From: Tom Rini Date: Tue, 9 Feb 2021 13:03:02 +0000 (-0500) Subject: arm: Remove mx35pdk board X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20%24style.RelPermalink%20%7D%7D?a=commitdiff_plain;h=a1361f458156851de05d40e4dba20ae730646058;p=u-boot.git arm: Remove mx35pdk board This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Stefano Babic Signed-off-by: Tom Rini Acked-by: Stefano Babic --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 95557d6ed6..8d6ff61f2b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -621,11 +621,6 @@ config TARGET_FLEA3 bool "Support flea3" select CPU_ARM1136 -config TARGET_MX35PDK - bool "Support mx35pdk" - select BOARD_LATE_INIT - select CPU_ARM1136 - config ARCH_BCM283X bool "Broadcom BCM283X family" select DM @@ -2015,7 +2010,6 @@ source "board/freescale/ls1012aqds/Kconfig" source "board/freescale/ls1012ardb/Kconfig" source "board/freescale/ls1012afrdm/Kconfig" source "board/freescale/lx2160a/Kconfig" -source "board/freescale/mx35pdk/Kconfig" source "board/freescale/s32v234evb/Kconfig" source "board/grinn/chiliboard/Kconfig" source "board/hisilicon/hikey/Kconfig" diff --git a/board/freescale/mx35pdk/Kconfig b/board/freescale/mx35pdk/Kconfig deleted file mode 100644 index 021d19e551..0000000000 --- a/board/freescale/mx35pdk/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_MX35PDK - -config SYS_BOARD - default "mx35pdk" - -config SYS_VENDOR - default "freescale" - -config SYS_SOC - default "mx35" - -config SYS_CONFIG_NAME - default "mx35pdk" - -endif diff --git a/board/freescale/mx35pdk/MAINTAINERS b/board/freescale/mx35pdk/MAINTAINERS deleted file mode 100644 index 540e943691..0000000000 --- a/board/freescale/mx35pdk/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MX35PDK BOARD -M: Stefano Babic -S: Maintained -F: board/freescale/mx35pdk/ -F: include/configs/mx35pdk.h -F: configs/mx35pdk_defconfig diff --git a/board/freescale/mx35pdk/Makefile b/board/freescale/mx35pdk/Makefile deleted file mode 100644 index 6a60fad0cc..0000000000 --- a/board/freescale/mx35pdk/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2007, Guennadi Liakhovetski -# -# (C) Copyright 2008-2009 Freescale Semiconductor, Inc. - -obj-y := mx35pdk.o -obj-y += lowlevel_init.o diff --git a/board/freescale/mx35pdk/README b/board/freescale/mx35pdk/README deleted file mode 100644 index 6f6841f099..0000000000 --- a/board/freescale/mx35pdk/README +++ /dev/null @@ -1,114 +0,0 @@ -Overview --------------- - -mx35pdk (known als as mx35_3stack) is a development board by Freescale. -It consists of three pluggable board: - - CPU module, with CPU, RAM, flash - - Personality board, with most interfaces (USB, Network,..) - - Debug board with JTAG header. - -The board is usually delivered with redboot. This howto explains how to boot -a linux kernel and how to replace the original bootloader with U-Boot. - -The board is delivered with Redboot on the NAND flash. It is possible to -switch the boot device with the switches SW1-SW2 on the Personality board, -and with SW5-SW10 on the Debug board. - -Delivered Redboot script to start the kernel ---------------------------------------------------- - -In redboot the following script is stored: - -fis load kernel -exec -c "noinitrd console=ttymxc0,115200 root=/dev/mtdblock8 rw rootfstype=jffs2 ip=dhcp fec_mac=00:04:9F:00:E7:76" - -Kernel is taken from flash. The image is in zImage format. - -Booting from NET, rootfs