_M_RETRY_EN (1 << 10) -#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) -#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) - -/* PCI_BASE register bits (PCI -> Local Bus) - */ -#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000 -#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00 -#define V3_PCI_BASE_M_PREFETCH (1 << 3) -#define V3_PCI_BASE_M_TYPE (3 << 1) -#define V3_PCI_BASE_M_IO (1 << 0) - -/* PCI MAP register bits (PCI -> Local bus) - */ -#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 -#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) -#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) -#define V3_PCI_MAP_M_SWAP (3 << 8) -#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 -#define V3_PCI_MAP_M_REG_EN (1 << 1) -#define V3_PCI_MAP_M_ENABLE (1 << 0) - -#define V3_PCI_MAP_M_ADR_SIZE_1MB (0 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_2MB (1 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_4MB (2 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_8MB (3 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_16MB (4 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_32MB (5 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_64MB (6 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_128MB (7 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_256MB (8 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_512MB (9 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_1GB (10 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_2GB (11 << 4) - -/* - * LB_BASE0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_BASE_ADR_BASE 0xfff00000 -#define V3_LB_BASE_SWAP (3 << 8) -#define V3_LB_BASE_ADR_SIZE (15 << 4) -#define V3_LB_BASE_PREFETCH (1 << 3) -#define V3_LB_BASE_ENABLE (1 << 0) - -#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) -#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) -#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) -#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) -#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) -#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) -#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) -#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) -#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) -#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) -#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) -#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) - -#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) - -/* - * LB_MAP0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_MAP_MAP_ADR 0xfff0 -#define V3_LB_MAP_TYPE (7 << 1) -#define V3_LB_MAP_AD_LOW_EN (1 << 0) - -#define V3_LB_MAP_TYPE_IACK (0 << 1) -#define V3_LB_MAP_TYPE_IO (1 << 1) -#define V3_LB_MAP_TYPE_MEM (3 << 1) -#define V3_LB_MAP_TYPE_CONFIG (5 << 1) -#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) - -/* PCI MAP register bits (PCI -> Local bus) */ -#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) - -/* - * LB_BASE2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_BASE2_ADR_BASE 0xff00 -#define V3_LB_BASE2_SWAP (3 << 6) -#define V3_LB_BASE2_ENABLE (1 << 0) - -#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) - -/* - * LB_MAP2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_MAP2_MAP_ADR 0xff00 - -#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) - -#endif diff --git a/configs/integratorap_cm720t_defconfig b/configs/integratorap_cm720t_defconfig index 5d28135a82..378bf936d7 100644 --- a/configs/integratorap_cm720t_defconfig +++ b/configs/integratorap_cm720t_defconfig @@ -16,7 +16,6 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y -CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_MMC is not set @@ -24,8 +23,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y -CONFIG_EEPRO100=y -CONFIG_TULIP=y -CONFIG_PCI=y CONFIG_BAUDRATE=38400 CONFIG_OF_LIBFDT=y diff --git a/configs/integratorap_cm920t_defconfig b/configs/integratorap_cm920t_defconfig index 0e914e91eb..4ec2961a4e 100644 --- a/configs/integratorap_cm920t_defconfig +++ b/configs/integratorap_cm920t_defconfig @@ -16,7 +16,6 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y -CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_MMC is not set @@ -24,8 +23,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y -CONFIG_EEPRO100=y -CONFIG_TULIP=y -CONFIG_PCI=y CONFIG_BAUDRATE=38400 CONFIG_OF_LIBFDT=y diff --git a/configs/integratorap_cm926ejs_defconfig b/configs/integratorap_cm926ejs_defconfig index d28bc0f976..012d346500 100644 --- a/configs/integratorap_cm926ejs_defconfig +++ b/configs/integratorap_cm926ejs_defconfig @@ -16,7 +16,6 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y -CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_MMC is not set @@ -24,8 +23,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y -CONFIG_EEPRO100=y -CONFIG_TULIP=y -CONFIG_PCI=y CONFIG_BAUDRATE=38400 CONFIG_OF_LIBFDT=y diff --git a/configs/integratorap_cm946es_defconfig b/configs/integratorap_cm946es_defconfig index ae44f01ff5..1868c7024f 100644 --- a/configs/integratorap_cm946es_defconfig +++ b/configs/integratorap_cm946es_defconfig @@ -16,7 +16,6 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y -CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_MMC is not set @@ -24,8 +23,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y -CONFIG_EEPRO100=y -CONFIG_TULIP=y -CONFIG_PCI=y CONFIG_BAUDRATE=38400 CONFIG_OF_LIBFDT=y -- 2.39.5