From: Wan Yee Lau Date: Mon, 5 Feb 2024 03:47:16 +0000 (+0800) Subject: drivers: misc: Add socfpga_dtreg driver for Intel SoCFPGA X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20%24style.RelPermalink%20%7D%7D?a=commitdiff_plain;h=3f190c55a4211215914126b74357344342329943;p=u-boot.git drivers: misc: Add socfpga_dtreg driver for Intel SoCFPGA Add socfpga_dtreg driver enablement for Intel SoCFPGA. Signed-off-by: Wan Yee Lau Reviewed-by: Tien Fong Chee --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 01d6556c42..16864f8afa 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1116,6 +1116,8 @@ config ARCH_SOCFPGA select SPL_LIBGENERIC_SUPPORT select SPL_OF_CONTROL select SPL_SEPARATE_BSS if TARGET_SOCFPGA_SOC64 + select SPL_DRIVERS_MISC if TARGET_SOCFPGA_SOC64 + select SPL_SOCFPGA_DT_REG if TARGET_SOCFPGA_SOC64 select SPL_SERIAL select SPL_SYSRESET select SPL_WATCHDOG diff --git a/doc/device-tree-bindings/misc/socfpga_dtreg.txt b/doc/device-tree-bindings/misc/socfpga_dtreg.txt new file mode 100644 index 0000000000..cf40fdd2da --- /dev/null +++ b/doc/device-tree-bindings/misc/socfpga_dtreg.txt @@ -0,0 +1,80 @@ +* Firewall and privilege register settings in device tree + +Required properties: +-------------------- + +- compatible: should contain "intel,socfpga-dtreg" +- reg: Physical base address and size of block register. +- intel,offset-settings: 32-bit offset address of block register, + followed by 32-bit value settings and + the masking bits, only masking bit + set to 1 allows modification. + +The device tree node which describes secure and privilege register access +configuration in compile time. + +Most of these registers are expected to work except for the case which some +registers configuration are required for granting access to some other +registers, for example CCU registers have to be properly configured before +allowing register configuration access to fpga2sdram firewall as shown in +below example. + +Some registers depend on runtime data for proper configuration are expected +to be part of driver that generating these data for example configuration for +soc_noc_fw_ddr_mpu_inst_0_ddr_scr block register depend on DDR size parsed from +memory device tree node. + +Please refer details of tested examples below for both fpga2sdram and QoS +configuration with default reset value and the comments. + +Example: +-------- + +Configuration for multiple dtreg node support in device tree: + + socfpga_dtreg0: socfpga-dtreg0 { + compatible = "intel,socfpga-dtreg"; + #address-cells = <1>; + #size-cells = <1>; + bootph-all; + + coh_cpu0_bypass_OC_Firewall_main_Firewall@f7100200 { + reg = <0xf7100200 0x00000014>; + intel,offset-settings = + /* + * Disable ocram security at CCU for + * non secure access + */ + <0x0000004 0x8000ffff 0xe007ffff>, + <0x0000008 0x8000ffff 0xe007ffff>, + <0x000000c 0x8000ffff 0xe007ffff>, + <0x0000010 0x8000ffff 0xe007ffff>; + bootph-all; + }; + }; + + socfpga_dtreg1: socfpga-dtreg1 { + compatible = "intel,socfpga-dtreg"; + #address-cells = <1>; + #size-cells = <1>; + bootph-all; + + soc_noc_fw_mpfe_csr_inst_0_mpfe_scr@f8020000 { + reg = <0xf8020000 0x0000001c>; + intel,offset-settings = + /* Disable MPFE firewall for SMMU */ + <0x00000000 0x00010101 0x00010101>, + /* + * Disable MPFE firewall for HMC + * adapter + */ + <0x00000004 0x00000001 0x00010101>; + bootph-all; + }; + }; + +To call the nodes use: + + ret = uclass_get_device_by_name(UCLASS_NOP, "socfpga-dtreg0", &dev); + ret = uclass_get_device_by_name(UCLASS_NOP, "socfpga-dtreg1", &dev); + diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index