on NFS: ------------------------------------ - -To change the script in redboot: - -load -r -b 0x100000 -exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nfsroot=192.168.1.1:/opt/eldk-4.2-arm/armVFP rw ip=dhcp" - -If the ip address is not set, you can set it with : - -ip_address -l -h - -Linux partitions: ---------------------------- - -As default, the board is shipped with these partition tables for NAND -and for NOR: - -Creating 5 MTD partitions on "NAND 2GiB 3,3V 8-bit": -0x00000000-0x00100000 : "nand.bootloader" -0x00100000-0x00600000 : "nand.kernel" -0x00600000-0x06600000 : "nand.rootfs" -0x06600000-0x06e00000 : "nand.configure" -0x06e00000-0x80000000 : "nand.userfs" - -Creating 6 MTD partitions on "mxc_nor_flash.0": -0x00000000-0x00080000 : "Bootloader" -0x00080000-0x00480000 : "nor.Kernel" -0x00480000-0x02280000 : "nor.userfs" -0x02280000-0x03e80000 : "nor.rootfs" -0x01fe0000-0x01fe3000 : "FIS directory" -0x01fff000-0x04000000 : "Redboot config" - -NAND partitions can be recognized enabling in kernel CONFIG_MTD_REDBOOT_PARTS. -For this board, CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK should be set to 2. - -However, the setup in redboot is not correct and does not use the whole flash. - -Better solution is to use the kernel parameter mtdparts. -Here the resulting script to be defined in RedBoot with fconfig: - -load -r -b 0x100000 sbabic/mx35pdk/zImage.2.6.37 -exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nfsroot=192.168.1.1:/opt/eldk-4.2-arm/arm rw ip=dhcp mtdparts=mxc_nand:1m(boot),5m(linux),96m(root),8m(cfg),1938m(user);physmap-flash.0:512k(b),4m(k),30m(u),28m(r)" - -Flashing U-Boot --------------------------------- - -U-Boot should be stored on the NOR flash. - -The boot storage can be select using the switches on the personality board -(SW1-SW2) and on the DEBUG board (SW4-SW10). - -If something goes wrong flashing the bootloader, it is always possible to -recover the board booting from the other device. - -Saving U-Boot in the NOR flash ---------------------------------- - -Check the partition for boot in the NOR flash. Setting the mtdparts as reported, -the boot partition should be /dev/mtd0. - -Creating 6 MTD partitions on "mxc_nor_flash.0": -0x00000000-0x00080000 : "Bootloader" -0x00080000-0x00480000 : "nor.Kernel" -0x00480000-0x02280000 : "nor.userfs" -0x02280000-0x03e80000 : "nor.rootfs" -0x01fe0000-0x01fe3000 : "FIS directory" -0x01fff000-0x04000000 : "Redboot config" - -To erase the whole partition: -$ flash_eraseall /dev/mtd0 - -Writing U-Boot: -dd if=u-boot.bin of=/dev/mtd0 - -To boot from NOR, you have to select the switches as follows: - -Personality board - SW2 all off - SW1 all off - -Debug Board: - SW5 0 - SW6 0 - SW7 0 - SW8 1 - SW9 1 - SW10 0 diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S deleted file mode 100644 index 5dae5597fb..0000000000 --- a/board/freescale/mx35pdk/lowlevel_init.S +++ /dev/null @@ -1,239 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2007, Guennadi Liakhovetski - * - * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include "mx35pdk.h" -#include - -/* - * return soc version - * 0x10: TO1 - * 0x20: TO2 - * 0x30: TO3 - */ -.macro check_soc_version ret, tmp - ldr \tmp, =IIM_BASE_ADDR - ldr \ret, [\tmp, #IIM_SREV] - cmp \ret, #0x00 - moveq \tmp, #ROMPATCH_REV - ldreq \ret, [\tmp] - moveq \ret, \ret, lsl #4 - addne \ret, \ret, #0x10 -.endm - -/* CPLD on CS5 setup */ -.macro init_debug_board - ldr r0, =DBG_BASE_ADDR - ldr r1, =DBG_CSCR_U_CONFIG - str r1, [r0, #0x00] - ldr r1, =DBG_CSCR_L_CONFIG - str r1, [r0, #0x04] - ldr r1, =DBG_CSCR_A_CONFIG - str r1, [r0, #0x08] -.endm - -/* clock setup */ -.macro init_clock - ldr r0, =CCM_BASE_ADDR - - /* default CLKO to 1/32 of the ARM core*/ - ldr r1, [r0, #CLKCTL_COSR] - bic r1, r1, #0x00000FF00 - bic r1, r1, #0x0000000FF - mov r2, #0x00006C00 - add r2, r2, #0x67 - orr r1, r1, r2 - str r1, [r0, #CLKCTL_COSR] - - ldr r2, =CCM_CCMR_CONFIG - str r2, [r0, #CLKCTL_CCMR] - - check_soc_version r1, r2 - cmp r1, #CHIP_REV_2_0 - ldrhs r3, =CCM_MPLL_532_HZ - bhs 1f - ldr r2, [r0, #CLKCTL_PDR0] - tst r2, #CLKMODE_CONSUMER - ldrne r3, =CCM_MPLL_532_HZ /* consumer path*/ - ldreq r3, =CCM_MPLL_399_HZ /* auto path*/ -1: - str r3, [r0, #CLKCTL_MPCTL] - - ldr r1, =CCM_PPLL_300_HZ - str r1, [r0, #CLKCTL_PPCTL] - - ldr r1, =CCM_PDR0_CONFIG - bic r1, r1, #0x800000 - str r1, [r0, #CLKCTL_PDR0] - - ldr r1, [r0, #CLKCTL_CGR0] - orr r1, r1, #0x0C300000 - str r1, [r0, #CLKCTL_CGR0] - - ldr r1, [r0, #CLKCTL_CGR1] - orr r1, r1, #0x00000C00 - orr r1, r1, #0x00000003 - str r1, [r0, #CLKCTL_CGR1] - - ldr r1, [r0, #CLKCTL_CGR2] - orr r1, r1, #0x00C00000 - str r1, [r0, #CLKCTL_CGR2] -.endm - -.macro setup_sdram - ldr r0, =ESDCTL_BASE_ADDR - mov r3, #0x2000 - str r3, [r0, #0x0] - str r3, [r0, #0x8] - - /*ip(r12) has used to save lr register in upper calling*/ - mov fp, lr - - mov r5, #0x00 - mov r2, #0x00 - mov r1, #CSD0_BASE_ADDR - bl setup_sdram_bank - - mov r5, #0x00 - mov r2, #0x00 - mov r1, #CSD1_BASE_ADDR - bl setup_sdram_bank - - mov lr, fp - -1: - ldr r3, =ESDCTL_DELAY_LINE5 - str r3, [r0, #0x30] -.endm - -.globl lowlevel_init -lowlevel_init: - mov r10, lr - - core_init - - init_aips - - init_max - - init_m3if - - init_clock - init_debug_board - - cmp pc, #PHYS_SDRAM_1 - blo init_sdram_start - cmp pc, #(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) - blo skip_sdram_setup - -init_sdram_start: - /*init_sdram*/ - setup_sdram - -skip_sdram_setup: - mov lr, r10 - mov pc, lr - - -/* - * r0: ESDCTL control base, r1: sdram slot base - * r2: DDR type(0:DDR2, 1:MDDR) r3, r4:working base - */ -setup_sdram_bank: - mov r3, #0xE - tst r2, #0x1 - orreq r3, r3, #0x300 /*DDR2*/ - str r3, [r0, #0x10] - bic r3, r3, #0x00A - str r3, [r0, #0x10] - beq 2f - - mov r3, #0x20000 -1: subs r3, r3, #1 - bne 1b - -2: tst r2, #0x1 - ldreq r3, =ESDCTL_DDR2_CONFIG - ldrne r3, =ESDCTL_MDDR_CONFIG - cmp r1, #CSD1_BASE_ADDR - strlo r3, [r0, #0x4] - strhs r3, [r0, #0xC] - - ldr r3, =ESDCTL_0x92220000 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - mov r3, #0xDA - ldr r4, =ESDCTL_PRECHARGE - strb r3, [r1, r4] - - tst r2, #0x1 - bne skip_set_mode - - cmp r1, #CSD1_BASE_ADDR - ldr r3, =ESDCTL_0xB2220000 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - mov r3, #0xDA - ldr r4, =ESDCTL_DDR2_EMR2 - strb r3, [r1, r4] - ldr r4, =ESDCTL_DDR2_EMR3 - strb r3, [r1, r4] - ldr r4, =ESDCTL_DDR2_EN_DLL - strb r3, [r1, r4] - ldr r4, =ESDCTL_DDR2_RESET_DLL - strb r3, [r1, r4] - - ldr r3, =ESDCTL_0x92220000 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - mov r3, #0xDA - ldr r4, =ESDCTL_PRECHARGE - strb r3, [r1, r4] - -skip_set_mode: - cmp r1, #CSD1_BASE_ADDR - ldr r3, =ESDCTL_0xA2220000 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - mov r3, #0xDA - strb r3, [r1] - strb r3, [r1] - - ldr r3, =ESDCTL_0xB2220000 