From: Fabio Estevam Date: Wed, 14 Aug 2024 18:28:43 +0000 (-0300) Subject: tqma6: Remove non-DM board code X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20%24style.RelPermalink%20%7D%7D?a=commitdiff_plain;h=93552cc442de7701cda0bb6ac283e2e83d411f5a;p=u-boot.git tqma6: Remove non-DM board code CONFIG_DM_MMC and CONFIG_DM_SPI are alway selected so the mmc and spi board code can be safely removed. Remove it to make the code cleaner. Signed-off-by: Fabio Estevam --- diff --git a/board/tq/tqma6/tqma6.c b/board/tq/tqma6/tqma6.c index 445ce987b6..40369f03e7 100644 --- a/board/tq/tqma6/tqma6.c +++ b/board/tq/tqma6/tqma6.c @@ -19,33 +19,15 @@ #include #include #include -#include -#include #include #include #include #include -#include #include "tqma6_bb.h" DECLARE_GLOBAL_DATA_PTR; -#define USDHC_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define GPIO_OUT_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -#define GPIO_IN_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -#define SPI_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - int dram_init(void) { gd->ram_size = imx_ddr_size(); @@ -55,114 +37,6 @@ int dram_init(void) static const uint16_t tqma6_emmc_dsr = 0x0100; -#ifndef CONFIG_DM_MMC -/* eMMC on USDHCI3 always present */ -static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = { - NEW_PAD_CTRL(MX6_PAD_SD3_CLK__SD3_CLK, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD3_CMD__SD3_CMD, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD3_DAT0__SD3_DATA0, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD3_DAT1__SD3_DATA1, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD3_DAT2__SD3_DATA2, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD3_DAT3__SD3_DATA3, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD3_DAT4__SD3_DATA4, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD3_DAT5__SD3_DATA5, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD3_DAT6__SD3_DATA6, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD3_DAT7__SD3_DATA7, USDHC_PAD_CTRL), - /* eMMC reset */ - NEW_PAD_CTRL(MX6_PAD_SD3_RST__SD3_RESET, GPIO_OUT_PAD_CTRL), -}; - -/* - * According to board_mmc_init() the following map is done: - * (U-Boot device node) (Physical Port) - * mmc0 eMMC (SD3) on TQMa6 - * mmc1 .. n optional slots used on baseboard - */ -struct fsl_esdhc_cfg tqma6_usdhc_cfg = { - .esdhc_base = USDHC3_BASE_ADDR, - .max_bus_width = 8, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - if (cfg->esdhc_base == USDHC3_BASE_ADDR) - /* eMMC/uSDHC3 is always present */ - ret = 1; - else - ret = tqma6_bb_board_mmc_getcd(mmc); - - return ret; -} - -int board_mmc_getwp(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - if (cfg->esdhc_base == USDHC3_BASE_ADDR) - /* eMMC/uSDHC3 is always present */ - ret = 0; - else - ret = tqma6_bb_board_mmc_getwp(mmc); - - return ret; -} - -int board_mmc_init(struct bd_info *bis) -{ - imx_iomux_v3_setup_multiple_pads(tqma6_usdhc3_pads, - ARRAY_SIZE(tqma6_usdhc3_pads)); - tqma6_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - if (fsl_esdhc_initialize(bis, &tqma6_usdhc_cfg)) { - puts("Warning: failed to initialize eMMC dev\n"); - } else { - struct mmc *mmc = find_mmc_device(0); - if (mmc) - mmc_set_dsr(mmc, tqma6_emmc_dsr); - } - - tqma6_bb_board_mmc_init(bis); - - return 0; -} -#endif - -#ifndef CONFIG_DM_SPI -static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = { - /* SS1 */ - NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL), -}; - -#define TQMA6_SF_CS_GPIO IMX_GPIO_NR(3, 19) - -static unsigned const tqma6_ecspi1_cs[] = { - TQMA6_SF_CS_GPIO, -}; - -__weak void tqma6_iomuxc_spi(void) -{ - unsigned i; - - for (i = 0; i < ARRAY_SIZE(tqma6_ecspi1_cs); ++i) - gpio_direction_output(tqma6_ecspi1_cs[i], 1); - imx_iomux_v3_setup_multiple_pads(tqma6_ecspi1_pads, - ARRAY_SIZE(tqma6_ecspi1_pads)); -} - -#if defined(CONFIG_SF_DEFAULT_BUS) && defined(CONFIG_SF_DEFAULT_CS) -int board_spi_cs_gpio(unsigned bus, unsigned cs) -{ - return ((bus == CONFIG_SF_DEFAULT_BUS) && - (cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1; -} -#endif -#endif int board_early_init_f(void) {