f11ce72525..98043fc2ff 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -689,4 +689,11 @@ config SL28CPLD the base driver which provides common access methods for the sub-drivers. +config SPL_SOCFPGA_DT_REG + bool "Enable register setting from device tree in SPL" + depends on SPL + help + Enable register setting from device tree. This also + provides user a clean interface and all register settings are + centralized in one place, device tree. endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 0432db6ed1..1522f6c3b7 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -90,3 +90,4 @@ obj-$(CONFIG_K3_AVS0) += k3_avs.o obj-$(CONFIG_ESM_K3) += k3_esm.o obj-$(CONFIG_ESM_PMIC) += esm_pmic.o obj-$(CONFIG_SL28CPLD) += sl28cpld.o +obj-$(CONFIG_SPL_SOCFPGA_SEC_REG) += socfpga_dtreg.o diff --git a/drivers/misc/socfpga_dtreg.c b/drivers/misc/socfpga_dtreg.c new file mode 100644 index 0000000000..ea5d0bcdf5 --- /dev/null +++ b/drivers/misc/socfpga_dtreg.c @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2024 Intel Corporation + */ + +#include +#include +#include +#include + +#define NUMBER_OF_ELEMENTS 3 + +static int socfpga_dtreg_probe(struct udevice *dev) +{ + const fdt32_t *list; + fdt_addr_t offset, base; + fdt_val_t val, read_val, mask, set_mask; + int size, i; + u32 blk_sz, reg; + ofnode node; + const char *name = NULL; + + debug("%s(dev=%p)\n", __func__, dev); + + if (!dev_has_ofnode(dev)) + return 0; + + dev_for_each_subnode(node, dev) { + name = ofnode_get_name(node); + if (!name) + return -EINVAL; + + if (ofnode_read_u32_index(node, "reg", 1, &blk_sz)) + return -EINVAL; + + base = ofnode_get_addr(node); + if (base == FDT_ADDR_T_NONE) + return -EINVAL; + + debug("%s(node_offset 0x%lx node_name %s ", __func__, + node.of_offset, name); + debug("node addr 0x%llx blk sz 0x%x)\n", base, blk_sz); + + list = ofnode_read_prop(node, "intel,offset-settings", &size); + if (!list) + return -EINVAL; + + debug("%s(intel,offset-settings property size=%x)\n", __func__, + size); + size /= sizeof(*list) * NUMBER_OF_ELEMENTS; + + /* + * First element: offset + * Second element: val + * Third element: mask + */ + for (i = 0; i < size; i++) { + offset = fdt32_to_cpu(*list++); + val = fdt32_to_cpu(*list++); + + /* Reads the masking bit value from the list */ + mask = fdt32_to_cpu(*list++); + + /* + * Reads out the offsets, value and masking bits + * Ex: <0x00000000 0x00000230 0xffffffff> + */ + debug("%s(intel,offset-settings 0x%llx : 0x%llx : 0x%llx)\n", + __func__, offset, val, mask); + + if (blk_sz < offset + SZ_4) { + printf("%s: Overflow as offset 0x%llx or reg", + __func__, offset); + printf(" write is more than block size 0x%x\n", + blk_sz); + return -EINVAL; + } + + if (mask != 0) { + if (mask == 0xffffffff) { + reg = base + offset; + writel(val, (uintptr_t)reg); + } else { + /* Mask the value with the masking bits */ + set_mask = val & mask; + + reg = base + offset; + + /* Clears and sets specific bits in the register */ + clrsetbits_le32((uintptr_t)reg, mask, set_mask); + } + } + + read_val = readl((uintptr_t)reg); + + /* Reads out the register, masked value and the read value */ + debug("%s(reg 0x%x = wr : 0x%llx rd : 0x%llx)\n", + __func__, reg, set_mask, read_val); + } + } + + return 0; +}; + +static const struct udevice_id socfpga_dtreg_ids[] = { + {.compatible = "intel,socfpga-dtreg"}, + { } +}; + +U_BOOT_DRIVER(socfpga_dtreg) = { + .name = "socfpga-dtreg", + .id = UCLASS_NOP, + .of_match = socfpga_dtreg_ids, + .probe = socfpga_dtreg_probe, +};