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - tst r2, #0x1 - ldreq r4, =ESDCTL_DDR2_MR - ldrne r4, =ESDCTL_MDDR_MR - mov r3, #0xDA - strb r3, [r1, r4] - ldreq r4, =ESDCTL_DDR2_OCD_DEFAULT - streqb r3, [r1, r4] - ldreq r4, =ESDCTL_DDR2_EN_DLL - ldrne r4, =ESDCTL_MDDR_EMR - strb r3, [r1, r4] - - cmp r1, #CSD1_BASE_ADDR - ldr r3, =ESDCTL_0x82228080 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - - tst r2, #0x1 - moveq r4, #0x20000 - movne r4, #0x200 -1: subs r4, r4, #1 - bne 1b - - str r3, [r1, #0x100] - ldr r4, [r1, #0x100] - cmp r3, r4 - movne r3, #1 - moveq r3, #0 - - mov pc, lr diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c deleted file mode 100644 index fc024c47db..0000000000 --- a/board/freescale/mx35pdk/mx35pdk.c +++ /dev/null @@ -1,293 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2007, Guennadi Liakhovetski - * - * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifndef CONFIG_BOARD_LATE_INIT -#error "CONFIG_BOARD_LATE_INIT must be set for this board" -#endif - -#ifndef CONFIG_BOARD_EARLY_INIT_F -#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board" -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - u32 size1, size2; - - size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); - - gd->ram_size = size1 + size2; - - return 0; -} - -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - - return 0; -} - -#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE) - -static void setup_iomux_i2c(void) -{ - static const iomux_v3_cfg_t i2c1_pads[] = { - NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL), - NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL), - }; - - /* setup pins for I2C1 */ - imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads)); -} - - -static void setup_iomux_spi(void) -{ - static const iomux_v3_cfg_t spi_pads[] = { - MX35_PAD_CSPI1_MOSI__CSPI1_MOSI, - MX35_PAD_CSPI1_MISO__CSPI1_MISO, - MX35_PAD_CSPI1_SS0__CSPI1_SS0, - MX35_PAD_CSPI1_SS1__CSPI1_SS1, - MX35_PAD_CSPI1_SCLK__CSPI1_SCLK, - }; - - imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); -} - -#define USBOTG_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | \ - PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) -#define USBOTG_OUT_PAD_CTRL (PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) - -static void setup_iomux_usbotg(void) -{ - static const iomux_v3_cfg_t usbotg_pads[] = { - NEW_PAD_CTRL(MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, - USBOTG_OUT_PAD_CTRL), - NEW_PAD_CTRL(MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, - USBOTG_IN_PAD_CTRL), - }; - - /* Set up pins for USBOTG. */ - imx_iomux_v3_setup_multiple_pads(usbotg_pads, ARRAY_SIZE(usbotg_pads)); -} - -#define FEC_PAD_CTRL (PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) - -static void setup_iomux_fec(void) -{ - static const iomux_v3_cfg_t fec_pads[] = { - NEW_PAD_CTRL(MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - NEW_PAD_CTRL(MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - NEW_PAD_CTRL(MX35_PAD_FEC_RX_DV__FEC_RX_DV, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - NEW_PAD_CTRL(MX35_PAD_FEC_COL__FEC_COL, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - NEW_PAD_CTRL(MX35_PAD_FEC_RDATA0__FEC_RDATA_0, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - NEW_PAD_CTRL(MX35_PAD_FEC_TDATA0__FEC_TDATA_0, FEC_PAD_CTRL), - NEW_PAD_CTRL(MX35_PAD_FEC_TX_EN__FEC_TX_EN, FEC_PAD_CTRL), - NEW_PAD_CTRL(MX35_PAD_FEC_MDC__FEC_MDC, FEC_PAD_CTRL), - NEW_PAD_CTRL(MX35_PAD_FEC_MDIO__FEC_MDIO, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_22K_UP), - NEW_PAD_CTRL(MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, FEC_PAD_CTRL), - NEW_PAD_CTRL(MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - NEW_PAD_CTRL(MX35_PAD_FEC_CRS__FEC_CRS, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - NEW_PAD_CTRL(MX35_PAD_FEC_RDATA1__FEC_RDATA_1, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - NEW_PAD_CTRL(MX35_PAD_FEC_TDATA1__FEC_TDATA_1, FEC_PAD_CTRL), - NEW_PAD_CTRL(MX35_PAD_FEC_RDATA2__FEC_RDATA_2, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - NEW_PAD_CTRL(MX35_PAD_FEC_TDATA2__FEC_TDATA_2, FEC_PAD_CTRL), - NEW_PAD_CTRL(MX35_PAD_FEC_RDATA3__FEC_RDATA_3, FEC_PAD_CTRL | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - NEW_PAD_CTRL(MX35_PAD_FEC_TDATA3__FEC_TDATA_3, FEC_PAD_CTRL), - }; - - /* setup pins for FEC */ - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); -} - -int board_early_init_f(void) -{ - struct ccm_regs *ccm = - (struct ccm_regs *)IMX_CCM_BASE; - - /* enable clocks */ - writel(readl(&ccm->cgr0) | - MXC_CCM_CGR0_EMI_MASK | - MXC_CCM_CGR0_EDIO_MASK | - MXC_CCM_CGR0_EPIT1_MASK, - &ccm->cgr0); - - writel(readl(&ccm->cgr1) | - MXC_CCM_CGR1_FEC_MASK | - MXC_CCM_CGR1_GPIO1_MASK | - MXC_CCM_CGR1_GPIO2_MASK | - MXC_CCM_CGR1_GPIO3_MASK | - MXC_CCM_CGR1_I2C1_MASK | - MXC_CCM_CGR1_I2C2_MASK | - MXC_CCM_CGR1_IPU_MASK, - &ccm->cgr1); - - /* Setup NAND */ - __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr); - - setup_iomux_i2c(); - setup_iomux_usbotg(); - setup_iomux_fec(); - setup_iomux_spi(); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_MX35_3DS; /* board id for linux */ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -static inline int pmic_detect(void) -{ - unsigned int id; - struct pmic *p = pmic_get("FSL_PMIC"); - if (!p) - return -ENODEV; - - pmic_reg_read(p, REG_IDENTIFICATION, &id); - - id = (id >> 6) & 0x7; - if (id == 0x7) - return 1; - return 0; -} - -u32 get_board_rev(void) -{ - int rev; - - rev = pmic_detect(); - - return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8; -} - -int board_late_init(void) -{ - u8 val; - u32 pmic_val; - struct pmic *p; - int ret; - - ret = pmic_init(I2C_0); - if (ret) - return ret; - - if (pmic_detect()) { - p = pmic_get("FSL_PMIC"); - imx_iomux_v3_setup_pad(MX35_PAD_WDOG_RST__WDOG_WDOG_B); - - pmic_reg_read(p, REG_SETTING_0, &pmic_val); - pmic_reg_write(p, REG_SETTING_0, - pmic_val | VO_1_30V | VO_1_50V); - pmic_reg_read(p, REG_MODE_0, &pmic_val); - pmic_reg_write(p, REG_MODE_0, pmic_val | VGEN3EN); - - imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5); - - gpio_direction_output(IMX_GPIO_NR(1, 5), 1); - } - - val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04; - mc9sdz60_reg_write(MC9SDZ60_REG_GPIO_1, val); - mdelay(200); - - val = mc9sdz60_reg_read(MC9SDZ60_REG_RESET_1) & 0x7F; - mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val); - mdelay(200); - - val |= 0x80; - mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val); - - /* Print board revision */ - printf("Board: MX35 PDK %d.0\n", ((get_board_rev() >> 8) + 1) & 0x0F); - - return 0; -} - -int board_eth_init(struct bd_info *bis) -{ -#if defined(CONFIG_SMC911X) - int rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); - if (rc) - return rc; -#endif - return cpu_eth_init(bis); -} - -#if defined(CONFIG_FSL_ESDHC_IMX) - -struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR}; - -int board_mmc_init(struct bd_info *bis) -{ - static const iomux_v3_cfg_t sdhc1_pads[] = { - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, - }; - - /* configure pins for SDHC1 only */ - imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads)); - - esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); - return fsl_esdhc_initialize(bis, &esdhc_cfg); -} - -int board_mmc_getcd(struct mmc *mmc) -{ - return !(mc9sdz60_reg_read(MC9SDZ60_REG_DES_FLAG) & 0x4); -} -#endif diff --git a/board/freescale/mx35pdk/mx35pdk.h b/board/freescale/mx35pdk/mx35pdk.h deleted file mode 100644 index 0af4b88bfb..0000000000 --- a/board/freescale/mx35pdk/mx35pdk.h +++ /dev/null @@ -1,41 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * - * (c) 2007 Pengutronix, Sascha Hauer - * - * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. - */ - -#ifndef __BOARD_MX35_3STACK_H -#define __BOARD_MX35_3STACK_H - -#define DBG_BASE_ADDR WEIM_CTRL_CS5 -#define DBG_CSCR_U_CONFIG 0x0000D843 -#define DBG_CSCR_L_CONFIG 0x22252521 -#define DBG_CSCR_A_CONFIG 0x22220A00 - -#define CCM_CCMR_CONFIG 0x003F4208 -#define CCM_PDR0_CONFIG 0x00801000 - -/* MEMORY SETTING */ -#define ESDCTL_0x92220000 0x92220000 -#define ESDCTL_0xA2220000 0xA2220000 -#define ESDCTL_0xB2220000 0xB2220000 -#define ESDCTL_0x82228080 0x82228080 - -#define ESDCTL_PRECHARGE 0x00000400 - -#define ESDCTL_MDDR_CONFIG 0x007FFC3F -#define ESDCTL_MDDR_MR 0x00000033 -#define ESDCTL_MDDR_EMR 0x02000000 - -#define ESDCTL_DDR2_CONFIG 0x007FFC3F -#define ESDCTL_DDR2_EMR2 0x04000000 -#define ESDCTL_DDR2_EMR3 0x06000000 -#define ESDCTL_DDR2_EN_DLL 0x02000400 -#define ESDCTL_DDR2_RESET_DLL 0x00000333 -#define ESDCTL_DDR2_MR 0x00000233 -#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780 - -#define ESDCTL_DELAY_LINE5 0x00F49F00 -#endif /* __BOARD_MX35_3STACK_H */ diff --git a/configs/mx35pdk_defconfig b/configs/mx35pdk_defconfig deleted file mode 100644 index ab77fb5c06..0000000000 --- a/configs/mx35pdk_defconfig +++ /dev/null @@ -1,54 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_MX35PDK=y -CONFIG_SYS_TEXT_BASE=0xA0000000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_SECT_SIZE=0x20000 -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_DATE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1m(boot),5m(linux),96m(root),8m(cfg),1938m(user);physmap-flash.0:512k(b),4m(k),30m(u),28m(r)" -CONFIG_EFI_PARTITION=y -# CONFIG_PARTITION_UUIDS is not set -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_ADDR=0xA0080000 -CONFIG_ENV_ADDR_REDUND=0xA00A0000 -CONFIG_MXC_GPIO=y -CONFIG_FSL_ESDHC_IMX=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_MXC=y -CONFIG_MII=y -CONFIG_SMC911X=y -CONFIG_SMC911X_BASE=0xB6000000 -CONFIG_MXC_UART=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 9db4cae1df..79ad0a1b34 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -635,7 +635,7 @@ config MCFUART config MXC_UART bool "IMX serial port support" - depends on ARCH_MX25 || ARCH_MX31 || TARGET_APF27 || TARGET_FLEA3 || TARGET_MX35PDK \ + depends on ARCH_MX25 || ARCH_MX31 || TARGET_APF27 || TARGET_FLEA3 \ || MX5 || MX6 || MX7 || IMX8M help If you have a machine based on a Motorola IMX CPU you diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h deleted file mode 100644 index d2dcc8179b..0000000000 --- a/include/configs/mx35pdk.h +++ /dev/null @@ -1,206 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010, Stefano Babic - * - * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. - * - * Copyright (C) 2007, Guennadi Liakhovetski - * - * Configuration for the MX35pdk Freescale board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - - /* High Level Configuration Options */ -#define CONFIG_MX35 - -#define CONFIG_SYS_FSL_CLK - -/* Set TEXT at the beginning of the NOR flash */ - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) - -/* - * Hardware drivers - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ - -/* - * PMIC Configs - */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_FSL -#define CONFIG_POWER_FSL_MC13892 -#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 -#define CONFIG_RTC_MC13XXX - -/* - * MFD MC9SDZ60 - */ -#define CONFIG_FSL_MC9SDZ60 -#define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR 0x69 - -/* - * UART (console) - */ -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* - * Command definition - */ - -#define CONFIG_NET_RETRY_COUNT 100 - - -#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ - -/* - * Ethernet on the debug board (SMC911) - */ -#define CONFIG_HAS_ETH1 -#define CONFIG_ETHPRIME - -/* - * Ethernet on SOC (FEC) - */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1F - -#define CONFIG_ARP_TIMEOUT 200UL - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* - * Physical Memory Map - */ -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define PHYS_SDRAM_2 CSD1_BASE_ADDR -#define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_GBL_DATA_OFFSET) - -/* - * MTD Command for mtdparts - */ - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ -/* Monitor at beginning of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - -/* Address and size of Redundant Environment Sector */ - -/* - * CFI FLASH driver setup - */ - -/* A non-standard buffered write algorithm */ -#define CONFIG_FLASH_SPANSION_S29WS_N - -/* - * NAND FLASH driver setup - */ -#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) -#define CONFIG_MXC_NAND_HWECC -#define CONFIG_SYS_NAND_LARGEPAGE - -/* EHCI driver */ -#define CONFIG_EHCI_IS_TDI -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_MXC -#define CONFIG_MXC_USB_PORT 0 -#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \ - MXC_EHCI_POWER_PINS_ENABLED | \ - MXC_EHCI_OC_PIN_ACTIVE_LOW) -#define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI) - -/* mmc driver */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 1 - -/* - * Default environment and default scripts - * to update uboot and load kernel - */ - -#define CONFIG_HOSTNAME "mx35pdk" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth1\0" \ - "ethprime=smc911x\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttymxc0,${baudrate}\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "loadaddr=80800000\0" \ - "kernel_addr_r=80800000\0" \ - "hostname=" CONFIG_HOSTNAME "\0" \ - "bootfile=" CONFIG_HOSTNAME "/uImage\0" \ - "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r}\0" \ - "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ - "update=protect off ${uboot_addr} +80000;" \ - "erase ${uboot_addr} +80000;" \ - "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ - "upd=if run load;then echo Updating u-boot;if run update;" \ - "then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - "bootcmd=run net_nfs\0" - -#endif /* __CONFIG_H */